A script that can be used to track text content changes in indesign?
Is there a possibility a script that can be used to track text content changes in indesign. My Indesign software's version is CS3. As you can see below, I have deleted some texts and added some. I did it in another software.
I have been searched for a long time. Because of my poor English, I still can't come up with any Object Model related to the script yet.
Here is some idea of mine:
Use the script tracking my revising texts. When I add some new texts, the texts will be underlined. When I delete some texts, the position of the first character of the removed text will be added a small red triangle or something.
Thanks in advance.
Hidden dragon, what does that mean?
I can't comprehend fully what you said.
Is IDML short for Indeisgn Markup Language?
I think you are telling me that I can open the Indeisgn document by using the software InCopy. Then I have change some contents. InCopy will help me tracking the revision.
getZinger. Do I get your point?
Similar Messages
-
Script that can choose to play different tracks????
I'm clueless on how to do this but here is the question...
How do I write and place a script that will select a certain track when coming from a transition?
In other words, from the main menu (still menu) if you choose a button it jumps to a transition track. The transition then jumps to the track selected from the menu.
If the same transition is to be used for every button, is there a script to do this utillizing only one transition track instead of having to have one for every button on the menu?
JoelMost of this is in the manual.
You have 8 registers/variables to play with, GPRMs, in dvdsp. Dvdsp uses the other 8 for it's coding. You can re-name these 8 GPRMs to what you like eg. Button Value or whatever.
The DVD player holds values, SPRMs, in memory that can be read (& some wrtten too). SPRM8 holds the current highlighted button value. B1 = 1024, B2 =2048, B3 = 3072 etc.
Line 1 moves the current value stored in the players memory for SPRM 8 to the register you choose. I chose GPRM 0 but you could choose whatever you want.
Line 2 divides the value now stored in the register (GPRM 0) by 1024. This will give you easier values for you to play with. 1, 2, 3 etc as oppse to 1024, 2048, 3072 etc.
Now the following lines just mean Jump to the track if the value stored in the register equals whatever. If this condition is not met then the next line is read. The last line has no 'if' so the script has an out,
-Jake -
I want to know how to create a new script that can be run in batch proces in Photoshop Element 11 ?
I want to know how to create a new script that can be run in batch proces in Photoshop Element 11 ?
Have a look at the menu file/process multiple files. You can choose to add your signature (or the caption) to the image and export the new files.
If that solution is not flexible enough, consider using the very affordable (12$) Elements+ add-on which offers a 'meta stamp' script :
http://elementsplus.net/v5/en/meta-stamp.htm
Otherwise, have a look at other free and good solutions like Faststone Photoresizer, Xnview... -
Request - Perl script that can parse an ACE config from a VIP
Has anyone ever written a Perl script that can take the VIP from an ACE config and parse it out into the component parts of the config, ACLs, NATs, Class-map, policy-map, etc. ?
This seems like something someone must have written already.
Thanks in advance!Any reason you dont want to use XML instead of doing just PERL ? Its lot easier to do with XML scripts as ACE has a XML interface to query whatever is needed. So that said, you can use a perl to interface ACE via XML. Here's a simple Perl that uses LibCurl:
#!/usr/bin/perl
use WWW::Curl::Easy;
my $numArgs = $#ARGV + 1;
if ($numArgs<4)
die("Usage: shusers.pl ip_address username password command\n");
my $ip = @ARGV[0];
my $uname = @ARGV[1];
my $pwd = @ARGV[2];
my $cmd = @ARGV[3];
my $curl = new WWW::Curl::Easy;
my $posturl = "http://$ip/bin/xml_agent/";
my $xml_cmd = "xml_cmd=<$cmd/>";
$curl->setopt(CURLOPT_HEADER, 0);
$curl->setopt(CURLOPT_FRESH_CONNECT, 1);
$curl->setopt(CURLOPT_URL, $posturl);
$curl->setopt(CURLOPT_RETURNTRANSFER,1);
$curl->setopt(CURLOPT_USERPWD,"$uname:$pwd");
$curl->setopt(CURLOPT_POST,1);
$curl->setopt(CURLOPT_POSTFIELDS, $xml_cmd);
$curl->perform;
my $info = $curl->getinfo(CURLINFO_RESPONSE_CODE);
print $info;
Hope this helps.
Cheers
V.K -
Battery power alone can be used to track Android phones
Now our phones can be tracked without GPS can you believe it ?
BBC News - Battery power alone can be used to track Android phonesI'm trying to do the same thing, and have had limited success with an app called Control Plane. Please understand that I am pretty computer illiterate so this may not be the best way, or even a good way to accomplish this. http://www.controlplaneapp.com/
It allows you to automatically toggle bluetooth(and many other aspects) on or off under certain contexts. I tried setting it up to detect the display connection but sometimes it would detect the display, and sometimes it wouldn't. So I set it up to detect the specific power adapter for the display. So when I plug the monitor power adapter in it switches to the context i labeled "monitor" and I set an action to toggle bluetooth on under this context, when I unplug the power adapter it switches to a context I've named "battery" and turns the bluetooth off.
Automatically turning the bluetooth on is specific to only connecting the monitor power adapter, when other power adapters are connected it does not turn bluetooth on. But it is limited in the fact that if I have bluetooth on in instances other than the monitor connection, and then disconnect any power adapter, it will automatically turn the bluetooth off.
Also if my computer is in clamshell mode, and therefore asleep, when I plug the monitor+power adapter in it doesn't automatically turn on bluetooth, and I cannot use my bluetooth keyboard or trackpad to wake the computer. This forces me to open the computer momentarily to allow it to wake up and control panel to turn on bluetooth for me.
Since my main issue was that I didn't want bluetooth on constantly to save battery life, this works for me, but it is not ideal. Ideally connecting the monitor to the computer in clamshell mode would wake it from sleep, but as of now I can't figure out how to make it do that. If you have any suggestions on how to make this process more efficient please let me know. Hope this helped. -
System Image Restore Fails "No disk that can be used for recovering the system disk can be found"
Greetings
- Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used diskpart clean to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails. It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385 write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385 write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524 Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.------- -
Is there a limit to no. of summary fields that can be used in a cross tab?
Hi,
While creating a cross tab is there a limitation to number of summarized fields that can be used?
- The cross tab when uses 184 fields as summary fields leads to Crystal report application to crash at the time of export to excel.
- Tried with two Datasources: XML and excel
- If we reduce the number of summary fields used to 102 exactly, export works fine in excel.
- If 2 cross tabs are used each containing 92 summary fields(in order to show 184) export to excel works fine.
Please let me know if there is any such limitation which leads to CR application to crash when exporting in excel?
Thanks
Regards,
NidhiI suggest you purchase a case and have a dedicated support engineer work with you directly:
http://www.sdn.sap.com/irj/boc/gettingstarted
Or
http://store.businessobjects.com/store/bobjects/Content/pbPage.CSC_map_countyselector/pgm.67024400?resid=jFmmLgoBAlcAAALO-iYAAAAP&rests=1278687224728
If this is a bug you'll get a refund, if not post your enhancement request in the Idea Place. Or the Rep will suggest a better way to create your report. -
When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified. Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?
The only limit is that of the device. No restrictions on how much of it you can use for music. Is part of your music library unchecked?
tt2 -
What format i should use for my external hard drive that can be used interchangeably between mac and pc?
Usually Fat32/MS-DOS as mentioned, but that has several limitatiuns, like 4GB filesize limit.
One option is MacDrive for you PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/
More options...
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930 -
Is there any way to an index that can be used to include the "OR condition "?
Hello I have some questions.
The test was conducted in the following procedure .
create table test
c1 varchar2(10),
c2 varchar2(10),
primary key(c1)
create index test_idx1 on test(c2);
Command> explain select * from test where c1 = 'AAAAAAAAAA' or c2 = 'AAAAAAAAAA';
Query Optimizer Plan:
STEP: 1
LEVEL: 1
OPERATION: RowLkRangeScan
TBLNAME: TEST
IXNAME: TEST
INDEXED CONDITION: <NULL>
NOT INDEXED: TEST.C2 = 'AAAAAAAAAA' OR TEST.C1 = 'AAAAAAAAAA'
Command>
Command> explain select * from test where c1 = 'AAAAAAAAAA' and c2 = 'AAAAAAAAAA'
Query Optimizer Plan:
STEP: 1
LEVEL: 1
OPERATION: RowLkRangeScan
TBLNAME: TEST
IXNAME: TEST
INDEXED CONDITION: TEST.C1 = 'AAAAAAAAAA'
NOT INDEXED: TEST.C2 = 'AAAAAAAAAA'
Command>
By including the "OR condition " in this test does not use the index.
Is there any way to an index that can be used to include the "OR condition "?
Thanks.
GooGyum.A database cannot in general use indexes in this way for an 'or' involving two different columns. However, for this specific example one can easily rewrite the query using 'UNION' to use the relevant indexes while still giving the same (correct) result:
Command> explain select * from test t1 where t1.c1 = 'AAAAAAAAAA' union select * from test t2 where t2.c2 = 'AAAAAAAAAA';
Query Optimizer Plan:
STEP: 1
LEVEL: 1
OPERATION: RowLkRangeScan
TBLNAME: TEST
IXNAME: TEST
INDEXED CONDITION: T1.C1 = 'AAAAAAAAAA'
NOT INDEXED: <NULL>
STEP: 2
LEVEL: 2
OPERATION: RowLkRangeScan
TBLNAME: TEST
IXNAME: TEST_IDX2
INDEXED CONDITION: T2.C2 = 'AAAAAAAAAA'
NOT INDEXED: <NULL>
STEP: 3
LEVEL: 1
OPERATION: OrderBy
TBLNAME: <NULL>
IXNAME: <NULL>
INDEXED CONDITION: <NULL>
NOT INDEXED: <NULL>
STEP: 4
LEVEL: 2
OPERATION: UnionMergeSort
TBLNAME: <NULL>
IXNAME: <NULL>
INDEXED CONDITION: <NULL>
NOT INDEXED: <NULL>
Maybe you can apply a similar trick? If you know there is no possibility of duplicate rows then you can further optimise this (in terms of performance) by using UNION ALL.
Chris -
Can i use a track pad and mouse at the same time
can i use a track pad and a mouse at the same time
If you mean can you have them both connected at the same time, then it's a yes. I have both connected and use the mouse for some functions and the trackpad for others... works a charm.
-
Is there a list of Unicode characters that can be used in Acrobat bookmarks?
I can add Greek characters to Acrobat bookmarks using hexadecimal strings. For example, to print a lower case gamma symbol I use <FEFF03B3>. FEFF is the required Unicode flag and 03B3 is the Unicode code for gamma. This works fine. However, there are no Unicode entries for greek characters in the PDF 32000-1:2008 PDF Specification manual. Table D.2 - PDFDocEncoding Character Set on page 656 lists Unicode characters and these also work when added to bookmarks but no Greek codes are in this table. Since I can sucessfully use Greek Unicode characters in the range of 0x0391 - 0x03CE and these characters are not listed in the PDF manual I am assuming there are additional Unicode character that will work in bookmarks. Therefore, I am looking for a complete list of Unicode characters that can be used in Acrobat's bookmarks. Does such a list exist?
Thank you for the response.
I'm sorry to hear there is no list available. I'm building the Acrobat bookmarks automatically. The input data contains entity codings (for example, a lower case Greek gamma is coded as γ) and I was hoping to be able to just pass these through with an automatic conversion to a hexadecimal string (for example <FEFF03B3>). If I had a list of valid Unicode characters, that will display in an Acrobat bookmark, I could validate each entity before the conversion and catch the ones that won't display correctly. I know these types of characters are out there because I have already come across them. For example, a superscript 5 (0x2075) displays fine in MSWord but shows as a white box in a bookmark. Now I'll need to proof the output PDFs and look for white boxes in the bookmarks so that I can build my list of unicode characters that do not work in Acrobat bookmarks.
Again, thanks for your help. -
Need to know of a method / process that can be used to send the same msg to all those appearing in my email listings with the same extension after the "@" sign in their address(es) on my macbook [Snow Leopard].
If you simply want to send the exact same message to everyone in your address book with emails ending in "@whatever.com", you can do the following:
Create an email with subject, message and attachments but no addresses
Open Address Book, All Contacts
Search in Address Book for @whatever.com
Select the results and drag them into the To: or Bcc: field of the email. If Bcc: then put your email address in the To: field.
Send the email
This will not personalize the emails (such as with "Dear firstname:" at the top of the message) but it will let you send an idential message to everyone who meets your criteria. -
The log file which can be used to track the HTML preview of HFR Reports
Hi,
Could you please let me know the log file which can be used to track the HTML preview of HFR Reports?
Thanks,
AparnaYou could check the FinancialReporting0.log and FRLogging.log .You could refer the same in the
" http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_troubleshooting_11121.pdf" page 47. -
Has anyone tried to trade in the their iphone5 for the gift card that can be used to buy iphone6?
Has anyone tried to trade in the their iphone5 for the gift card that can be used to buy iphone6?
csa3, I want to make sure you are able to take advantage of this offer. Have you submitted a Preorder for the iPhone 6? If so, you can submit your appraisal before September 30, 2014 using the following link: http://bit.ly/GGnDDC
AndreaS_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
? move photoshop elements 12 from a vista pc to a win 8.1 pc
how to move photoshop elements 12 from a 32 bit vista pc to a new 64 bit win 8.1 pc ?
-
Hi Gurus Would anybody please tell me what is the meaning of mapping in BW? when actually it takes place ? Appreciate your help. Kris
-
I need to learn how to upload a .pl to the cgi-bin in ASCII format. Is there a way to get Dreamweaver8 to do this automatically? Thanks chartoonz
-
Formatting a Hard Drive for RAID 5
Hey everyone, I'm a bit new to RAID formatting. I understand how it works, but I want to make sure I'm formatting correctly. We are looking to format a 12TB drive for RAID 5 for optimal space, speed and safety. In Disk Utility, I am selecting 5 parti
-
Why does firefox keep going back my a previous page after i want to go elsewhere?
when I am in google looking for images and i go to change my search criteria, firefox goes back to the previous page i was on right after i hit my arrow to go. then i have to do this time and time again. and it's getting frustrating!