A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip nmed 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved th

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip named 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved the project, the actual video content of 0002.MTS to 0005.MTS was missing(source clips are still there but they were playing and working as part of that 0001.MTS timeline clip before). Those parts of the 0001.MTS clip in the timeline were Danger Striped and can be relinked but now have no edits anymore. The edits are apparently only linked with the original 0001.MTS source clip but extend beyond the actual range of the actual source clip. At the time I thought it was weird that premiere displayed the whole string of clips as one (with one name and no breaks) but it all works in the original project file but cannot be transferred to another location without multiple clips showing Danger Stripes.I need to move it and preserve the dozens of motion and opacity edits linked to the apparently oversized timeline clip. HELP!! any ideas?
I did not nest any clips or sequences, premiere just seemed to combine the clips under one name when I moved them to timeline.
I am using CS5.

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip named 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved the project, the actual video content of 0002.MTS to 0005.MTS was missing(source clips are still there but they were playing and working as part of that 0001.MTS timeline clip before). Those parts of the 0001.MTS clip in the timeline were Danger Striped and can be relinked but now have no edits anymore. The edits are apparently only linked with the original 0001.MTS source clip but extend beyond the actual range of the actual source clip. At the time I thought it was weird that premiere displayed the whole string of clips as one (with one name and no breaks) but it all works in the original project file but cannot be transferred to another location without multiple clips showing Danger Stripes.I need to move it and preserve the dozens of motion and opacity edits linked to the apparently oversized timeline clip. HELP!! any ideas?
I did not nest any clips or sequences, premiere just seemed to combine the clips under one name when I moved them to timeline.
I am using CS5.

Similar Messages

  • Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop.

    Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop

    screen look on

  • How to use Dual monitors with G5 Mac;  AND    How can the image in "Develop" be made to look like wh

    Two questions: How can I use my dual monitors on my G5 Mac?
    How can the image in "Develop" be made to look like what it will print, just as it is
    done in Photoshop with view>proof setup.

    Still wondering what tool is available in LR 1.1 to "view proof"
    As in Photoshop CS 3, and previous versions of PS, in view I can
    choose the custom .icc profile of the printer, to view what the final
    print will nearly perfectly appear like.
    What tool is available in LR 1.1 to do the same?
    Equipment: Mac OS 10.4.10; dual monitors; Epson Pro 9600 and SPR
    2400, both dedicated to matte black ink. Color working space is
    ProPhoto RGB. I stay in 16 bit.

  • How to use Dual monitors with G5 Mac;  And...    How can the image in "Develop" be made to look like

    Two questions: How can I use my dual monitors on my G5 Mac?
    How can the image in "Develop" be made to look like what it will print, just as it is
    done in Photoshop with view>proof setup.

    Patience! :)
    (This was asked and answered in previous thread.)

  • Hi, I just downloaded a bunch of RAW files into Lightroom 5.6 and they all look like they've been put through acid. Can someone please help? TYVM!

    Hi, I just downloaded a bunch of RAW files into Lightroom 5.6 and they all look like they've been put through acid. Can someone please help? TYVM!

    Jim and Rob, thank you for taking your time to respond. I have a mac & a pc with 4 gigs of RAM in each. I originally experienced the problem on my mac and afterwards the same thing happened on the pc. I shoot with a canon 5d mark iii and never had this problem before, but what I'm realizing is that I'm running out of space on both the mac & the pc. After an afternoon of shooting today, I filled up a 32-gig card, so my TB hard drives are filling up ridiculously fast. I need to drop some load off both drives and reboot. Hope this will resolve the issue as I really don't think it's a canon-LR problem (I'm using the most updated 5.6 version). Again, thanks for your input. I'll keep you posted.

  • Can I move ninety video files with their keyword tags from 'My Catalogue' into another catalogue?

    Can I move ninety video files with their keyword tags from 'My Catalogue' into a another catalogue?

    Nyinyikay a écrit:
    Can I move ninety video files with their keyword tags from 'My Catalogue' into a another catalogue?
    Two problems :
    1 - You can't merge catalogs in PSE
    2 - The usual workaround is to 'write metadata to files', export the files and 'get' them into the other catalog. But you can't write metadata to files with video files.
    The only thing you could do would be to duplicate the catalog and delete all pictures other than your ninety videos...

  • How do I make multiple movies look like one?

    I created a demo of 136 slides with mostly screencaps and one
    small flash animation. The final published flash file is
    approximately 30MB. When the demo is run on multiple computers, the
    CPU utilization rises up to almost 100%, this makes the demo run
    very slowly on most computers. I was advised to cut my captivate
    movie in half ( in slides)... however even then the CPU utilization
    is quite high. How can I break my demo into multiple linked movies
    (to bring down the file size) but still have it play smoothly
    without it stopping to load after each new movie? How do I make
    multiple movies look like one?
    Thank you.

    Would it work to make the navigation of the page go to the
    next movie?

  • I am having a problem with pop pups and small windows with ads constantly opening up on my safari?? Thought that macs didn't get virus? this looks like one- any experts around? please help me fix it with your instructions? really don't know what to do...

    Hi everyone,
    I am having a problem with my Mac OS X 10.7.5 mac book air , there are constant pop pups and small windows with ads blinking constantly opening up on my safari in front of everything?? it is constantly interupting me and makes me mistakingly click on it then another new windows open behind the one im using..
    I am not too sure if thats a virus or trojan.. I always thought that macs didn't get virus? this looks like one to me… any experts around? please help me fix it with your instructions? really don't know what to do... thanks

    Those are not viruses. You have probably installed some malware:
    The Safe Mac » Adware Removal Guide
    Helpful Links Regarding Malware Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
              Mac OS X Snow Leopard and malware detection
              OS X Lion- Protect your Mac from malware
              OS X Mountain Lion- Protect your Mac from malware
              About file quarantine in OS X
    If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
    From user Joe Bailey comes this equally useful advice:
    The facts are:
    1. There is no anti-malware software that can detect 100% of the malware out there.
    2. There is no anti-malware that can detect anything targeting the Mac because there
         is no Mac malware in the wild, and therefore, no "signatures" to detect.
    3. The very best way to prevent the most attacks is for you as the user to be aware that
         the most successful malware attacks rely on very sophisticated social engineering
         techniques preying on human avarice, ****, and fear.
    4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
        your computer is intended to entice you to install their malware thinking it is a
        protection against malware.
    5. Some of the anti-malware products on the market are worse than the malware
        from which they purport to protect you.
    6. Be cautious where you go on the internet.
    7. Only download anything from sites you know are safe.
    8. Avoid links you receive in email, always be suspicious even if you get something
        you think is from a friend, but you were not expecting.
    9. If there is any question in your mind, then assume it is malware.

  • LPX issues with LR, BFD, and the GUI looks like Garageband now...

    I downloaded LPX a few days ago.  Everything worked fine except BFD Eco, which is what I use almost exclusively for drum samples (primarily demo work at this stage).
    I also bought an iPad Air per rave reviews of the LR app.  Got that setup, and it worked, but as with other users on the forum here, it started to crash on me within moments of turning it on and pairing it with LPX.  So I searched the forums and found someone who was advised to delete the .plist files under ~/Library/Preferences, then restart the machine.  They were also advised to delete any old .plist files from a previous version of Logic, which I also did.
    [Back story:  I bought the AC7 Core app a couple years ago to try and perform transport functions from my iPhone.  This app "tricks" logic into thinking it's a Mackie interface, so I figure that somewhere during the install, Logic got really confused about my using a Mackie controller which is interfering with my use of the iPad LR app.  Other people are having the same issue... seems like a solid bet, right?]
    So I deleted the following files:
    com.apple.logic10.plist
    com.apple.logic.pro.cs
    com.apple.logic.pro.plist
    And now LPX looks like Garageband.  Check it out:
    It has those crappy wood panel bars on the left and right, I don't have access to the mix window, I can only see channel strip plugins by using the inspector... this is weird!  Which file did I delete that could have caused this?  Or am I missing something else?
    Additionally, LPX prompted me to download additional Drummer kits AFTER I went through the whole "download additional content" process, telling it to DL anything I didn't already have.
    This was all a wild goose chase to reduce latency from my iPad Air to LPX.  It can automate faders and sends fine, but playing drum pads and keyboard lines has a noticeable delay (about 50-100ms).  So if anyone is willing to help fix the GUI, it would also be super nice if you could give me some pointers on reducing latency & improving stability with the LR.
    In case anyone's interested, BFD Eco is still not functioning properly.  Bought it in 2011 and apparently I need the 64-bit version.  Purchased from fxpansion and now my machine can't find the install script file to actually upgrade my license.  eesh.
    Nick

    Nick,
    To get out of GarageBand mode, open your preferences, go to the Advanced tab and be sure to tick "Show Advanced Tools."

  • How do i change the display in ADE to a single page view instead of two pages side by side? I find it distracting and prefer to look at one page at a time.

    How do i change the display in ADE to a single page view instead of two pages side by side? I find it distracting and prefer to look at one page at a time.

    You can increase the font size and automatically page view changes. Go to menubar; Reading -> PDF View or Epub Text Size (depending upon the ebook) and increase the size.

  • I go to touch an app or game button on my iPhone and the screen blinks like its trying to open, but nothing happens. Why and what do I do?

    I go to touch an app or game button on my iPhone and the screen blinks like its trying to open, but nothing happens. Why and what do I do to fix it?

    Are there any apps in the muti-tasking bar? If the app closed unexpectedly and appeared in the muti-tasking bar, end it. Double tap the home button and then hold the app until it starts to wiggle then tap the minus at the top left at the app (if you want, end all the remaining apps)  try opening them now. Hope this helps! :)

  • Frustration! I have all igoods in order to use all, fully as should be. But looks like Softbank does no agree with any connection between iPhone and iMac... What in the world! How Apple let that happen???

    I live in Japan,
    I have all igoods in order to use all, fully as should be. But looks like Softbank does no agree with any connection between iPhone and iMac... What in the world! How Apple let that happen??

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    See also:
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *https://support.mozilla.org/kb/Images+or+animations+do+not+show

  • How do I get my Mac Mail signature to be single spaced close together and not what looks like a double space?

    I am using Mac Mail on Mac Air  with 10.10.  I have a multi line signature but it looks double spaced and I can't get it to look like a single spaced signature.  I tried different fonts and sizes.
    Appreciate your assistance.
    Fran

    I Finally resolved my problem after much research. On my I pad 4 with retina in the field under settings there is a list to choose from-- ex. Aol,Google, yahoo, etc. I chose other and entered att. Used pw and bingo! Problem resolved. It is somewhat configured a little different; but at least I can get all of my 500 e mails.
    apple takes IMAP but this is under pop And at least my persistence paid off. You would think something so simple would be informative to us in a better way.

  • I want to move a selection (a person) into an image of a brick wall and have it look like the person was painted on the wall. Can it be done? Using CC on iMac. Thanks

    I want to move a selection (a person) into an image of a brick wall and have it look like the person was painted on the wall. Can it be done? Using CC on iMac. Thanks

    Yes of course its Photoshop. Cut the person out copy to clipboard paste onto toe brick wall document  and texture the layer using a displacement map for the brick wall. Look for Photoshop tutorials on using a displacement map.

  • Is anyone else having the finish rub off of the keys on their macbook? I've had mine for about 6 months and several keys look like the finish is wearing through. I went to the local genius bar today and the techs said they'd never seen this before.

    Is anyone else having the finish rub off of the keys on their macbook? I've had mine for about 6 months and several keys look like the finish is wearing through. I went to the local genius bar today and the techs said they'd never seen this before.

    Some people have seen their aluminum uni-body discoloring due to body oils.  Go figure.
    Normally putting anything over the keys/aluminum will hurt heat disspation, but you may need to use keyboard covers.
    Or save up $500/year for new keyboards.
    Neither is supposed to be a sarcastic answer.  Either one could end up being the solution.
    Good luck with it.

Maybe you are looking for