A schedule cannot be enabled for a workbook with no external data sources'

Hi
I have uploaded excel report with data model , but when i click on ,anage data refresh link it is showing shedular disable.
I have check logs then I am getting analytics server connection time out error.
Right now architecture of system having different analytics server and sharepoint server is also different. .
Let us know the better solution due to which i can able to schedule my reports.

could be either a security/authentication or a network issue
can you ping the SSAS server from your sharepoint server?
which user do you use for the data refresh?
Gerhard Brueckl
blogging @ http://blog.gbrueckl.at
working @ http://www.pmOne.com

Similar Messages

Microsoft BI Semantic Model for Power View is missing in data source

Microsoft BI Semantic Model for Power View is missing in data source type drop down when cretaing a rsds data source for powerview in sharepoint 2013

Hi Sanjay,
I resolved the issue.Follow the steps
1)Go to Central Admin->System Settings->Manage Farm Solutions (Under Farm Management)
2)Check if "powerpivotwebapplicationsolution.wsp" is there and is deployed for the webapplication under which you are creating report by verifying
Deployed to:,if not then deploy that for your web application.
Please Mark it as answer if this reply helps you in resolving the issue,It will help other users facing similar problem

External Data Source For BAM Report

Hi all,
I have created one table in Sql Server 2008.I want BAM report for that table.so while creating BAM report I was creating External Data source but I really don't know the driver details.so please help me out.
Thanks in advance
Edited by: 923309 on Oct 26, 2012 7:19 AM

Hello,
Please use the below connection details not exactly.Provide matched details to u db.
Driver Name : com.microsoft.sqlserver.jdbc.SQLServerDriver
Connection String : jdbc:sqlserver://localhost:1433;DatabaseName=SQLDB
Best Regards
Siva Sankar

Linking delivery schedule in a PO for a material into GRN posting date

I have maintained a delivery schedule in a PO for a material
Say PO qty 100
Del Schedule
10.04.09 - 60
20.04.09 - 40
While GRN, for 60 qty, if posting date is greater than 10.04.09, system needs to throw error.
I want to do it for selected materials only.
If OMCQ to be updated, then which msg No. has to be set.
Is there a way to do this.

Dear Kumar,
As per my understanding about your thread
You created PO from XX country to YY country
You will recieve the delivery fromm YY to XX so the delivery date and comitted date will be based on the YY calendar not based on the XX calendar so you make the changes accordingly (Saturdat and sunday are holiday) in YY calendar.
Now try
I hope this will help you,
Regards,
Murali.

CANNOT ACCESS DOWNLOAD FOR READER EVEN WITH CHANGED PASSWORD

CANNOT ACCESS DOWNLOAD FOR ADOBE READER EVEN WITH A CHANGED PASSWORD AND I HAVE BEEN ON CHAT

There are several possibilities as to why a user account may
not be correctly available or a password to it reset to fix it.
One of them may be, if the short name of the computer or of
an account was changed by the user; and later the system
may appear different or changed, with some of the user acct
settings or preferences no longer as they were prior to that.
There is a way to create a new admin level user account and
then move the older user info into the new account; then go
in and delete the other one. I am not certain as to how to do
this; but the topic has come up in these discussions, and the
general path is about the same from Panther through Leopard.
A few details may be named different, but similar as things go.
• Mac OS X: *How to change user short name* or home directory name:
http://support.apple.com/kb/ht1428
• How do I change owner's name in my Mac:
http://www.askdavetaylor.com/howto_change_owners_name_applemac.html
While these kinds of details may not be behind the exact problem in
the computer in question, directory and user account issues do often
have similar causes. Often, they are user-caused events. If the general
Directory of information on the hard disk drive has a problem, the use
of a third-party disk tool such as Disk Warrior is usually advised. If that
were needed, usually more evidence across the system would appear.
There may be a way to use a Setup Assistant to recreate a new user
experience and start over with a new admin account and user name.
Then go into the system to ferret out the old user info.
+Sorry I can't be of more help; as I am being distracted by an elderly+
+person who can't figure out why I am online or what it means to be.+
Good luck & happy computing!

Looking for example workbooks with vba on BEx

Hi,
does anybody have example workbooks including VBA programming for the BEx in excel.
i am using BW 3.5
- such as setting filter values / setting result area for pivot tables
- example of the use of the excel functions that are available in custom functions.
thanks,
Jack

Hi,
Please check this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0a89464-f697-2910-2ba6-9877e3088954
Hope this helps.
Regards,
Mona

I have internet service on iMac but cannot get connection for Blu ray with airport express.

Why am I not getting internet connection for blu ray on tv with airport express?

Which exact model of the AirPort Express do you have?
Did the Blu Ray player connect wirelessly to the Express before or has it never been able to connect to it at all?

Cannot get prompt for Lync webapp with IE

When users join Lync conferences using a Meet Now link, the link is opened in IE, but IE automatically tries to join the meeting as the current user through the Lync desktop client. Since some external companies are not federated or do not allow open federation,
users are unable to join the meeting through this method- the only way is for them to join anonymously as a guest through the Lync WebApp, but even with InPrivate browsing, IE defaults to open the meeting with the desktop client without any prompt. Fortunately
Chrome's superior incognito mode is truly private and lets users choose whether to use the webapp or desktop client. Is there anyway for IE to let you choose every time whether the meeting is opened with the desktop client or webapp, or would settings have
to be reset in the user's IE?

Hi,
Agree with Anthony.
you can copy and paste the URL from your meeting invite into a web browser and add ?sl=1 to the end of the string. This will force the use of Lnc webapp even if lync is installed on that machine.
More details:
http://blogs.technet.com/b/messaging_with_communications/archive/2012/06/05/forcing-use-of-lync-web-app-to-join-a-conference.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Fix for Mavericks compatibility with Lacie external drives yet?

My last attempt to upgrade to Mavericks caused my 2 Lacie external drives to become unrecognisable to my mac. Update hung up too so I lost everything...luckily I had a third back up with CCC that saved me. Im just wondering if there is a fix for this now. I got no information or help from Lacie.

Exactly the same here. Installed Mavericks and La Cie no longer shows in Finder and Time Machine reminds me that no back up has taken place. As an iMac newbie where do I go from here. In my Win PC days I always backed up to an external HD on a scheduled basis without this sort of problem.

Using one azure table storage account for many customers with their own data

I'm developing app that will allow the customers to store their data in azure. However, currently I have no idea how to split accounts of the customers in azure. Yes, I'm just started to read the documentation, but maybe someone can point me to the
right topic?

It seems like it might be worth starting from the general guidance to developing multitenant cloud applications - this resource might help: http://msdn.microsoft.com/en-us/library/ff966499.aspx
The patterns covered in this guidance might apply to data storage mechanism chosen for the application - whether it's Azure Storage , Azure SQL DB or else.

Is a database table required for temporary interfaces with flat file data set source ?

Folks, this is the situation I have in ODI 11.1.1.7
I have a temporary interface (yellow), called MJ_TEMP_INT, that pulls data from TWO data sets in the source into a temporary target (TEMP_TARG). The catch is one data set pulls from a from a table whereas the other data set pulls from a flat file. A union is done on the data sets.
I then create another interface, called MJ_INT, that uses the MJ_TEMP_INT as a source and the target is a real db. table called "REAL_TARGET"
Two questions:
When I execute my second interface (MJ_INT), I get a message "ORA-00942: table or view does not exist" because it is looking for a real db table TEMP_TARG. Why must I have one ? because I am pulling from a flat file ?
On my second interface (MJ_INT) when I look at the property sheet of my source interface MJ_TEMP_INT (yellow), the checkbox next to "Use temporary interface as Derived table" is DISABLED. Why ? Is is also because my temporary interface is pulling from a flat file ?
I have attached a file that shows a screen shot of my ODI studio.
By the way, IF my temporary interface source has only one data set pulling from a db. table into a temporary target table, say called MJ_TEMP2_TARG, and then when I use this temporary interface as a source to another other real db. target table (REAL2_TARGET), THEN, every thing works. ODI does not require me to have a real db. table MJ_TEMP2_TARG and the checkbox for "Use temporary interface as Derived table" is NOT DISABLED and my REAL2_TARGET table gets populated.
Thank you in advance.
M. Jamal.

Thanks SH. I thought so.
Though I understand the reason to materialize the file in a staging area, but that almost defeats the purpose of having a temporary interface in this case if we have to save the data in a permanent db. table first. I assume the db. table sticks around and is not automatically dropped once the interface executing ends. If the db. table sticks around then I also must truncate it first before executing the temporary interface each time. Right ?

Gui_upload for csv file with numeric n date fields

Hi ,
i searched on net on how to use GUI_UPLOAD for csv files using split function but the spilt function requires that the data type of all fields of the internal table should be character whereas in my case there is a numeric n data field too.So kindly help me how to do it.
One way ppl might suggest that give all the fields as char in the internal n after recieving the data in the internal convert the required fields back to data n numeric n then finally insert to the database but if i have 80 fields u would really dont want to do that as it requires precision to convert it to the same type n length as in the original database for all the fields.

yeah i guess that would be a bit longer if i m having more no of fields (80) compared to ORACLE where this can be done in a shorter way.
SO i shall use 2 internal tables here rite?? i mean first one(with all fields as char) for storing the split function values and the other one (with actual data types) .CAN u plz tell me how to convert or cast from one data type to another n while moving values from 1st internal table to another which way shall i do.
Thanks for ur help n can u suggest if there is any other method for uploading csv also other than this split method n whether this method is better n faster than others.
THANX

SharePoint 2013 - Cannot connect or Register WorkFlow Manager with error "The data or messaging layer is unavailable. Please retry after 300 seconds"

Hi
I have SharePoint 2013 farm and installed Workflow Manager 1.0 and configured it and have been runing fine for several months. I upgraded this farm to SP 1 and then started having some issue with publish WF 2013 with task in SPD.
I re-Registered using Register-SPWorkflowService command and that fixed the problem and WorkFlow Manager running again OK. It has been couple of monthle and now I am having the problem again but with a different error on SPD
So doing what I did before, I tried to re-Registered WFM but this time getting the error below
Register-SPWorkflowService : The data or messaging layer is unavailable. Please retry
after 300 seconds.
The only possible resolution that I found is to add the -AllowOAuthHttp in my Register-SPWorkflowService cmdlet but that didnot not resolve the problem. I tried that anyway eventhough we do not allow http.
I did some checking for status and configuration and Get-SBFarmstatus showing all WFM services are running OK
I browsed to the WFM server https://servername:12290 and get the same error
- <Errorxmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>UnexpectedError</Code>
<Message>The data or messaging layer is unavailable. Please retry after 300
seconds.</Message>
</Error>
If anyone have advise / suggestion to resolve this issue, please share
Thanks in advance for all comments
Swanl

Hi Swanl,
Please refer to the article below for troubleshooting actions for workflow manager:
http://blogs.msdn.com/b/vincent_runge/archive/2014/01/07/troubleshooting-actions-for-sharepoint-2013-workflows.aspx
Moreover, activate workflow manager logs and see if there is any error message that could be help.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Can DTD schema for a XML file be a data source to the Crystal Reports?

Hi All,
We are trying to generate a crystal report having XML file as a source. And we want to use the DTD schema for the source XML file.
Please suggest whether DTD schema can be used for crystal reports or not.
Thanks
Sriram

Hi Sriram,
I think it should work.
1) Use this pdf for your reference
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90faaea7-8e1e-2b10-e6a7-ea82e11d9e8b ]
2)if in case it does not help you can convert existing DTD to XSD using this online converter
[http://www.hitsw.com/xml_utilites/]
and then use for generating report from XML file.
Regards,
Jeetsinh Parmar.

I've been paying an average of 140-150 monthly for 2 lines with 3 gb data. I'm debating if I should start to explore a change of providers because other providers have better offerings. I can't trust the agents, asking the community for guidance and the

Looking for guidance.. the title says it all!! Been over paying for the past 5+ years with Verizon.

Based on your current bill, you are paying $50 for data plan, $25 per line and $20 + for a phone installment. Or youre in a high tax state and have 2 year contracts.
If your contracts or Edge payments are almost complete. It's a good time to evaluate. carriers don't prorate, so port numbers 2-3 days before your bill end date.
Best reception.
1.    Verizon
2.    AT&T
3.   T-Mobile, limited to major urban and suburban areas
4.   Sprint, very limited coverage, major urban areas.
prices
Verizon and AT&T are tied for prices and plans
T-Mobile offers some plans slightly lower in price. Their latest offer is a truly unlimited data plan, at a price. It's not cheap, but it's real.
Sprint is slightly cheaper. Not really half of other carriers. You get what you pay for.
phones.
unless you bought an iPhone 6 or Nexus 6 your phone will not work on another major carrier. there are prepaid carriers that use Verizon network.   So you will have to buy a new phone.
most carriers offer a perk for porting your numbers. If the carrier offers to pay ETFs, you have to payoff your account and provide the proof, and turn in your current phone to get credit.
Anything else?

A schedule cannot be enabled for a workbook with no external data sources'

Similar Messages

Maybe you are looking for