A severe technical problem

Hi all
so i'm using a iPod nano 4GB. i was happy with it till it started to mess up. Once when I turned on the iPod and pulled up Apple headphones, only one of it would work. I thought something must have happened with the headphones - indeed - one of them wasn't working also when put into some old discman. So I pulled headphones from it and started using them with the iPod. After few hours of using, one of them would stop working as well... BUT I remembered one of them had some problems previously, so I put in third pair... After three days of functioning, one of them would stop working as well! Now even if I put them to some other equipment, they won't work too. Then I put in Apple headphones again for a moment, and the second headphone broke as well...
So, do you think there's a problem with a jack or is there something else I should look for?

Hi ,
Could you please share the screen shot of the error message?
Is there any exit code mentioned in the error message along with 76C3F0F6-9B9D-35DA-81C6-CA8A88CC93CA} HRESULT 0x80070002 ?
Hope you have performed all the troubleshooting steps mentioned in the referring documents for this error .
Regards
Sukrit Dhingra

Similar Messages

  • I bought several season of a tv series in the German Apple Store. Now they are gone due to technical problems (no backup). How do I get them back? ATTENTION: Meanwhile I moved to Switzerland and the Swiss Store doesn't offer tv series.

    I bought several season of a tv series in the German Apple Store. Now they are gone due to technical problems (no backup). How do I get them back? ATTENTION: Meanwhile I moved to Switzerland and the Swiss Store doesn't offer tv series.

    Albenn
    Welcome to the Apple user discussion forums
    I'll hit a few of your questions - others will have to do others since I'm not up on some of the issues you ask about
    4) is there an easy way to review/delete items (in 6, i run a basic slideshow and delete on the fly -- is this still workable in 7?)?
    Yes
    5) Are there significant functionality benefits of 7 over 6 (e.g., does the noise function or shadow/highlight really offer significant benefits? The Events seems obvious, but I'm more interested in "under the hood" experience
    Yes
    Loseless editing - web galleries - events
    a) Is import any faster? As my library is growing in size, the import is getting overly slow
    It is fine for me (only you can compare to your current) - I have 20542 items using 26.3 GB in 271 events
    7) Is there a full-screen edit mode?
    yes
    8) Can you configure events so that it's not just by day?
    yes
    9) Is 6's "roll" structure as mirrored in the file system still available in the Events approach, or is the database structure that once you've converted a library, there's no going back?
    Events replace rolls (if your rolls are named - NOT the default rollxxx name - they will come across as is - to me events are rolls with much more capability and a new name - some people are VERY putoff by the change (but most love it) for reasons that I simply do not comprehend
    10) What is the effective (or advised) maximum library size? I've probably got over 60GB of images in my libraries now, with 20,000 images or so. If 7 can readily digest them (and preserve all my albums, etc.), then I'd love to combine them into one, unless that will kill performance, make the database unstable, drive backups into interminable waits, etc.
    The advertised max is 250,000 photos - I have about the same number of photos as you in about 1/3 the space - there are a few users here with libararies your size. With iPhoto Library Manager it is easy to maintain multiple libraries if you choose
    LN
    Message was edited by: LarryHN

  • I was given a new phone because of a technical problem with my other. Everything was replaced because of iCloud but now it is telling me I do not have enough storage room on this phone to perform a back-up. Can I fix this?!

    I was given a new phone because of a technical problem with my other. Everything was replaced because of iCloud but now it is telling me I do not have enough storage room on this phone to perform a back-up. Can I fix this?!

    Why don't you call Apple tech support thru your provider. They will be able to help you in short order.
    PS - If you want help here you need to provide a little more information i.e. how much memory does your iPhone -4- have and how much free memory do you have after restoring from the cloud?

  • Signed applets in 1.4.1: non-trust ignored: severe security problem?

    Hello all,
    I am signing applets with a developer certificate.
    Until know everything worked fine with Plugin 1.3.1.
    Know I changed to Plugin 1.4.1 and encountered a strange behaviour: When I open the HTML page with a browser (tried IE 5.5 and Mozilla 1.1) the certificate-question pops up. The problem: if I choose not to trust the certificate, the applets starts nevertheless and I can use the system clipboard inside my Applet (for what applets needs to be signed)!
    This looks like a severe security problem!
    Does anyone know anything about this? Can you reproduce this?
    thanx!
    Marcus

    Hi,
    I tried to reproduce what you said with plugin 1.4.0 (I don't have 1.4.1 yet) and IE6.0 (It doesn't have anything to do with the browser)
    My Java console said :
    "User has denied the priviledges to the code
    writeFile: caught security exception"
    The security seems to work OK in 1.4.0.
    I will have to try 1.4.1.
    Patrick

  • Is there an update to iOS 6? I've been having several technical issues since the upgrade. Uncontrolled zoom of the entire screen, Siri taking 25 seconds to respond and not recognizing names, locking up of the phone. All requiring a reset.

    Is there an update to iOS 6? I've been having several technical issues since the upgrade. Uncontrolled zoom of the entire screen, Siri taking 25 seconds to respond and not recognizing names, locking up of the phone. All requiring a reset.

    I would restore with backup and if that doesn't fix it try as new
    http://support.apple.com/kb/HT4137

  • How to report Technical Problem in N78?

    Dears,
    I want to know how i can report a technical problem in the N78 to Nokia Company?
    Thank you

    The English language is a hybrid of numerous European influences.
    English speakers in Europe, Australasia, Africa and Asia use the spelling Centre, whilst North American English speakers use Center.
    If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

  • Sorry, There was a technical problem. Please try a...

    Here's the thing.
    1. Goto ANY nokia regional website, and navigate to:
    Device software update \ Can I update?
    2. Enter ANY legitimate Product code
    3. Get the following message:
    "Sorry, There was a technical problem. Please try again soon."
    There are NO announcements, or forum news entries, no notifications of downtime etc..
    Many people (like myself) are trying to get nokia users on their feet and I think we'd appreciate a headsup.
    Please give details, eta etc..
    Tnx,
    ~VV~
    Solved!
    Go to Solution.

    forum.dailymobile.se...Also its not totally unfounded rumors. Nokia already announced before that they will release Symbian^3 this year and Symbian^4 next year and MeeGo was announced as likely this year or next. Not to mention circulating pictures of a phone with the same aesthetic design of the N8 but has a sliding four row qwerty keyboard.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Technical problem with starting a PLM workflow!

    Hey!
    I am trying to start a workflow with a document, but get this message with a red light.
    Doc:10000000438-PDC-00-000,Table SWWWIHEAD cannot be written
    Anyone how now what can be wrong?
    I am quit sure that this is a technical problem.
    Thanks

    Hi.
    With help of some technical staff in our company I did manage to find out what was wrong. I am posting it hear so anyone else having this kind of problem in the future can find out of it self. 
    The reason for not starting this workflow is as follow:
    The workflow is writing to the table SWWWIHEAD. Some time’s the workflow is writing to a row/entry in the table that is all ready written. Therefore the system is returning an error message. This can be solved as follow:
    Go to transaction SM56, where it is possible to reset the buffer.
    The following field have to be filled:
    Client <relevant client>
    Object SWW_WIID
    Sub-obj
    Range 01
    Year 0000
    Global Reset X
    If this does not help, a programmer has to do a manual change in the table.
    Cheers!

  • Technical problem

    Hello looking for some help with my q10 when I insert the SIM card all if fine and after a few mins it's saying searching for network and then bam technical problem. I have try by fixing the slot for the SIM card and it the same problem running out of ideas need real help now .

    I think your issue is more than can be dealt with on a forum.
    If you believe the device is defective and it is under warranty, you should contact the seller. If you have damaged the device, or your efforts have created signs of user damage, your warranty claim could be in jeopardy.
    If you don't have a warranty claim but do have access to repair services, my advice is get an estimate and make a decision from there.
    - Ira

  • Can you help with technical problems with the stereo imagry option

    can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3'

    Because this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
    "can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
    And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it?

  • Smart Mailbox Technical Problem

    I have 3 email accounts set up in Mail. I set up a smart mailbox and used the criteria "messages flagged" and "messages unread" to describe what emails should go into the mailbox. Each time I send an email, however, the sent emails end up in the smart mailbox. The "include messages from sent" box is NOT checked, yet this technical problem persists. Any advice on how to rectify this problem? Thanks.

    I don't think this is an "improvement", this is a bug, and needs fixing. I use "entire message contains" a lot in my smart mailboxes as it allows me to gather together a large number of disparate emails together by listing a handful of email addresses. I tried the solution of listing email addresses separated by commas: nothing. I tried putting them in quote marks. It worked but gave me inconsistent results; sometimes it listed all the emails containing one of the addresses listed, sometimes it listed only the emails that contained all the address listed. As an experiment I tried changing the setting to 'entire message does not contain"; results remained the same. Fix this one soon, please, I have a lot of smart mailboxes that don't work any more!

  • Forum technical problem

    I think after upgradation of this forum few days back now this forum is very slow and also some time it is not accessible due technical problem. Does any one experiencing similar problem?
    Thanks,
    Sujnan

    Sujnan,
    I get exactly the same problems.
    The time to go to a post is noticably slower. Some times I can get a cup of coffee before it has completed.
    On average there are 2 times a week that the service is not available due to technical problems.
    Maybe we could get some information from one of the Oracle people.
    Ivan

  • HT1657 My rented movie didn't work due technical problems and now I paid the renting for nothing, can I claim back the rental?

    My rented movie didn't work due technical problems and now I paid the renting for nothing, can I claim back the rental?

    Hello Pauljfield,
    You may want to report the issue you've had with your rental to the folks in our iTunes Store.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Cheers,
    Allen

  • Have netflix account but have had to change account that payment is coming from. Each time I try to do this it tells me netflix is experiencing technical problems. My account is overdue because of this. How can I solve this problem thanks.

    Have a current netflix account but need to change account payment is coming from. Have tried doing this for past few days however it keeps coming back with netflix is experiencing technical problems. My account is now overdue because of this.mhow canning solve this. Thanks

    Then it has nothing to do with Apple. Go into your Netflix account and update your number. If you're having issues contact Netflix.

  • Severe Call Problems (drops, bricks, ghost calls)

    Had the original since soon after it came out and had virtually no problems. Just bought the 3G Black 3G version last night. Several major problems right out of the gate:
    1. During a call the touch screen blacks out (call is still live). If one requires the touch pad interface to get through a customer service maze, for example, the phone is useless. Has happened twice but is not foolproof repeatable.
    2. During a call, another random call from my contacts will be initiated and place the current call on hold, AND the touch screen blacks out. The new Ghost call continues and you can't stop it because you can't interface the phone. SUPER embarrassing. Has happened twice, not foolproof repeatable (but probably because I'm losing a willingness to actually use the phone).
    3. After every call (repeatable, every time) the device instantly powers off.
    4. Dropped call, plus instant power down.
    My 3G seems to fly and everything else non-phone related seems fine... but I have yet to experience a full beginning-call-to-end-call success. I loaded up some music and photos and synced my contacts to Google and loaded one app (NY Times)... that's it.
    At this point I have a great PDA but not a meaningfully reliable phone. Any help is most appreciated... because I NEED a reliable phone! (duh!) I've perused the subjects and keep up on the news and see lots of drop problems but nothing like this... maybe I just got a dud?

    Ah hah! User error! Trying to pull a fast one on the plastics industry I weaseled my original model semi-soft Belkin case onto the 3G, apparently hosing the proximity sensor and otherwise causing unintended contact with assorted areas of the interface. $30 to the apple store for more precisely 3G molded plastics later, and full functionality is restored, 2nd day was in pretty heavy usage, crystal clear, no drops, zippy Internet. 3G is actually strong and speedy here in eastern MA, fwiw. Insanely overpriced plastic but worth every penny in the end.
    Many thanks. Sorry, iPhone haters.

Maybe you are looking for

  • Selection problem in JTable

    Hello everyone, I've a JTable,which I'm rendering using my own renderer.When the background of any cell within the table is rendered,that particular row does not get highlighted on mouseclick.However,when only the foreground is set (without setting t

  • Win 8.1 media player

    does win 8.1 media player 12 have an equalizer in the audio area?

  • Payment made twice for an invoice

    Payment made twice for an invoice.We have posted an invoice on 23.11.2008 in a company code for a vendor,then F110 was run on 24.11.2008 and was paid.Then again on 25.11.2008 payment was done for the same invoice.The clearing doc of payment run on 25

  • How do you specify a "custom data retrieval program" for a query ?

    I may have to rebuild an old SQ01 query in ECC 5.0 to get rid of some hyphens in structure field names. The query gets its data from a custom retrieval program. How do I specify the custom retrieval program when (and if) I redo the query? Thanks Dave

  • Stop starting apps popping up in front

    Sometimes I am working in – let's say – Mail and I decide I am going to need – let's say – Word a bit later. Then I click the Word icon in the Dock and continue working in Mail. The problem is, that various Word screens keep popping up in front of Ma