A simple question... re. Intel CPU and Heasink

this is probably really simple, but i need to be sure so i'll ask anyway
My question is:
Do you remove the thin black sheet of what i pressume is aluminium on the heatsink before installing it onto the CPU?
I applied some Artic Silver on the CPU and left the black aluminium sheet on when installing my Intel Heatsink and CPU.... is this the correct way?
Cheers

Stock heatsink and fan dont remove, dont use thermal paste
After marketheatsink and fan, apply thermal paste
If you must apply thermal paste remove black strip as best u can and then apply rubbing alcohol to remove last traces then apply thermal paste.
If you ever remove heatsink you will probably need to remove black strip and reapply thermal paste

Similar Messages

Why does this site have online chat when you can never actually chat - always "not available"? I was trying to get a simple question answered without calling and being on hold for 10 minutes?

Why does this site have online chat when you can never actually chat - always "not available"? I was trying to get a simple question answered without calling and being on hold for 10 minutes?

Hello flabucki,
Help is just a post away for you my friend! I can help with your questions right here. May I ask what question do you have? Both myself and the community would love to assist in any way that we can.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

Simple question about table structure and HR in BW

i need to following data from HR:
current FTE, employee number, cost place
i dont think the current FTE is stored per employee. Therefor is would need a list that contains:
mutation start date, mutation end date, FTE, employee, cost place
i think cost place is a custom field.
my question : what tables names and field names do i need?
Thanks in advanced

Hi,
For Head Count you can use 0HR_PA_0 datasource and the other Employee details like start date and end date you can get them from employee master data and FTE can be calculated from the Emloyee Master Data and Head count data.
Hope this helps...
Thanks,

Simple question: Physical wireless switch, and booting

This is a question for those who have a laptop with a switch that enables or disables the wireless network: Do you have to manually press this button before you want to establish a wireless connection?
Until kernel 2.6.31 I could start my wireless connection at boot without pressing any button. However, since kernel 2.6.32 I have to physically press the button on my laptop and then issue the command that establishes the connection (I use the net-profiles daemon for this). This means that I cannot establish the connection at boot. Various rfkill options (hard, soft, blocked, unblocked, or blacklisting rfkill) do not change this behavior. I was just wondering whether this is normal, and whether this can be avoided?
I use an old laptop that I do not carry around, and it uses the rt2500pci driver. The BIOS does not have any settings that automatically enable wireless.
Thanks!
Last edited by anadyr (2012-04-23 14:28:59)

With OSX, one can use a USB adapter (DLink and others make compatible adapters). Compatible PCI cards are also available. Both will need drivers; some PCI cards will work with the drivers imbedded in the OS. Typically, the required drivers will come packaged with the card or can be downloaded.
The third option, and I think the best one, is to use an Ethernet Wireless Bridge. These communicate via the Mac's ethernet port and configure with a browser, so they are platform independent; no drivers are required. I use a DLink DWL G-820, but other vendors make them as well. Setup of the bridge adapters is a bit more difficult, but not terribly so.

Simple question involving data signing and encryption

What is exactly mean by signing and encrypting data?
And how would it apply to the case of a web browser..where I have to sign and encrypt data to and from a web browser? In this case it is an output and input stream.
Does every byte have to be signed or just the starting bytes? Singing every byte would make the process slow and inefficient

I know if you you sign and encrypt the data to the
web browser, it will obviously not be recognized but
this is my scenario:Your ASCII art didn't come across at all, I'm afraid - I'm not sure what you were going for, but I can't seem to recreate it. I think I can follow the explanation, though.
P is the program i am developing. It is supposed to
encrypt and sign data to and from the web browser.
P1 get the web browser request, encrypts the data
a and is supposed to sign the data...send it
to P2 which decrypts and verifies the signing which
then forwards it to the proxy or the server as seen.
Vice versa from the server response.So you're working on a web-proxy that encrypts it's transmissions, and you want to add signature verification as well.
My question still remains...how do you sign a stream?I answered your question, actually. You don't sign "streams" - you sign "messages". In your case, you sign the entire transmission, and then you transmit it.
Right now I am using RSA keys to send a symmetric key
across safely for the decryption etc I have the
encryption/decryption process covered and the browser
works..but i didn't do signing of any sort...how to
implement this..for every byte? Is signing necessary?Given your requirements, I have to ask - why are you re-creating SSL? If you have P1 and P2 talk SSL to each other, you get everything you've described here, including signing. I don't understand why you feel the need to recreate an existing protocol.
Grant

A simple question regarding c:out and ADF

I have a small problem which I can't figure out :-(
The solution is probably dead easy, but I don't see it ..
The problem is :
I have a jsp-file which have the following tags :
<c:out value="${bindings.EstimatedInterest}" />
<c:out value="${bindings.RemainingAmount}" />
And I want to have one more field which just adds these two together.
But I get this error :
Attempt to coerce a value of type "oracle.jbo.uicli.binding.JUCtrlAttrsBinding" to type "java.lang.Long" (null)
Can anyone pls point me in the right direction ?
With regards, TA

This may help. I asked Muench what I think is about the same question:
http://radio.weblogs.com/0118231/2004/04/28.html
in general:
<c:out value="${(bindings.Returned.inputValue.value / bindings.Total.inputValue.value) * 100}"/>
(this may not be the same as your question but will point you in a direction)

Please help, simple question about Smart Playlists and Live Updating

PLEASE for some reason I've never gotten an answer on this.
I have a Smart Playlist called "Recently Played" with Live Updating. No matter how I set the parameters, the most recently played *song will ALWAYS appear on the bottom of the list when using my iPhone on the go.* I bolded that because I want you to be aware I'm not talking about on iTunes - I'm aware you can change how the list is viewed on iTunes.
When using your iPod/iPhone on the fly and Live Updating is enabled, is there any way to make the most recently played song appear at the very top???
Thanks so much

Haven't seen that problem before but try the following: in iTunes, right-click the playlist name and enable the option "Copy to Play Order." Then sync.
The normal use of "Copy to Play Order" when you have the playlist displayed in iTunes in some sort order, but you want it to display in the iPod in shuffled order (as it will actually play). Different problem than you are observing, but the same thing "might" help.... Let us know.

Simple question on C pointers and Strings

I get a bus error dereferencing a pointer to a string.
I am trting to change the first character of a string. I have an example of the code below. If I print *s as a character (%c) I get 'T', I am simply trying to change the character 'T' to 'X'.
#include <stdio.h>
main () {
char *s = "Test";
*s='X';
printf("s: %s\n", s);
What is wrong here?
Thanks,
Erik

Steve - thanks for the explanation - which led me to go back and re-read K&R and on page 104 in section 5.5 (2nd ed) I see that I was only declaring a string constant. The book (K&R) is a tough read, there are a lot of subtle points in the text .
Your explaination was simply great - very clear.
On another point, in 'Practical C' the O'Reilly book by Steve Oualline, he gave an example similar to the one that I did. But I could not get it to work. I found that both statments failed. On page 191 (3rd ed) he shows:
char *const name_ptr = "Test";
name_ptr = "New"; /* Illegal (name_ptr is constant) */
*name_ptr = 'B'; /* Legal (*name_ptr is a char) */
Seeing this and some other code snipets in other books I came to the understanding that individual characters could be changed in a string simply by dereferencing the pointer at the appropriate point in the string and then assigning the new character that I wanted. By appropriate point I mean treating a pointer like an array *name_ptr++ for example.
Thanks to your explanation and running a number of code examples, I realize that what I missed or the books failed to show, is that before changing a string pointer (if declared as a 'string constant') that you need to first create an array of memory and then assign that array to a char *, before attempting to change any character in the string.
Again thanks to you and to all that replied. Every reply was helpful.
Erik

Simple question on aligning video and audio

I am new to this and am using the Cs4 trial. I have placed a video in video 1 timeline and it has audio that appears in the audio one line. Now I have also inserted a plain audio file from the sound board of the same event into audio track two. I would like to align them so I magnified them and can see the exact start time of the audio in the waveform. The problem is I can not align the two. If I slide either one back and forth they just jump to a frame marker. Like I said I am new at this. I can understand that the video can only move on frame or one key frame at a time? But shouldn't the audio just slide with out jumping? I hit a button that said snapping but that didn't change anything.
Also how do you align two videos? If I have two videos of the same performance It would seem that I have to align them together to then use the multicamera mode? I tried the razor tool but that only seems to cut on a frame. Doug

You can set the timecode display to "Audio Time Units" which gives you much more finite control when positioning or trimming audio tracks. Click the fly-out menu in the Timeline panel or Program Monitor to find it:
Note that video can only be positioned or trimmed to whole frames; how precise you get is dicatated by the timebase of your sequence. For example, in a 24p sequence, you only have 24 subdivisions of a second; in a 60p sequence, you have 60 subdivisions. Likewise, the razor tool/command is bound to frames, at least when slicing video.

Simple question about iPhone backups and password

I can't remember the password to my iPhone-backup in iTunes. But, phew, I haven't lost any data, as I have my iPhone with all data intact. So I deleted the backup in iTunes, and tried to start a fresh backup with a new password. But alas, that doesn't seem to be possible (it backs up, but doesn't ask for a password, and when trying to uncheck encryption I get asked for a password).
Does this mean iTunes now won't let me back up and retrieve the data I actually have on my very own phone? And does it mean that I now have two options:
a. Keep on using my iPhone, keeping the data on it, but without the ability to backup and retrieve the backups, or
b. restore and set up my iPhone as a new device, losing all my data

If you update you will not be able to go back to a previous iOS version. The iOS is not included in the backup. The following link gives details of what is included: iTunes: About iOS backups

A simple question about c:out and the ADF bindings

I have a small problem which I can't figure out :-(
The solution is probably dead easy, but I don't see it ..
The problem is :
I have a jsp-file which have the following tags :
<c:out value="${bindings.EstimatedInterest}" />
<c:out value="${bindings.RemainingAmount}" />
And I want to have one more field which just adds these two together.
But I get this error :
Attempt to coerce a value of type "oracle.jbo.uicli.binding.JUCtrlAttrsBinding" to type "java.lang.Long" (null)
Can anyone pls point me in the right direction ?
With regards, TA

Hi Thor,
try this,
<c:set var="EstimatedInterest" value="${bindings.EstimatedInterest}"/>
<c:set var="RemainingAmount" value="${bindings.RemainingAmount}"/>
<c:out value="${EstimatedInterest+RemainingAmount}" />
oscar

Simple question about af:panelTabbed and required="true"

Hello,
I have a component af:panelTabbed with four tabs:
In the fourth tab i have an af:inputText with the tag required="true"
The problem is: The required is only applied if i am at the fourth tab (where the inputText is on).
If i am at first tab, the form is commited and the required is not applied.
Any help, please ?
Victor Jabur

To complement, here is my jspx and my Managed Bean:
When i click at cb1 button, the focus would have to go for tab4, but the partial refresh doesn't work. If i use the refreshPage() method posted above, the focus works, but as mentioned, it's not web 2.0 common use.
JSPX:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1" title="Test Tab Component">
<af:form id="fm1">
<af:commandButton id="cb1" text="Execution Action" action="#{myBean.executeAction}" partialSubmit="true"/>
<af:panelTabbed id="ptab" styleClass="AFStretchWidth">
<af:showDetailItem id="tab1" text="Tab 1"/>
<af:showDetailItem id="tab2" text="Tab 2"/>
<af:showDetailItem id="tab3" text="Tab 3"/>
<af:showDetailItem id="tab4" text="Tab 4" binding="#{myBean.tab4}" clientComponent="true">
<af:inputText id="it1" label="Input Text" binding="#{myBean.inputText}" clientComponent="true"/>
</af:showDetailItem>
</af:panelTabbed>
</af:form>
</af:document>
</f:view>
</jsp:root>
Managed Bean:
package com.test;
import javax.faces.application.FacesMessage;
import javax.faces.context.FacesContext;
import oracle.adf.view.rich.component.rich.input.RichInputText;
import oracle.adf.view.rich.component.rich.layout.RichShowDetailItem;
import oracle.adf.view.rich.context.AdfFacesContext;
public class MyBean {
private RichInputText inputText = new RichInputText();
private RichShowDetailItem tab4 = new RichShowDetailItem();
public void executeAction(){
if(this.inputText != null){
if (this.tab4 != null) {
FacesContext context = FacesContext.getCurrentInstance();
FacesMessage facesMsg = new FacesMessage(FacesMessage.SEVERITY_ERROR, "Enter a value", "");
context.addMessage(this.inputText.getClientId(context), facesMsg);
this.inputText.setValid(false);
this.tab4.setDisclosed(true);
AdfFacesContext.getCurrentInstance().addPartialTarget(this.inputText);
AdfFacesContext.getCurrentInstance().addPartialTarget(this.tab4);
//AdfFacesContext.getCurrentInstance().partialUpdateNotify(this.inputText);
//AdfFacesContext.getCurrentInstance().partialUpdateNotify(this.tab4);
public void setInputText(RichInputText inputText) {
this.inputText = inputText;
public RichInputText getInputText() {
return inputText;
public void setTab4(RichShowDetailItem tab4) {
this.tab4 = tab4;
public RichShowDetailItem getTab4() {
return tab4;
}

Simple question about environment variables and setting the class path???

ok I have been trying for a few months now ontrying to set the class path..
I work with windows vista..
on the environment variables user variables,
I have the name of the variable as class
and the value as C:\Program Files\Java\jdk1.6.0_04\bin;.
where javac is...
on the system variables I have
its name as class
and the value as C:\Program Files\Java\jdk1.6.0_04\bin;.
why is this not reading javac

The PATH environment variable should have as an entry the directory containing your javac executable. The CLASSPATH should have have entries which define your library directories and entries which are your jar file libraries. In the early days, probably the only CLATHPATH entry you will need will be a '.' to indicate the current directory.
The Java tutorial covers ALL of this.

Simple question about one RAID and 2 XServes

Hey Guys,
I have an old G5 XServe controlling an XServe RAID and want to add another XServe for Final Cut Server.
Is it possible to run one fiber line to one server and the other to the other server?
I'd like a straight shot to the RAID for maximized bandwidth, but maybe it doesn't work that way or wouldn't matter.
Thanks for your expertise.

Is it possible to run one fiber line to one server and the other to the other server?
Yes, this is possible. Each xserve will have access to each half off the xraid. Each xserve can not access the other half! This is due to the design of xraids. Actually the xraids are two sets. Each set has a controller and 7 disks. These two sets are placed in one physical box. There is no data path between the two sets.
If you want to access the same data from 2 machines, this will not work. If you want to have each machine it's own data, you will be comfortable.
Regards
Donald

2.1GHz PowerPC G5 to intel cpu?

Is there anyway to change the 2.1 GHZ PowerPC G5 to an intel CPU?

Clone your hard drive at least twice:
http://www.macmaps.com/backup.html
Read how to sell a Mac*:
http://www.macmaps.com/selling.html
Make sure all your applications support Intel CPU and/or Mac OS X 10.7. If they don't all support Intel CPU, but most do, you'll probably want a used or refurbished Mac* that supports 10.6.8 or earlier as is listed on the bottom of:
https://discussions.apple.com/docs/DOC-2455
If they do all support the Intel CPU and Mac OS X 10.7 as is indicated by my tip below:
https://discussions.apple.com/docs/DOC-2465
Either way, if you are migrating to an Intel Mac, read this tip on migrating data:
https://discussions.apple.com/docs/DOC-2295

A simple question... re. Intel CPU and Heasink

Similar Messages

Maybe you are looking for