A simple query in My SQL what is the similer query for that in Oracle ???

hello friends
In My Sql if i have 1000 records in a table and i want to get the records from 400 to 550 then it is posible by giving the following query
Select * from Table a , table b where condition "List 400,550" gives the records from 400 to 550
what is the coresponding query for this in oracle database
any one help me pls
mail me to [email protected]

Genericly, if you want records N through M from a SELECT statement, there's a wonderful article on asktom.oracle.com
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:127412348064
Justin

Similar Messages

I have a Mac OSX 10.5.8 processor dual 2 ghz powerpc g5 what is the next update for that?

I have a Mac OSX 10.5.8 processor dual 2 ghz powerpc g5 what is the next update for that?

There is none. You are at the end for a PPC machine. To upgrade you need to purchase an Intel Mac.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Hi there, why my hp dv6700 laptop having a pink monitor. What's the main reason for that? thank you

Hi there, why my hp dv6700 laptop having a pink monitor. What's the main reason for that? thank you

If all is pink (but you see the desktop), then normally one colour cable is broken - I think blue is off.
In your case (laptop) the connection to the display seems to be damaged, so the blue information is lost.
Normally you can test it when you twist the connection between pc and monitor. But I don't know if this works with a laptop.
V.
*** Say 'Thanks' with Kudos ***

What kind of financial periods exist in SAP? What is the relevant table for

What kind of financial periods exist in SAP? What is the relevant table for that?

Hi venumadhav
                In FInancial Accounting , Period is during time that you post G/L account and you have to close period after end of period and you will see the balance each G/L Account in each period.
                 There are 12 normal period and 4 special period (normal case , but can be changed by configuration ). normal period are Jan , Feb ,...Dec and Special period are the extended period that use for posting in special case .For example if you close period in Dec and you have to adjust G/L Account by auditor checking , you can post G/L Account to special period . special period are 13,14,15,16. 12 may use for Audit , 13 may use for changing after Sending to audit and found something mistake . that 's sample.
              normally there is posting date to control the period (BUDAT) in the table BSIS. if the posting date is in the during time of period , we can say this posting is in that period .
posting date : 03.09.2007            period : 09
posting date : 30.11.2007            period : 11
Regards
Wiboon

What is the best encoder for a quicktime movie into iDVD...?

i seem to be having some issues with picture quality once the DVD is actually made... i do have my preferences set at professional quality, but i think my problem may be with the original source file... what's the best format for that...? H264...? mpeg4...? pro res...?
thanks

Since you are just researching, I am going to make this as short and sweet as possible.
The 27 inch screen IMac is your only option. You need to have one with the fastest i7 CPU, fastest Graphics processor. Order one with the base 8 GBs of RAM and add additonal RAM through cheaper third party Mac RAM suppliers.
My preference is for the standard ATA 7200 rpm drives as the Fusion-type drives are not proven technology, yet.
If you want a really fast iMac and can afford it, consider an internal or external solid state drive (SSD) as these drives ard very,very fast.
For external drives fast drives are ones that use USB 3, Thunderbolt and/or FireWire 800 connections.
Stay away from external USB 2.0 external hard drives. They aren't fast enough.
You need an adapter adapter for your mini DV camera.
You are going to need some make of separate high speed audio interface box for instruments and vocals.
Look at interface boxes from M-Audio.
And you'll need to budget for a third party, good quality, high speed external FireWire 400/800 CD/DVD optical drive.
Plus, very seriously consider the purchase of extended 3-year AppleCare Warranty plan.
Something will go wrong with an iMac between 1-5 years.
Three years of warranty protection offers free repairs and replacement of you have hardware failures.
Good Hunting!

Two or more productid will be accquired by same customerid, by same shipvia, on the same day of the week of shipped date. i want the simple query for this.

consider this situation,
Two or more productid will be accquired by same customerid, by same shipvia, on the same day of the week of shipped date. i want the simple query for this.
my tables are from northwind:
[orders] = OrderID, CustomerID, EmployeeID, OrderDate, RequiredDate, ShippedDate, ShipVia, Freight, ShipName, ShipAddress, ShipCity, ShipRegion, ShipPostalCode, ShipCountry.
[orders details] = OrderID, ProductID, UnitPrice, Quantity, Discount.
i tried some but it is not exact, it gives wrong result.
select pd.CustomerID,pd.ProductID, pd.no_of_time_purchased, sd.ShipVia, sd.same_ship_count, shipped_day from
select ProductID,o.CustomerID,COUNT(productid) as no_of_time_purchased
from orders o join [Order Details] od on o.OrderID=od.OrderID group by ProductID,o.CustomerID
having count(od.ProductID) >1) pd
join
(select OrderID,customerid, shipvia, count(shipvia)as same_ship_count, DATENAME(DW,ShippedDate)as shipped_day from orders
group by customerid, ShipVia, ShippedDate having COUNT(ShipVia) > 1 ) sd
on sd.CustomerID=pd.CustomerID

Hi,
I think I have a solution that will at least give you a clue how to go about it. I have simplified the tables you mentioned and created them as temporary tables on my side, with some fake data to test with. I have incldued the generation of these temporary
tables for your review.
In my example I have included:
1. A customer which has purchased the same product on the same day, using the same ship 3 times,
2. Another example the same as the first but the third purchase was on a different day
3. Another example the same as the first but the third purchase was a different product
4. Another example the same as the first but the third purchase was using a different "ShipVia".
You should be able to see that by grouping on all of the columns that you wich to return, you should not need to perform any subselects.
Please let me know if I have missed any requirements.
Hope this helps:
CREATE TABLE #ORDERS
OrderID INT,
CustomerID INT,
OrderDate DATETIME,
ShipVia VARCHAR(5)
CREATE TABLE #ORDERS_DETAILS
OrderID INT,
ProductID INT,
INSERT INTO #ORDERS
VALUES
(1, 1, GETDATE(), 'ABC'),
(2, 1, GETDATE(), 'ABC'),
(3, 1, GETDATE(), 'ABC'),
(4, 2, GETDATE() - 4, 'DEF'),
(5, 2, GETDATE() - 4, 'DEF'),
(6, 2, GETDATE() - 5, 'DEF'),
(7, 3, GETDATE() - 10, 'GHI'),
(8, 3, GETDATE() - 10, 'GHI'),
(9, 3, GETDATE() - 10, 'GHI'),
(10, 4, GETDATE() - 10, 'JKL'),
(11, 4, GETDATE() - 10, 'JKL'),
(12, 4, GETDATE() - 10, 'MNO')
INSERT INTO #ORDERS_DETAILS
VALUES
(1, 1),
(2, 1),
(3, 1),
(4, 2),
(5, 2),
(6, 2),
(7, 3),
(8, 3),
(9, 4),
(10, 5),
(11, 5),
(12, 5)
SELECT * FROM #ORDERS
SELECT * FROM #ORDERS_DETAILS
SELECT
O.CustomerID,
OD.ProductID,
O.ShipVia,
COUNT(O.ShipVia),
DATENAME(DW, O.OrderDate) AS [Shipped Day]
FROM #ORDERS O
JOIN #ORDERS_DETAILS OD ON O.orderID = OD.OrderID
GROUP BY OD.ProductID, O.CustomerID, O.ShipVia, DATENAME(DW, O.OrderDate) HAVING COUNT(OD.ProductID) > 1
DROP TABLE #ORDERS
DROP TABLE #ORDERS_DETAILS

What is the best program for designing event flyers? I am looking for something basic and simple.

What is the best program for designing event flyers? I am looking for something basic and simple.

Poor old Photoshop® is forever being put down when it comes to layout work, but it is perfectly capable, and can output a high quality print PDF the printer will be perfectly happy with. OK you don't have the text flow between columns bells and whistles of InDesign and [spit] Publisher, but if you have a $10/month Photoshop/Lightroom subscription, instead of the $50/month full subscription, don't think you can't do a perfectly good flyer or poster.
https://helpx.adobe.com/photoshop/how-to/align-objects-guides.html

Simple question: What's the Mac shortcut for size???

What's the Mac shortcut for increasing the size of the online image?
Thank you

Safari offers only two choices, zoom page and zoom text only.
To zoom images, you have to look for a safari extension.
I have not tested any, so I have no information about any of it.
Best.

How to find out what are the interfaces used for Job and Job Codes

HI All,
I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
Thanks In Advance
Sunny

Hi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya

What is the best practice for inserting (unique) rows into a table containing key columns constraint where source may contain duplicate (already existing) rows?

My final data table contains a two key columns unique key constraint. I insert data into this table from a daily capture table (which also contains the two columns that make up the key in the final data table but are not constrained
(not unique) in the daily capture table). I don't want to insert rows from daily capture which already exists in final data table (based on the two key columns). Currently, what I do is to select * into a #temp table from the join
of daily capture and final data tables on these two key columns. Then I delete the rows in the daily capture table which match the #temp table. Then I insert the remaining rows from daily capture into the final data table.
Would it be possible to simplify this process by using an Instead Of trigger in the final table and just insert directly from the daily capture table? How would this look?
What is the best practice for inserting unique (new) rows and ignoring duplicate rows (rows that already exist in both the daily capture and final data tables) in my particular operation?
Rich P

Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you need to read and download the PDF for:
https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
>> My final data table contains a two key columns unique key constraint. [unh? one two-column key or two one column keys? Sure wish you posted DDL] I insert data into this table from a daily capture table (which also contains the two columns that make
up the key in the final data table but are not constrained (not unique) in the daily capture table). <<
Then the "capture table" is not a table at all! Remember the fist day of your RDBMS class? A table has to have a key. You need to fix this error. What ETL tool do you use?
>> I don't want to insert rows from daily capture which already exists in final data table (based on the two key columns). <<
MERGE statement; Google it. And do not use temp tables.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Hi guru's what is the diff between for all entries & joins

hi guru's what is the diff between for all entries & joins

Hi Vasu,
Joins are used to fetch data fast from Database tables:
Tables are joined with the proper key fields to fetch the data properly.
If there are no proper key fields between tables don't use Joins;
Important thing is that don't USE JOINS FOR CLUSTER tableslike BSEG and KONV.
Only use for Transparenmt tables.
You can also use joins for the database VIews to fetch the data.
JOINS
... FROM tabref1 [INNER] JOIN tabref2 ON cond
Effect
The data is to be selected from transparent database tables and/or views determined by tabref1 and tabref2. tabref1 and tabref2 each have the same form as in variant 1 or are themselves Join expressions. The keyword INNER does not have to be specified. The database tables or views determined by tabref1 and tabref2 must be recognized by the ABAP Dictionary.
In a relational data structure, it is quite normal for data that belongs together to be split up across several tables to help the process of standardization (see relational databases). To regroup this information into a database query, you can link tables using the join command. This formulates conditions for the columns in the tables involved. The inner join contains all combinations of lines from the database table determined by tabref1 with lines from the table determined by tabref2, whose values together meet the logical condition (join condition) specified using ON>cond.
Inner join between table 1 and table 2, where column D in both tables in the join condition is set the same:
Table 1 Table 2
A
B
C
D
D
E
F
G
H
a1
b1
c1
1
1
e1
f1
g1
h1
a2
b2
c2
1
3
e2
f2
g2
h2
a3
b3
c3
2
4
e3
f3
g3
h3
a4
b4
c4
3
|--|||--|
Inner Join
A
B
C
D
D
E
F
G
H
a1
b1
c1
1
1
e1
f1
g1
h1
a2
b2
c2
1
1
e1
f1
g1
h1
a4
b4
c4
3
3
e2
f2
g2
h2
|--||||||||--|
Example
Output a list of all flights from Frankfurt to New York between September 10th and 20th, 2001 that are not sold out:
DATA: DATE LIKE SFLIGHT-FLDATE,
CARRID LIKE SFLIGHT-CARRID,
CONNID LIKE SFLIGHT-CONNID.
SELECT FCARRID FCONNID F~FLDATE
INTO (CARRID, CONNID, DATE)
FROM SFLIGHT AS F INNER JOIN SPFLI AS P
ON FCARRID = PCARRID AND
FCONNID = PCONNID
WHERE P~CITYFROM = 'FRANKFURT'
AND P~CITYTO = 'NEW YORK'
AND F~FLDATE BETWEEN '20010910' AND '20010920'
AND FSEATSOCC < FSEATSMAX.
WRITE: / DATE, CARRID, CONNID.
ENDSELECT.
If there are columns with the same name in both tables, you must distinguish between them by prefixing the field descriptor with the table name or a table alias.
Note
In order to determine the result of a SELECT command where the FROM clause contains a join, the database system first creates a temporary table containing the lines that meet the ON condition. The WHERE condition is then applied to the temporary table. It does not matter in an inner join whether the condition is in the ON or WHEREclause. The following example returns the same solution as the previous one.
Example
Output of a list of all flights from Frankfurt to New York between September 10th and 20th, 2001 that are not sold out:
DATA: DATE LIKE SFLIGHT-FLDATE,
CARRID LIKE SFLIGHT-CARRID,
CONNID LIKE SFLIGHT-CONNID.
SELECT FCARRID FCONNID F~FLDATE
INTO (CARRID, CONNID, DATE)
FROM SFLIGHT AS F INNER JOIN SPFLI AS P
ON FCARRID = PCARRID
WHERE FCONNID = PCONNID
AND P~CITYFROM = 'FRANKFURT'
AND P~CITYTO = 'NEW YORK'
AND F~FLDATE BETWEEN '20010910' AND '20010920'
AND FSEATSOCC < FSEATSMAX.
WRITE: / DATE, CARRID, CONNID.
ENDSELECT.
Note
Since not all of the database systems supported by SAP use the standard syntax for ON conditions, the syntax has been restricted. It only allows those joins that produce the same results on all of the supported database systems:
Only a table or view may appear to the right of the JOIN operator, not another join expression.
Only AND is possible in the ON condition as a logical operator.
Each comparison in the ON condition must contain a field from the right-hand table.
If an outer join occurs in the FROM clause, all the ON conditions must contain at least one "real" JOIN condition (a condition that contains a field from tabref1 amd a field from tabref2.
Note
In some cases, '*' may be specified in the SELECT clause, and an internal table or work area is entered into the INTO clause (instead of a list of fields). If so, the fields are written to the target area from left to right in the order in which the tables appear in the FROM clause, according to the structure of each table work area. There can then be gaps between table work areas if you use an Alignment Request. For this reason, you should define the target work area with reference to the types of the database tables, not simply by counting the total number of fields. For an example, see below:
Variant 3
... FROM tabref1 LEFT [OUTER] JOIN tabref2 ON cond
Effect
Selects the data from the transparent database tables and/or views specified in tabref1 and tabref2. tabref1 und tabref2 both have either the same form as in variant 1 or are themselves join expressions. The keyword OUTER can be omitted. The database tables or views specified in tabref1 and tabref2 must be recognized by the ABAP-Dictionary.
In order to determine the result of a SELECT command where the FROM clause contains a left outer join, the database system creates a temporary table containing the lines that meet the ON condition. The remaining fields from the left-hand table (tabref1) are then added to this table, and their corresponding fields from the right-hand table are filled with ZERO values. The system then applies the WHERE condition to the table.
Left outer join between table 1 and table 2 where column D in both tables set the join condition:
Table 1 Table 2
A
B
C
D
D
E
F
G
H
a1
b1
c1
1
1
e1
f1
g1
h1
a2
b2
c2
1
3
e2
f2
g2
h2
a3
b3
c3
2
4
e3
f3
g3
h3
a4
b4
c4
3
|--|||--|
Left Outer Join
A
B
C
D
D
E
F
G
H
a1
b1
c1
1
1
e1
f1
g1
h1
a2
b2
c2
1
1
e1
f1
g1
h1
a3
b3
c3
2
NULL
NULL
NULL
NULL
NULL
a4
b4
c4
3
3
e2
f2
g2
h2
|--||||||||--|
Example
Output a list of all custimers with their bookings for October 15th, 2001:
DATA: CUSTOMER TYPE SCUSTOM,
BOOKING TYPE SBOOK.
SELECT SCUSTOMNAME SCUSTOMPOSTCODE SCUSTOM~CITY
SBOOKFLDATE SBOOKCARRID SBOOKCONNID SBOOKBOOKID
INTO (CUSTOMER-NAME, CUSTOMER-POSTCODE, CUSTOMER-CITY,
BOOKING-FLDATE, BOOKING-CARRID, BOOKING-CONNID,
BOOKING-BOOKID)
FROM SCUSTOM LEFT OUTER JOIN SBOOK
ON SCUSTOMID = SBOOKCUSTOMID AND
SBOOK~FLDATE = '20011015'
ORDER BY SCUSTOMNAME SBOOKFLDATE.
WRITE: / CUSTOMER-NAME, CUSTOMER-POSTCODE, CUSTOMER-CITY,
BOOKING-FLDATE, BOOKING-CARRID, BOOKING-CONNID,
BOOKING-BOOKID.
ENDSELECT.
If there are columns with the same name in both tables, you must distinguish between them by prefixing the field descriptor with the table name or using an alias.
Note
For the resulting set of a SELECT command with a left outer join in the FROM clause, it is generally of crucial importance whether a logical condition is in the ON or WHERE condition. Since not all of the database systems supported by SAP themselves support the standard syntax and semantics of the left outer join, the syntax has been restricted to those cases that return the same solution in all database systems:
Only a table or view may come after the JOIN operator, not another join statement.
The only logical operator allowed in the ON condition is AND.
Each comparison in the ON condition must contain a field from the right-hand table.
Comparisons in the WHERE condition must not contain a field from the right-hand table.
The ON condition must contain at least one "real" JOIN condition (a condition in which a field from tabref1 as well as from tabref2 occurs).
Note
In some cases, '*' may be specivied as the field list in the SELECT clause, and an internal table or work area is entered in the INTO clause (instead of a list of fields). If so, the fields are written to the target area from left to right in the order in which the tables appear in the llen in der FROM clause, according to the structure of each table work area. There can be gaps between the table work areas if you use an Alignment Request. For this reason, you should define the target work area with reference to the types of the database tables, as in the following example (not simply by counting the total number of fields).
Example
Example of a JOIN with more than two tables: Select all flights from Frankfurt to New York between September 10th and 20th, 2001 where there are available places, and display the name of the airline.
DATA: BEGIN OF WA,
FLIGHT TYPE SFLIGHT,
PFLI TYPE SPFLI,
CARR TYPE SCARR,
END OF WA.
SELECT * INTO WA
FROM ( SFLIGHT AS F INNER JOIN SPFLI AS P
ON FCARRID = PCARRID AND
FCONNID = PCONNID )
INNER JOIN SCARR AS C
ON FCARRID = CCARRID
WHERE P~CITYFROM = 'FRANKFURT'
AND P~CITYTO = 'NEW YORK'
AND F~FLDATE BETWEEN '20010910' AND '20010920'
AND FSEATSOCC < FSEATSMAX.
WRITE: / WA-CARR-CARRNAME, WA-FLIGHT-FLDATE, WA-FLIGHT-CARRID,
WA-FLIGHT-CONNID.
ENDSELECT.
And for all entries,
this will help u.
use of FOR ALL ENTRIES:
1. INNER JOIN
DBTAB1 <----
> DBTAB2
It is used to JOIN two DATABASE tables
having some COMMON fields.
2. Whereas
For All Entries,
DBTAB1 <----
> ITAB1
is not at all related to two DATABASE tables.
It is related to INTERNAL table.
3. If we want to fetch data
from some DBTABLE1
but we want to fetch
for only some records
which are contained in some internal table,
then we use for alll entries.
1. simple example of for all entries.
2. NOTE THAT
In for all entries,
it is NOT necessary to use TWO DBTABLES.
(as against JOIN)
3. use this program (just copy paste)
it will fetch data
from T001
FOR ONLY TWO COMPANIES (as mentioned in itab)
4
REPORT abc.
DATA : BEGIN OF itab OCCURS 0,
bukrs LIKE t001-bukrs,
END OF itab.
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
itab-bukrs = '1000'.
APPEND itab.
itab-bukrs = '1100'.
APPEND itab.
SELECT * FROM t001
INTO TABLE t001
FOR ALL ENTRIES IN itab
WHERE bukrs = itab-bukrs.
LOOP AT t001.
WRITE :/ t001-bukrs.
ENDLOOP.
cheers,
Hema.

What are the needed tools for JDBC???

iam new to this field, i want to know what are the required tools for JDBC??
i know that i need java.sql and javax.sql packages, but how can i get them???
what about the drivers???
thnx in advance

You need to go to the vendor's web site such as Oracle and download the jar file for that particular database. Example: ojdbc14.jar for an oracle database and copy it to the 'lib' folder of your project and then include it with your project. Within that jar file, you will have datasource, preparedStatement, resultSet objects. You will need to read up on how to instansiate the datasource for that database from the vendor's documentation.

What are the ideal settings for my TC with Shaw's Cisco DPC3825 router/modem

My old 2nd Gen Time Capsule crapped out and now I am about to set up my new 2TB TC. My provider is Shaw Communications and they have upgraded me to their Broadband 100 Mbps service. This came with a new modem/router combo made by Cisco and is model DPC3825. Before I start plugging things in I'd like to know what are the ideal settings such that I gain the most of the BB100 service. Should I be setting the Cisco modem/router to Bridge mode or the TC? Should I have Shaw disable anything? Any insight is greatly appreciated.

Unless you specifically need to have the TC perform as the main router for your network, life will be a lot easier if you configure the TC to operate in Bridge Mode.
Whether the Cisco modem/router or gateway can possibly be configured to act as a simple bridge mode modem is one thing to consider.
Whether Shaw would support you in the event of any connection difficulties with the modem/router configured this way is another.
Since Shaw is your provider, it might make sense to talk with them about best practice as far as configuring the DPC3825.
Once you have that information in hand, you will then have the answer on how best to configure the TC.....which will very likely be in Bridge Mode.

What is the recommended way for persisting JMS messages?

What is the recommended way for persisting JMS messages?. As per the IMQ admin documentation , using the default built-in persistence type which is through unix flat files is much efficient and faster, compared to the database persistence .
Tried setting up the jdbc stuff for database persistence on iAS 6.5 . I am getting the following
error .
[24/Apr/2002:16:09:20 PDT] [B1060]: Loading persistent data...
[24/Apr/2002:16:09:21 PDT] Using plugged in persistent store: database connection
url=jdbc:oracle:thin:@dbatool.mygazoo.com:1521:qa1 brokerid=ias01
[24/Apr/2002:16:09:23 PDT] [B1039]: Broker "jmqbroker" ready.
[24/Apr/2002:16:11:56 PDT] ERROR [B4012]: Failed to persist interest
SystemManager%3ASystemManagerEngine%2BiMQ+Destination%0AgetName%28%29%3A%09%09SM_Response%0AClass%3A%09%09%09com.sun.messaging.Topic%0AgetVERSION%28%29%3A%09%092.0%0AisReadonly%28%29%3A%09%09false%0AgetProperties%28%29%3A%09%7BJMQDestinationName%3DSM_Response%2C+JMQDestinationDescription%3DA+Description+for+the+Destination+Object%7D:
java.sql.SQLException: ORA-01401: inserted value too large for column
[24/Apr/2002:16:11:56 PDT] WARNING [B2009]: Creation of consumer SM_Response to destination 1
failed:com.sun.messaging.jmq.jmsserver.util.BrokerException: Failed to persist interest
SystemManager%3ASystemManagerEngine%2BiMQ+Destination%0AgetName%28%29%3A%09%09SM_Response%0AClass%3A%09%09%09com.sun.messaging.Topic%0AgetVERSION%28%29%3A%09%092.0%0AisReadonly%28%29%3A%09%09false%0AgetProperties%28%29%3A%09%7BJMQDestinationName%3DSM_Response%2C+JMQDestinationDescription%3DA+Description+for+the+Destination+Object%7D:
java.sql.SQLException: ORA-01401: inserted value too large for column
Any thoughts?

From the output, you are using imq 2.0. In that release
the key used to persist a durable subscriber in the database
table has a limit of 100 characters. The output shows that
your value is:
SystemManager%3ASystemManagerEngine%2BiMQ+Destination%0AgetName%28%29%3A%09%09SM_Res
ponse%0AClass%3A%09%09%09com.sun.messaging.Topic%0AgetVERSION%28%29%3A%09%092.0%0Ais
Readonly%28%29%3A%09%09false%0AgetProperties%28%29%3A%09%7BJMQDestinationName%3DSM_R
esponse%2C+JMQDestinationDescription%3DA+Description+for+the+Destination+Object%7D:
which is much longer than 100 characters.
You might want to shorten the string you use for the
durable name.
And yes, the default file-based persistence store is
more efficient when compared to the plugged-in persistence
through a database.

What are the best approaches for mapping re-start in OWB?

What are the best approaches for mapping re-start in OWB?
We are using OWB repository 10.2.0.1.0 and OWB client 10.2.0.1.31. The Oracle version is 10 G (10.2.0.3.0). OWB is installed on Linux.
We have number of mappings. We built process flows for mappings as well.
I like to know, what are the best approches to incorportate re-start options in our process. ie a failure of mapping in process flow.
How do we re-cycle failed rows?
Are there any builtin features/best approaches in OWB to implement the above?
Does runtime audit tables help us to build re-start process?
If not, do we need to maintain our own tables (custom) to maintain such data?
How did our forum members handled above situations?
Any idea ?
Thanks in advance.
RI

Hi RI,
How many mappings (range) do you have in a process flows?Several hundreds (100-300 mappings).
If we have three mappings (eg m1, m2, m3) in process flow. What will happen if m2 fails?Suppose mappings connected sequentially (m1 -> m2 -> m3). When m2 fails then processflow is suspended (transition to m3 will not be performed). You should obviate cause of error (modify mapping and redeploy, correct data, etc) and then repeat m2 mapping execution from Workflow monitor - open diagram with processflow, select mapping m2 and click button Expedite, choose option Repeat.
In re-start, will it run m1 again and m2 son on, or will it re-start at row1 of m2?You can specify restart point. "at row1 of m2" - I don't understand what you mean (all mappings run in Set based mode, so in case of error all table updates will rollback,
but there are several exception - for example multiple target tables in mapping without corelated commit, or error in post-mapping - you must carefully analyze results of error).
What will happen if m3 fails?Process is suspended and you can restart execution from m3.
By having without failover and with max.number of errors=0, you achieve re-cycle failed rows to zero (0).This settings guarantee existence only two return result of mapping - SUCCSES or ERROR.
What is the impact, if we have large volume of data?In my opinion for large volume Set based mode is the prefered processing mode of data processing.
With this mode you have full range enterprise features of Oracle database - parallel query, parallel DML, nologging, etc.
Oleg

A simple query in My SQL what is the similer query for that in Oracle ???

Similar Messages

Maybe you are looking for