A "security issue" for property list in library of flash document

Please take a look at this screen-shot I have taken from the library in a flash document.
see in the link below, you have to copy and paste it in your browser.
http://askervgs.wikispaces.com/file/view/library.jpg/505738374/library.jpg
As you see the modified dates for all these components are 28 April-2014 and for last component it is 29 April-2014.
What is strange is that the flash document itself is claimed to be created in a local exam: date on 30.April 2014 !!
How is it possible the components in the library are modified two days before the document itself is created?
Dose it mean that the student has had access to these components two days before the actual exam date????
*** All other students flash documents look normal and all dates for anything they have created  i
their flash document library are actual exam date: i.e. 30.April 2014 between 08.00 - 14:00. 
Please help to clarify this issue?
Thanks for any help!

Thank you for your answer!
They use school laptops, and I will later check the date/time on this person's computer, but something which contradicts the "wrong date" case is that I have received three more files(one open office writer text file) from the same student, all created and modified on 30. April 2014, which was the actual exam date.
So until know it seems that this student has had access to the exam file and prepared the main fla file 2 days prior to the exam date.
This is quite possible because we use previously given  samples in local exams, (digitally available for "some nerds").
But technical question is:
Do the dates listed in flash-library for created components actual dates which match users computer dates/times?

Similar Messages

  • Security issues for Discoverer 10g apps 12i

    gurus,
    I have couple of things to get it done at client.
    We are on Oracle Apps rel 12i with dicoverer 10g.
    Did anyone setup MOAC to be enabled and operational in business areas?
    Setting up secure responsibilities in discoverer for MOAC?
    Any setup needs to be done for custom report security in discoverer ?
    thx

    Hi,
    I did setup new MOAC security profiles and assigned multiple organizations to that profile for testing purpose.
    After this, I did run concurrent program "Security List Maintennce" etc...
    Tested Upding profile at user level or responsibility level.
    On APPS side fine.
    I need the some basic steps on setup of security issues for discoverer side.
    1) Business areas (any security steps need to be followed in order to access data for single or multi-org)
    2) Custom Reports ( any security setup or any moac security profile setting against responsibilty for accessing single or multi-org data)
    Since we dont have default operating unit parameter as specified in the concurrent program, how do you restrict data?
    3) Reconciling security approach r12 with discoverer (any steps need to be followed here after r12 configuration with security issues)
    4) Custom Views ( any steps to be followed for single or multi-org data as security aspect)
    Looking for info on these setups.
    Thx

  • Security issues for mail relay.

    When setting up a mail relay.
    Are there any special considerations regarding passwords for the administrator?
    Are there any services that need to be specifically turned off?
    Any other issues?
    TIA
    Hans

    Hi,
    I did setup new MOAC security profiles and assigned multiple organizations to that profile for testing purpose.
    After this, I did run concurrent program "Security List Maintennce" etc...
    Tested Upding profile at user level or responsibility level.
    On APPS side fine.
    I need the some basic steps on setup of security issues for discoverer side.
    1) Business areas (any security steps need to be followed in order to access data for single or multi-org)
    2) Custom Reports ( any security setup or any moac security profile setting against responsibilty for accessing single or multi-org data)
    Since we dont have default operating unit parameter as specified in the concurrent program, how do you restrict data?
    3) Reconciling security approach r12 with discoverer (any steps need to be followed here after r12 configuration with security issues)
    4) Custom Views ( any steps to be followed for single or multi-org data as security aspect)
    Looking for info on these setups.
    Thx

  • About "kernel.exec-shield" and "because they will bring security issue" for linux ASE

    In " ASE Quick Installation Guide for Linux", "kernel.exec-shield=0" and  “kernel.randomaize-va-space=0” should be set.
    But SuSE engineers say that  “kernel.exec-shield=0”and “kernel.randomaize-va-space=0” will bring the OS security issue.
    Customer want to know why ASE need the above parameters ?
    Has anybody the idea for customer's question?

    If the parameters are not set as documented, attempts to start additional engines beyond the first one will fail, generating stack traces.
    ASE acts in many ways like it's own operating system, scheduling individual user connections (spids) to actively run (note that ASE was developed well before native threading was commonly available).  Each spid has it's own stack information that gets swapped in when it is set to "running" state on the engine and swapped out when it yields the engine.  The mechanics of this is not that different from the buffer overrun exploits described in the Red Hat document linked to by the
    install guide, http://www.redhat.com/f/pdf/rhel/WHP0006US_Execshield.pdf
    and the exec-shield mechanics definatately interfere ASE's operations when ASE is using multiple dataserver processes (engines) that swap spids around.
    -bret

  • Viewing issues for custom list exported from Excel

    Exported a table from Excel to use in our Sharepoint Online site.  I am a site owner.  The table/list shows up for all owners.  When a team site member tries to view the list it only shows the headers and no items.  The list is inheriting
    the permissions from the site and the members can see other content on the site.  I have even stopped the inheritance and set custom permissions for the list but it still only shows for owners.  Any ideas?  Thanks in advance for the help.

    Petra,
    The Forum isn't really designed as a training system but rather where people can share questions or get a separate pair of eyes to look afresh at issues that aren't working for some reason. This is particularly the case for something which is as important as creating dimensions.
    The idea of the SSM Cube Builder/Model Designer was to enable people to build models with their relevant dimensions and metrics for demos and simple initial systems using manual data entry. If you are getting into building dimensions that will be outside BW then you are moving into the implementation arena rather than demo creation and need to work carefully so that things tie up.
    I doubt people would expect to be able to set up/implement BW without training and SSM is the same.
    If you would like training or would like to collaborate on a first project to enable skills transfer then my colleague Pedro and I would be happy to discuss this. We have done this with other people and it has worked well.
    Regards
    Colin

  • Security issues for Flash cookies, Local Shared Objects, .sol files

    Good day, all
    I just found out a bit about flash cookies from Wikipedia and http://epic.org/privacy/cookies/flash.html
    I was wondering if there was a security issue with these (as opposed to privacy issues)?
    It seems easy enough to prevent them being stored or delete them after they are set.
    Thanks,
    Hugh

    Hello Patricia,
    You wrote,
    I came to this forum to see if I could find out how to delete adobe's flash cookies
    You have to do it online via this website.
    Macromedia's Website Storage Settings panel
    Note: As the site says, the dialogue box is not an image, "it is the actual settings manager"
    I just tried it out and deleted the flash content from How Stuff Works, then revisited the site (How Stuff Works) and it didn't add it back, so it seems to work as stated.
    regards roam

  • Where can I submit a potential security issues for OSX10.8.4?

    This morning I found a potential security bug that allowed me to access files, applications and settings for my MBP before the OS had time to confirm my login credentials. I'm sure there are people looking to exploit this so I want to know if there is a place that I can submit the issue online or via telephone.

    http://www.apple.com/feedback/macbookpro.html

  • Security issues for Java server side code

    When reading the Oracle 8i documentation regarding using JDBC
    with Java running within the database, I found that the Oracle-
    specific call 'defaultConnection()' can be used instead of the
    standard 'getConnection()'.
    This appears to be what I want to use as it avoids Net8.
    However, in the documentation it states that the user ID and
    password are ignored. Is there no way, then, of implementing
    user based security in a Java program using defaultConnection()?
    Thanks,
    null

    Hi Kiran
              See u know how to call serverside java objects from remoteobject?  If u know that every thing same that replace coldfusion and place ur java stuff
              but nothing will change at client side cairngorm architecture.. use blaze ds server to connect with the server and make a remote call to the server and have fun.
             i think u know how to initialize services in cairngorm framework and make some struff on delegate and call serverside java methods from remote object service.
              u can try this dont try for examples in the net or something.. u have a complete knowledge on cairngorm framework .. and just u want to develop j2ee applications ..
              make try with sample applications with j2ee server.. its very easy and little interesting.. make some pojos in serverside to communicate with the database and call that methods..
                i think this will help u and i dont have perfect example for serverside java code...
                   this is not and example in cairngorm and java .. but u know cairngorm  and i am posting here only the tutorial how to communicate with java methods
             read this article    http://www.adobe.com/devnet/flex/articles/file_upload.html

  • MII Workbench and java security Issue for jdk7

    Hello all,
    I am using MII version 12.2.2 Build(234) and java version jdk7.
    Now,I am not able to open or create a transaction in workbench.
    In java console, an error is shown below:
    AWT-EventQueue-0 [ERROR] - java.lang.ExceptionInInitializerError
         at com.sap.lhcommon.expressioneval.ExpressionLoader.<clinit>(ExpressionLoader.java:282)
         at com.sap.xmii.bls.expressioneval.TransactionFunctions.<clinit>(TransactionFunctions.java:27)
         at com.sap.xmii.xacute.editors.common.FunctionsComboBox.createBox(FunctionsComboBox.java:45)
         at com.sap.xmii.xacute.editors.common.FunctionsComboBox.<init>(FunctionsComboBox.java:39)
         at com.sap.xmii.xacute.editors.transaction.dialogs.linkeditor.LinkEditorPanel.createExpressionEditorPanel(LinkEditorPanel.java:1033)
         at com.sap.xmii.xacute.editors.transaction.dialogs.linkeditor.LinkEditorPanel.initialize(LinkEditorPanel.java:316)
         at com.sap.xmii.xacute.editors.transaction.dialogs.linkeditor.LinkEditorPanel.<init>(LinkEditorPanel.java:198)
         at com.sap.xmii.xacute.editors.transaction.dialogs.linkeditor.LinkEditorBottomPanel.<clinit>(LinkEditorBottomPanel.java:28)
         at com.sap.xmii.Illuminator.gui.workbench.core.TransactionInfo.initDisplay(TransactionInfo.java:353)
         at com.sap.xmii.Illuminator.gui.workbench.core.TransactionInfo.createNewFile(TransactionInfo.java:149)
         at com.sap.xmii.Illuminator.gui.workbench.components.actions.actions.NewAction.createFileInfoObject(NewAction.java:194)
         at com.sap.xmii.Illuminator.gui.workbench.components.actions.actions.NewAction$1.construct(NewAction.java:115)
         at com.sap.lhcommon.gui.ThreadCreator$2.run(ThreadCreator.java:96)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.security.AccessControlException: access denied ("java.lang.RuntimePermission" "accessClassInPackage.sun.security.action")
         at java.security.AccessControlContext.checkPermission(Unknown Source)
         at java.security.AccessController.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkPackageAccess(Unknown Source)
         at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at com.sun.jnlp.JNLPPreverifyClassLoader.loadClass0(Unknown Source)
         at com.sun.jnlp.JNLPPreverifyClassLoader.loadClass(Unknown Source)
         at com.sun.jnlp.JNLPPreverifyClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at com.sap.lhcommon.expressioneval.functions.DecodeFunction.<clinit>(DecodeFunction.java:83)
         ... 14 more
    I also modified the 'java.policy' file. But it did not work. I am still getting the same error.
    Kindly advise..
    Thanks,
    Ritwika.

    I do not yet know the security implications of doing what I did to fix this issue, but here is my solution.
    I added the following to the jre7 java.policy file in the section "grant {":
    permission java.lang.RuntimePermission "accessClassInPackage.sun.security.action";

  • Security Issues for Remote Login to ECC Server

    Hi,
    I have configured the saprouter so that people can remotely access the SAP ECC Servers outside the local area network. The saprouttab file contains the following entry:
    P * * *
    The parameter login/no_automatic_user_sapstar has also been set to a value 1.
    The user DDIC and SAP* can only be accessed using the master password, which is provided at installation time.
    Is my network secure enough? Or do I need to take into account some more steps / measures?
    Regards.

    Hello,
    Generally its not recommended to open up your network in the manner you have mentioned, however if its a requirement you cannot deny here is what first comes to my mind:
    Use the 'S * * *' instead of 'P * * *' (unless you are using ITS/J2EE and letting people access using HTTP(S)) , this will ensure that people are able to access only SAP protocol and not any other protocol
    Use the following link to understand options of saprouter table.
    http://help.sap.com/saphelp_47x200/helpdata/en/4f/992dfe446d11d189700000e8322d00/frameset.htm
    Also,
    It will be a good idea to allow access only to a particular IP Address i.e. the SAP Application Server instead of the entire IP range.
    instead of
    S * * *
    something like:
    S * <sap server ip address> *
    Regards,
    Siddhesh

  • Same issue for a year now with watching Flash content, nothing has changed

    One of my main gripes about Safari, is that while I am watching a flash movie in one safari window and have another safari window open typing, doing work etc., the flash video stutters in the first window (looks like it is evenly dropping frames incrementally) . Sound is fine, no prob there.
    It doesn't matter what flash video it is, from whatever site, it will always do this... and it is very annoying. When using Safari, do I really have to be using one open window, while watching the Falsh content so it is smooth like it was designed to be?
    Now on the other hand i do not have this problem in Firefox. I can have two windows open, one playing flash content and I will have it sized down in the left hand corner of my screen, and have another window open which I am typing in, and have no reduciton in quality...whatsoever.
    I have tried everything possible, I am not a new mac user , and I am familiar with every suggestion one would suggest here as a starting point. Regarding, Permissions, trashing folders, resarting, re-installing combo updates, un-installing flash, re-installing flash; etc, etc.
    Thanks

    Thanks for the the speedy reply. And thank you for all your suggestions about standard plugins and the current plugins now available to the user. I am familiar with them, etc. i have also restarted,
    "repaired premissions" etc. Yes, I am current in OS, Flash, all plugins you speak of, etc. Combo update has been re-applied, flash un-installed, then re-installed...etc, etc..
    I have attemped everything you speak of, and everything I can come up with, but there is no change in my problem.
    Can you do something for me? I want you to go onto the youtube website, pick a video to watch and and with only one safari window open, I want you to leave some room on top of browser window so you can see your desktop. Now move your cursor over your desktop, and click on the desktop - which will activate the finder, and Safari will no longer be the chosen app. Do you see the difference in picture quality in the safari window hosting the flash video?
    Try it again. Click on the Safari window, then back to the desktop. Vice versa. Everyone I know I have showed this too , sees the obvious difference. My mother says, well I can see what you are talking about, but it doesn't bother me...well, my mother is pretty old, so she doesn't count.
    Well, for me The picture quality starts to drop frames evenly through the whole entire video.
    Firefox does not do this.
    Can anybody else try this,
    my system cannot be the casue,
    for I have recently re-installed this OS,
    and the problem still exists. I am very familiar with updates,
    and the like. All the usual suggestions have been applied.
    And, If this is just the way it is in Safari, I can live with that...I mean, i live with the memory leaks that it has, and other quirks about it. But, If this is a unique problem , then ..well, I have a problem

  • AppleScript 10.9.0 System Events -10006  Update property list file item

    Have AppleScript that runs without error on Mountain Lion 10.8.5, but errors out on Mavericks  10.9.0.
    At end of script, property list items need to be updated and this is when error occurs.
    Put together a subset of the script, see below) that get the error
    Statement reads "set value of property list item "ArrayList001" to ArrayList001"
    Text of error:
         error "System Events got an error: 'xxx.plist' is not a property list file."
         number -10006 from contents of property list file "xxx05.plist"
    =============================================================================
    property myPListFile : "cbmck05.plist"
    property myPListFilePath : ""
    property constPreviousRunDay : "PreviousRunDay"
    on run
       set today to "Date01" as string
              set List001 to {}
              set List002 to {}
              set myPListFilePath to ""
              repeat with i from 1 to 8
                        set end of List001 to (i * 2) as string
              end repeat
              set myPListFilePath to path to desktop folder from user domain as string
              set fileMyPList to (myPListFilePath & myPListFile) as string
    clear_file(fileMyPList)
    -- First time! need to initalize
              tell application "System Events"
      -- create an empty property list dictionary item
                        set the parent_dictionary to make new property list item with properties {kind:record}
      -- create new property list file using the empty dictionary list item as contents
                        set new_plistfile to ¬
      make new property list file with properties {contents:parent_dictionary, name:fileMyPList}
      make new property list item at end of property list items of contents of new_plistfile ¬
      with properties {kind:string, name:constPreviousRunDay, value:today}
      make new property list item at end of property list items of contents of new_plistfile ¬
                                  with properties {kind:list, name:"ArrayList001"}
      make new property list item at end of property list items of contents of new_plistfile ¬
                                  with properties {kind:list, name:"ArrayList002"}
              end tell
              set previousRunDate to today
              set xxList to (repopulate_lists())
              set ArrayList001 to List001
              set ArrayList002 to List002
    -- save info in the plist file
              tell application "System Events"
                        tell property list file fileMyPList
                                  tell contents
                                            set value of property list item constPreviousRunDay to previousRunDate
                                            set value of property list item "ArrayList001" to ArrayList001     --   <<< ------- error caused by the statement
                                            set value of property list item "ArrayList002" to ArrayList002
                                  end tell
                        end tell
              end tell
    end run
    -- ==========================================
    on repopulate_lists()
              set newList to {}
              set List002 to {}
              repeat with i from 1 to 8
                        set end of newList to i as string
              end repeat
              set List001 to newList
              return List001
    end repopulate_lists
    -- ==========================================
    -- Does the file exist?
    on fileExists(f)
              try
      f as string as alias
                        return true
              on error errMsg number errNum
                        return false
              end try
    end fileExists
    -- Delete the  files if exist
    on clear_file(aFile)
              if fileExists(aFile) then
                        tell application "Finder"
                                  set resultObject to delete aFile
                        end tell
              end if
    end clear_file

    Here's an AppleScript handler that partially works around this bug (warning: it turns each list item into a string).
    on plistWrite(plistPath, plistItemName, plistItemValue)
      -- version 1.1, Daniel A. Shockley
      -- 1.1 - rough work-around for Mavericks bug where using a list for property list item value wipes out data
              if class of plistItemValue is class of {"a", "b"} and AppleScript version of (system info) as number ≥ 2.3 then
      -- Convert each list item into a string and escape it for the shell command:
      -- This will fail for any data types that AppleScript cannot coerce directly into a string.
                        set plistItemValue_forShell to ""
                        repeat with oneItem in plistItemValue
                                  set plistItemValue_forShell to plistItemValue_forShell & space & quoted form of (oneItem as string)
                        end repeat
                        set shellCommand to "defaults write " & quoted form of POSIX path of plistPath & space & plistItemName & space & "-array" & space & plistItemValue_forShell
      do shell script shellCommand
                        return true
              else -- handle normally, since we aren't dealing with Mavericks list bug:
                        tell application "System Events"
      -- create an empty property list dictionary item
                                  set the parent_dictionary to make new property list item with properties {kind:record}
                                  try
                                            set plistFile to property list file plistPath
                                  on error errMsg number errNum
                                            if errNum is -1728 then
                                                      set plistFile to make new property list file with properties {contents:parent_dictionary, name:plistPath}
                                            else
                                                      error errMsg number errNum
                                            end if
                                  end try
                                  tell plistFile
                                            try
                                                      tell property list item plistItemName
                                                                set value to plistItemValue
                                                      end tell
                                            on error errMsg number errNum
                                                      if errNum is -10006 then
      make new property list item at ¬
                                                                          end of property list items of contents of plistFile ¬
      with properties ¬
                                                                          {kind:class of plistItemValue, name:plistItemName, value:plistItemValue}
                                                      else
                                                                error errMsg number errNum
                                                      end if
                                            end try
                                  end tell
                                  return true
                        end tell
              end if
    end plistWrite

  • Other web browsers and security issues?

    Since even an Apple KB article recognizes the need for an additional browser and because of Safari's limitations and problems, I'm going to try switching to another browser (most likely OmniWeb and am looking at Firefox, Shira and Opera also though perhaps not as a primary browser) but I'm wondering about their ability to keep on top of any security issues for Mac? (and how do you keep up with security updates?)
    Though perhaps unfounded, at least with Safari, I feel that Apple has a vested interest in keeping on top of security issues (for Safari and Java) and I can readily find out about security updates via software updater.

    Most of the other Mac browsers have their adherents. They are all good browsers (I have 7 browsers installed to test various web sites and for change-of-pace usage). They all have their strengths and they all have their weaknesses. Only iCab and OmniWeb are still shareware, the rest are now or always have been free (Opera just recently stopped charging for its browser).
    I have settled on Firefox as my alternate browser and I use it maybe just a tad more than Safari, but I do switch back and forth between them. The Mozilla foundation is good at getting security updates out when needed. Firefox has a button on the toolbar to check for updates. One nice thing about Firefox is that you can install free extensions which enhance the features available. I have one to supplement tab features, one to control iTunes from Firefox's status bar, one to help me format messages in discussion forums, and one to block ads.
    I prefer OmniWeb for doing intensive research because of the way it handles tabs in its sidebar, showing me which ones I've looked at and which ones I haven't, and giving me great flexibility in rearranging tabs, which are viewable as thumbnails or text names (I have had up to a hundred or so tabs open in OmniWeb.
    Shiira is good and its fast. I have not checked for updates for a while, but the last time I updated there was still a problem with Shiira kicking you out of logged-in sites when you moved from page to page with in web site. This may have been fixed by now - they were aware of the problem back then.
    Camino is a native OS X cousin of Firefox and is also fast, but is not updated as often.
    I would stay away from Mozilla or Netscape unless you need all the additional modules they have and which take up hard disk space. Firefox and Camino represent the browser module of Mozilla/Netscape. Mozilla and Netscape have modules for email, irc chat, newsgroups, and for creating and editing web pages. Netscape is a branded and slightly customized version of Mozilla and is not updated as often.
    Opera is a nice browser and some use it as their main browser, but I have not seen anything that really stands out for me, but that does not mean it is not worth a look.
    I would stay away from abandonware Internet Explorer.
    As for checking for updates, several of them, as with many Mac programs, now have a menu item that allows you to check for updates. Most of them also announce their updates on both VersionTracker and MacUpdate.
    Happy Exploring.

  • Clearing Network Identification Property List

    How do I go about clearing the network identification property list?
    /Library/Preferences/SystemConfiguration/com.apple.network.identification.plist
    I have tried deleting it, but it always regenerates with the same data. I want the property list to just show my current network information and not previous connections.
    Thank you.

    What exactly are you trying to clear out? If you are referring to wireless networks that you previously joined then go into System Preferences/Network/AirPort/Advanced/AirPort and delete unwanted network info from the 'Preferred Networks' pane

  • Help with how to setup property list correctly

    I am developing an iPhone application and I need a database to store data.
    Since it's small amount of data I'll go for Property List.
    But I have zero experience with it. I was hoping you could help me set it up.
    It's an app based on karate techniques required for each belt.
    Firstly I need the top category to be the belt. and a subcategory for EACH belt to be Requirements, Stances, Blocks, Hand Techniques, Foot Techniques, Kata and Kumite.
    How do I do that?

    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Rows</key>
    <array>
    <dict>
    <key>Title</key>
    <string>Belt 1</string>
    <key>Children</key>
    <array>
    <dict>
    <key>Title</key>
    <string>B1 Requirements</string>
    </dict>
    <dict>
    <key>Title</key>
    <string>B1 Stances</string>
    </dict>
    <dict>
    <key>Title</key>
    <string>B1 Blocks</string>
    </dict>
    <dict>
    <key>Title</key>
    <string>B1 Hand Techniques</string>
    </dict>
    <dict>
    <key>Title</key>
    <string>B1 Foot Techniques</string>
    </dict>
    <dict>
    <key>Title</key>
    <string>B1 Kata</string>
    </dict>
    <dict>
    <key>Title</key>
    <string>B1 Kumite</string>
    </dict>
    </array>
    </dict>
    <dict>
    <key>Title</key>
    <string>Belt 2</string>
    <key>Children</key>
    <array>
    <dict>
    <key>Title</key>
    <string>B2 Requirements</string>
    </dict>
    <dict>
    <key>Title</key>
    <string>B2 Stances</string>
    </dict>
    <dict>
    <key>Title</key>
    <string>B2 Blocks</string>
    </dict>
    <dict>
    <key>Title</key>
    <string>B2 Hand Techniques</string>
    </dict>
    <dict>
    <key>Title</key>
    <string>B2 Foot Techniques</string>
    </dict>
    <dict>
    <key>Title</key>
    <string>B2 Kata</string>
    </dict>
    <dict>
    <key>Title</key>
    <string>B2 Kumite</string>
    </dict>
    </array>
    </dict>
    </array>
    </dict>
    </plist>
    Use Xcode to copy/paste more belts. Rename belts as needed.
    This is only the plist structure for drilling down and does not include details for each category beyond the items shown.
    You can't be doing any of this if you have zero experience - you'll have questions for every tiny step and unless someone builds your app for you, you'll go ahead very, very slowly.
    It is up to anyone with zero experience to spend time going thru the most basic hello world tutorials, as an example, and learn enough to be able to gain some traction on their own...this is not trivial stuff that you can just install a few tools and make what you want the next day, sorry.
    See this post for beginner resources:
    http://discussions.apple.com/thread.jspa?threadID=2218661
    - come back when you've exhausted those and need specific help untangling something or if you get confused as you progress on your own...not just in over your head at the very beginning.

Maybe you are looking for