A setup that works....
To whoever needs it...
I have now successfully run the BI Beans tutorial, including deployment to external OC4J server.
Here is my setup:
Node1 (my PC):os=xp,jdeveloper9.0.2 production, BI Beans production as downloaded today.
Node2 (iAS): Os=w2k,installed Jdeveloper9.0.2 production and BI Beans as downloaded today. Running the OC4J (9.0.2.0.0) as non-embedded as described in install.html.
I am not using any other parts of Jdeveloper on this node
Node3 (DB): os=solaris2.8, Oracle9i (9.0.1.2.1) with patches as described in BI Beans installation instructions.
I am now able to develop,deploy,access in browser!
Thanks for assistance.
Jens
Mike,
Welcome to Apple Support Communites.
Review; MobileMe: Setting up iCal for the new MobileMe Calendar, and post back with further questions.
Similar Messages
-
My iPhone5 prompts while setting up "This iPhone is not currently setup to work with carrier you are attempting to use.Please insert another SIM card from a supported carrier" or "Request that this iPhone be unlocked" How can I unlock my new iPhone5 to function properly?
That means that the phone is locked to a carrier other than the one you are trying to use.
ONLY the carrier it is locked to can authorize unlocking it.
Where exactly did you get this "new" iPhone 5? -
The SIM card inserted in this iPhone does not appear to be supported.
This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked.
what does it mean?Have a look in Settings>Carrier
Again YOU cannot unlock it - only the original carrier can do it -
The SIM card inserted in this iPhone does not appear to be supported.
This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked.Sounds like you are trying to use an iPhone that is locked to a particular
wireless carrier with the sim from another wireless carrier. Contact the wireless
provider that the iPhone is locked to and ask if they offer unlocking and if
you qualify. Only the wireless carrier that the iPhone is locked to can unlock
it. -
hi i updated my iphone but it says that This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked. how can i unlock this one?
Your iPhone was hacked or jailbroken before and through the update it locks back to the original carrier. Only the original carrier can unlock the iPhone. You have to contact them and find out what the procedure you needs to follow.
-
This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked.
In your other post https://discussions.apple.com/thread/5001329?tstart=60
you say the iPhone originally was on contract with Orange UK. You will have
to work with Orange UK to get the iPhone unlocked. -
Lightroom 3 Error Working With Photos That Work With Other Apps
My Setup:
Lightroom 3.3 for Mac
iMac OS X 10.6.6
The problem:
Lightroom is unable to work with photos it used to be able to work with. In the Library Module I get the error message "There was an error working with the photo." In the Develop Module I get the message "The file appears to be unsupported or damaged."
Now I know the photos are ok because I can view them in other apps including Photoshop CS5
And these photos used to work in Lightroom.
I am suspicious it has something to do with Picasa, which I use to catalog faces. I have compared the exif data and the photos that don't work have an extra value called "Image Unique Id" and it appears to be a long hexadecimal number. Also, the software version has been modified to indicate "Picasa".
It bothers me that a world class product like LIghtroom is not robust enough to work on these files when everything else I have tried does work. The problem is LIghtroom is the primary tool in my workflow.
So has anybody seen this and know of a way to fix it?@Pete -
Thanks for the feedback, but my I think my concern is valid. Whatever Picasa is doing to the photo other apps like Apple Preview and CS5 can deal with it. Lightroom cannot. I am not explicitly modifying the files in Picasa just using Picasa to catalogue the faces. So yes, I will quit using Picasa, but I still have hundreds (if not thousands) of photos that can no longer be processed by Lightroom and I need guidance on how to best recover these photos.
I didn't know whether the Image Unique Id is standard or not, but I do know it does not show up in the files that work, only in the files that do not work. I just assumed that it was non-standard because I did not see it on functioning files.
Also, I would argue that Lightroom should be better able to handle this kind of situation instead of just not working. Thanks again. -
i unlocked my iphone 4 factory and i upgrade to 6.1 when i connect it to itunes it apears
The SIM card inserted in this iPhone does not appear to be supported
This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked.It sounds like you or someone else hacked the phone to unlock it. Updating it locked it to the original carrier.
How did you unlock it? The ONLY legitimate way is to ask the carrier it is locked to to unlock it. Any other way requires hacking or jailbreaking the phone. -
I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!
The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network". -
Is there a NAS box that works well with OSX
I've always struggled with NAS boxes & OSX. Sure, I can connect them up, and copy files to and from a mac, but eventually I always seem to run into issues. Suddenly I can no longer access the files, or I can no longer connect at all, or it fails to connect with a specific user, etc. I end up grovelling around support forums, typing sudo this & sudo that and eventually I can access the files again - until the next time. They seeem to be more trouble than they are worth. At least for me. I've had these problems with Leopard, Snow Leopard & now with Lion.
I've got a macbook pro that only I use, plus an iMac that all the family use (including me). What I want to be able to do is to have a NAS box set up with a private share for each member of the family that only they can access, plus a public share that everyone can copy files to and from.
I want to be able to access the public share from both computers at the same time.
Suppose my wife is logged on on the iMac, and she's streaming a movie from the public share using iTunes to the ATV2. I want to be able to fast-user-switch to my account & access the files in the public share, and also my private share.
I want to be able to access files on my private share from both my macbook pro and the iMac. At the same time.
I want family members to be able to access their private shares, and also the public share from their Windows laptops as well as the iMac.
I can't see the problem with doing these things. As long as permissions a managed by the NAS box not the individual pcs & macs it should be easy. But of course it isn't!
Does anyone run this sort of setup, where it works seamlessly? If so, what sort of NAS box are you using?
If not, maybe the way to go would be to get a Mac Mini and set it up with Lion Server as a file server. Would that work better?You're welcome - make sure you follow Epson's instructions when you get it; don't know if they've changed it, but about 2 years ago, I had to connect it via USB first before connecting it wirelessly; also had to get the MAC address via the setup on the LCD panel so the router could recognize it.
Some of that has gotten easier/automatic with Lion, so just be sure you follow whatever the quick setup sheet says. Their support is pretty good, they usually respond within a reasonable amount of time. -
I would like to know which app/software in MAC gives us the same feature that is provided by System Restore in Windows, and how does that work.
Time Machine is one such program, although it is a recursive backup program which offers limited archive capability, based on the capacity of the backup destination, and it requires you set it up before you start editing your files. Some programs are also Versions aware, which offers a kind of restore capability by file. Again needs to be setup before you start editing.
Just a for-your-info:
Mac is not an acronym, it is a nickname for Macintosh. -
Random freezes-please, somebody, help me find a solution that works!
I feel a little stupid posting a new thread for what seems to be (at the moment) a rather common issue, but almost every related thread I've come across seems to pin the blame on different things, and I want to consolidate all that I know about what's going on in one place.
On January 5 I reinstalled Arch on the family computer in my house, and for the first few days it seemed to be working OK, but as I was getting everything installed and set up correctly, I started experiencing random freezes. Every package has been up to date since this was a brand new install, and the whole reason I was reinstalling was because the old setup was really messy and on a really old hard drive. The old setup didn't experience any of these issues, however, which rules out hardware issues (the current hard drive was in the system, it just wasn't used for /). The computer passes memtest86+ and mprime stress tests.
First, the problem(s): random lockups. These range from application lockups that still allow mouse movement, but not clicking, with the keyboard remaining accessible, to full X lockups which disable mouse and keyboard functionality. The former have only occurred a handful of times while the latter occur much more often. I don't have an ssh server set up on this computer to know whether it would respond to use that way, but my assumption is that, yes, it would. This seems to be a rather prevalent issue right now, but like I said, a lot of people identify different causes and workarounds/fixes only work for some people.
A few weeks ago I looked around and everything I was finding suggested it was a video driver issue. I was using xf86-video-ati, so I switched to xf86-video-vesa. Things worked fine for about a day (which, for the record, is not uncommon; the problem seems to come and go, as for about a week the computer worked fine and then today I had four lockups in a row) but then it started to hang again. It's not a video issue. It's not a hardware issue. It's either a Gnome/GDM issue or an Xorg issue, a combination of both, or something else that is conflicting with either of those three.
I found this thread about X hanging whenever one presses enter. My issue seems to match the user in this thread (with it's corresponding bug report), because sometimes it hangs when I press enter—but only sometimes. The majority of the crashes, by my estimation, have nothing to do with whether or not I press enter. Often I (or someone else in my house) will simply click something and everything will freeze.
Beyond this I cannot really describe much else. However, here is some additional info which might help diagnose the problem.
From Xorg.0.log.old:
Fatal server error:
Caught signal 3 (Quit). Server aborting
.xsession-errors doesn't seem to contain anything worth noting.
When booting X also launches on tty2 instead of tty7. In the first few days after the install I seem to remember it launching on tty7 initially, but it's possible that my mind is playing tricks on me and this is not the case. If it is I do not know what accounted for the change. /etc/inittab is identical to the file on my personal PC which runs GDM and openbox, but which is experiencing no problems whatsoever, and X opens on tty7 on it (and which is also completely up to date). At post #13 in this thread there is a suggested edit for /etc/gdm/custom.conf, but it does nothing for me; X still opens on tty2.
GDM is the last daemon listed in /etc/rc.conf. I've tried loading the daemons before it backgrounded (with @) and also regularly (without), and neither makes a difference. The freeze often occurs when logging in or switching users, but I must emphasize that for the most part the lockups are completely random.
I am really hoping to find a fix, and the sooner the better, because 6 people regularly use this computer and constant freezes are unacceptable to my mind. I also fear that the exact same error has been occurring on my friends' business computer which I recently updated some packages on, since I've been getting emails about the computer locking up. Of course with that one I could simply downgrade everything I just updated, even though it'd be tedious to do so.
Last edited by tonyisnt (2010-02-02 23:24:46)mgangav wrote:
insanemal wrote:
change to lanuching gdm from your inittab using run-level 5
or remove agetty from tty2
both will resolve the issue.
Actually, how will running gdm from inittab help with this issue?
And I didn't understand what you meant by "remove agetty from tty2"
You know, I am pretty sure that the issue has to be with xorg. I was having this issue a lot a month ago, but then, a certain upgrade of xorg fixed the issue. I was fine for a few weeks. My computer never crashed. But, unfortunatly, a package in that same upgrade was broken and I ended up upgrading the system again a few weeks ago. xorg also upgraded at the same time. Now, my computer keeps crashing randomly and in random ways.
I think that the best thing to do is to keep up with the xorg updates, find one that works for your system and have pacman ignore all upgrades to xorg after that.
Actually, if anyone can tell me how to downgrade xorg to its state 3 weeks ago, it would be absolutely awesome.
Thanks
Because if you use runlevel 5 you dont have agetty on TTY2 so it won't try and kill xorg all the bloody time
The problem is caused because GDM is starting so fast the XORG server it loads up checks for free VT's and finds TTY2 is empty and starts on it. THEN your inittab fires up agetty on TTY2.. which promptly causes hell to arrive in a handbag.
You really need to be less critical of people offering you advice.. and possibly even check what they have posted in the past.. like the threads from months ago dealing with this issue. (search is great you know) -
Good iphone car mount that works with case?
I need a car mount for my iPhone so that I can use the phone's GPS app. I've looked around and so far I can only find mounts that work for iPhones without any case.
I would rather not have to remove the case everytime I got in my car, so are there any recommended mounts out there that work for phones with cases?
Thanks!Griffin makes an FM/lighter mounted model, which has several bottom mounting brackets, to fit several phone models. I tested it out today, but the ipod buttons on the model don't work correctly, and FM was spotty to awful, as always on these type of setups. It did hold my naked cellphone well, and wish it had worked as advertised - cost about $100 at Best Buy.
Belking has a similar model (about $70 at Best Buy), without the FM transmitter, also on a lighter stalk, which may work, since it grips the top of the phone with a wider clip, made to adapt to case thicknesses, I presume. I have not tried out this model, but may do so, since I have never found a single FM transmitter that works well - too much static, fading in and out, etc.
Is there anyone who can recommend a lighter mounted (on a flexible stalk) charger for the iphone, that has a stalk long enough to accommodate any rental car, I would very much appreciate it. -
Airtunes audio drop out solution that worked for me! :)
setup is DSL modem, AEBS main base station (software v5.6), AE (software v6.2), AE is in WDS mode as a remote base station. I am running OSX 10.4.3, and all software (itunes, etc) is updated current as of 6Nov2005.
using airport admin utility, i set both base stations to "g only" and still had audio drop outs. Then I left both of them on g only and set both of them on channel 5, (was on channel 10 before.) no airtunes drop outs!!
I have been audio drop-out free for a few days now and am cautiously optimistic- enough to post my solution. hope it works for you, too!Thanks Bryan! Glad to hear you found a solution that works for you. Your suggestions are also among the many solutions previously posted in the mother of all discussions on this topic found at:
Muhannad Al-Khurafi, "Audio Drop while using airtunes", 10:38pm Jul 21, 2004 CDT -
HP PSC 2355 Has anyone found a solution that worked ?
Re: HP PSC 2355 all in one
Has anyone found a solution that worked?
This printer used to work fine with Tiger – after a lot of headaches setting it up. Seemingly, after downloading a latest 10.4 up-grade, I lost all functions with this 3 in 1 printer. I’ve done all the procedures on the HP site, purged everything HP on my computer relating to applications, and re-installed the software. However, the printer does not show up on the ‘Printer List’ in the ‘Printer Setup Utility. Error message stating that ‘No default Device Detected’ or, Error ‘Sorry, scanner could not be initialized. (Scanner not found.)
Any help would be greatly appreciated.
Thank-you,
Steve
iMac G5 Mac OS X (10.4.7) iMac G5 1.8GHz, 20in.Re: HP PSC 2355 all in one
Has anyone found a solution that worked?
This printer used to work fine with Tiger – after a
lot of headaches setting it up. Seemingly, after
downloading a latest 10.4 up-grade, I lost all
functions with this 3 in 1 printer. I’ve done all the
procedures on the HP site, purged everything HP on my
computer relating to applications, and re-installed
the software. However, the printer does not show up
on the ‘Printer List’ in the ‘Printer Setup Utility.
Error message stating that ‘No default Device
Detected’ or, Error ‘Sorry, scanner could not be
initialized. (Scanner not found.)
Any help would be greatly appreciated.
Thank-you,
Steve
iMac G5 Mac OS X
(10.4.7) iMac G5 1.8GHz, 20in.
I am not sure if you are having the same issue or not since you did post this back in Dec but itf it is still a ongoing problem after downloading updates to the Mac OS follow this docuemnt --------------------------------------------------> http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00501015&produc t=422000&dlc=en&lang=en
And by the sounds of it i know you have gone though this document already
Download this driver it is the lates driver and it fixes alot of things
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?lc=en&cc=us&dlc=en&os=2 19&product=422000&lang=en&softwareitem=mp-42125-1
G4 Mac Mini Mac OS X (10.4.7)
Maybe you are looking for
-
Service cannot be reached while sending a smart form in html format
Hello, I'm trying to send a smart form as email in html format and I'm getting the following error message at the beginning of the message: Service cannot be reached What has happened? URL http://localhost/SAP/BC/BSP/SAP/SMART_FORMS/DEFAULT.CSS call
-
Hi, The Earpiece of my phone doesn't work when plugged. What is the way out? Thanks in advance! Tunji.
-
Why does "No Service" appear in the upper left hand corner since I updated?
-
What are the version of the database?
Hi Guru's What are the versions of the database which is comes with e-business suit? 11.5.10.2 9.2.0.6 11.5.10 11.5.9 11.5.8 Please give me the reply Thanks
-
Imovie, add clickable link to title
Want to make a clickable link in the title on iMovie, using MacBook Pro, went to substations and make link also add link but not getting it added? suggestions...