A simple question about Project

Hello to everyone.
I have too much picture in my Aperture library, and some of this picture are also in some project.
Now i want delete this project for differene requirements, but obviously if i delete project,
Aperture will delete all picture locate in library.
This is a very big problem...
I think can i export ma Project, delete it, and then reimporting image one by one, but in this case i will lost all adjustment, it's right?
Anyone can help me?
Many many thanks.
michele.

Michele,
Don't worry about your English; it is better than my Italian.
You have your organization backwards - "Projects" should be the smallest oganizational element, not the largest. In any case, no Project should hold more than 10,000 images.
It is probably easiest if you think of Projects the way you would think of rolls of film, cards from your camera, or each day's photos. You can place these Projects inside of Folders which might be months, or years. Projects are the ONLY element that can actually contain images.
In my particutlar case I use the following:
Folders: Europe, Africa, North America, etc.
Inside of these, Folders: UK, France, etc.
Inside of these, Projects: London, Stonehenge, etc.
Most of my Projects contain fewer than 100 images.
To fix your problem, I would suggest that you create new, empty Projects that correspond to each day's shooting, or each trip you have taken, or some, similar event. Now move the images from your one big Project to the various smaller projects.
Finally, you can group those Projects under Folders as needed.
Albums are used to reference images, so they are useful for grouping all images of family members, cars, friends, regardless of where or when the original image was taken.
I hope this is helpful.
-- DiploStrat

Similar Messages

Simple question about mount and delay script

Hello, I have a simple question about mounting volumes on start up.
My computer wakes up auto - and then auto there are serveral applescript tasks (mount and start up programs)
I use this script (daily) for serveral connections with external volumes I always need the connect to. ( In the script I use this code 3 times for other locations) I do this on start up.
set Uname to "XXX"
set Pword to "XXX"
set someVolume to "afp://XXX.XXX.XXX.XXX/XXX/XXX
mount volume someVolume as user name Uname with password Pword
(same code for 2 other locations)
When i do this on start up sometimes the script says there is no connection possible. I guess it's because on start up the connection isn't there. And 1 minute later when computer is total ready the connection is ok. When I run the script then It works. Just sometimes ( In the morning) 'It' want to connect but the script stops. When i do it manually(I run the script again) it works just fine.
Is it possible that I need a delay? Can someone explain this?
How would I make a delay handler for this script? Is that the best solution?
Thanks in advance. This is something small i'm wondering about.
Colin

BTW, If you saved the script as an application +(and not as an application bundle)+ you could drop the script on to *Drop Script Backgrounder* (freeware).
Then the script would run in the background, so, you wouldn't see it running in the Finder.
<http://www.macupdate.com/info.php/id/7922/drop-script-backgrounder-x>
Tom

A simple question about combo box

Dear All,
Just got a simple question about combo box: I have one of these selectors with labels based on filtered rows from a table.
Is it possible to have one more label that would select all options?
Like:
Product A
Product B
Product C
All Product
Many thanks for your help!
Gilles

Hi Gilles,
The purpose of ComboBox itself to select single option out of many.
For your purpose, you may have to use "List Builder" which can accomodate 1 or more to select.
Please revert for more clarification if you need.
With best wishes
BaaRaa.

A simple question about performance!

Hi! I have a simple question about performance. Suppouse that you have a servlet or a class with DB access, and you need to use a value several times in that page. What is best, to assign the value from say, a resultset or a request.getParameter() to a variable or to call the resultset or the request every time you need to retrieve that value? Which option uses less memory, which is faster, etc.?
Hoping the best fou u
Raul

If you need more values from a db, the best is to open some connections (connection pool) and use the for accessing the db.
To get the data only once, open the connection, get the data, store the data whereever you want: variable (class), hidden control (if you want to send from one page to another by request) and close the connection as quicky as possible.
The advantage of the first method is that the most time consuming activity (connections opening) is done only once.

Simple question about flex and AS 3.0

Hi, this might sound like a simple question so I apologize...
I have both a copy of flex 2 and 3, and i want to simply code in AS
3.0 not mxml. I referred to the help of both flex 2 and 3, and all
i could come up with is "you can add dynamic behavior to your
documents using actionscript", which means to me, you only write
your functions in AS and create instances with mxml (...ugh).
personally, i find mxml to be ugly (mainly because it looks like
html to me), and i'd rather not use it. coming from programming in
an IDE in Java, it seems like it would be nicer to have something
similar, all the while having the power and cool features of flash.
I'm not fully educated in this matter so i understand that i could
be totally wrong.
i mean, if i have to code in mxml, i will. i'm a web
programmer for a living, and if a more experience programmer said
something like "if you don't code mxml in flex, you'll never get a
job coding in flex", i would trust the advice, and learn the ugly
code. :)
yes, i do have Flash cs3, it's great but it seems like a pain
to me the way you organize classes.... i've only seen a few
tutorials, ones that explain how you cannot simply import a custom
class, you have tell your movie to link to it, put it in the same
directory, or manually name the package, it's sort of confusing.
my main point here is that i'm very eager to start building
apps in straight AS 3.0 instead of using flash cs3 (for some
projects), and it would be cool to get some help or be pointed in
the right direction.
to simplify:
can i write AS 3.0 and only as 3.0 in flex 2 or 3? how? can
you link me to a tutorial? any advise?
thanks!

Hey William, thanks for the post. It's a great coincidence
because I'm reading that book as well. I'm about half way through
it, and I love it. I installed mxmlc on my linux box and am writing
pure AS 3 apps. I think that's the way to go, though I know it's
not for everybody.
My problem with mxml is that it has a weird syntax for
function calls, and it's not as 'intuitive' for a person like me,
who came from C++ and Java programming in the past. I like writing
programs in the C++ and Java style syntax, and since so many other
languages use a similar syntax, I don't see any reason to learn the
nuances of mxml, unless I was getting paid to do it. As far as I
can tell there is no benefit.
I hate using Flash to write flash apps as well, I feel like
they become messy and confusing, especially when trying to write an
OOP application. I only use it if I want to move an object in a
very specific way and can't do it with the Tween methods.

Simple question about telnet and characters

Hi all,
We've installed for the first time a SUN machine. So i think it's for a SUN expert a very simple question.
Normally when i type a special character it will be dispayed like " � " [alt+132]
But when i use a telnet session and i type "alt+132" i get a "d" and not "�".
Does someone know where i must start to find out how this works ?
Thanks you very much.
ESP

This is probably related to the locale your server is in. I don't remember the default locale a box is installed in if you don't specify. I think its "C". I use the UTF-8 or en_US.ISO8859-1 locales at home. At work, usually C but sometimes applications may require UTF-8. BEA Weblogic required this for a project a while back. This is defined in /etc/init/tz.

Getting Started with CFBuilder - A Question About Project Settings

Hello All,
I'm just getting my feet wet with CFBuilder and giving it a spin after over a decade's worth of experience with Dreamweaver and I have a question about setting up my work environment.
First of all, I have two computers that I mainly work from. My home desktop computer, and a laptop for when I'm on the road. I keep all of my web site project files syncronized between the two computers using Dropbox.
I've noticed that when I create a new project in CFBuilder it stores a few files in my project root like ".project" and "settings.xml". It looks like "settings.xml" stores information about which CFBuilder web server should be used for the project. Unfortunately this messes things up for me a bit because on my desktop a web site project url might be: http://desktop/myProject/ and on my laptop the project url could be http://laptop/myProject.
The reason this isn't a problem in Dreamweaver is because dreamwevaer stores its configuration/preferences outside of my project folders so I can essentially define any testing server I want for both the desktop and laptop.
Is there a way to configure CFBuilder to store project settings outside of the project folder? Or does anyone have a suggestion for someone like me who syncronizes their project files from their laptop to their desktop?
Thanks in advance for helping out a CFBuilder noob.

I would recommend using a distributed version control system (DVCS) with a hosted service, such as using Git/Mercurial and Github/BitBucket/UnFuddle. With Git, you can use a .ignore file to specify files/folders that you want to exclude from being stored in version control (I also exclude my CFBuilder project files from my repositories). You would then sync your local Git repositories with your service of choice, and they would be accessible from any machine.
There are many advantages of using Git and a hosted service over just Dropbox:
Each computer has a complete copy of the code repository, including all code changes over the history of your project.
You store code modifications in "commits", or small entries in the DVCS.
Commits can contain user-defined descriptions that help you identify what you did at each step of your development process
You can roll back commits if you break something in your code.
You can create "branches" of your code when you want to work on a specific feature of your application, and that branch is kept in isolation from other branches until you are ready to merge it back into the main production code branch.
You can have public or private hosted repositories on the various services, enabling you to work with a team or participate in open-source development.
There are Eclipse plugins available for CFBuilder that provide GUI tools for working with Git and hosted repositories (unless you are comfortable with using the command-line to do all your Git interactions).
I don't think you can separate the project settings from the project in CFBuilder.

Question about Project Lockdown

I've been reading through Arup Nanda's "Project Lockdown". I understand all of his rationals and procedures, but a few things leave me feeling a bit uneasy. Maybe it's just fear of the "unknown unknowns". In particular is the discussion on changing the unix access profiles for the oracle binaries. I have this uneasy feeling that if I were to implement those particular suggestions, it would end up biting me somewhere down the road.
Has anyone implemented all of the suggestions in this document? If so, what have been your experiences?

Arup Nanda_2 wrote:
Hi Ed,
Thanks Mark for pointing me out to this.
I have been using that for more than 8 or 9 years now, without any side effects. But as Emre Baransel reported that although he has been following that without any untoward effects, you should take every advise in the specific context of your environment. I have tried to put all caveats there; but there is no way for me to check all possible comobinations.
For instance, one of the advises is to remove executable permissions from extjob executable. If you are not using extrnal jobs from the database (99% of people don't), heeding that advise does nothing to your activities. But if you do external jobs, they are broken now. I have made that clear in the article; but I can't be sure if the reader will pay attention to that. But if you don't use external jobs, by changing the permissions you just closed a major vulnerability without applying the CPU patch, which may or may not close all the vulnerabilities.
Another is the case of nmb and nmo executables. If you are using Enterprise Manager to manage the O/S as well, then changing those executables will no longer allow you to do that. But if you don't do that particular activity (most don't), you again closed a major vulnerabillity without affecting your functionality.
For anyone who has ever authored anything, one thing is clear - the work is like broadcast, not point to point transmission. Even point-to-point. "If you explain something so clearly that no one can misunderstand, someone will".
It's not consulting which is situation specific. So, any work which is not prepared in context of a specific situation must be taken with that disclaimer - your mileage may vary. Understanding and testing is a must before committing the work.
Hope this helps.
ArupThanks for the response. Besides worrying about the "unknown unknowns" I also have a question about applying patches, especially the quarterly CPUs. Since, at some level, applying a patch is simply overlaying a specific file with a newer version, will this cause permissions to revert to default? Would we have to go through the process after applying a patch? I'll go back and re-read the original doc several more times to make sure I have a good grasp of what's going on here.

A simple Question about % in CR Chart!

Hi, I have another simple question.
When i use SQL to storage data and wanna Crystal Report to display the data in chart using %
which data type should i use?
float or string?
and I found when i use 0.12 as 12% in database , It could not display in Crystal Report line chart normally.
What should I do??
Please Help!!!
Thank you VERY MUCH!!!

If you have the datatype as string from your database then try adding the string field as a summary field in chart and select maximum instead of count and if you have them in number format then you can directly select the percentage in chart.
Regards,
Raghavendra

Simple question about generate proxy

Hi guys...
This is a simple but a truly simple question....
When trying to create a proxy from our messages interfaces using SPROXY, i'm not able to get the Software component versions that were used from the sld...
Do I have to export them? Or import them?

Hi Goncalo,
Check if it helps...
Re: SW component version not visible in SPROXY
Regards
Anand

Simple question about JAVA path

Hi. I have a simple question , but I spent several hours trying to find an answer.
How do I know the location of the java executable which is used by Concurrent Manager.
I already know that running which java under application user will not give me the correct answer

Maybe you can try like this:
     public String getPath(){
          Class cls=getClass();
          String className=cls.getName();
          String packageName=cls.getPackage().getName();
          System.out.println(className);
          System.out.println(packageName);
          String newClassName=className.replaceAll("\\.", "/");
          String resouceName=newClassName+".class";
          System.out.println(resouceName);
          URL url;
          url=cls.getClassLoader().getResource(resouceName);
          String path="";
          path=url.getFile();
          return path;
     }

A very simple question about WF

hi experts
I would like to ask a question about workflow
as u may know there is 'Loop' step in workflow, but I am confused when should I use Loop?
Is this step used for processing internal table? if yes, why shouldn't I create a custom BOR method and pass the entire internal table to the method?
many thanks

hi
loop step for not process the internal table,
this is used to process the some steps repetely until condition True or False.
we have two loop steps is there
WHILE AND UNTIL.
Thanks
sitaram

Maybe a simple question about M2T ?

Hi
I record in HDV on the JVC GY 101.
I store on the Focus Enhancements DR HD100 Hard disk recorder.
The footage I have is in HDV 25frames Progressive.
The hard disk stores as m2t file and I seem to need to use Mpeg streamclip to convert for Final Cut Pro HD.
I have a few questions about this.
1) What should i convert to with mpeg streamclip ? mov, dv m2v etc etc
2) What setting should I have on FCP with regards to screen size ? The converted clips are 1280x720. When I choose this setting on the sequence, I end up with small black bars left and right of the video on the canvas ???
3) I will also later have to add some digi beta footage which will be PAL, 720x576 Anamorphic.
4) What is the best resolution for me here ?
5) And will the quality of the original m2t file be downgraded by the mpeg streamclip ?
Thanks so much for your help
All the best
Simon

HDV isn't an "edit-friendly" format, meaning: HDV uses inter-frame compression, combined with a long group-of-pictures (GOP) of 15 frames (12 frames in PAL-equivalent). In intra-frame compression (as in DV, DVCPRO HD, etc.), each video frame is a complete image that stands alone. Inter-frame compression (which is also used in DVDs) uses only a limited number of complete image frames, the GOP determines that number. So, in HDV for example, with a GOP of 15 frames, 1 second of 30fps video contains only 2 complete frames, while the other 28 frames are determined by calculations used in conjunction with the Bi-directional ('B') and Predicted ('P') frames, which contain partial information on the changes in the video in between the 'I' frames which contain whole images. This process, of course, requires much more computer processing power than when editing DV, DVCPRO HD, Uncompressed, etc.
Editing video streams such as HDV (and XDCAM HD) is made difficult by the reduced number of I-frames. For example, if you make a cut in between the I-frames in the video clip, the computer has to then recalculate new I-frames that are placed at both sides of the cut. Converting on capture/after import to an intra-frame codec like DVCPRO HD, ProRes 422, or Uncompressed will reduce processing power and increase real-time performance, as well as give better performance when adding effects and performing compositing like chroma-keying.
A common rule of thumb in professional applications is to acquire in HDV, XDCAM HD, etc., but capture and edit in DVCPRO HD, ProRes 422, or even Uncompressed. Native HDV editing is not taboo by any means; it's just not as easy or robust -- especially with the LONG render times. Depending on what kind of work you do (and of course personal preference), you may not see much benefit by transcoding to another format.
Are you suggesting i have to convert each clip after capture?
Unless you have an HDV deck with HD-SDI and a capture card, you would have to convert each clip. Batch-conversion would be very useful for that.
Hope that helps.
tim

A simple question about DAQ data sampling

Hi all:
Now I meet a very basic question about DAQ sampling. I am using NI PCI-6040E DAQ card, SCXI-1001 chasis, SCXI-1102, SCXI1300 terminal block, and SCXI1160 relay module.
I am not sure , is it possible if I want to test a voltage (1 volt) on a resistor. Now I am connecting the Ch0+ to resistor+ (24 volt), and connecting Ch0- to resistor-(23 volt). So the voltage between resistor+ and resistor- should be 1volt. Actually, It is working at the first, but after I want to test 9 channels based on this connection. The Measurement & Automation can't read data from the DAQ card. (when I test it by multimeter, I can get the voltage data on the Ch0+ and Ch0- of SCXI1300 terminal block).
That's strange, does anybody know what' s wrong about it?/
Thanks a lot

Hi hanwei,
According to the specifications of the PCI 6040E (page 3), the input signal and common mode voltage should never exceed 11V from ground. I believe this is the reason you are able to measure the potential of a battery but not the 24V signal (even though the differential value is only 1V).
Best Regards
Hani R.
Applications Engineer
National Instruments

Just simple question about java HTTP session mechanism...

I have one simple question regarding the java HTTP Session Mechanism.
1) Is there another alternative for the HTTP Session ? If have, what the alternative?
2) I have been acknowledge that HTTP session is same as cookie system and others say have many different, where is the different..
thanks

1) You can always do your own session handling. But why bother when there is one there for you?
2) The issue with sessions is how to identify the user from the request. Each session gets given a session id. The user has to send that session id with every request they make.
The standard way is to use a session cookie, which only lasts as long as the browser session. The cookie with the JSESSIONID is sent with every request, thus the server can identify which session a user is in from their cookie.
Of course you cannot assume that the browser will support cookies, so you need to encode all URLs with the method response.encodeURL(). That method puts the session id into the URL if the browser does not support cookies, or they have them switched off.

A simple question about Project

Similar Messages

Maybe you are looking for