A slightly different "edit in" from Lr to Ps question

I have the most perplexing issue with Lr round-tripping to Ps that I have ever encountered. I spent 14 hours today uninstalling and reinstalling Lr and Ps and resetting plugins, settings and preferences, and could never get images to “edit in” from Lr to Ps. Finally, after the 5th reinstall and more “other” things than I can count, I just gave up. Quite by accident I went to another FOLDER in Lr and to make a long story short realized that only the FOLDER (and associated collections) for this one particular shoot will not “edit in” and all other photos in Lr open in Ps like normal. So… is there ANYONE out there that can think of why on earth such a crazy thing cold be happening. I am completely stumped. Thanks for your time and consideration.

with filters=off i have no idea what happened.
But when working with filters and using flags i've seen the bug (IMHO), that the PSD-File is not being flagged like the source-picture is - or maybe it was the rating that wasn't set? Not sure, it's on my other machine far away… But my feeling is, that this was different in LR2 where i was always able to see the new created PSD-File next to the original. In LR3 it's (at least for me) a bit unpredictable what will happen after editing in PS…

Similar Messages

Exposure and lens distortion slightly different after photoshop edit

I'm pretty new to Lightroom and Photoshop, I have a pretty good understanding of Lightroom but not much with Photoshop yet. I opened a photo that I edited the way I want including lens correction, exposure, etc. from lightroom into photoshop, did some editing with the patch tool to fill in some bare grass area on an exterior shot, then saved photoshop file as psd file in photoshop, then closed file and went back to lightroom, the photo seams to have a slightly different lens distortion not the way I want and different exposure compared to my original edited raw image. Why is this happening? why does photoshop slightly change the lens distortion?

Is LR applying lens distortion, again, by default, perhaps also vignetting correction which would change the exposure especially in the corners?
Most lens profiles that contain information about geometric and vignetting corrections are for raw files only, but a few also have non-raw versions. it is possible that your LR defaults say to apply lens corrections whenever a file is imported and for the lens you're using there are both raw and non-raw lens profiles.
A simple way to tell if this is occurring is to go to the Lens Corrections / Profile tab and see if Enable Profile Corrections is checked or not, and if it is, turn it off and see if the image is more the same as the original raw + your PS patch work.

Editing Audio from Timeline in Another Program

Often, one will want to edit the Audio on the Timeline, in another application, like Adobe Audition. Premiere versions allow for this to be done easily, and with exacting control.
Let's say that one has dozens of edited Clips on the Timeline, and they wish to edit ALL of the Audio. * Editing those individual Clips is easy, but how does one edit them all in one file, which will then replace the original Audio in the Clips?
The best way to accomplish this is to Export, or Share the Timeline as an Audio Only file. This Export/Share will be slightly different, depending on the exact Premiere program, and even on the version of that Premiere Program. Often, the Audio-only Export/Share is from the MS AVI Export/Share screen. One would choose Export Audio, leaving Export Video unchecked. If Multiplexing does not automatically set to "None," choose that now.
For this "round-trip" process, the Audio file format is very important. The ideal choice of Export/Share is PCM/WAV @ 48KHz 16-bit. This will yield an uncompressed Audio file, that almost every Audio editing program will easily handle, and is also the format, that one will want to Export, or Save from the Audio editor, for the second leg of our round-trip.
Import, or Open that resultant PCM/WAV in the Audio editing program, and edit, as is needed. When done, just Export, or Save (depends on the program) that edited Audio as a PCM/WAV @ 48KHz 16-bit. In some Audio editing programs, this will be listed as WAV (Uncompressed). The Sample-Rate and Bit-Depth are important, as the 48KHz and 16-bit are the ideal for any flavor of Premiere, and though Conforming will be necessary for editing, it will be easy on the program, and there will be no issues. Stay away from any compressed Audio formats/CODEC's, like MPEG/MP3. You do not want to throw away precious data at any step. That is why we use PCM/WAV for the Export/Share, and then the Export/Save from the Audio editing program.
When done, just Import that resultant PCM/WAV into Premiere. Wait a moment for all Conforming to complete, and then drag that WAV to the Timeline, on a free Audio Track that matches your WAV's Channel-count, i.e. a 2-channel Audio Track for Stereo, or a 1-channel Audio Track for Mono (these must match in Premiere). For more detail on channel-count and Audio Tracks, see this ARTICLE.
Now comes a personal preference for completing this round-trip. I like to leave my original Audio, just in case I change my mind. Gathering up and Trimming the original Audio can be a tedious task. As I have placed my edited WAV onto an empty Audio Track, I just go to Window>Audio Mixer, and Mute any/all Audio Tracks, containing my original Audio. It's still there, if I ever need it, but is now Muted.
Hope that this helps,
Hunt
* Sometimes we want part of the Timeline's Audio, but that part spans multiple Clips. There is no need to Export/Share the entire Timeline, and then Trim it. Just set the WAB (Work Area Bar) to the part that we do want, and make sure to choose "Work Area" in the Export/Share settings dialog.
Also, and especially when doing just a segment, covered by the WAB, I like to position the CTI (Current Time Indicator) or Playhead (CS 5.5) at the beginning of the WAB, with Snap ON. As I drag my edited WAV to the free Audio Track, it will Snap into place, right at the beginning of the WAB.

There isn't any simply way to where you want to go.
You can export each track separately. Switch off the audibility for all the tracks except one. Export the track. Repeat for each of the tracks in the timeline. Export the video for reference.

Creating several slightly different versins of video

Hi. I am working on a video where we want slightly different versions of it for different coteries (this is a legal thing, they are all in English). I know I could duplicate project and make changes but we will be contently evolving the video and most of it is the same. In FCP 7 I would do this with nested sequences. I would have a sequence for each version and have a number of reusable nested sequences for the content that is the same. Where it is different either edit straight into the sequence or have sequences specific to the version which I also nest.
How should I approach this with FCP X. Maybe I can share compositions between projects in the same library?
Ben

funkytwig wrote:
I am editing straight in H.264, if I have performance issues I have proxies to fall back on.
You would be doing yourself a huge favor if you right click on the H.264 originals in the Event Browser and select Transcode media and select Create Optimized Media. You can delete all those transcoded files later when you finish your project, but in the meantime, I have to say: FCPX will struggle to play original media like H.264 while editing. H.264 is a highly compressed "delivery" format optimized for playback only. The transcoded optimized media in FCPX is ProRes 422 optimized for editing. Every frame in ProRes is a complete image of that frame whereas in H.264, only the data that changes from one frame to the next occupies a specific frame (except for "key frames" which are complete images used as a starting point in a "block of images"). It takes a lot of processing power to assemble a complete frame for editing/display when using that format.
Karsten was right about nesting compound clips... they will start taking a severe performance hit if you use too many. FCPX has a feature that allows you to build "Auditions" which lets you line up as many clips as you like to occupy a specific time in your project. You can select which version you wish to use right in the storyline. This is a very short tutorial demonstrating the use of auditions in FCPX : http://www.rippletraining.com/under-5-controlling-your-auditions.html

Ipod plays a different file (audiobook) from the one selected.

I have a mystery. let me start by saying i have done all the standard stuff all the way up to wiping and reinstalling the ipod.
I have about 8 audio books (short stories for the kids to listen to) and when I select one to play it always plays a different audio book from the one I select. it happens to all the audio books. It never happens to music and never happens when I play the file through a different directory than the audio book directory (i.e. go to the artist's listing and select the author's name).
So weird - I can work around it but would love a solution so the kids can pick books to listen to themselves.
any ideas?

Yes...but do I do that in the TableModelListener ?
This is what I've tried in the TableModelListener:
public void tableChanged(TableModelEvent e)
         System.out.println(e.getSource());
           if(e.getType() == TableModelEvent.UPDATE)
                TableModel model = stdTablewCombo.getModel();
                int row = e.getFirstRow();
                this.cellValue = ((String)model.getValueAt(row, 0));
                if (cellValue != null)
                     this.selectedIndex = this.stdComboBox.getSelectedIndex();
                      System.out.println("Selected Index:" + this.selectedIndex);
                      if (this.selectedIndex >= 0)
                         String valueToSet = this.lovStringB[this.selectedIndex];
                         model.setValueAt(valueToSet, row, 0);
                      else
                           System.out.println("Value in cell is not from List");
                      }It returns the selectedIndex value allright.
It sets the value of valueToSet string allright.
it also does the model.setValueAt allright....but this triggers a tableChanged event and it goes back up - this is also fine. However, when it now comes back to the this.selectedIndex = , this again returns the index of the original selection and not a -1 (for values not in the ComboBox list). This makes it go into an infinite loop and gives me a StackOverflowError.
Edited by: 799076 on Oct 10, 2010 9:41 AM
Edited by: 799076 on Oct 10, 2010 9:49 AM

Published site slight different

When publishing my site to a folder on my computer it looks slightly different to how it does in iWeb. Some text is underlined and the alignment is not quite how it should be.
This isn't a problem with hosting the site on the net, it's something to do with what happens to the site in iWeb as it's being published to the folder.
Any ideas?

On the Contact page, try increasing the size of the text box slightly. It loads with a return after "Email:" before it straightens itself out. Also do a Command A on pages to check that objects/text boxes are not touching or overlapping.
If you tried the troubleshooting steps and they didn't fix the underlined text problem you need to go one step further.
Delete the offending text, save and quit iWeb
Delete the .plist, reboot your Mac and run Disk Utility to repair permissions
Launch iWeb, add the text, save and publish
Deleting the text and rebooting gets rid of the screwed up info from the domain file. Doing a restart is the only way to clear redundant files out of iWeb so you should do it regularly.

Default in "order by" in select query may be different in 11g from 10g

Hi, I am wondering if when you are querying a table in 11g and you use the order by clause and there is more than one occurrences with the same values in the order by, if the 11g default is different than from 10g. For instance.
DECLARE MHBulk CURSOR FOR
select invoice_nbr,
               customer_nbr,
                post_century,
                post_yymmdd,
     from CUSTOMERS
     where customer_nbr = 1234
     order by
           post_century,
           post_yymmdd;
If you have more than one occurrence of the same customer_nbr, post_century, and post_yymmdd it looks like the default order for how 11g retrieves the records is a bit different than the 10g default.   Does anyone know why this is?

JustinCave wrote:
In any version of Oracle, if your ORDER BY does not specify a completely unique order, the order in which ties are broken is arbitrary. Realistically, it will depend on things like the specific query plan chosen, the physical order of data on disk, which parallel query slave read the row, etc. So it is subject to change within the same version of the database when, for example, a query plan changes. It is entirely plausible that the results would be returned in the same order for years and then suddenly change one day. If you care about the order of ties, you should add additional logic to the ORDER BY clause that specifies the order you want rather than assuming that there is a "default" order applied.
Upgrading to a new version of Oracle, particularly if that was done via something like exporting and importing the data so that you're changing the Oracle version and the physical order of data and various object statistics, it is not at all unusual that you would get slightly different plans and that ties would be broken differently. I wouldn't assume that there is a new "default" order, though. It's entirely possible for the order to change if the query plan changes again.
Justin
Well, what happened is we've gotten a few new customers and those customers are on Linux oracle 11g. All the other customers are on regular unix 10g. So, it sounds like we've just been lucky with the order until now. In our system we have a sequence number column which is unique and I solved this by adding that in the ORDER BY clause. I was just curious as to whether oracle had a default when it found duplicate fields in the ORDER BY clause. I can't imagine that oracle doesn't have a default like unique_session_id or something like that.

Account balance different whether stated from FS10N or ZCAL

Hello everyone,
This is a slightly difficult issue I propose to you. This is about an account balance whose value is different whether it is stated from FS10N or stated with an other transaction, ZCAL. After some investigations, the gap comes from the carry-forward, which is different whether stated from FS10N or ZCAL.
First of all, is ZCAL a standard SAP program?
If yes, what kind of check could be done?
If not, any idea?
Thanks!
Stan B.

hi Stan,
ZCAL is not standard, therefor any comparison with standard does not make much sense. A developer has to sit down and see how ZCAL works. Asking here is just wasting time, as no knows this transaction...
ec

Editing/Exporting from a collection

If I import photos into my lightroom library like a wedding then create a collection of that wedding and chooose the photos I want for that collectio. Then I edit the collection I am confused if my edits stay edited for export. Sometimes I see little /- boxes in the bottom corner and when I click on a photo it changes. the sometimes they will all change to a different edited version??? I need to make sure the collection I edit, STAYS edited the way I did it. Isnt it supposed to do that? PLEASE help me understand this...

I cannot help an answer, but some images to explain-
With ONE image selected on the filmstrip in develop module, you will see "Previous" and "Reset" buttons. "Previous" will copy the adjustments to the next single image you select.
With TWO or more images selected on the filmstrip,you will see "Sync..." and "Reset". Clicking "Sync" will copy adjustments from visible Master selected image to secondary selections (one or more).
With TWO or more images selected on the filmstrip, AND you set the SWITCH 'up' ,you will be automatically syncing every adjustment you make to the visible image onto every other selected image. Useful for global adjustments on many images eg. white balance. Caution-Remember to turn if off!

NM output is slight different than in MA

Hi guys,
one questions from MA newbe.
i use default parser in NM and default viewpoint in MA,
but there are some missing information in MA:
No router preference and output is slight different than in NM, like A is H now.
i used before NM, but now trying to swith over MA
Thanks for help

Yes, I believe this is a bug. I've filed one and hopefully we can get this addressed in the next public release.
Paul

Pictures look slightly different in Photoshop CC compared to windows Photoviewer (lighter)

Hi there,
I purchased PS CC last week, before I worked with PS CS3.
From the moment I started using CC I noticed that my photos look slightly different in Photoshop CC compared to windows Photoviewer or in PS CS3.
They look slightly lighter, which makes it hard to adjust the correct levels of contrast etc
Is there a way to sync the view inside CC to look the same as in other programs?
Marcel

Thanks for your reaction!
Inside Photoshop CC, the settings are like this:
In Photoshop CS3 it's set to 'North america general purpose 2...
This makes me think of the following question: After i install a default windows 7 64 bit in dutch and a default Adobe PS CC, do I need to change anything in the default color settings in order to allign the different programs?
Marcel

Why do each of the company's Windows Servers have a slightly different list of root CAs?

Hello,
I just noticed two event 4097s come through for CAPI2 in the Application event log. I started poking around and couldn't find any of these events on any other Windows Servers. Apparently two third party root certificates were auto-updated. When I looked
at the list of root CAs in the Certificates Console on a few Windows Servers I noticed that each had a slightly different set of root CAs.
What is the best practice with managing these root CAs in the cert stores of each server? I would like to verify each one and determine why some servers have some root CAs and others don't. Such as the root CA for USERTrust, with thumbprint "58119f0e128287ea50fdd987456f4f78dcfad6d4".
It's on certain servers in our DEV and PROD environments, but weirdly not consistently on a similar function server.
What are the scenarios in which the root CA list could be modified?
Thank you.

As Elke says, newer operating systems (Vista and newer) build their root trust stores dynamically as they have a need. These are all still vetted by Microsoft, but are not loaded by default. This can cause problems in environments with bad connectivity
or have been prevented from accessing the internet. More details at https://support.microsoft.com/kb/931125
Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years.

Powerpoint renders slides slightly differently on different Macs

I have again this weird problem with Powerpoint.
Sometimes, slides look differently on different machines.
The difference is not very large, but definitely noticeable, in particular, if there are other objects on the slide besides the text.
For an example please see
1. (MacBookPro)
PDF: http://zach.in.tu-clausthal.de/tmp/pptonmacbook.pdf
PNG: http://zach.in.tu-clausthal.de/tmp/pptonmacbook.png
2. (Modbook)
PDF: http://zach.in.tu-clausthal.de/tmp/pptonmodbook.pdf
PNG: http://zach.in.tu-clausthal.de/tmp/pptonmodbook.png
The effect is most pronounced on the first line of bullet 2. (The "R^d" thing is an image.)
I created the PDFs using the print command in Powerpoint and then saving to PDF.
I created the PNG taking a screenshot.
As you can see, there are two problems:
1.
When I print the slide on the MacBook to PDF, the layout of the text is slightly different than on screen.
2.
The layout of the text looks different on both machines.
Both machines run Mac OS 10.6.2 (Snow Leopard).
The powerpoint versions on both machines are identical and up-to-date (12.2.3).
The powerpoint files on both machines are identical (just copied).
I use an in-house font on the slides, which is StoneSansITC; I copied the font files from one machine to the other; they all reside in ~/Library/Fonts, and this is the only place where these font files are located.
I have checked with 'pdffonts' and it seems to me that the Stone fonts are indeed correctly embedded in the PDFs. Here is the output of pdffonts:
% pdffonts pptonmodbook.pdf
name type emb sub uni object ID
NNCXIS+Symbol TrueType yes yes yes 24 0
TYRNZE+Helvetica TrueType yes yes yes 21 0
RTAEGG+MSBM10 Type 1 yes yes no 26 0
ZXGVHI+StoneSansITCStd-Medium Type 1C yes yes no 8 0
ZXGVHI+StoneSansITCStd-Medium Type 1C yes yes yes 17 0
RTAEGG+CMSSI8 Type 1 yes yes no 27 0
ZJTMTS+StoneSansITCStd-MediumItalic Type 1C yes yes no 22 0
JHAIES+Wingdings TrueType yes yes yes 19 0
With pptonmacbook.pdf, pdffonts yields very similar output.
In Powerpoint, I have checked File -> Properties -> Contents, and the list under "Fonts Used" shows the StoneSansITC fonts alright.
The compatibility report in Powerpoint does not report any issues with fonts (only a few warnings about animations, movies, and "some shapes cannot be changed in earlier versions ..").
Does anyone have an idea how I could resolve this differences in rendering?
All hints, suggestions, and insights will be highly appreciated.
Best regards,
Gabriel.

Perfect candidate for this forum: http://www.officeformac.com/ProductForums/PowerPoint/

I have two power cords, they look slightly different. Are they interchange

I have a power cord from my MacBook Pro and from my MacBook. The male plug is slightly different between the two, one attaches on the side of the wire, the other is more of a 'T' on the end of the wire. Are these interchangeable?

This illustrated article should sort it out:
http://support.apple.com/kb/HT2346
The links in the chart are part numbers, which should be on the "brick" part of the adaptor.

S440 - Slightly different WIFI problem

I've read the other lengthy thread on the S440 wifi problem and i'm not sure if mine is slightly different as it has nothing to do with hebernation or sleep mode.
Basically, twice in the last week my wifi has dropped out. I've still been connected to the router, and all other devices in the home are connected and working fine, but my S440 cannot connect to the internet and i get the small yellow exclamation mark over my wifi icon.
The first time it happened, it eventually fixed itself the following day via the network centre trouble shooting, and it came up as some sort of IP address issue.
It happened again last night but it wouldn't fix itself this time. Although this morning, I booted up at the office and its working again.
Its definitely something to do with the laptop as both time all other devices have been ok.
Before i start downloading new drivers, i just wanted to check.

Hi King Harvest,
Welcome to Lenovo Community!
I’m sorry to hear that you are facing the issue with Wifi on ThinkPad S440.
As per the issue it might with Wifi driver, hence we are requesting you to check with updating the latest driver from the support driver link.
Below is the link to enter the downloads page and install exact Touchpad drivers accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
http://support.lenovo.com/en_US/downloads/default.page#
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

A slightly different "edit in" from Lr to Ps question

Similar Messages

Maybe you are looking for