A small issue / Urgent

Hi every body,
THere is Some address change in Purchase ORder, they had made that and asked me to test purchase order printout..
As i am new to this..
How to do this.
This is unrgent issue..
can anybody help me.
Your help is appreciated
Raja.

Raja,
Go to ME23N. Display the PO that you want to output. Click on the Messages button on the toolbar. You should be able to see the messages which have been already triggered.
You can select one of them and and say Repeat output. Make sure the medium is Print if you want to a print out.
Save the PO. This should trigger a print.
Regards,
Ravi
Note : Please reward the posts that help you.

Similar Messages

Just three small issue...

Hello All,
Well after a few months of delay (First me damaging the bois chip then me burning out the motherboard) I finally got my computer up and running. I do have some small issues that I hope someone may be able to help me with.
1.   When I shut down the computer it restarts itself. The only way I can shut it down is to hit the power button in the back of the case.
2.   When I do attempt to shut down the computer and it restart on it’s own I get no video. It also gives three long beeps. Now please understand that the video card works fine when the computer is on or when I do a manual restart. This only happens when I try to shut down the computer.
3.   When I try to use the RAID by plugging up two hard drives the computer well get stuck at the screen where it read the array configuration. The configuration can be correct with the RAID set for stripe two (WD 13GB and a WD 7GB hard drive) Western Digital hard drive’s.
Any type of help would be great. Here are the specs to my computer.
KT3 Ultra2-R
AMD 2100+ XP
512MD DDRAM
WD 20GB
Goldstar 40x12x40
Acer 52x CD-Rom
Jaton Geforce 2 MX/MX 400

wd also have funny jumperless master with no slave setting
normal master only if it has a slave
why raid none matching drives
a stripe will only be 2x smallest and a mirror size of the smallest

Small issue in Business Rules

Dear All
i have a Business Rule callingin BPEL Process based on below XSD file
<?xml version="1.0" encoding="windows-1256" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.bank.com/bankbpel"
targetNamespace="http://www.bank.com/bankbpel"
elementFormDefault="qualified">
<xsd:complexType name="Client-BR-Input-Type">
<xsd:sequence>
<xsd:element name="Status" type="xsd:string"/>
<xsd:element name="is-VIP" type="xsd:string"/>
<xsd:element name="Start-Date" type="xsd:date"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="Degree" type="Degree-Type"/>
<xsd:element name="Client-BR-Input" type="Client-BR-Input-Type"/>
<xsd:complexType name="Degree-Type">
<xsd:sequence>
<xsd:element name="Degree" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
after finishing my rules and decisions, i dropped Business Rule inside BPEL and start to copy values in input parameters of Business Rule, but i face *"Exception - Problem Building Schema !" !!*
and sure my problem now in XSD file, please advise why and how to avoid ? ..

Dear All
Resolved, it is a small issue as i expected, i forget to update in/out variables to map for elements in XSD file like below ..
<variables>
<variable name="dsIn"
element="client:Client-BR-Input"/>
<variable name="dsOut"
element="client:Degree"/>
</variables>
thanks

Two small issues switching from Leopard to Snow Leopard

Hi,
I just recently switched to Snow Leopard from Leopard. I was considering Lion, but heard some bad things about it.
Either way, I noticed two small issues. The first was a hot key set on my Logitech mouse. I had a button preset to all windows expose. In the software
for the mouse driver you can set it to expose specifically. (Its not just setting it to a certain F key). For some reason this doesn't work anymore.
The other problem is when I link my mac book pro to an external monitor thru an hdmi cable, I notice on the tv screen it reverts back to the default
desktop background. Instead of having the picture I set, it shows up on the big screen the blue and purple space image.
Any suggestions?
Thanks

Thanks for the reply,
The Logitech mouse driver said there were no updates available so I figured the expose had something to do
with the new OS system since it now said expose and spaces, which Leopard never had spaces.
So what I did was figured out how to just set it up with the F keystroke and it worked!
When I link my Mac Book Pro to my tv, I use an external keyboard which is more up to date with the quick f keys up top and the arrangement is set up differently [ such as the volume keys are now f 10 and 11 instead of f 3 and 4 or something like that] Hopefully when my mbp is linked to this the keystroke I have set for expose still works. I believe it will.
And as for the desktop bg, after unplugging my tv I notcied it still stayed on the space theme. So I believe I know what may be the issue. I set that bg off of a picture on an external hd, and never saved the image on my computer hd. So I'm assuming it saved the desktop picture in some cache thing or something and once it got linked to an external monitor it got refreshed.
I now how that image on my computer and set, so hopefully the next time I link my computer to the tv, it'll stay.
Thanks!

Help on small issues after WinXP downgrade from Vista

Lenovo 3000 v200
I recently downgraded from Vista to WinXP Professional, and I must say I'm much happier with XP.
Some issues on the install: although I downloaded all drivers from the Lenovo site, the install didn't work from my usb floppy drive.
It recognized the floppy on the F6 portion of the install, but then later it kept asking for the disk to be inserted (it was already in the drive). Workaround was to install by changing to "compatibility mode" in the BIOS, and after install, loading all drivers and changing BIOS back to SATA.
All features of the laptop appear to work perfectly; camera, fingerprint reader, wifi, etc.
HOWEVER: in the device manager, there are 3 yellow exclamation points in the "Other Devices" section, and each of them is labeled "Base System Device." Does anyone know what these are? Why are they not recognized as specific devices? LenovoCare doesn't recognize them either, and I have no idea what drivers to attempt to install for mystery devices.
Also, "Modem Device on High Definition Audio Bus" won't install. I have the current driver, and I've tried updating from LenovoCare, but no luck. As I don't use a modem, this seems irrelevant, but I'd like to install it just the same if possible.
Finally, the LenovoCare recognized a need to install a "Hotkey" update, and it claims to successfully install, but everytime I run LenovoCare it says I need it again. Any comments or observations?
Again, the computer works just fine even with these small issues. In fact, it is better than fine; it is a joy to use and a real speed demon with XP instead of Vista. So I'm not trying to do any rocket science or potentially screw up a very nice situation, but I am trying to iron out these small nuisances.
Thanks to all of you who consider my trivial problems. I really appreciate having knowledgable individuals like yourselves help out a very modestly skilled, but reasonably ambitious user.
Cheers,
Fred

Hello Fred,
I created a blog on this forum called.... "I Explain How To Downgrade From Vista To XP Successfully On A 3000 N100 Laptop" Locate this message and read through it. Try the "Auto Detect This System" I Talk about. It will load the latest drivers and the latest...BIOS..... for your particular model if you have not already upgraded it. You did not mention if you had upgraded your BIOS...... if your running an "OLD" version.... THIS..... could be your problem.
Regards

Installation issue -urgent

Hai frnds
I have got a new dell studio 15 laptop.iam much interested in oracle applications and for the purpose of learning oracle applications i got it.when i tried to install redhat enterprise linux 4 replacing windows xp on my machine it throws the error message as driver not found and the installation does not proceed.when i asked the computer dealers they said that i have to go for some newer rhel version for installing linux in my laptop since its a new brand.
before few days i tried to install oracle applications 11.5.10.2 on rhel 5 but i got a lot of errors and the oracle forums advised me to go for rhel 4 for installing oracle applications 11.5.10.2.now iam confused and dont know wat to do .
my aim is install oracle applications 11.5.10.2 on some newer version other than rhel 4 which supports my dell laptop
i want to know whether installation of oracle applications 11.5.10.2 is possible on rhel 8 or rhel 9.will the installation goes properly.
Thanks and Regards
Parithi.A.

Hi,
Please see your other thread.
install issue -urgent
install issue -urgent
Regards,
Hussein

Some UI papercuts and smaller issues

The CS6 Beta, while generally awesome and full of plenty of new things, has plenty of smaller issues too. I know and understand that this is pre-release software, however I fear that some of these might be missed on release which would mean that they would never get fixed. Just personal experience with big software companies, nothing personal.
So here are just some that quickly caught my attention:
Hex field in color picker, while extremely useful, is awkwardly sized (especially as Hex values are only 3 or 6 symols long)
Ruler tool would greatly benefit from the info tooltips introduced for the Selection and Move tools. Same would probably apply to the Eyedropper tool.
Clicking on a shape layer's thumbnail no longer hides the shape's outline (I know that there's a global setting for this, but I heard some people disappointed with this on Twitter)
Combining of all Workspace layouts into one dropdown menu. I personally loved the rapid switching possibility provided by the button layout in CS5.
Additionally, I noticed a rather annoying bug with Type tool: Activating a text layer with the Type tool doesn't update the information in the toolbar nor in Characters panel (try it with two differently-styled text layers — the information for the old one is still displayed even though the new one is active).

magnet14 wrote:
Additionally, I noticed a rather annoying bug with Type tool: Activating a text layer with the Type tool doesn't update the information in the toolbar nor in Characters panel (try it with two differently-styled text layers — the information for the old one is still displayed even though the new one is active).
I can't reproduce that.
Here's what I did:
1. Create two different text layers, with different fonts, different colors, different sizes.
2. Click on the T in the Tools Panel to activate the Horizontal Type Tool.
3. Now if I click on each layer all of the things you mention are updated with info from that layer.
-Noel

A few small issues I can't find fixes for

Hi everyone, I've been using arch for a little bit now and really enjoying the experience. I have run across 3 small problems and other than that everything thing seems to be running flawlessly. I'd appreciate any help with these, and thanks in advance. I have googled trying to find solutions and searched the wiki but either none of the issues were listed or the fixes for them didn't seem to have an effect, but if I missed something sorry, just if you want to point me in the right direction that'd be appreciated.
So some specifics about my system first, I'm running on arch linux 64bit using KDE as my desktop environment.
Okay so problem number 1:
Sometimes when arch goes to boot it fails to mount /dev/sda2 which is my root partition, This doesn't happen everytime but I'd say 50 or 60 percent of the time, but when it does I give it a restart once or twice and it loads into arch just fine. I can restart my computer if anyone wants the exact wording I get, but it goes along the lines of "failed to mount /dev/sda2 you are now being dropped in to a recovery shell" Now I'm not sure but this might be because of the weird way I set the harddrive partitions up, but it worked in all the distros I used before settling on arch, but to give you an idea, I'm using 2 300gb hard drives, I have them split so that 1 hard drive is completely devoted to my / and /boot partitions, the other one has /usr /tmp /var and swap on it. In addition I have a 1tb drive for storage that is devoted to /home. If it is causing the problem and I have to reformat and go to a more conventional partition scheme I will, but I'd prefer to avoid that if at all possible, just because I am rather settled in to this install.
Problem number 2:
Amarok takes forever and a day to load, somewhere in the area of 60+ seconds, when I start it via the terminal I get this output:
KGlobal::locale::Warning your global KLocale is being recreated with a valid main component instead of a fake component, this usually means you tried to call i18n related functions before your main component was created. You should not do that since it most likely will not work
(amarok:19322): GStreamer-CRITICAL **: gst_debug_add_log_function: assertion `func != NULL' failed
amarok(19322)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
amarok(19322)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
amarok(19322)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
amarok(19322)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
amarok(19322)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
amarok(19322)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0)
amarok(19322)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0)
amarok(19322)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0)
amarok(19322)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0)
amarok(19322)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "Amarok Script Console"
amarok(19322)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "LyricWiki"
amarok(19322)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "Cool Streams"
amarok(19322)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "Librivox.org"
** AMAROK WAS STARTED IN NORMAL MODE. IF YOU WANT TO SEE DEBUGGING INFORMATION, PLEASE USE: **
** amarok --debug **
I thought maybe it was the gstreamer backend because the wiki said it might cause problems and to try using xine instead. However doing this didn't seem to help at all.
Problem number 3
Flash is all weird when I use Kwin, when I use compiz it works near flawlessly but my issue with that is then kde doesn't act nearly as smooth as it does without compiz. When I use flashplugin from the repos I can't go fullscreen because it makes everything freeze up, and when I try flashplugin-prerelease from the aur flash is always in the spot where it loaded meaning if I change tabs in firefox it goes through the other tab and if I scroll it stays stationary and everything else scrolls behind it.
Again I apologize if I missed it in the searches that I ran and these have been solved elsewhere, but thanks in advance for all help given.
Edit: Installing pulseaudio and using that instead of alsa seems to have fixed amarok starting slowly.
Last edited by Sinner (2011-03-26 05:05:57)

milomouse wrote:Maybe you should use UUIDs instead of /dev/sd* to avoid any possible device confusion (type 'blkid' to see your UUIDs), though from your first post about "cannot mount /dev/sda2" it still appears to check for root device correctly. At any rate, in your grub or lilo or syslinux (whatever bootloader you have) config you could also change root=/dev/sda2 to root=/dev/disk/by-uuid/YOURROOTUUID (however your bootloader can handle it) to help further reduce possible errors. (helpful link: https://wiki.archlinux.org/index.php/Pe … ice_naming ) Trying to think of what else it could be since it only happens every now and then, which is a little strange.
Oh my bad I forgot to say I'm using grub, but yeah I went through and did that, That seemed to stop me being loaded into a recovery shell or whatever, but when arch started to boot about 2 out of the 5 times I restarted to test it, it said file systems didn't check and had my log in as root to try to remount the partition. Also I got a COMERROR=-32 after which it said it was doing a comreset and would retry in 8 seconds after doing that 3 times it booted almost every time unless it ran into the filesystem check.
Last edited by Sinner (2011-03-25 16:29:32)

SQL Query Group By Issues - Urgent

I currently have an issue writing a pl\sql report, I can get part of the way to the results I want but the group by clause is causing problems, because I have to add more columns to the group by, dispersing the figures further, I have tried it with coalesce for each of the task types but I still get the same results, I am getting close to the results I need but not quite there yet. I would really appreciate it if someone could take at look at this for me as it is an urgent requirement.
The report is based on the tables similar to the following:
TASKS, ORGANISATIONS, POSITIONS
A position is a member of an organisation.
A task has a position assigned to it.
The SQL for the tables and to insert the data that would produce the report is detailed below:
CREATE TABLE TASKS
(     TASK_ID NUMBER NOT NULL ENABLE,
     TASK_TYPE VARCHAR2 (15 BYTE) NOT NULL ENABLE,
     STATUS VARCHAR2 (15 BYTE) NOT NULL ENABLE,
     POS_ID NUMBER NOT NULL ENABLE,
     CONSTRAINT TASKS_PK PRIMARY KEY (TASK_ID));
CREATE TABLE ORGANISATIONS
(     ORG_ID NUMBER NOT NULL ENABLE,
     ORG_NAME VARCHAR2 (15 BYTE) NOT NULL ENABLE,
     CONSTRAINT ORGANISATIONS_PK PRIMARY KEY (ORG_ID));
CREATE TABLE POSITIONS
(     POS_ID NUMBER NOT NULL ENABLE,
     POS_NAME VARCHAR2 (25 BYTE) NOT NULL ENABLE,
     ORG_ID NUMBER NOT NULL ENABLE,
     CONSTRAINT POSITIONS_PK PRIMARY KEY (POS_ID));
INSERT INTO ORGANISATIONS (ORG_ID, ORG_NAME) VALUES (1,'ABC');
INSERT INTO ORGANISATIONS (ORG_ID, ORG_NAME) VALUES (2,'DEF');
INSERT INTO ORGANISATIONS (ORG_ID, ORG_NAME) VALUES (3,'EFG');
INSERT INTO POSITIONS (POS_ID, POS_NAME, ORG_ID) VALUES (1,'ABC-1', 1);
INSERT INTO POSITIONS (POS_ID, POS_NAME, ORG_ID) VALUES (3,'ABC-2', 1);
INSERT INTO POSITIONS (POS_ID, POS_NAME, ORG_ID) VALUES (2,'ABC-3', 1);
INSERT INTO POSITIONS (POS_ID, POS_NAME, ORG_ID) VALUES (5,'DEF-2', 2);
INSERT INTO POSITIONS (POS_ID, POS_NAME, ORG_ID) VALUES (4,'DEF-1', 2);
INSERT INTO POSITIONS (POS_ID, POS_NAME, ORG_ID) VALUES (7,'EFG-1', 3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (12,'TASK_TYPE_3','LIVE',3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (11,'TASK_TYPE_2','LIVE',3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (10,'TASK_TYPE_2','LIVE',2);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (9,'TASK_TYPE_2','LIVE',2);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (8,'TASK_TYPE_1','LIVE',3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (7,'TASK_TYPE_1','LIVE',3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (6,'TASK_TYPE_1','LIVE',3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (5,'TASK_TYPE_1','LIVE',3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (4,'TASK_TYPE_1','LIVE',2);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (3,'TASK_TYPE_3','LIVE',1);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (2,'TASK_TYPE_1','LIVE',1);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (1,'TASK_TYPE_1','LIVE',1);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (13,'TASK_TYPE_3','LIVE',3);
The report should detail the following information based on the information in the tables:
1st Column
Organisation
ABC
DEF
EFG
2nd Column
No. of Positions in Organsiation
3
2
1
With total of the number of people in all of the organisation 6
3rd Column
Number of tasks assigned to the organisation of task type1
2
1
4
4th Column
Number of tasks assigned to the organisation of task type 2
0
2
1
5th Column
Number of tasks assigned to the organisation of task type 3
1
0
2
Total no of tasks assigned to the Organisation
3
3
7
Message was edited by:
Suzy_r_82
Message was edited by:
Suzy_r_82

Hi,
Apologies, my insert statements where incorrect, if you try the data below instead it should give you output I was expecting
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (1,'TASK_TYPE_1', 'LIVE',1);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (2,'TASK_TYPE_1', 'LIVE',2);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (3,'TASK_TYPE_1', 'LIVE',5);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (4,'TASK_TYPE_1', 'LIVE',7);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (5,'TASK_TYPE_1', 'LIVE',7);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (6,'TASK_TYPE_1', 'LIVE',7);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (7,'TASK_TYPE_1', 'LIVE',7);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (8,'TASK_TYPE_2', 'LIVE',4);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (9,'TASK_TYPE_2', 'LIVE',5);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (10,'TASK_TYPE_3', 'LIVE',1);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (11,'TASK_TYPE_3', 'LIVE',7);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (12,'TASK_TYPE_2', 'LIVE',7);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (13,'TASK_TYPE_3', 'LIVE',7);
The results I would like are
ORG    No. of Pos     No of Task    No of Task     No of Task     Total no
           In Org           Type1 for      Type2 for        Type3 for       of Tasks
                               Org             Org                Org               for Org
ABC        3                   2                 0                   1                   3
DEF        2                   1                 2                   0                   3
EFG        1                   4                 1                   2                   7
Total        6The results I get are multiple lines for each organisation, I would like to rollup these lines so I can have one line per organisation.
Hope this helps a bit more, I appreciate the help, let me know if you need more information
Thanks
Suzy

Small issue in Process Chain

Hi Dudes,
I have small problem in Process chain.
1)Start
2)Load :
3)activate : Always
when i ran my PC ,due to some problem my Load Process type got fail.
But after that i have actiavte Process type(PT) which should run whether Load PT is in success or fails .
But it got stuck due to message "Status Change of Process LOADING ZPAK_EFAJ6WFZPJPA7MWVSZXETN4PE.
Save Status and Trigger Events if Appropriate"
with two option yes and no.
when i click on yes then only it goes .
But if i would run and nobody around then i would gets stuck at that point only .
Is there any solution for that !!
Hope i m clear toexplain u my problem
every person will get the point
Gain Points

I do understand what u r saying.
But I have given an example. Why that message box comes.
Cant we suppress automatically?
Suppose had I been have a process type which send a mails after load status whether it fails or success at that point this could be an issue ??.
So if it would be stuck like this then it could not send a mail.
Hope u have understood my problem .
or if u want in detail give me ur id i send u screen shot
Gain Points

0P_FYEAR issue - Urgent - Please help

Hi,
We are developing six new BCS queries. We have already have about 30 reports.
1. We are using the Fiscal Year variable (0FISCYEAR) - 0P_FYEAR in most of the queries. In the new reports, particularly in one query, the previous year is not working with -1 offset value. but, the same variable is working in other new reports for previous year. Please help how to rectify the issue.
2. I have started trying many options in QA environment and found that there was a option to choose CONSTANT SELECTION in the 0FISCYEAR. So, I tried to select the Constant selection and found that the PREVIOUS YEAR IS WORKING for the query, for which earlier it was not working. Now, my another issue is that previous year is not working for all other queries which we have used the 0P_FYEAR as variable.
Since I have tried this in QA, all the reports in QA are not working for previuos year. Please advise urgently to correct the same.
Thanks & Regards,

Hi ,
Have you used Fiscal Yaer variant in your query?
When you use these variables you should restrict querieswith correct fiscal yaer Variant.
Jaya

Should I buy a new MBP? (Lots of small issues with mine)

Hi,
There are a number of small but irritating problems with my MBP. Talking with a friend who has had her macbook into apple service 3 times now for replacements a lot more serious than my problems, I'm sure Apple won't replace the computer. A friend who has bought a couple MBPs now (later week version) has had very little problem with his.
Specifically, the issues I'm having are as follows:
1) CPU whine (I know this can't be fixed)
2) Fan "moo"/clunk. The computer sounds like a small helicopter at times and at the best of times is always noisy..
3) Heat issues - using the comp anywhere but on a flat surface (i.e. on my lap) and it heats up intensely. I know this is an issue with all computers, but compared to my powerbook it's night and day.
4) Lag Issues. Doing ANYTHING takes a "long" time. I need to reformat but from opening firefox to booting up the computer or even sometimes mousing over the icon tray.
5) Red headphone led. My internal speakers no longer work. I've read the problem has something to do with the headphone jack being stuck. Some fixes I've read include using a match stick, plugging in the headphones again (doesn't work).
6) My display flickers slightly now also. Seems to synch with the fan "moo"ing.
I'm using macintosh now because I like avoiding hassles. I switched from PC a few years ago after going through lots of issues and the powerbook was AWESOME. I'm assuming the macbookpro is going to eventually stabilize and work well also, is it there yet? Shall I buy a new one and just dump the current or will it be the same thing all over?
Macbook Pro / 12" Powerbook Mac OS X (10.4.6)

Thanks for all the advice, it's appreciated. Particularly the advice to go down to the mac store and talk to a guru. I'm going to do that tomorrow.
I've been able to tolerate things up until the latest bug, the fan now periodically starts spinning like a helicopter. It's way beyond anything I've dealt with.. I can't listen to music it's so loud and it disturbs anyone else around (clearly needs a fix).
I can't send it in to be repaired as I can't do without a computer for that long. This said I thought to connect the new and old machine and copy the most important files over.
(No I won't dump this lemon on someone else without letting them know about the issues. It may well be worthwhile to someone willing to nurse it through the various mac warranty & update issues. Eventually they may well end up with a new MBP).
Macbook Pro / 12" Powerbook Mac OS X (10.4.6)
Macbook Pro / 12" Powerbook Mac OS X (10.4.6)

FCS2 "Something Happened" message at load, other upgrade issues URGENT

Final cut studio has been giving me a "Something Happened" message every time I load it since after I upgraded it. What is this?? It seemed at the time that the upgrade to FCP Studio 2 installation went well...no weird messages or anything.
I did the upgrade at the end of last year and Ive been using the software OK with three exceptions:
1.- The FCP "Something Happened" message always appears when the OS loads...
2.- The new COMPRESSOR wont load at all....ever! (I installed ALL upgrades frpom the web and ALSO downloaded the compressor upgrade (from Nov 07) and installed it "by hand", but to no avail.
4.- FCP cannot render exotic effects (For example the ones that work in Motion)Final Cut pro asks me to upgrade my graphics card from the old 60 mb NVIDIA GEFORCE that came with the first system to a larger one.
I just bought it through the net and it should be here in a couple of weeks. (I am in Nicaragua, Central America).
I dont know what to do about the compressor (I need it urgently but dont know how to uninstall and reinstall ONLY compressor).
My machine specs are
Model POWER MAC 7.2
CPU Power PC 970 (2.2)
2 CPU Units
Level 2 cache 512 KB
Memory 4 GB
Bus speed 1 GHZ
Start ROM version 5.1.5 F0
Serial G8429CVLPXD

Dear Jerry
Im very afraid of doing a full reinstall for a couple of reasons:
1.-We dont have a reliable and FCP-savy MAC techie in Nicaragua.
2.-I am not 100% sure I have ALL of the disks for all of the previous versions of the software
3.- There are a lot of other things on that drive that I am afraid of losing.
Do you have any other ideas??
Do you think issues will be resolved when the new video card comes??
Is there any way of installing (In the meantime) only the previous version of COMPRESSOR??
Thanks for any help-
Carlos
Tanks

Small issue in small program(code) that need to be fixed ...

Hi Guys ,
i need ur help in some kind of issue( technique thing ;) ). i have done small program that ask for numbers then print them and told u how many Odd numbers.
the issue that i have it, is that the program when print the result (the numbers) it print them correctly but print with them word "null".
i need ur help to avoid that word.
How???
sorry for my bad english, since i don't know english well.
and thank u soo much for ur help ;)
this is the code:-
import javax.swing.JOptionPane;
     // takes number from the user and show u the odd number and print them
public class Odd {
     public static void main(String[] args) {
          String n,m;
          int a=0;
          int x=1;
          String result = null;
          n=JOptionPane.showInputDialog(null,"How many number do you want to check for the odd ? ");
          int n1 = Integer.parseInt(n);
          int array[]=new int[n1];
          for(int i=0;i<array.length;i++){
               m=JOptionPane.showInputDialog(null,"Enter number "+x);
               array[i] = Integer.parseInt(m);
               result=result+array[i]+"\n";
               x++;
               if( array%2 !=0 )
                    a++;
               JOptionPane.showMessageDialog(null,"The Numbers Are :\n"+ result);
               JOptionPane.showMessageDialog(null,"The Odd Numbers are:\n " a" Numbers");

First of all you don't need to feel yourself sorry. Here is a Java forum not an english literature forum and at least I can understand you. At least you don't try to write in your language which we probably may not understand.
Secondly if you initialize your String value like that you have the null value. You can initialize it like
String result = new String(); and try it again.

[JPF/NetUI]NetUI tree issue---Urgent

Gurus, :)
I had an issue when i used the NetUI true in my project(on Weblogic10gR3), when i keep clicking the netUI tree,
i got a message in the jsp: PageFlow /Controller.jpf: Could not find exception handler method <b>handleException</b>.; but actually i have an exception handler for the SocketException called handleSocketException, and there is also an exception handler method called handleException. weird weird.. ;)
In the Log, there was an exception thrown:
com.cup.service.jpf.ServiceController - Service Management SocketError
java.net.SocketException: Connection reset by peer: socket write error
     at java.net.SocketOutputStream.socketWrite0(Native Method)
     at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
     at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
     at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:525)
     at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:504)
     at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:382)
     at weblogic.servlet.internal.CharsetChunkOutput.flush(CharsetChunkOutput.java:249)
     at weblogic.servlet.internal.ChunkOutput.checkForFlush(ChunkOutput.java:469)
     at weblogic.servlet.internal.CharsetChunkOutput.write(CharsetChunkOutput.java:326)
     at weblogic.servlet.internal.CharsetChunkOutput.print(CharsetChunkOutput.java:233)
     at weblogic.servlet.internal.ChunkOutputWrapper.print(ChunkOutputWrapper.java:153)
     at weblogic.servlet.jsp.JspWriterImpl.print(JspWriterImpl.java:176)
     at org.apache.beehive.netui.tags.AbstractSimpleTag.write(AbstractSimpleTag.java:152)
     at org.apache.beehive.netui.tags.tree.Tree.doTag(Tree.java:936)
     at jsp_servlet._com._cup._soa._catweb._service._jpf.__index._jspService(__index.java:333)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:385)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:503)
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:251)
     at org.apache.beehive.netui.pageflow.internal.DefaultForwardRedirectHandler.forward(DefaultForwardRedirectHandler.java:128)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.doForward(PageFlowRequestProcessor.java:1801)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processForwardConfig(PageFlowRequestProcessor.java:1674)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:241)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
     at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
     at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.cup.filter.LoginFilter.doFilter(LoginFilter.java:50)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
the class marked as bold is a filter in which i checked if the netUI tree is emplty, and the logic in the LoginFilter.java:50 is only : chain.doFilter(request, response);
it seems that a socket exception is thrown with no reason, is it a NetUI issue????
It's really urgent, could someone help me with that? ;)
Thanks a lot!!!!!
Edited by: Xu Wen on Sep 3, 2009 8:26 PM
Edited by: Xu Wen on Sep 3, 2009 10:23 PM
Edited by: Xu Wen on Sep 3, 2009 11:17 PM

deepak,
Sorry for replying your post so late as i am just back from my vacation. the entire thing is as follows:
2009-09-16 14:30:45,546 ERROR [[ACTIVE] ExecuteThread: '21' for queue: 'weblogic.kernel.Default (self-tuning)'] com.cup.soa.catweb.service.jpf.ServiceController - Service Management SocketError
java.net.SocketException: Software caused connection abort: socket write error
     at java.net.SocketOutputStream.socketWrite0(Native Method)
     at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
     at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
     at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:525)
     at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:504)
     at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:382)
     at weblogic.servlet.internal.CharsetChunkOutput.flush(CharsetChunkOutput.java:249)
     at weblogic.servlet.internal.ChunkOutput.checkForFlush(ChunkOutput.java:469)
     at weblogic.servlet.internal.CharsetChunkOutput.write(CharsetChunkOutput.java:326)
     at weblogic.servlet.internal.CharsetChunkOutput.print(CharsetChunkOutput.java:233)
     at weblogic.servlet.internal.ChunkOutputWrapper.print(ChunkOutputWrapper.java:153)
     at weblogic.servlet.jsp.JspWriterImpl.print(JspWriterImpl.java:176)
     at org.apache.beehive.netui.tags.AbstractSimpleTag.write(AbstractSimpleTag.java:152)
     at org.apache.beehive.netui.tags.tree.Tree.doTag(Tree.java:936)
     at jsp_servlet._com._cup._soa._catweb._service._jpf.__index._jspService(__index.java:338)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:385)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:503)
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:251)
     at org.apache.beehive.netui.pageflow.internal.DefaultForwardRedirectHandler.forward(DefaultForwardRedirectHandler.java:128)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.doForward(PageFlowRequestProcessor.java:1801)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processForwardConfig(PageFlowRequestProcessor.java:1674)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:241)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
     at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
     at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.cup.soa.catweb.filter.LoginFilter.doFilter(LoginFilter.java:50)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
2009-09-16 14:30:48,000 ERROR [[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] com.cup.soa.catweb.service.jpf.ServiceController - Service Management SocketError
java.net.SocketException: Connection reset by peer: socket write error
     at java.net.SocketOutputStream.socketWrite0(Native Method)
     at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
     at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
     at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:525)
     at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:504)
     at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:382)
     at weblogic.servlet.internal.CharsetChunkOutput.flush(CharsetChunkOutput.java:249)
     at weblogic.servlet.internal.ChunkOutput.checkForFlush(ChunkOutput.java:469)
     at weblogic.servlet.internal.CharsetChunkOutput.write(CharsetChunkOutput.java:326)
     at weblogic.servlet.internal.CharsetChunkOutput.print(CharsetChunkOutput.java:233)
     at weblogic.servlet.internal.ChunkOutputWrapper.print(ChunkOutputWrapper.java:153)
     at weblogic.servlet.jsp.JspWriterImpl.print(JspWriterImpl.java:176)
     at org.apache.beehive.netui.tags.AbstractSimpleTag.write(AbstractSimpleTag.java:152)
     at org.apache.beehive.netui.tags.tree.Tree.doTag(Tree.java:936)
     at jsp_servlet._com._cup._soa._catweb._service._jpf.__index._jspService(__index.java:338)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:385)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:503)
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:251)
     at org.apache.beehive.netui.pageflow.internal.DefaultForwardRedirectHandler.forward(DefaultForwardRedirectHandler.java:128)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.doForward(PageFlowRequestProcessor.java:1801)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processForwardConfig(PageFlowRequestProcessor.java:1674)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:241)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
     at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
     at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.cup.soa.catweb.filter.LoginFilter.doFilter(LoginFilter.java:50)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
2009-09-16 14:30:48,921 ERROR [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] com.cup.soa.catweb.service.jpf.ServiceController - Service Management SocketError
java.net.SocketException: Software caused connection abort: socket write error
     at java.net.SocketOutputStream.socketWrite0(Native Method)
     at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
     at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
     at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:525)
     at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:504)
     at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:382)
     at weblogic.servlet.internal.CharsetChunkOutput.flush(CharsetChunkOutput.java:249)
     at weblogic.servlet.internal.ChunkOutput.checkForFlush(ChunkOutput.java:469)
     at weblogic.servlet.internal.CharsetChunkOutput.write(CharsetChunkOutput.java:326)
     at weblogic.servlet.internal.CharsetChunkOutput.print(CharsetChunkOutput.java:233)
     at weblogic.servlet.internal.ChunkOutputWrapper.print(ChunkOutputWrapper.java:153)
     at weblogic.servlet.jsp.JspWriterImpl.print(JspWriterImpl.java:176)
     at org.apache.beehive.netui.tags.AbstractSimpleTag.write(AbstractSimpleTag.java:152)
     at org.apache.beehive.netui.tags.tree.Tree.doTag(Tree.java:936)
     at jsp_servlet._com._cup._soa._catweb._service._jpf.__index._jspService(__index.java:338)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:385)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:503)
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:251)
     at org.apache.beehive.netui.pageflow.internal.DefaultForwardRedirectHandler.forward(DefaultForwardRedirectHandler.java:128)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.doForward(PageFlowRequestProcessor.java:1801)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processForwardConfig(PageFlowRequestProcessor.java:1674)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:241)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
     at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
     at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.cup.soa.catweb.filter.LoginFilter.doFilter(LoginFilter.java:50)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
2009-09-16 14:30:49,062 ERROR [[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'] com.cup.soa.catweb.service.jpf.ServiceController - Service Management SocketError
java.net.SocketException: Connection reset by peer: socket write error
     at java.net.SocketOutputStream.socketWrite0(Native Method)
     at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
     at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
     at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:525)
     at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:504)
     at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:382)
     at weblogic.servlet.internal.CharsetChunkOutput.flush(CharsetChunkOutput.java:249)
     at weblogic.servlet.internal.ChunkOutput.checkForFlush(ChunkOutput.java:469)
     at weblogic.servlet.internal.CharsetChunkOutput.write(CharsetChunkOutput.java:326)
     at weblogic.servlet.internal.CharsetChunkOutput.print(CharsetChunkOutput.java:233)
     at weblogic.servlet.internal.ChunkOutputWrapper.print(ChunkOutputWrapper.java:153)
     at weblogic.servlet.jsp.JspWriterImpl.print(JspWriterImpl.java:176)
     at org.apache.beehive.netui.tags.AbstractSimpleTag.write(AbstractSimpleTag.java:152)
     at org.apache.beehive.netui.tags.tree.Tree.doTag(Tree.java:936)
     at jsp_servlet._com._cup._soa._catweb._service._jpf.__index._jspService(__index.java:338)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:385)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:503)
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:251)
     at org.apache.beehive.netui.pageflow.internal.DefaultForwardRedirectHandler.forward(DefaultForwardRedirectHandler.java:128)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.doForward(PageFlowRequestProcessor.java:1801)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processForwardConfig(PageFlowRequestProcessor.java:1674)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:241)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
     at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
     at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.cup.soa.catweb.filter.LoginFilter.doFilter(LoginFilter.java:50)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Still the message saying handleException is not found . (Weird)
Any idea what's wrong??
Thanks a lot
Regards,
Wen
Edited by: Xu Wen on Sep 21, 2009 2:00 AM

A small issue / Urgent

Similar Messages

Maybe you are looking for