A simple script for you, a giant script for me-
I like scripts very much but scripting does not seems to like me! Can anyone help me and write a script for me? What I need is this:
1. Ungroup everything in a spread
2. A loop that goes through every text frame in the spread and, at the end of the text contained in each of those frames inserts a blank paragraph. (The frames contains text and inline graphics)
This may seems strange but is what I need.
Best regards and thank you in advance
Maria
I like scripts very much but scripting does not seems to like me! Can anyone help me and write a script for me? What I need is this:
It's much easier for you to show us what you have and then we'll fix it for you or tell you what is wrong. Then you'll learn something to!
1. Ungroup everything in a spread
This one's easy -- unless you're worried about groups inside groups?
app.activeWindow.activeSpread.groups.everyItem().ungroup()
If it's groups all-the-way-down, on the other hand, well, it might be more than one line...
Similar Messages
-
Which Netbook is right for you? Read here for suggestions.
With the popularity of Netbooks on the rise, its important to pay attention to all the features that you possibly might be getting before purchasing.
Many of them ship with Linux. This configuration is fine for people who are just doing basic internet surfing, managing photos, and doing some webcam chatting. However, these models do not run Windows programs and they are quite limited in storage capacity. Were talking about 3 to 4 gigabytes of storage.
In short, its fine for the basic user. If you are a power user, consider getting the Acer Netbooks with a large capacity drive. They have Windows on them and are suitable for people who demand more features then Linux can offer and you can install lots of programs.
When buying a Netbook with Windows, you really want to purchase an external burner or drive to install programs on it. You might want to buy memory cards and other peripherals as well.
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.Hi,
Does this help ?
http://office.microsoft.com/en-in/lync/meeting-software-compare-lync-plans-FX103842081.aspx
Thanks
Saleesh
If answer is helpful, please hit the green arrow on the left, or mark as answer. Blog : http://blogs.technet.com/b/saleesh_nv/ -
Is Premiere Elements 8 working correctly for you?
Sorry, to beat an old horse but I do not want to end a discussion that has not been resolved.
I would like to keep this open as I think knowing who is having problems and on what type of video would be quite helpful to Adobe support who is looking to help me, they said they would be watching the forums and my posts to see what issues I and others are having to try and resolve them.
I am not able to edit HD videos using Genius G-Shot HD520 camcorder but I am able to edit SD videos using Coby Snapp Cam3000.
I can edit videos from both cameras in Windows Movie Maker and Cyberlink PowerDirector.
When i try to edit videos that are high definition the program does not respond even after leaving it for 1/2 hour or so.
I am also having the program not shut down correctly at times even when editing standard video, parts of the program still are running even though windows does not show it in task manager. A program called Winpatrol still sees it running and the core load shows way too much activity after the program has supposedly stopped, even an hour afterward. This does not happen all the time, only sporadically.
My systems:
amd athlon 64 X2 dual core 5000+ @ 3 Ghz, PNY NVIDIA 9800GTX+ graphics card(driver ver.195.81), gigabyte GA-M57SLI-S4 mobo, 4 GB RAM, Seagate 7200RPM sata drive with 200+ GB freespace, windows vista 32 bit business
intel core2quad q6600 @ 2.4 Ghz, zotac NVIDIA 8800 GT graphics card(driver ver.195.81), ecs P45t-a mobo, 4 GB RAM, Seagate 7200RPM sata drive with 300 GB freespace, windows vista 32 bit premium
Please help me get some useful information gathered for support to lead them in the right direction.
PLEASE, no useless arguments or troubleshooting attempts from those who are not running Adobe Premiere Elements 8.
I would like to get some feedback from users of Adobe Premiere Elements 8, not others.
1. Does Adobe Premiere Elements 8 work for you with standard videos for simple editing?
2. Does PE 8 work with high definition video for simple editing?
3. If you are having problems with PE 8 not working as it should what are they and how are you getting them resolved?
I would like to get real problems that are things that the program should be doing and is not.
Issues like freezing, not importing or exporting video or failing to edit a type of video is what I think support would like to hear about.
Thank you.
Jeff Gedgaud1. Does Adobe Premiere Elements 8 work for you with standard videos for simple editing?
Never. Crashes every single time I have tried to use the program. It crashes at various random times on miniDV video from a Panasonic GS400. Magix, PowerDirector and Widows MM edit this same source material without issue. I have absolutely no interest in spending countless hours on the phone with a guy from India or wherever telling me to uninstall and reinstall the program or do a clean install of Windows, or reading something from a script that obviously has nothing to do with the problem, only to have the phone conversation cut off and it be impossible to reach the same person again, only to have to start over. Here is the latest crash example.
1. Launched PRE8
2. Opened a project from the welcome screen. Project consists of DV-AVI files from a Canon GS400. Project is 23 minutes and 39 seconds in duration.
3. Resized the timeline using the “+” and “-“ clickies.
4. Clicked the Edit tab.
5. Clicked Transitions.
6. Clicked the existing “Stretch In” transition on Video Track 1 and pressed the “Delete” key.
7. Clicked and dragged the “Cross Zoom” transition between the first and second clip on Video Track 1, where the “Stretch In” transition was previously located.
8. Rendered the Timeline by pressing “Enter.”
9. Previewed the video near the newly added “Cross Zoom” transition.
10. Double clicked the transition in the Timeline and scrubbed the duration to approximately 5 and a half seconds.
11. Rendered the Timeline by pressing “Enter.”
12. Previewed the video near the just lengthened “Cross Zoom” transition.
13. Saved the project by pressing the “Save” icon near the top right hand corner of the program.
14. Clicked the “Disk Menus” and selected the “Holiday and Events” drop down.
15. Selected the “Blinking Lights” menu and clicked on “Apply.”
16. Clicked the “Preview” button.
17. Clicked “Play” in the “Preview” window and allowed the video to play for a few seconds and clicked “Pause ||”.
18. “X’ed” out of the “Preview” window and clicked the “Done” button.
19. Clicked the “Edit” tab and clicked “Clip Art.”
20. Scrolled down the “Clip Art” window and clicked and dragged the “Travel Compass” to Video Track 2 at the 56 second mark.
21. Rendered the Timeline by pressing “Enter.”
22. Previewed the video near the just-entered clip art.
23. Moved the Timeline indicator over the Travel Compass clip art in Video Track 2.
24. Right clicked the Travel Compass in the Preview window and changed the Magnification to 25%.
25. Clicked “Undo” 4 times and clicked “Redo” 4 times.
26. Rendered the Timeline by pressing “Enter.”
27. Right clicked the Preview window and changed the Magnification to “Fit.”
28. Previewed the Timeline near the Travel Compass clip art.
29. Selected the “Travel Compass” clip art in Video Track 2 and pressed “Delete.”
30. Went to pick up my daughter and returned 20 minutes later.
31. Rescued the laptop from sleep.
32. Clicked the Effects button.
33. Under “GPU Effects” clicked and dragged the “Ripple (Circular)” effect to the second clip on Video Track 1.
34. Rendered the Timeline by pressing “Enter.”
35. Scrubbed the Timeline to before the video clip with the recently added “Ripple” effect.
36. The program crashed without warning with the following Crash Data.
37.<?xml version="1.0"?>
38.<!DOCTYPE crashreport SYSTEM "AdobeCrashReporter.dtd">
39.<crashreport version="1.1" crVersion="" applicationName="Adobe Premiere Elements" applicationVersion="8. 0. 0. 0" build="unknown">
40.<time year="2009" month="12" day="11" hour="20" minute="53" second="56"/>
41.<user guid="cfdfd962-310b-40bf-8e0a-9914df84cd5a"/>
42.<system platform="windows" osversion="6.0.6002 SP 2.0" applicationlanguage="Language Neutral" userlanguage="en_US" oslanguage="en_US" ram="3065" machine="Intel(R) Core(TM)2 Duo CPU T9550 @ 2.66GHz" model="x86 Family 6 Model 23 Stepping 10" cpuCount="2" cpuFreq="2660 MHz" busFreq="" locale="English (United States)"/>
43.<crash exception="EXCEPTION_ACCESS_VIOLATION" instruction="0x199568ef">
44.<backtrace crashedThread="0">
45.<thread index="0">
46.<stackStatement index="0" address="0x199568ef" symbolname="unknown"/>
47.<stackStatement index="1" address="0x19956995" symbolname="unknown"/>
48.<stackStatement index="2" address="0x196a227e" symbolname="unknown"/>
49.</thread>
50.</backtrace>
51.<registerSet>
52.<register name="EAX" value="0x00000000"/>
53.<register name="EBX" value="0x7cd50080"/>
54.<register name="ECX" value="0x00000016"/>
55.<register name="EDX" value="0x00000000"/>
56.<register name="ESI" value="0x7cd50080"/>
57.<register name="EDI" value="0x00000000"/>
58.<register name="ESP" value="0x1914f154"/>
59.<register name="EBP" value="0x4bb10dc8"/>
60.<register name="EIP" value="0x196a227e"/>
61.<register name="EFL" value="0x00010202"/>
62.</registerSet>
63.<binaryImageSet>
64.</binaryImageSet>
65.</crash>
66.<reproSteps>
67.</reproSteps>
68.</crashreport>
2. Does PE 8 work with high definition video for simple editing?
I have not tried hi def.
3. If you are having problems with PE 8 not working as it should what are they and how are you getting them resolved?
I am not getting them resolved. I am posting to this forum seeking answers. I have gone through all the proper Adobe channels with no results. Check around for multiple threads. I have sent numerous crash reports to Adobe with no response. No one on this forum nor Adobe has been able to provide a solution that actually works. Again, Adobe hasn't even tried.
Everything I have stated in this thread is a fact and my actual experience, not speculation. I too would like the thread to remain open in the hopes of a resolution. Discourse should not be cut short because it goes against Adobe. After all, this is a user to user forum that Adobe does not even monitor right, and we as a user group should seek and demand the truth and solutions without being sensored. I have seen no behavior by anyone in any thread that I have been involved in that should have caused it to be locked. I have seen healthy differences of opinion and a lot of useless informationas it relates to the problem at hand, but no discourse that was hostile or personal attacks that should have caused a lock.
Below are my system specifications.
Thanks
Glenn
Operating System
MS Windows Vista Ultimate SP2
Installation Date: 06 March 2009, 02:58
Intel Mobile Core 2 Duo T9550
Cores 2
Threads 2
Name Intel Mobile Core 2 Duo T9550
Code Name Penryn
Package Socket P (478)
Technology 45nm
Specification Intel Core2 Duo CPU T9550 @ 2.66GHz -
Using the keyboard to select code malfunctioning in Flash, for you too?
Hi all,
Curious if we have any seasoned keyboard lovers here that
suffer this same issue, or better, have solved it! I believe the
issue to be flash though, and a glitch that needs patching, as it
happens on multiple systems for me.
In Windows, in every text entry known to mankind, if your
cursor is at the beginning of a line and you hold shift and press
the down arrow, it selects that whole line. It's a way of selecting
all whitespace at the beginning and end as well as the CRLF. It's
very useful in duplicating whole lines of text because it copies
CRLF (carriage return line feed). Just using your mouse to select a
line of text does not usually copy CRLF, and thus you can't paste
it. Nor does shift-end or shift-right arrowing to select text. It's
just shift + down arrow that also copies CRLF. If you dont copy
CRLF, then you need to press enter after every line you paste.
So my problem? Flash does not have this behaviour (in windows
F8 Pro or CS3 Pro). Flash
additionally selects whitespace on the following line (next
line down). So you get the whole current line, AND the spaces and
tabs on the next line.
This is a glitch. No other program does this. This is
completely non-standard.
Why does this matter? Because code is indented. This means
every time I try to copy some lines of code to re-arrange some
lines (thousands of times a month), it also selects the indentation
of the code on the line below my selection. So when I cut the code
(CTRL+X), it cuts the indentation of that line and I continually
need to fix it. By fixing it, I mean I need to correct the extra
whitespace selection before I even cut the code. I gotta hold shift
and slap the left arrow key to reduce my selection of the
whitespace before I cut.
This one stupid quirk of flash has been annoying me for
months.. So I really need to know.. Does this happen to everyone
else also? Does everyone else use the mouse to copy code? Am I
alone here? Or is this just happening to me?
Quick way to test it is just to open
any text editor you have. Any at all. Notepad, C# studio,
wordpad, dreamweaver, who cares, a web form, yada... Anything!
Hell, do it in the quick reply field on this page!! And then put
your cursor at the beginning of any line, hold shift and press your
down arrow. Notice it select the line, but nothing more.
Now do it in flash. Notice it wraps the selection to the next
line.
Why the hell did this get past beta testing for over a year
straight?Here's some quick pics of what I mean. Here is the same lines
of code selected in SEPY AS Editor, Dreamweaver (lol) and standard
windows Notepad.
SEPY Editor Example
Notepad
Dreamweaver
K.. now here's what happens in flash CS3 (and flash 8) both
professional:
Stupid Flash
Notice the extra whitespace selected on the next line up to
the brace? Does that happen for you?
This happens for me on 3 different workstations here. Old
Win2K SP4 Pro box with Flash 8. WinXP Pro (32bit) with Flash CS3.
Vista Ultimate (64bit) with Flash CS3. So this can't be happening
to me alone.
Anyone else get that behavior? -
Solution for :SIGNIFICANT "BUFFER BUSY WAITS" FOR AN PARTICULAR AQ TABLE
Hi,
My customer is observing buffer busy waits for a particular table we have these options to remove this:
Buffer busy waits are common in high volume AQ systems (just the way the
AQ works),
so what options do we have to reduce this contention
1. Iis partitioning supported
2. should we unlock the stats and gather them
3. any custom indexes that can be used to help reduce
4. any changes to segment storage options
WE require answer very fast. Many thanks in advance!!!906748 wrote:
Hi,
My customer is observing buffer busy waits for a particular table we have these options to remove this:
Buffer busy waits are common in high volume AQ systems (just the way the
AQ works),
so what options do we have to reduce this contention
1. Iis partitioning supported
2. should we unlock the stats and gather them
3. any custom indexes that can be used to help reduce
4. any changes to segment storage optionsHow does this performance issue relate specifically to the o-o tehnology of PL/SQL and SQL?
WE require answer very fast. Many thanks in advance!!!Then use Oracle Support. That is what PAID support is for.
Or do you expect professionals with jobs, spending their free time to assist others here, to simply stop doing what they get paid to do, and jump to your demands for an urgent resolution for you problem... for free?
Think again. -
Simple shell script utility to copy abs tree for build
Hi,
I'm learning shell script and decided to make a simple script to copy the folder i want from /var/abs to
a new folder so i can build the package. here it is: (remember, i'm new to shell scripting, if you know a better way to do it, you can modify my script
and post here a better solution, so, i (and others) can learn with my errors)
#!/bin/bash
#Looks for the abs tree of the software you want
#and copy it to your build path
ABSTREE=/var/abs
echo -n "What software do you want? "
read absname
result=$(find $ABSTREE -name $absname)
for i in $result; do
echo -n "$i, is this what you want? [y/n] "
read opt
if [ $opt = "y" ]; then
echo -n "Copy to... "
read buildpath
relative=${i#$ABSTREE}
absolute=$buildpath${relative%$absname}
mkdir -p $absolute
cp -r $i $absolute
echo "$i successfully copied to $absolute"
exit 0
fi
done
exit 1spoonman wrote: mkdir -p $absolute
cp -r $i $absolute
echo "$i successfully copied to $absolute"
You are assuming `mkdir` and `cp` were successful. You should test them to make sure, and exit with failure if not:
mkdir -p $absolute || exit 1
cp -r $i $absolute || exit 1
echo "$i successfully copied to $absolute"
You could also include your own error message, but mkdir and cp would throw their own if something fails...
mkdir -p $absolute || { echo "mkdir failed"; exit 1; }
cp -r $i $absolute || { echo "cp failed"; exit 1; }
echo "$i successfully copied to $absolute"
Another way is to use `set -e` which will exit the script on any failure without explicit testing:
set -e
mkdir -p $absolute
cp -r $i $absolute
set +e
echo "$i successfully copied to $absolute" -
Simple question about mount and delay script
Hello, I have a simple question about mounting volumes on start up.
My computer wakes up auto - and then auto there are serveral applescript tasks (mount and start up programs)
I use this script (daily) for serveral connections with external volumes I always need the connect to. ( In the script I use this code 3 times for other locations) I do this on start up.
set Uname to "XXX"
set Pword to "XXX"
set someVolume to "afp://XXX.XXX.XXX.XXX/XXX/XXX
mount volume someVolume as user name Uname with password Pword
(same code for 2 other locations)
When i do this on start up sometimes the script says there is no connection possible. I guess it's because on start up the connection isn't there. And 1 minute later when computer is total ready the connection is ok. When I run the script then It works. Just sometimes ( In the morning) 'It' want to connect but the script stops. When i do it manually(I run the script again) it works just fine.
Is it possible that I need a delay? Can someone explain this?
How would I make a delay handler for this script? Is that the best solution?
Thanks in advance. This is something small i'm wondering about.
ColinBTW, If you saved the script as an application +(and not as an application bundle)+ you could drop the script on to *Drop Script Backgrounder* (freeware).
Then the script would run in the background, so, you wouldn't see it running in the Finder.
<http://www.macupdate.com/info.php/id/7922/drop-script-backgrounder-x>
Tom -
Search for ZfD Agent install script
I am looking for a script / batch file for installation of the ZENworks agent without reboot of the workstation.
I am just updating from ZfD 7 SP1 ir3a to ir4 and if I install it manually and start the ZENworks services after install everything is still operational without reboot.
However if I install the agent with a ZENworks application package it always needs a reboot to activate the ZENworks services again - especially the Workstation-Manager
I tried it with pre- and post launch and distribution scripts, and with batch file installation. Everytime when the Workstation-Manager stops the installation ends but the post-scripts and batch processing stops as well. It always requires a reboot to activated the Agent again - or a manual start of the Workstation-Manager service.
I need to find just a way to call a batch file after the MSIEXEC process finishes in order to perform a "net start Workstation-manager".
The difference to other invoronments might be, that the Application is assigned to the Workstations instead to the users like in most other environments.
Thanks for your ideas, KlausWell .... [toot horn]
This is a link to a script I wrote in AutoIt that I used for many ZfD6 - 7 deployments. Was very successfully in getting the agent out and you run it from the login script.
Zenworks 4x - 7.x Workstation Agent Automated Deployment - Novell: ZENworks FAQ - Tek-Tips
I didn't write it to do a removal of the agent, but would be simple enough to be added. On the same forum site, in the Zen FAQ's I also posted the source code for the script I have been using to do ZCM deployments. In it has the code you would need to add to facilitate the uninstall of the agent so you can do a reinstall.
Originally Posted by Croaker
You may need put *everything* in a single batch file.
I.e. app copies the zfdagent.msi to the workstation (it won't work off a
server, because as soon as you stop the workstation helper/manger, the
workstation will lose the ability to install from the network)
Then executes the batch file
The batch file stops the zenworks services, unloads the NAL (may not be
necessary, not sure if the msi will do this)
Batch file then installs the ZFD agent with the noreboot option.
batch file restarts each service
Problem will be the batch file really can't re-start the nal correctly.
Since the batch file will be running under the SYSTEM scope, anything it
launches will be under that scope too (ie.. the NAL), so when it loads, it
wouldn't see any user-based apps.
>>> On 7/1/2009 at 10:36 AM, in message
<[email protected]>,
dgibbons<[email protected]> wrote:
> I would like to echo your question. I have a problem right now in
> whichupgrading the agents from ZfD 7 SP1 ir3a to ir4 will break the agent
> andthe only way I can recover is to manually uninstall the agent,
> rebootand reinstall with ir4. I have not yet been successful in scripting
> it(but then I am not that smart when it comes to scripting either) so
> ifanyone has a good solution I too am very much wanting a method
> thatworks. Thanks
> Darcy--
dgibbons--------------------------------------------------------------------
----dgibbons's Profile:
> NOVELL FORUMS - View Profile: a10425 this thread:
> Search for ZfD Agent install script - NOVELL FORUMS -
How do you pass shell scripts with cocoa?
How do you pass shell scripts with cocoa?
You asked for more detail -- I don't know if this is what you were referring to or not, but here's a little more detail on how to use the system() function if that's what you wanted to know.
As etresoft mentioned, the system() function can be useful for the kind of thing you are talking about. You will need to write the following statement at the top of your code if you want to use it:
#include <stdlib.h>
To use the system() function, simply put the command as you would write it in the Terminal between double quotes between the parenthesis. For example, something as simple as:
system("ls");
I don't what the practical use of the above statement would be, but it will run, and that's the general format for the system() function. So just put between the quotes whatever command you want to send.
Hope there was something helpful here. -
Why does the Java script work on my RSS feed work for Internet explorer but not for Firefox?
I have finished building the website for my Girlfriend and the only thing left is the RSS feed. It works just fine in IE 8 but in Fire Fox 9 when the widget is clicked a bookmark box pops up and asks if I want to save it as a bookmark. I am not a Java script programer so I am hoping for some help here!! Here is the script:
<li id="rss"><a href="http://www.susangabrielle.com/1/feed" title="RSS" alt="rss"><img src="/files/theme/rss.png"></a></li>
The sight is http://www.susangabrielle.comPresumably you fixed it, the RSS seems to work for me
* e.g. http://www.susangabrielle.com/1/post/2012/01/post-title-click-and-type-to-edit.html <br/> although I get a message about missing plugins -
How to get feedback messages for schema creation script created by Tasks- Generate Script
I am using sql server 2008 R2. I created a script file by using Tasks->Generate Scripts. I
selected option so only create statements are generated for all objects – tables, indexes, views, functions etc in the database.
Then when I used this generated script to create objects in another database in SSMS, it created the objects but did
not give me any feed back, i.e., table created, view created etc. I thought my script did not run , but when I refreshed left panel
of SSMS and I can see all created objects.. So question is what is needed to get
feedback when sql statements are run..You need to add the PRINT statements yourself for that. The wizard will not do it for you.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
Looking for a One to Many script to extend the system partition for Windows 7 machines
Looking for a One to Many script to extend the system partition for Windows 7 machines
Pre-written scripts can be found in the repository:
http://gallery.technet.microsoft.com/scriptcenter
If you can't find what you need, you can request a script (no idea if anyone ever bothers to fulfill these requests though, I know I don't):
http://gallery.technet.microsoft.com/scriptcenter/site/requests
Let us know if you have any specific questions.
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing) -
I have a requirement where I have to give the list of users who can access a specific computer define in AD.
I am new with PS.
Do you have a script to list users that can access a computer object of AD ?
I have executed the following script but it does not give me the access rights of who can access the computer 'computername'
How can i have this information. please help
Import-Module activedirectory
$computer=get-adcomputer "computername" -properties ntSecurityDescriptor
$omputer.ntsecurityDescriptor.Access | select-object -expandproperty IdentityReference | sort-object -uniqueI would say that, since the OP has so little info, there are no policies in use. It there were then this question would never be asked the way it is being asked.
I had a client call with a letter from their insurance company; an accountant with malpractice insurance. THey asked the same question inmuch the same way. "What computer can you users access?" The question should be more like
"Do you have a policy that restricts access to computers and do you audit for compliance?"
I have had other clients whose insurance asked the question in that way. It produces a better view of what should be happening and how to show compliance.
I recommend that companies being asked these questions by their legal departments or insurance companies should contract with a god computer security consultant to assist with answering these very tricky questions. Of course if it is just you boss's
curiosity then you may need to discuss his requirements with him in more depth.
¯\_(ツ)_/¯ -
Ho to find script and the related print program for print preview of PO
Hi All,
We are getting some text output on the print preview of a purchase order.
How can we determine the driver script and the corresponding print program for this.
Can you please guide on this.
Thanks in advance.
Regards,
SanjeetU Can check Driver program and form related to that program table is TNAPPR
Goto NACE t.code
Selct Application ---> click on output types
then u wil get one window there select proper output type and
double click on processing routines u wil get form name and related driver program name also
Plz try this....
Edited by: Upender Verma on Feb 9, 2009 1:33 PM
Edited by: Upender Verma on Feb 9, 2009 1:37 PM -
Request for Quote IN SAP SCRIPTs
Request for quote in SAP Scripts
Do any one was modified MEDRUCK layout??
Please let me know ,which elements
do they people used??
thank youHi Silpa,
You needn copy the MEDRUCK Script for your specific purpose. You can create your own script for your purpose. Its not necessary that you have to copy the original one and proceed.
Link:
http://www.sap-img.com/sapscripts.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/0db74a494511d182b70000e829fbfe/frameset.htm
Reward if helpful.
Regards,
Tushar
Maybe you are looking for
-
When will the ability to save progress be available?
I have a form that I want to use in Forms Central but it is rather long so I need the ability to save option. Any ideas on the timeline? Thanks Valerie
-
just updated to Maverick and the info-tab seems to be gone in iTunes 11.1.2 to sync to my iPhone and iPad!!?!?! I guess we in europe think a bit different in using cloud systems and are not that easy willing to share our personal informations with th
-
I accidently deleted recently added folder, How can I get it back?
How can I re add my recently added folder?
-
MIGO BADI to predefine field values
Hello Experts, I would like to ask does anyone know which BADI can be used to predefine field values for the MIGO transaction. I would like to add source code to manually determine the BATCH number and make it default when the user runs the MIGO tra
-
Hi, it looks like several people are having this problem too. But everything suggested doesn't seem to solve the problem. All I can do is post here... OS: Windows 7 Browser: IE 9 (32-bit) What happens: If I go to youtube, or well... Anywhere, it tell