A SAPinst GUI question - can't connect to port 21212

Hello,
I'm trying to install a BW 3.0B system 'BSB' using Linux/Oracle on 32-bit Intel hardware. The Linux is Suse Linux Enterprise Server 9 (SLES9). The Oracle is 9.2.
I was able to see the 1st SAP Installation GUI screen. The two fields on the screen appeared as follows:
Installation Host: localhost
Port: 21212
But when I clicked the 'OK' button, nothing happened. The screen and the two fields remained the same. The messages from the UNIX install session, on two attempts using root id, are attached. There is nothing in the sapinst.log file in the install directory /INSTBW30B/CI. My Linux Administrator thought the SAPinst listener is not working.
The SAPinst I used is version 1.0, from a SAP BW 3.0B Installation CD, published in 2002.
Please advise. Thanks.
Regards,
Jack Wu
lsapd002 /home/bsbadm> su -
Password:
lsapd002:~ # umask
0022
lsapd002:~ # export DISPLAY=10.101.62.19:0.0
lsapd002:~ # export JAVA_HOME=/INSTBW30B/JAVA/j2sdk1.4.2_09
lsapd002:~ # export PATH=$JAVA_HOME/bin:$JAVA_HOME/jre/bin:$PATH
lsapd002:~ # export LD_LIBRARY_PATH=/sapmnt/BSB/exe
lsapd002:~ # export LD_ASSUME_KERNEL=2.4.1
lsapd002:~ # export SAPINST_DIR=/INSTBW30B/CI
lsapd002:~ #
lsapd002:~ # cd /INSTBW30B/CI
lsapd002:/INSTBW30B/CI #
lsapd002:/INSTBW30B/CI # ./startinstgui.sh
Log file: /INSTBW30B/CI/instgui.log
2005.10.19 08:45:15: JVM version is '1.4.2_09' (1.4)
2005.10.19 08:45:15: InstGui started.
Setting javax.swing.plaf.metal.MetalLookAndFeel at com.sap.ins.gui.Main.setPLAF(Main.java:311)
2005.10.19 08:45:16: SAPinst GUI Version: 2002/03/13 //bc/dev/src/ins/SAPINST/impl/src/gui/src/com/sap/ins/gui
addXMLListener for sapinstgui at com.sap.ins.gui.xml.XMLParser.addXMLListener(XMLParser.java:28)
addXMLListener for sapinstlog at com.sap.ins.gui.xml.XMLParser.addXMLListener(XMLParser.java:28)
addXMLListener for sapinstfile at com.sap.ins.gui.xml.XMLParser.addXMLListener(XMLParser.java:28)
addXMLListener for sapinstalert at com.sap.ins.gui.xml.XMLParser.addXMLListener(XMLParser.java:28)
addXMLListener for sapinstguilogon at com.sap.ins.gui.xml.XMLParser.addXMLListener(XMLParser.java:28)
Using In-Q-My XML parser at com.sap.ins.gui.xml.XMLParser.setParser(XMLParser.java:317)
Connecting to localhost:21212 at com.sap.ins.gui.network.Thread.connect(Thread.java:91)
Not connected. at com.sap.ins.gui.network.Thread.connect(Thread.java:101)
Connecting to localhost:21212 at com.sap.ins.gui.network.Thread.connect(Thread.java:91)
Not connected. at com.sap.ins.gui.network.Thread.connect(Thread.java:101)
Connecting to localhost:21212 at com.sap.ins.gui.network.Thread.connect(Thread.java:91)
Not connected. at com.sap.ins.gui.network.Thread.connect(Thread.java:101)
Connecting to lsapd002:21212 at com.sap.ins.gui.network.Thread.connect(Thread.java:91)
Not connected. at com.sap.ins.gui.network.Thread.connect(Thread.java:101)
lsapd002:/INSTBW30B/CI #
lsapd002:/INSTBW30B/CI # telnet lsapd002 21212
Trying 10.48.110.58...
telnet: connect to address 10.48.110.58: Connection refused
lsapd002:/INSTBW30B/CI #
lsapd002:/INSTBW30B/CI # ./startinstgui.sh -port 21212
Log file: /INSTBW30B/CI/instgui.log
2005.10.19 09:41:16: JVM version is '1.4.2_09' (1.4)
2005.10.19 09:41:16: InstGui started.
Setting javax.swing.plaf.metal.MetalLookAndFeel at com.sap.ins.gui.Main.setPLAF(Main.java:311)
2005.10.19 09:41:16: SAPinst GUI Version: 2002/03/13 //bc/dev/src/ins/SAPINST/impl/src/gui/src/com/sap/ins/gui
addXMLListener for sapinstgui at com.sap.ins.gui.xml.XMLParser.addXMLListener(XMLParser.java:28)
addXMLListener for sapinstlog at com.sap.ins.gui.xml.XMLParser.addXMLListener(XMLParser.java:28)
addXMLListener for sapinstfile at com.sap.ins.gui.xml.XMLParser.addXMLListener(XMLParser.java:28)
addXMLListener for sapinstalert at com.sap.ins.gui.xml.XMLParser.addXMLListener(XMLParser.java:28)
addXMLListener for sapinstguilogon at com.sap.ins.gui.xml.XMLParser.addXMLListener(XMLParser.java:28)
Using In-Q-My XML parser at com.sap.ins.gui.xml.XMLParser.setParser(XMLParser.java:317)
Connecting to localhost:21212 at com.sap.ins.gui.network.Thread.connect(Thread.java:91)
Not connected. at com.sap.ins.gui.network.Thread.connect(Thread.java:101)
Connecting to localhost:21212 at com.sap.ins.gui.network.Thread.connect(Thread.java:91)
Not connected. at com.sap.ins.gui.network.Thread.connect(Thread.java:101)

Hello Daniel,
Thanks for the quick reply. The following are the whole story:
1. When I started, I followed the SAP "BW 3.0B Installation Guide on UNIX/Oracle" and SAP note 580772. After getting the error message "Floating point exception", I added the missing environment variable LD_ASSUME_KERNEL=2.4.1 according SAP note 797084.
2. Then I tried again:
lsapd002:/INSTBW30B/CI # /sapcd/KERBW30B/SAPINST/UNIX/LINUX_32/INSTALL
This time I got different error messages:
ERROR 2005-10-18 10:50:23 [syuxcnodut.cpp:589]
 CSyNodeUtils::isExistingWithType(iastring, bool, ISyNode::eNodeType)
FSL-02013 Unable to access file /INSTBW30B/CI/keydb.1.xml: Success.
ERROR 2005-10-18 10:50:24 [iaxxcsihlp.hpp:344]
 main()
FCO-00034 An error occurred during the installation. Problem: caught an unexpected exception.
The error message FSL-02013 is confusing. Was it successful or not? It appears not. There is a keydb.xml in the installation directory /INSTBW30B/CI. But for unknown reason, sapinst couldn't copy it to create keydb.1.xml. Also, I'm not sure whether FSL-02013 caused FCO-00034, or the two messages are not related?
3. I looked into the "SAPinst Troubleshooting Guide v 1.20 5/27/2002", found a symptom on p.11, followed the solution part 1:
lsapd002:/INSTBW30B/CI # ./sapinst SAPINST_NO_GUISTART=true
I got the same error messages as in Step 2.
4. I tried to fool the installer by doing manually:
lsapd002:/INSTBW30B/CI # cp -p keydb.xml keydb.1.xml
5. Then tried the installation again
lsapd002:/INSTBW30B/CI # ./sapinst
I got similar, but not identical error messages
ERROR 2005-10-18 16:38:18 [syuxcnodut.cpp:589]
 CSyNodeUtils::isExistingWithType(iastring, bool, ISyNode::eNodeType)
FSL-02013 Unable to access file /INSTBW30B/CI/keydb.2.xml: Success.
ERROR 2005-10-18 16:38:18 [iaxxcsihlp.hpp:344]
 main()
FCO-00034 An error occurred during the installation. Problem: caught an unexpected exception.
Please notice that the FSL-02013 complains about keydb.2.xml this time.
6. Then I gave up on solution part 1 in the "SAPinst Troubleshooting Guide" and continued with solution part 2, which is to run the shell script startinstgui.sh. After having difficulty with port 21212, I posted the question in the SDN Forum on 10/19/2005.
According to your reply, startinstgui.sh is just running the GUI which isn't really the installation. So I still need to resolve the errors with sapinst, i.e. FSL-02013 and FCO-00034. Any suggestion?
Regards,
Jack Wu

Similar Messages

Newbie question: can I connect an USB external HD to an iPad?

Hi,
I'm still deciding if I should buy an iPad or not and one of the questions I have is if I can connect an USB external HD to an iPad.
Can you help me please?
Thanks

abarrote wrote:
one of the questions I have is if I can connect an USB external HD to an iPad.
no.
JGG

Solaris 10,oracle 10g question- can't connect with non-dba user

Hi
I've installed the Oracle10g suite, enterprise edition ( 10.2.0.1). I've created a database called qa10g, which I can connect to as user 'oracle' once I export the ORACLE_SID and the ORACLE_HOME
export ORACLE_HOME=/oracle/10g2
export ORACLE_SID=qa10g
then I type in the following at it puts me into sqlplus:
$ORACLE_HOME/bin/sqlplus system/system
so that works fine..now whan I try to log in as another user that isn't a member of the dba group, and I export the ORACLE_HOME and ORACLE_SID variables, I can't get in to the database using $ORACLE_HOME/bin/sqlplus system/system, I get the following errors:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Enter user-name:
BUT, when I put the connector string at the end, I can get in:
$ORACLE_HOME/bin/sqlplus system/system@qa10g
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, Oracle Label Security, OLAP and Data Mining Scoring Engin
e options
SQL>
so obviously, it is an enviromnet variable that isn't getting set properly, perhaps even ORACLE_SID=qa10g isn't working properly for the non-dba user ( in this case, the user is called ctronsys)
for the work I need to do on this databse, I need to have the user I select to be able to log into the database with sqlplus commands like the ones listed above, without the connector string added at the end..the SID gets exported first..
any help would be greatly appreciated, I'm a newbie to Oracle!
thanks!
Rob

There is a possibility that you could be hitting bug 4516865....
Bug 4516865 "WRONG PERMISSIONS AFTER INSTALLATION IN OH AND SUBSEQUENT DIRECTORIES".
Described in <Note.4516865.8> Bug 4516865 - Wrong permissions after install of 10gR2 (10.2.0.1)
-Ramesh

Can't Connect to SMP on port 8080

Hello,
I have 2 SMP 3.0 SP06 servers, one installed in remote server "azure server"and the other o is installed internally in local server that doesn't have an internet connection.
I can connect to the remote server , I can so the following :
- open admin page
-open integration gateway management page
- telnet port 8080 and port 8083
-register client on application and execute OData services from Advanced REST Client
but when I'm trying to do the same on SMP installed on the local server , I am only able to
- open admin page
- open integration gateway management page
- telnet port 8083 only
but I can't :
- telnet port 8083
- register client on application and execute OData services from Advanced REST Client, as this is done through port 8080.
I executed the command " netstat -a | find "8080" "
and it has the same result on both servers :
screenshot from local server, the other server on azure has the same result.
I have stopped and started SMP services, and still can't connect to port 8080.
I added a role in firewall for port 8080 to allow connection but still same issue, I even disabled the firewall with no hope.
this is screenshot from Advanced REST client, it gives no response after timeout:
screenshot from telnet command:
Am I missing something ?
Thanks,
Hossam

What do you see when you run?
http://localsmpserverip:8080
https://localsmpserverip:8081
when I tried to access the two links :
http://localsmpserverip:8080
https://localsmpserverip:8081
it gives me after timeout this :
but when I tried to access:
https://localsmpserverip:8083
it downloaded a file.
and as I mentioned I can access the cockpit and telnet port 8083.
do you see the same PID for all SMP ports?
" netstat -a | find "8080"
" netstat -a | find "8081"
" netstat -a | find "8082"
" netstat -a | find "8083"
8080 might being used by some other service.
they all used by java.exe and not used by any other process
You can achieve above with HTTPS (secure connection) and 8081 as well.
I tried to register using port 8081 same response :

Server error, cannot connect to port 110

Hello Support,
I'm trying to set up a mail account but can't connect to port 110. The mail account works on my old powerbook. I've tried changing the settings to 111, 125 etc. No luck.
What am I doing wrong???
Please help...

I'd call your ISP and go through your settings with them. It's likely that something in your setup is incorrect, or they changed their server to require new settings recently.
Mulder

I am new to the Apple world and yesterday i bought an APPLE IPAD (4th Gen) .. My Question is "Can we connect a flash drive to the IPAD4 and transfer pdf files to and fro"??

Hi all,
I am a newbie to the Apple World and Yesterday I bought an APPLE IPAD (4th Generation).. My primary purpose is to read pdf files on IPAD4.
I have 3 questions ..
1. Can we connect a usb flash drive to the ipad4 and read pdf files from it?
2. I am using windows since 2000 and accustomed to the file explorer and file management in it. Can I get such kind of environment in IPAD4 ?
3. Do I have to sync the IPAD too often?
Regards,
Manikanth

Sandisk has recently come out with a device
http://www.sandisk.com/products/wireless/flash-drive/
Never used it so I can't comment on whether or not it works well. There are very few devices out there that allow file transfer without going through iTunes or via the internet. IMHO, one real weakness of the iPad, great for consuming data, however not very fully featured when it comes to moving data around, especially if that data doesn't come from iTunes or other online source.
there is also a device called a WiDrive
http://www.kingston.com/us/usb/wireless
that is also a wireless drive for iPads.

Question: What makes of projectors can be connected to MacBook

Question: What makes of projectors can be connected to MacBook, also what kind of cable do I need?

Hi,
Modbus is restricted to addressing 247 devices on one data link, which limits the number of field devices that may be connected to a master station.
However, if you want to increase the number of slaves, you may use MODBUS/TCP.
Here is a link that might help you:
http://modbus.control.com/thread/1026247380.
The Schneider electric 174CEV30010 Modbus to Ethernet bridge is capable of addressing Modbus slaves from 1 to 247.
The actual number of devices which can be physically connected depends on the medium used and not on the fact it is Modbus.
Some examples:
RS232 is a 2 device point to point connection when using copper, however when using fiber (or other modems) it is possible to connect up to the maximum of 247 devices.
RS485 is multi-drop and supports 32 devices on a single network. When a repeater is used, on copper wire, the number of devices can usually be increased to 64.
Hope this helps.
Regards,
Rohan Sood
Applications Engineer
National Instruments

MySQL - Another 'Can't connect through mysql.sock' question...

Hey, folks.
So I'm trying to install MySQL to run with PHP on my PowerBook G4 (running 10.4.7, non-server edition) to use it to test out a shopping cart program for a website I'm building.
I had it working as of Monday, when I installed it, got all the permissions set, built the necessary tables, and changed the root password (and logged in just to make sure it worked before retiring for the night)...but today I realized that I had somehow installed the wrong version of MySQL (I connected to it earlier today and discovered it was 4.026 - and I needed to be running MySQL 4.1.20, in order to be running the same version as my webhost).
So I decided to upgrade. I downloaded and installed the 4.1.20 file, followed the directions about creating the system tables, changed permissions via sudo chown -R mysql:mysql data...and now, when I go to change the root user password (just to make sure it's still the same as it was), I get the following error:
error: 'Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)'
Check that mysqld is running and that the socket: '/tmp/mysql.sock' exists!
This error also occurs when I try to simply startup MySQL. I also now find I can't connect via MySQL Admin, either - it gives me the same error. Pinging the host works, however.
Sooo...anyone have any ideas? I've read up on the forums re: Apple changing the socket to /var/mysql/mysql.sock as of 10.4.4, but it seems that would have affected me earlier this week when I was running the previous version of MySQL, too (I certainly haven't upgraded the OS since then).
Regardless, I can't connect through MySQL Admin using the /var/mysql/mysql.sock socket, anyway...nor the standard /tmp/mysql.sock.
Any thoughts on what might be causing this? I should confess, I'm well-versed in DOS (ugh), but UNIX is not really my strong suit, so I'm still figuring out how to get around in the Terminal...
Thanks so much for any input you can give me!
(Oh, one more thing, since it'll probably come up - I'm not currently connecting via PHP, but I will be eventually. Right now, I just want to be able to change my root password, and login from the Terminal)!
Thanks again!\
PowerBook G4 1GHz 15 Mac OS X (10.4.7)

Alright, folks.
Somehow my computer has fixed itself. After wiping the mysql directories entirely, then reinstalling, I was still getting the same error.
After going back to the original "MySQL-On-Mac" site at Marc Liyanage's entropy.ch site & following some of the instructions there, somehow my problem seems to have fixed itself.
I wish I could tell you what the solution was (to benefit anyone else having this problem), but since I was simply following the unix commands listed there (without much explanation, at times, as to what they were doing), I just know that somehow it worked.
(But if I had to make a guess, I think it had to do with starting the server via sudo ./bin/mysqld_safe &)...

Question:gui wizard can't startup (weblogic 8.16 as5)??

platform:as5 weblogic8.16
./server816_linux32.bin
when i install weblogic8.16,the gui wizard can't startup , only text console wizard display
the platform as5
but i instal it in as4 , gui wizard normal startup
so why that??how can i solve this problem??

platform:as5 weblogic8.16
./server816_linux32.bin
when i install weblogic8.16,the gui wizard can't startup , only text console wizard display
the platform as5
but i instal it in as4 , gui wizard normal startup
so why that??how can i solve this problem??

Can not connect outside of Lan to with rtsp PVC2300

I have the following cameras set up at my office
1 - PVC2300
2 - WVC54GC
3 - AXIS 225FD
I have a BEFSR81 Router
I have a computer on Windows XP running the surv software to record. Everything with that is good.
I also have 2 desktops.
I have been playing around with the rtsp feed with the pvc2300, but have run into a few problems.
1(a). I can not connect outside of the LAN with RTSP with either the VLC player or quicktime. It connects and asks for a password and then just hangs.
The PVC 2300 local address is 192.168.1.102 with ports 554, 5000-5010, and 6970-6999 forwarded on the router. What am I missing?
1(b) I can successfully connect with my blackberry bold, although when I try to change the default port (554) to something else (I would like to RTSP my the AXIS camera as well, so I will need a different port) it connects on my bold, but then says server is unresponsive. What am I missing here?
2. The voice with the PVC 2300 using http outside of the LAN (internet) lags quite baddly and is choppy. This happens without fail when I have all 4 cameras running, which I understand is upload bandwidth problem. But it also happens when I connect to just the PVC2300. I do have a connection to all 4 cameras inside the LAN to the XP running the surv software, but that is it. Is the my router acting buggy? I have unplugged the router for 5 sec, and it fixed it for a while, but it always comes back. I have donwloaded the latest firmware for the router and PVC 2300 and that didnt seem ot fix it either. Suggestions?
3. This is more of a question. I know the mobile streaming of the PVC 2300 does not include voice. Is there an app or way that I can just get it to my Blackberry. Even if I didnt get the video, voice is sometimes more important to me.
I hope Ive been clear enough in my description, Im very self taught (google is amazing), but I am in no way a techy.
Thank you in advace for your help.
Colin

Glad to hear you are successfully using the SWVMS16. That program is really cool and useful. I just cant tell you how that model of Linksys Router can work for you here (that is not a model we support on this community as its not small business)
Regarding RTSP access, are you also including the mobile.sdp in the URL?
RTSP:///mobile.sdp I noticed in the camera GUI with the newer firmware, you can specify an access code under mobile settings after checking the enable mobile streaming box. That word may be what you have to include, so check that too...
Try this locally first and then remotely is the easiest way to see if you got it right, then it just becomes a routing or firewall issue to figure out.
But your forwarded ports look right and should be opened.
Under advanced settings, you can define an alternate HTTP, HTTPS or RTSP port

How can I connect with SAP NetWeaver 7.01 SR1 SP3 ABAP Developer Edition

Hello together,
I downloaded and installed the SAP NetWeaver 7.01 SR1 SP3 ABAP Developer Edition on a virtual client.
I toke a long period to finish the installation.
Now some questions to use this system in the right way:
1.) How can I get a "developer license" which do not expire? Because the link http://www.sap.com/minisap seems to be not ok.
2.) How can I connect via network with the sap system? the application server is running on a vm client with a static ip i.e. 192.168.1.5. And my laptop gets a ip in the same range. I have installed the gui on my laptop and tried to connect with the system. But it does not work! I used as application server the ip of the virtual machine. I use the gui witch is installed on the same host like the application it works (with localhost as application server adress)
3.) Where can I download the newest version of the SAP Gui? I do not have a service marktplace account? Is it possible?
4.) I read in the documentation that it should be possible to reach the sap system also with web dynpro: http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000
But it does not work. I got an error message: Service cannot be reached
Note
The termination occurred in system NSP with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
Regards
Christian

I fixed in the meantime the second problem. It was a problem with my local firewall. But the other three points are still open.
Thank in advance for your help

Can we connect to any SAP system if we have connection details.

Hi Experts,
Can we connect to any SAP system if we have connection details.
In this thread I found Diego Lombardini asking connection details.
Needed help on this report
I am working in ABAP for couple of years but donu2019t have much idea about connection to SAP system, Please let me know how it is possible .
High points will be rewarded for any helpful answer.
Regards
Bikas

Hi Bikas,
That reply is just because Diego got irritated by Ravi asking the same question in many threads many times .
Otherwise if a SAP server is not secureed using secureclient you can always connect to that SAP system using the internet and your own SAP GUI ( perhaps based on the GUI compatibility )
But i bet, nobody will reveal SAP server as open for you.
Cheers
Kothand

Can not connect to Image Browser

Can not connect to Image Browser. Try to open again but no results.

Hi garyrandall,
I'm sorry to hear of the difficulty you've encountered with the transfer of images from your Canon camera.
Please reply with the Camera model you're using and the operating system on your computer.
Please include any error messages you receive.
We look forward to hearing from you!
Richard
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Adobe cloud application manager - can not connect to internet

To ADOBE - The Adode cloud Order no is DSSY006786009DT and is current
The Adobe cloud application manager - can not connect to internet even though there is internet connection and says it might be time zone error but that is correct - Sydney Australia
Question:
1. Is anybody else having this problem
2. How do we fix
I already changed the time zone east coast US - did not change anything
Could it be a corrupt program - thus requiring to reinstall program Application manager
I am using Windows 7.
It has been like it for ten days - It asks to log in everytime I turn computer on
All programs in Creative Cloud work
Any suggestions and solution
Online help and phone help had no solutions other than what I suggested - that is reload application manager
Thanks for help
Ian Cleland

The Creative Cloud File Synching was just offline, should be online now again.
See top off: http://forums.adobe.com/community/creative_cloud/creative_cloud_connection
Maybe that was your problem.

When I try to turn on my iPhone 4, it wouldn't turn on unless if I use an iPad Charger. When it will turn on. I can't connect to any WiFi Services or my Service Provider, I can't text or call anyone. When I unplug my iPhone 4 it'll just shut off.

So when I try to plug in My iPhone 4 to any plug it won't turn on or charge unless if I use an iPad charger. When I do get to turn it on. My Phone will Standby for a few seconds( While I'm Typing my 4-Digit Code) then it'll unlock and go to the home screen. Once I'm on the home Screen I can't Call, Text or Email anyone because my iPhone Can't detect any Wifi Hotspots and it also can't connect to my Service Provider, It'll just Say "Searching...". The non-internet apps work perfectly fine. So since I was able to use Just an iPad Charger to turn on my iPhone 4, I tried a Regular iPhone charger that were plugged into a wall or my computer. When its Plugged in, my iPhone will turn on ( Showing the Apple Logo) then turn back off. It'll constanly do this only when it's plugged into a Regular iPhone Charger, Either plugged into a Wall Socket or my Computer. So I Tried to Restore the Phone by using some of the Methods, given by other iPhone 4 Users, non of them worked. My iPhone won't Restart, Restore, Turn on without a Charger, Be Detected on my Computer and Detect my Service Provider. I really need help to fix my iPhone 4. I'm really not sure if it's a Malfunction with the Software on the iPhone, if my Sim Card is Broken. if the System is Corrupted but it only happens Rarely.
Thank you. If you're Reading this. Please Respond.
I need useful information.
If you'd like to Contact me, and give some useful information or ask me any Questions.
Contact me Through my EMAIL : [email protected]

Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

A SAPinst GUI question - can't connect to port 21212

Similar Messages

Maybe you are looking for