A short memo during incoming call

Some Nokia phones allow to add short memo to the contact.
Is there a possibility in Nokia phones to show this memo during incoming call?
I have a big number of contacts and additional short memo would help to recollect details about caller.
Artur

you can use the notes field of a contact to store extra info, i think you can see this whilst in a call by going to the phonebook - but i dont think this info will pop up when a call comes in

Similar Messages

  • All my contacts are stored with country code for eg   233 244 123456. Contact names do not appear during incoming calls. Once the country code is removed , names appear. Please help

    All my contacts are stored with country code for eg   +233 244 123456. Contact names do not appear during incoming calls.
    Please help

    http://discussions.apple.com/thread.jspa?threadID=2280669&tstart=0

  • HT4515 phone does not ring during incomming call

    phone does not ring during incomming call

    Is the phone silenced? Check the button on the side of the phone above the volume buttons if you see an orange line it is silienced, slide it to the front of the phone and it should correct this.  Also ensure the volume is up.  If you've checked these and still nothing are you able to call people? do you have service?

  • My iPhone5 is under warranty but during incoming call handset is hang. this problem 2-3 time a day. pleas help.

    My iPhone5 is under warranty but during incoming call handset is hang. this problem 2-3 time a day. pleas help.

    I'm experiencing what is I believe to be the same issue with my iPhone 4, and have been suffering in silence for about a week.
    iPhone 4 model MC603X with Modem Firmware 04.10.01, 16Gb, cheap silicone cover, Vodafone NZ as my carrier.
    My screen locks after 1 minute of inactivity as it should with my settings. Perhaps 1 call in 5, or 1 call in 10, the screen wakes up and displays called ID information etc correctly, but I cannot swipe to answer the call. The touch screen simply fails to respond.
    If I push the power button briefly to silence the ringtone, this does not make a difference. The iPhone has to be locked (and screen turned off), then push a hardware button to wake up the display, and then I can swipe to unlock the device.
    This is only since iOS 4.3 and unfortunately iOS 4.3.1 has not changed this behaviour.
    Any advice appreciated.
    Cheers, Mike

  • Blackberry 9300 Freeze During Incoming Call

    Device: Blackberry Curve 3G 9300
    OS: 6.0 Bundle 2475 (v6.0.0.546)
    Application Storage Free Space: 43.3MB
    Carrier: Maxis Communications (Malaysia)
    My phone has been freezing up randomly during incoming calls for the last 3 weeks. Sometimes I am able to pick up the call but most times it just freezes up. During the freeze, all the buttons will not work and the phone will just keep ringing until the call has been canceled/dropped from the other end.
    There are 3 scenarios:
    1. Phone works as normal. 
    2. Incoming call comes in, phone freezes up, I pull the battery out, phone reboots and everything is fine until the next freeze. I can recieve SMS and all application works as normal.
    3. Incoming call comes in, phone freezes up, I do nothing and let the call end. Screen will black out after a few seconds and none of the button works. Next incoming call comes in, the screen lights up to show the incoming call but none of the button works just like before. In the end, I have to pull out the battery.
    Here are some of the things I have tried:
    1. Deleting applications from my phone to free up memory (Facebook, Yahoo Messenger, Google Messenger)
    2. Deleting pictures to free up memory
    3. Updating the phone to the latest software version. Previously it was on version 5 but the freeze happened then too.
    4. Reseting my phone to use the original theme.
    I have never dropped my phone (not even once) and I have been using this same phone for the last 10 months. I still have 2 months left before my warranty expires. I really look forward to getting help from the experts here before I take the last option of bringing my phone to the service center.

    Basics from the manual are restart, reset, restore from backup, restore as new.

  • My iphone 5C touch wont works some times , mostly during incoming call i cant take the call or some times password inputs wont works.

    My iphone 5C touch wont works some times , mostly during incoming call i cant take the call or some times password inputs wont works.

    Greetings naseem770,
    It sounds as if you are having an intermittent issue with touchscreen response on your iPhone. I would suggest that you troubleshoot using the steps in this article - 
    If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • NEW 9320! CURVE HANGS ...!DURING INCOMING CALLS! NO BUTTON WORKS! PLS HELP ME

       Recently, i was purchased New 9320. I am very much fedup with this new 9320The phone completely hangs during my incoming calls , no button works & nothing happens. . Each and every time I’ve  to remove the battery & reboot 4 to 5 times.
     This happened once when it was in the holster too ,said “keypad locked” and nothing except the power off button worked (the power off button did nothing to help though)
        This is frustrating ,especially for a first time Blackberry user like me
       Is it a software problem with the 7.1 OS or something else? Please any one help me.

    That is what I am doing right now, but thats a short term solution. It happens 7-10 times a day. Have to do this exercise again and again.
    Is not there a permanent solution for this problem ?
    Thanks

  • N95 - 8GB , During incoming call it will show the ...

    When incoming call it will show the contact name and also the contact number which is harm to the privacy of the contact numbers also...
    So please some one tell me how to avoid this problem , otherwise everybody around me will come to know all my contact numbers without go to the phone book during a call......

    I dont really see how everybody around you could see the numbers. This was done to show you who was calling and from what phone number you have saved. This is the built in caller ID, and no amount of resetting will fix this to my knowledge.
    For the people around you to see, Its pretty gross and unusual for people to look at your phone and try to memorize the small font numbers. You arent giving them enough time. 2 secs flat when you look at the phone, slide it open and put on your ear isnt enough for people to view and memorize 8-12 digit numbers.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Lenovo k3 note screen not displaying name during incoming call

    i have purchased my K3 note 3 weeks ago, i recently noticed that during some incoming calls the screen does not show who is calling the screen does not lite up, only the ringtone is heard.please advice what to do, should i replace the phone .please help.

    Please give any suggestions I formated my phone too but the problem exists

  • IOS 4.3 - screen locked during incoming call

    Hello, all!
    I have interresting problem after I update iOS 4.2 up to iOS 4.3 on my iPhone 4. Sometimes (1 time per each 10-20 times) when incoming call is received, ipone playing the ringtone, vibration is generated and I see on display usually information "incoming call from..." and slide button to receive call - then touch screen of iPhone becomes fully locked and I can not receive the call ! Hardware pushbuttons (power and volume control) still working, but display is fully locked! In this case it is only one way to answer the call - using bluetooth headset. Any other way and any other operations have no any effect - iPhone still playing rington and still waiting when I answer the call.
    This situation occurs aproximately on every 10th or 20th incoming call - i.e. one or two times per each day. And, of cource, this is usually very important call that i can not answer because of this stupid situation.
    The problem was detected after I update iOS 4.2 up to iOS 4.3 via iTunes.
    So, please tell by wich way it is possible to fix this bug and where I have to send notification to solve this problem in the shortest time?
    Thanks!

    I'm experiencing what is I believe to be the same issue with my iPhone 4, and have been suffering in silence for about a week.
    iPhone 4 model MC603X with Modem Firmware 04.10.01, 16Gb, cheap silicone cover, Vodafone NZ as my carrier.
    My screen locks after 1 minute of inactivity as it should with my settings. Perhaps 1 call in 5, or 1 call in 10, the screen wakes up and displays called ID information etc correctly, but I cannot swipe to answer the call. The touch screen simply fails to respond.
    If I push the power button briefly to silence the ringtone, this does not make a difference. The iPhone has to be locked (and screen turned off), then push a hardware button to wake up the display, and then I can swipe to unlock the device.
    This is only since iOS 4.3 and unfortunately iOS 4.3.1 has not changed this behaviour.
    Any advice appreciated.
    Cheers, Mike

  • My i phone freeze during incoming call i call not slide to receice the call please help me

    My phone freeze during incoming cal

    Basics from the manual are restart, reset, restore from backup, restore as new.

  • IPhone 4 clicks off during incoming call, drops call within 10 seconds

    so i've had zero issues with my iPhone 4 until now; no antenna nonsense, no proximity sensor problems. last nite a friend called me, and i barely got to say "how are you" when the phone made the clicking sound, clicked like when you're putting the screen to sleep from being awake, and the call was dropped. same thing happened today. as far as i can tell, it only happens on incoming calls, i can't get the issue to replicate on an outgoing call.
    anyone else with this problem or know of a fix? AT&T reception isn't fantastic where i live, but i typically get 2-3 bars in my room. thanks in advance.

    AT&T reception isn't fantastic where I live
    There's your keywords.
    You can try performing a 'restore as new iPhone' if you used 'restore as backup' from a 3GS to i4. Some have reported the backup had more problems than using a 'new iPhone' restore.
    Afterwards, try calling your iPhone and pickup. See if it lasts higher than 10 seconds. If your iPhone hangs up, it could be a bad iPhone or it could be a bad AT&T connection.
    I would report your problem area to AT&T that you can't make calls and have your iPhone checked. They can have their towers checked for faulty connectivity.

  • Unable to view contact photos during incoming calls after 7.1 upgrade.

    This was working fine up until the phone was upgraded on my 5s
    Has any one else had the same problem, and if so do you know of a fix?

    Same thing has happened to my wifes phone, upgrading to 7.1 on her 5s.

  • How do i get fullscreen photoes during incoming calls

    After updating my iphone 5 to iOS 7.1 a callers photo became small and i would like to have a fullscreen photo back. is possible?

    That feature was removed in iOS 7.1. You can tell Apple you'd like it back here:
    http://www.apple.com/feedback

  • No sound or Vibration for Incoming calls if phone is placed in pocket due to slight touch on the screen

    During incoming calls, a small touch on the screen will switch off the Sound and the vibration. This happens when the phone is placed inside the pant pockets. So i am missing many calls when i am travelling out. Any setting to remove this feature. 
    I tried using flip case but its spoiling the look of my Z10. So please help if there are any software setup 

    You can restore your phone to factory settings if you wish to see if it corrects your issue. Resetting to factory settings will wipe out all your data so you should save it first. To save all your stuff download and install BlackBerry Link on your computer from the link below. Resetting will not back-up the OS on your phone. Once you have downloaded and installed BlackBerry Link connect your phone to your computer and save your stuff. Once saved disconnect your phone from the computer.
    To reset your phone: tap the Settings App, scroll down and tap Security and Privacy, tap Security Wipe, tap the blank box and enter blackberry.
    Once Wiped reconnect your phone to your computer and install your stuff.
    http://us.blackberry.com/software/desktop/blackberry-link.html
    http://ca.blackberry.com/software/desktop/blackberry-link.html
    If you are in a different country, choose country at the bottom of the page.

Maybe you are looking for

  • How can I set up firefox (latest version) to default to opening things in a new window and not a new tab.

    there is an option in firefox (latest version)(for windows7) to 'open new windows in a tab instead' what I want to do is to 'open new tabs in a window instead' Is this possible and how do I go about it

  • Satellite Pro A200 - Can't install Windows 7 due missing CD/DVD driver

    Hello, I have a Satellite Pro A200, PSAE4E-046018N5 and I'm trying to install Windows 7 but I can't pass from step one because it doesn't found a driver: A message box saying: A required CD/DVD drive devise driver is missing. If you have a driver flo

  • Workflow status is getting cancelled .

    Hi All , I am using a workflow which working completely fine but at the end of workflow I am getting the status as ''CANCELLED" rather than Completed, I can see in the log that after the complition of last step I am getting the status logically delet

  • Java System App Server 9 + CRLs?

    Hi all - I'm trying to set up my web apps under Java System App Server 9 on a Windows 2003 (Server) box. Everything is working just dandy, except that I cannot seem to get JSAS9 to recognize a Certificate Revocation List for my Certificate Authority

  • Expression Executing in sql

    Dear All, We are facing one issue in SQL Function. We are unable write function to get calculated value. We have one table, which has three columns. PayHead      Amount     Action Basic           5000          HRA            2000        Add CCA