A small issue

Near as I can tell I lost the repeat key function when I upgraded to Mavericks. Anyone else have this problem or is it just me?

McGreggor,
Mine works...I presume you have checked System Preferences...>Keyboard>Keyboard?
If so, make some changes to Key Repeat/Delay Until Repeat, log out/in or restart and try to set your desired repeat settings.

Similar Messages

Just three small issue...

Hello All,
Well after a few months of delay (First me damaging the bois chip then me burning out the motherboard) I finally got my computer up and running. I do have some small issues that I hope someone may be able to help me with.
1.   When I shut down the computer it restarts itself. The only way I can shut it down is to hit the power button in the back of the case.
2.   When I do attempt to shut down the computer and it restart on it’s own I get no video. It also gives three long beeps. Now please understand that the video card works fine when the computer is on or when I do a manual restart. This only happens when I try to shut down the computer.
3.   When I try to use the RAID by plugging up two hard drives the computer well get stuck at the screen where it read the array configuration. The configuration can be correct with the RAID set for stripe two (WD 13GB and a WD 7GB hard drive) Western Digital hard drive’s.
Any type of help would be great. Here are the specs to my computer.
KT3 Ultra2-R
AMD 2100+ XP
512MD DDRAM
WD 20GB
Goldstar 40x12x40
Acer 52x CD-Rom
Jaton Geforce 2 MX/MX 400

wd also have funny jumperless master with no slave setting
normal master only if it has a slave
why raid none matching drives
a stripe will only be 2x smallest and a mirror size of the smallest

Small issue in Business Rules

Dear All
i have a Business Rule callingin BPEL Process based on below XSD file
<?xml version="1.0" encoding="windows-1256" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.bank.com/bankbpel"
targetNamespace="http://www.bank.com/bankbpel"
elementFormDefault="qualified">
<xsd:complexType name="Client-BR-Input-Type">
<xsd:sequence>
<xsd:element name="Status" type="xsd:string"/>
<xsd:element name="is-VIP" type="xsd:string"/>
<xsd:element name="Start-Date" type="xsd:date"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="Degree" type="Degree-Type"/>
<xsd:element name="Client-BR-Input" type="Client-BR-Input-Type"/>
<xsd:complexType name="Degree-Type">
<xsd:sequence>
<xsd:element name="Degree" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
after finishing my rules and decisions, i dropped Business Rule inside BPEL and start to copy values in input parameters of Business Rule, but i face *"Exception - Problem Building Schema !" !!*
and sure my problem now in XSD file, please advise why and how to avoid ? ..

Dear All
Resolved, it is a small issue as i expected, i forget to update in/out variables to map for elements in XSD file like below ..
<variables>
<variable name="dsIn"
element="client:Client-BR-Input"/>
<variable name="dsOut"
element="client:Degree"/>
</variables>
thanks

Two small issues switching from Leopard to Snow Leopard

Hi,
I just recently switched to Snow Leopard from Leopard. I was considering Lion, but heard some bad things about it.
Either way, I noticed two small issues. The first was a hot key set on my Logitech mouse. I had a button preset to all windows expose. In the software
for the mouse driver you can set it to expose specifically. (Its not just setting it to a certain F key). For some reason this doesn't work anymore.
The other problem is when I link my mac book pro to an external monitor thru an hdmi cable, I notice on the tv screen it reverts back to the default
desktop background. Instead of having the picture I set, it shows up on the big screen the blue and purple space image.
Any suggestions?
Thanks

Thanks for the reply,
The Logitech mouse driver said there were no updates available so I figured the expose had something to do
with the new OS system since it now said expose and spaces, which Leopard never had spaces.
So what I did was figured out how to just set it up with the F keystroke and it worked!
When I link my Mac Book Pro to my tv, I use an external keyboard which is more up to date with the quick f keys up top and the arrangement is set up differently [ such as the volume keys are now f 10 and 11 instead of f 3 and 4 or something like that] Hopefully when my mbp is linked to this the keystroke I have set for expose still works. I believe it will.
And as for the desktop bg, after unplugging my tv I notcied it still stayed on the space theme. So I believe I know what may be the issue. I set that bg off of a picture on an external hd, and never saved the image on my computer hd. So I'm assuming it saved the desktop picture in some cache thing or something and once it got linked to an external monitor it got refreshed.
I now how that image on my computer and set, so hopefully the next time I link my computer to the tv, it'll stay.
Thanks!

Help on small issues after WinXP downgrade from Vista

Lenovo 3000 v200
I recently downgraded from Vista to WinXP Professional, and I must say I'm much happier with XP.
Some issues on the install: although I downloaded all drivers from the Lenovo site, the install didn't work from my usb floppy drive.
It recognized the floppy on the F6 portion of the install, but then later it kept asking for the disk to be inserted (it was already in the drive). Workaround was to install by changing to "compatibility mode" in the BIOS, and after install, loading all drivers and changing BIOS back to SATA.
All features of the laptop appear to work perfectly; camera, fingerprint reader, wifi, etc.
HOWEVER: in the device manager, there are 3 yellow exclamation points in the "Other Devices" section, and each of them is labeled "Base System Device." Does anyone know what these are? Why are they not recognized as specific devices? LenovoCare doesn't recognize them either, and I have no idea what drivers to attempt to install for mystery devices.
Also, "Modem Device on High Definition Audio Bus" won't install. I have the current driver, and I've tried updating from LenovoCare, but no luck. As I don't use a modem, this seems irrelevant, but I'd like to install it just the same if possible.
Finally, the LenovoCare recognized a need to install a "Hotkey" update, and it claims to successfully install, but everytime I run LenovoCare it says I need it again. Any comments or observations?
Again, the computer works just fine even with these small issues. In fact, it is better than fine; it is a joy to use and a real speed demon with XP instead of Vista. So I'm not trying to do any rocket science or potentially screw up a very nice situation, but I am trying to iron out these small nuisances.
Thanks to all of you who consider my trivial problems. I really appreciate having knowledgable individuals like yourselves help out a very modestly skilled, but reasonably ambitious user.
Cheers,
Fred

Hello Fred,
I created a blog on this forum called.... "I Explain How To Downgrade From Vista To XP Successfully On A 3000 N100 Laptop" Locate this message and read through it. Try the "Auto Detect This System" I Talk about. It will load the latest drivers and the latest...BIOS..... for your particular model if you have not already upgraded it. You did not mention if you had upgraded your BIOS...... if your running an "OLD" version.... THIS..... could be your problem.
Regards

Some UI papercuts and smaller issues

The CS6 Beta, while generally awesome and full of plenty of new things, has plenty of smaller issues too. I know and understand that this is pre-release software, however I fear that some of these might be missed on release which would mean that they would never get fixed. Just personal experience with big software companies, nothing personal.
So here are just some that quickly caught my attention:
Hex field in color picker, while extremely useful, is awkwardly sized (especially as Hex values are only 3 or 6 symols long)
Ruler tool would greatly benefit from the info tooltips introduced for the Selection and Move tools. Same would probably apply to the Eyedropper tool.
Clicking on a shape layer's thumbnail no longer hides the shape's outline (I know that there's a global setting for this, but I heard some people disappointed with this on Twitter)
Combining of all Workspace layouts into one dropdown menu. I personally loved the rapid switching possibility provided by the button layout in CS5.
Additionally, I noticed a rather annoying bug with Type tool: Activating a text layer with the Type tool doesn't update the information in the toolbar nor in Characters panel (try it with two differently-styled text layers — the information for the old one is still displayed even though the new one is active).

magnet14 wrote:
Additionally, I noticed a rather annoying bug with Type tool: Activating a text layer with the Type tool doesn't update the information in the toolbar nor in Characters panel (try it with two differently-styled text layers — the information for the old one is still displayed even though the new one is active).
I can't reproduce that.
Here's what I did:
1. Create two different text layers, with different fonts, different colors, different sizes.
2. Click on the T in the Tools Panel to activate the Horizontal Type Tool.
3. Now if I click on each layer all of the things you mention are updated with info from that layer.
-Noel

A few small issues I can't find fixes for

Hi everyone, I've been using arch for a little bit now and really enjoying the experience. I have run across 3 small problems and other than that everything thing seems to be running flawlessly. I'd appreciate any help with these, and thanks in advance. I have googled trying to find solutions and searched the wiki but either none of the issues were listed or the fixes for them didn't seem to have an effect, but if I missed something sorry, just if you want to point me in the right direction that'd be appreciated.
So some specifics about my system first, I'm running on arch linux 64bit using KDE as my desktop environment.
Okay so problem number 1:
Sometimes when arch goes to boot it fails to mount /dev/sda2 which is my root partition, This doesn't happen everytime but I'd say 50 or 60 percent of the time, but when it does I give it a restart once or twice and it loads into arch just fine. I can restart my computer if anyone wants the exact wording I get, but it goes along the lines of "failed to mount /dev/sda2 you are now being dropped in to a recovery shell" Now I'm not sure but this might be because of the weird way I set the harddrive partitions up, but it worked in all the distros I used before settling on arch, but to give you an idea, I'm using 2 300gb hard drives, I have them split so that 1 hard drive is completely devoted to my / and /boot partitions, the other one has /usr /tmp /var and swap on it. In addition I have a 1tb drive for storage that is devoted to /home. If it is causing the problem and I have to reformat and go to a more conventional partition scheme I will, but I'd prefer to avoid that if at all possible, just because I am rather settled in to this install.
Problem number 2:
Amarok takes forever and a day to load, somewhere in the area of 60+ seconds, when I start it via the terminal I get this output:
KGlobal::locale::Warning your global KLocale is being recreated with a valid main component instead of a fake component, this usually means you tried to call i18n related functions before your main component was created. You should not do that since it most likely will not work
(amarok:19322): GStreamer-CRITICAL **: gst_debug_add_log_function: assertion `func != NULL' failed
amarok(19322)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
amarok(19322)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
amarok(19322)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
amarok(19322)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
amarok(19322)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
amarok(19322)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0)
amarok(19322)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0)
amarok(19322)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0)
amarok(19322)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0)
amarok(19322)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "Amarok Script Console"
amarok(19322)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "LyricWiki"
amarok(19322)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "Cool Streams"
amarok(19322)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "Librivox.org"
** AMAROK WAS STARTED IN NORMAL MODE. IF YOU WANT TO SEE DEBUGGING INFORMATION, PLEASE USE: **
** amarok --debug **
I thought maybe it was the gstreamer backend because the wiki said it might cause problems and to try using xine instead. However doing this didn't seem to help at all.
Problem number 3
Flash is all weird when I use Kwin, when I use compiz it works near flawlessly but my issue with that is then kde doesn't act nearly as smooth as it does without compiz. When I use flashplugin from the repos I can't go fullscreen because it makes everything freeze up, and when I try flashplugin-prerelease from the aur flash is always in the spot where it loaded meaning if I change tabs in firefox it goes through the other tab and if I scroll it stays stationary and everything else scrolls behind it.
Again I apologize if I missed it in the searches that I ran and these have been solved elsewhere, but thanks in advance for all help given.
Edit: Installing pulseaudio and using that instead of alsa seems to have fixed amarok starting slowly.
Last edited by Sinner (2011-03-26 05:05:57)

milomouse wrote:Maybe you should use UUIDs instead of /dev/sd* to avoid any possible device confusion (type 'blkid' to see your UUIDs), though from your first post about "cannot mount /dev/sda2" it still appears to check for root device correctly. At any rate, in your grub or lilo or syslinux (whatever bootloader you have) config you could also change root=/dev/sda2 to root=/dev/disk/by-uuid/YOURROOTUUID (however your bootloader can handle it) to help further reduce possible errors. (helpful link: https://wiki.archlinux.org/index.php/Pe … ice_naming ) Trying to think of what else it could be since it only happens every now and then, which is a little strange.
Oh my bad I forgot to say I'm using grub, but yeah I went through and did that, That seemed to stop me being loaded into a recovery shell or whatever, but when arch started to boot about 2 out of the 5 times I restarted to test it, it said file systems didn't check and had my log in as root to try to remount the partition. Also I got a COMERROR=-32 after which it said it was doing a comreset and would retry in 8 seconds after doing that 3 times it booted almost every time unless it ran into the filesystem check.
Last edited by Sinner (2011-03-25 16:29:32)

Small issue in Process Chain

Hi Dudes,
I have small problem in Process chain.
1)Start
2)Load :
3)activate : Always
when i ran my PC ,due to some problem my Load Process type got fail.
But after that i have actiavte Process type(PT) which should run whether Load PT is in success or fails .
But it got stuck due to message "Status Change of Process LOADING ZPAK_EFAJ6WFZPJPA7MWVSZXETN4PE.
Save Status and Trigger Events if Appropriate"
with two option yes and no.
when i click on yes then only it goes .
But if i would run and nobody around then i would gets stuck at that point only .
Is there any solution for that !!
Hope i m clear toexplain u my problem
every person will get the point
Gain Points

I do understand what u r saying.
But I have given an example. Why that message box comes.
Cant we suppress automatically?
Suppose had I been have a process type which send a mails after load status whether it fails or success at that point this could be an issue ??.
So if it would be stuck like this then it could not send a mail.
Hope u have understood my problem .
or if u want in detail give me ur id i send u screen shot
Gain Points

Should I buy a new MBP? (Lots of small issues with mine)

Hi,
There are a number of small but irritating problems with my MBP. Talking with a friend who has had her macbook into apple service 3 times now for replacements a lot more serious than my problems, I'm sure Apple won't replace the computer. A friend who has bought a couple MBPs now (later week version) has had very little problem with his.
Specifically, the issues I'm having are as follows:
1) CPU whine (I know this can't be fixed)
2) Fan "moo"/clunk. The computer sounds like a small helicopter at times and at the best of times is always noisy..
3) Heat issues - using the comp anywhere but on a flat surface (i.e. on my lap) and it heats up intensely. I know this is an issue with all computers, but compared to my powerbook it's night and day.
4) Lag Issues. Doing ANYTHING takes a "long" time. I need to reformat but from opening firefox to booting up the computer or even sometimes mousing over the icon tray.
5) Red headphone led. My internal speakers no longer work. I've read the problem has something to do with the headphone jack being stuck. Some fixes I've read include using a match stick, plugging in the headphones again (doesn't work).
6) My display flickers slightly now also. Seems to synch with the fan "moo"ing.
I'm using macintosh now because I like avoiding hassles. I switched from PC a few years ago after going through lots of issues and the powerbook was AWESOME. I'm assuming the macbookpro is going to eventually stabilize and work well also, is it there yet? Shall I buy a new one and just dump the current or will it be the same thing all over?
Macbook Pro / 12" Powerbook Mac OS X (10.4.6)

Thanks for all the advice, it's appreciated. Particularly the advice to go down to the mac store and talk to a guru. I'm going to do that tomorrow.
I've been able to tolerate things up until the latest bug, the fan now periodically starts spinning like a helicopter. It's way beyond anything I've dealt with.. I can't listen to music it's so loud and it disturbs anyone else around (clearly needs a fix).
I can't send it in to be repaired as I can't do without a computer for that long. This said I thought to connect the new and old machine and copy the most important files over.
(No I won't dump this lemon on someone else without letting them know about the issues. It may well be worthwhile to someone willing to nurse it through the various mac warranty & update issues. Eventually they may well end up with a new MBP).
Macbook Pro / 12" Powerbook Mac OS X (10.4.6)
Macbook Pro / 12" Powerbook Mac OS X (10.4.6)

Small issue in small program(code) that need to be fixed ...

Hi Guys ,
i need ur help in some kind of issue( technique thing ;) ). i have done small program that ask for numbers then print them and told u how many Odd numbers.
the issue that i have it, is that the program when print the result (the numbers) it print them correctly but print with them word "null".
i need ur help to avoid that word.
How???
sorry for my bad english, since i don't know english well.
and thank u soo much for ur help ;)
this is the code:-
import javax.swing.JOptionPane;
     // takes number from the user and show u the odd number and print them
public class Odd {
     public static void main(String[] args) {
          String n,m;
          int a=0;
          int x=1;
          String result = null;
          n=JOptionPane.showInputDialog(null,"How many number do you want to check for the odd ? ");
          int n1 = Integer.parseInt(n);
          int array[]=new int[n1];
          for(int i=0;i<array.length;i++){
               m=JOptionPane.showInputDialog(null,"Enter number "+x);
               array[i] = Integer.parseInt(m);
               result=result+array[i]+"\n";
               x++;
               if( array%2 !=0 )
                    a++;
               JOptionPane.showMessageDialog(null,"The Numbers Are :\n"+ result);
               JOptionPane.showMessageDialog(null,"The Odd Numbers are:\n " a" Numbers");

First of all you don't need to feel yourself sorry. Here is a Java forum not an english literature forum and at least I can understand you. At least you don't try to write in your language which we probably may not understand.
Secondly if you initialize your String value like that you have the null value. You can initialize it like
String result = new String(); and try it again.

Small issues with iOS4, and iOS4.0.1 update

Hello all, I'm posting this as a general area where those using iOS4 / iOS4.0.1 on iPhone 3GS and iPhone 4 ca report any little niggles they've noticed with the most recent updates.
As I'm quite fond of my gadget, and it would be rare to see me glued to anything else, I've noticed a few. So I created this feed to show others these problems, at least to stop some worrying that its just their phone!
This is what I've found thus far:
(1) Firstly, the screen magnification function no longer works. I noticed this on the Messages application. If the 'lens' is active on the screen, with the usual prolonged hold on the screen, the entire thing is white. The same white as behind the message bubbles, wherever on the screen you hold the lens. The only thing you might see is the blue flashing place marker, which itself is not magnified either.
There is obviously some glitch that stops magnification and display within the lens. I use a 3GS, and have looked at 2 other iPhone's, a likewise 3GS and an older 3G both using the first iOS4 update.
(2) Next, I noticed some keyboards were not aligning to the crrect rotations on some third-party applications. When in portrait, if the keyboard is activated and then the phone is rotated, the narrow keyboard is displayed on the far left of the screen, in place of the wider landscape pad. The same is true, in reverse, if the phone is rotated from landscape when the keypad is activated.
(3) One other issue is that some of the text alignment can be off, resulting in images and text and symbols being misplaced. I noticed this on the iPod application, on some music videos the small TV icon Apple uses for denoting videos is halfway across the screen, and the name is pushed away from the track numbering column.
These are the issues I've seen so far. This is not me complaining, it is just a place where fellow users to report issues they've noticed and make others aware.
I don't know if this has been done, and even if it has, its good to have a new comprehensive and up-to-date list.
I would be interested to see what other issues users have encountered so please share. Any issues at all.
I have some screenshot images of the problems I've listed should anyone wish to see what I mean, sadly images cant be uploaded on this forum.

*BUMP* Does anyone have any ideas? Or has anyone managed to fix this problem for themselves?

MSI GX630 Small issues

Hey guys,
So I have a MSI GX630. I love this laptop. Its been amazing to me for the month I have had it. I just have a small question.
My problem is that I am having issues playing league of legends. I don't have problems playing any other games at all! I just started playing Kingdom of Amalur: Reckoning and it plays flawlessly!!!! But for some reason League of legends does not like my laptop. I get FPS drops even though the graphics requirements are way low. Even if I drop my settings in game down to low it still happens. I have read that League has issues with AMD processors and there timing issues. I have installed AMD CPU fix that is SUPPOSED to help with the timing issues. But it did not help. I tried setting the affinity of the game to run off of one processor but that did not do it. Does anyone have any ideas what would fix this? I have most recent BIOS and NVIDIA drivers installed. Any ideas? Thanks in advance guys!

ask support of this game

Table control small Issues , Plz help in tracing the problem

Hello John , Rich , Anand & all
My sorting is working fine but thr is small problem
1. user has habit of pressing enter after everything,
    after entering the values in editable fields in Table control , it doesnt retain the entered values but if he presses save button immediately after entering values , it saves .
how 2 hold the values after pressing enter button
2. Now with this code , it saves the table control content but doesnt display the latest values immediately on the screen .
3. User doesnt want to press SAVE button , he wants save the Table control content by pressing ENTER button,
What is the OK_CODE value for Enter Button plz ?
Plllllzzzzz help me for god sake ASAP.
<u><b>Everyone whoever make an attempt is going to get 10 pnts.</b></u>
==========================
FLOW Logic
PROCESS BEFORE OUTPUT.
MODULE SET_STATUS.
LOOP AT ITAB
WITH CONTROL TCL1
CURSOR TCL1-CURRENT_LINE .
MODULE SET_LINE_COUNT .
ENDLOOP.
PROCESS AFTER INPUT.
MODULE GET_OK_CODE .
MODULE EXIT_COMAND AT EXIT-COMMAND.
MODULE SCROLL_SORT.
LOOP AT ITAB.
MODULE UPDATE_MOD.
ENDLOOP.
==========================
REPORT ZSD_REP_ORDER_BANK_CHANGE NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES: VBAK,VBAP,VBRK,ZSD_TABL_ORDBANK,MARA,KONV.
CONTROLS: TCL1 TYPE TABLEVIEW USING SCREEN 0200.
DATA: ITAB LIKE ZSD_TABL_ORDBANK OCCURS 0 WITH HEADER LINE,
      WA_ITAB LIKE ZSD_TABL_ORDBANK,
      OK_CODE LIKE SY-UCOMM,
      SAVE_OK_CODE LIKE SY-UCOMM,
      UPD_OK_CODE LIKE SY-UCOMM,
      ANSWER TYPE C,
      I LIKE SY-LOOPC ,
      J LIKE SY-LOOPC,
      V_LINES LIKE SY-LOOPC,
      LINE_COUNT LIKE SY-LOOPC,
      STS TYPE N,
      EMGRP LIKE MARA-EXTWG,
      QTY LIKE ZSD_TABL_ORDBANK-QTY,
      UPRICE LIKE ZSD_TABL_ORDBANK-UPRICE,
      TOT LIKE ZSD_TABL_ORDBANK-TOT,
      INO LIKE VBAP-POSNR,
      COL TYPE CXTAB_COLUMN,
      COPIED_ONCE ,
      FLDNAME(100),HELP(100).
FIELD-SYMBOLS:
     <FS_ITAB> LIKE LINE OF ITAB,
     <FS_TCL1> LIKE LINE OF TCL1-COLS.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS: S_CCODE FOR ZSD_TABL_ORDBANK-CCODE
                          NO INTERVALS NO-EXTENSION OBLIGATORY,
                  S_SORG FOR ZSD_TABL_ORDBANK-SORG
                          NO INTERVALS NO-EXTENSION OBLIGATORY,
                  S_DCHAN FOR ZSD_TABL_ORDBANK-DISTCHAN,
                  S_DIV FOR ZSD_TABL_ORDBANK-DIV,
                  S_MATNO FOR ZSD_TABL_ORDBANK-MATNO,
                  S_CUSTNO FOR ZSD_TABL_ORDBANK-CUSTNO ,
                  S_QTNO FOR ZSD_TABL_ORDBANK-QTNO,
                  S_QTDAT FOR ZSD_TABL_ORDBANK-QTDAT,
                  S_QTVDAT FOR ZSD_TABL_ORDBANK-QTVALDAT,
                  S_SONO   FOR ZSD_TABL_ORDBANK-SONO.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN.
   SELECT * FROM ZSD_TABL_ORDBANK
               INTO TABLE ITAB
               WHERE CCODE IN S_CCODE
                 AND SORG IN S_SORG
                 AND DISTCHAN IN S_DCHAN
                 AND DIV IN S_DIV
                 AND MATNO IN S_MATNO
                 AND CUSTNO IN S_CUSTNO
                 AND QTNO IN S_QTNO
                 AND QTDAT IN S_QTDAT
                 AND QTVALDAT IN S_QTVDAT
                 AND SONO IN S_SONO .
      IF SY-SUBRC EQ 0.
         REFRESH ITAB.
         CLEAR COPIED_ONCE.
         CALL SCREEN 0200.
      ELSE.
         MESSAGE E012(ZQOTBANK) .
      ENDIF.
*&      Module SET_STATUS OUTPUT
      text
MODULE SET_STATUS OUTPUT.
SET PF-STATUS '0200'.
SET TITLEBAR '0200'.
    IF COPIED_ONCE IS INITIAL.
      SELECT * FROM ZSD_TABL_ORDBANK
               INTO TABLE ITAB
               WHERE CCODE IN S_CCODE
                 AND SORG IN S_SORG
                 AND DISTCHAN IN S_DCHAN
                 AND DIV IN S_DIV
                 AND MATNO IN S_MATNO
                 AND CUSTNO IN S_CUSTNO
                 AND QTNO IN S_QTNO
                 AND QTDAT IN S_QTDAT
                 AND QTVALDAT IN S_QTVDAT
                 AND SONO IN S_SONO .
      IF SY-SUBRC EQ 0.
        DESCRIBE TABLE ITAB LINES V_LINES.
        TCL1-LINES = V_LINES.
      ENDIF.
      COPIED_ONCE = 'X'.
      REFRESH CONTROL 'TCL1' FROM SCREEN '0200'.
   ENDIF.
      LOOP AT ITAB.
         QTY = ITAB-QTY.
         UPRICE = ITAB-UPRICE.
         TOT = QTY * UPRICE .
         ITAB-TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-CGL_QTY.
         UPRICE = ITAB-CGL_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-CGL_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-BHEL_QTY.
         UPRICE = ITAB-BHEL_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-BHEL_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-ALSTOM_QTY.
         UPRICE = ITAB-ALSTOM_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-ALSTOM_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-SIEMENS_QTY.
         UPRICE = ITAB-SIEMENS_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-SIEMENS_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-TELK_QTY.
         UPRICE = ITAB-TELK_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-TELK_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         QTY = ITAB-OTH_QTY.
         UPRICE = ITAB-OTH_UPRICE.
         TOT = QTY * UPRICE .
         ITAB-OTH_TOT = TOT .
         CLEAR: QTY, UPRICE, TOT.
         MODIFY ITAB.
      ENDLOOP.
ENDMODULE.                 " SET_STATUS OUTPUT
*&      Module SET_LINE_COUNT INPUT
      text
MODULE SET_LINE_COUNT OUTPUT.
LINE_COUNT = SY-LOOPC.
ENDMODULE.                 " SET_LINE_COUNT INPUT
*&      Module GET_OK_CODE INPUT
      text
MODULE GET_OK_CODE INPUT.
IF OK_CODE = 'SAVE'.
     UPD_OK_CODE = OK_CODE.
ENDIF.
ENDMODULE.                 " GET_OK_CODE INPUT
*&      Module EXIT_COMAND INPUT
      text
MODULE EXIT_COMAND INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
    WHEN 'BACK'.
      CALL FUNCTION 'POPUP_TO_CONFIRM'
        EXPORTING
          TITLEBAR       = 'Order Bank Entry'
          TEXT_QUESTION = 'Do you want to Go BacK ?'
          TEXT_BUTTON_1 = 'Yes'
          TEXT_BUTTON_2 = 'No'
          DEFAULT_BUTTON = '2'
        IMPORTING
          ANSWER         = ANSWER.
      IF ANSWER = '1'.
        LEAVE TO SCREEN 0.
      ELSE.
      ENDIF.
    WHEN '%EX'.
      CALL FUNCTION 'POPUP_TO_CONFIRM'
        EXPORTING
          TITLEBAR       = 'Order Bank Entry'
          TEXT_QUESTION = 'Do you want to Exit ?'
          TEXT_BUTTON_1 = 'Yes'
          TEXT_BUTTON_2 = 'No'
          DEFAULT_BUTTON = '2'
        IMPORTING
          ANSWER         = ANSWER.
      IF ANSWER = '1'.
        LEAVE TO SCREEN 0.
      ELSE.
      ENDIF.
ENDCASE.
ENDMODULE.                 " EXIT_COMAND INPUT
*&      Module SCROLL INPUT
      text
MODULE SCROLL_SORT INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
WHEN 'P--'.
      TCL1-TOP_LINE = 1.
WHEN 'P-'.
      TCL1-TOP_LINE = TCL1-TOP_LINE - LINE_COUNT.
      IF TCL1-TOP_LINE LE 0.
         TCL1-TOP_LINE = 1.
      ENDIF.
WHEN 'P+'.
      I = TCL1-TOP_LINE + LINE_COUNT.
      J = TCL1-LINES - LINE_COUNT + 1.
      IF J LE 0.
         J = 1.
      ENDIF.
      IF I LE J.
         TCL1-TOP_LINE = I.
      ELSE.
         TCL1-TOP_LINE = J.
      ENDIF.
WHEN 'P++'.
      TCL1-TOP_LINE = TCL1-LINES - LINE_COUNT + 1.
      IF TCL1-TOP_LINE LE 0.
          TCL1-TOP_LINE = 1.
      ENDIF.
WHEN 'SORTUP'.
      READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY SELECTED = 'X'.
      IF SY-SUBRC = 0.
          SPLIT <FS_TCL1>-SCREEN-NAME AT '-' INTO HELP FLDNAME.
          SORT ITAB ASCENDING BY (FLDNAME).
      ENDIF.
WHEN 'SORTDN'.
      READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY SELECTED = 'X'.
      IF SY-SUBRC = 0.
          SPLIT <FS_TCL1>-SCREEN-NAME AT '-' INTO HELP FLDNAME.
          SORT ITAB DESCENDING BY (FLDNAME).
      ENDIF.
ENDCASE.
ENDMODULE.                 " USER_COMMAND INPUT
*&      Module UPDATE_MOD INPUT
      text
MODULE UPDATE_MOD INPUT.
CASE UPD_OK_CODE.
WHEN 'SAVE'.
      UPDATE ZSD_TABL_ORDBANK FROM ITAB .
      STS = SY-SUBRC .
      IF STS NE 0.
           MESSAGE E003(ZQOTBANK) .
      ENDIF.
ENDCASE.
ENDMODULE.                 " UPDATE_MOD INPUT
Thnx
Moni
Message was edited by: md monirujjaman

PROCESS BEFORE OUTPUT.
MODULE SET_STATUS.
LOOP AT      ITAB
      WITH    CONTROL TCL1
      CURSOR TCL1-CURRENT_LINE .
   MODULE SET_LINE_COUNT .
ENDLOOP.
PROCESS AFTER INPUT.
MODULE GET_OK_CODE .
MODULE EXIT_COMAND AT EXIT-COMMAND.
MODULE SCROLL_SORT.
LOOP AT ITAB.
      MODULE UPDATE_ITAB.
ENDLOOP.
      MODULE UPDATE_TABLE.
changed modules are ......
*&      Module UPDATE_MOD INPUT
      text
MODULE UPDATE_ITAB INPUT.
    MODIFY TABLE ITAB FROM ITAB.
ENDMODULE.                 " UPDATE_MOD INPUT
*&      Module TABL_UPD INPUT
      text
MODULE UPDATE_TABLE INPUT.
   CASE UPD_OK_CODE.
   WHEN 'SAVE'.
    UPDATE ZSD_TABL_ORDBANK FROM TABLE ITAB .
    IF SY-SUBRC NE 0.
         MESSAGE E003(ZQOTBANK) .
    ENDIF.
   ENDCASE.
ENDMODULE.                 " TABL_UPD INPUT
now i m able 2 get the latest edited values from user immediately i press enter button and getting saved by pressing SAVE button but further problems are, i have one dropdown button for status 1 field , and 1 date field are not getting updated .
So further help plz.

SMALL ISSUE WITH ALV HIERARCHY

Hi
Hi ,
I have small doubt in alv hierachail report ,
can anyone tell me how the header and the item level data match
i have iheader and iitem internal tables.
say i have matnr in iheader ,do i need to have the matnr field in iitem also
so if expand the iheader then i needed to get the material desc for that material.
DATA: s_keyinfo TYPE slis_keyinfo_alv.
s_LAYOUT-EXPAND_FIELDNAME = 'EXPAND'.
iKNOW THAT I HAVE TWO PASS SOMETHING TO S_KEYINFO TO RELATE .CAN ANYONE TELL ME HOW TO DO THIS.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
       EXPORTING
            i_callback_program = v_repid
            is_layout          = s_layout
            it_fieldcat        = t_fieldcatalog
            i_tabname_header   = 'IHEADER'
            i_tabname_item     = 'IITEM'
            is_keyinfo         = s_keyinfo
       TABLES
            t_outtab_header    = iHEADER
            t_outtab_item      = iItEM
       EXCEPTIONS
            program_error      = 1
            OTHERS             = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks

Hi Swathi,
Check out std programs:
BCALV_TEST_HIERSEQ_LIST
BCALV_TEST_HIERSEQ_LIST_EVENTS
BALVHD01
BALVHD01_GROUP
BALVHM10
BALVHM12
hope this helps.
Manish
Message was edited by:
        Manish Kumar

Having 2 small issues with 10.4.3 interface - shift click & control click

I am having two issues with 10.4.3 on my mom's computer.
1) I Control-Click the mouse and I do get a shortcut menu on the desktop, on icons, etc. How can I get this back? I can not seem to find a preference that sets this.
2) I am in iPhoto and would like to select multiple film rolls (consecutive rolls) by clicking the first and then clicking the last one that I would like and it is working like I am comand clicking and only selecting the two rolls that I have clicked on and not the ones in between.
Any help in how to work this out would be great.
Happy Turkey Day!
K

1) I Control-Click the mouse and I do get a shortcut menu on the desktop, on icons, etc. How can I get this back? I can not seem to find a preference that sets this.
Do you have any third-party items in:
/Library/Contextual Menu Items/
/Users/YourUsername//Library/Contextual Menu Items/
If you do, try dragging them onto your Desktop and then retry control-clicking.

Small issue with custom table cell editor and unwanted table row selection

I'm using a custom table cell editor to display a JTree. Thing i notice is that when i select a value in the tree pop-up, the pop-up closes (as it should) but then every table row, from the editing row to the row behind the pop-up when i selected the value becomes highlighted. I'm thinking this is a focus issue, but it thought i took care of that. To clairfy, look at this: Before . Notice how the "Straightening" tree item is roughly above the "Stock Thickness" table row? When i select Straightening, this is what happens to my table: After .
My TreeComboBox component:
public class TreeComboBox extends JPanel implements MouseListener {
    private JTextField itemField;
    private TreeModel treeModel;
    private ArrayList<ActionListener> actionListeners = new ArrayList<ActionListener>();
    private Object selectedItem;
     * Creates a new <code>TreeComboBox</code> instance.
     * @param treeModel the tree model to be used in the drop-down selector.
    public TreeComboBox(TreeModel treeModel) {
        this(treeModel, null);
     * Creates a new <code>TreeComboBox</code> instance.
     * @param treeModel the tree model to be used in the drop-down selector.
     * @param selectedItem tree will expand and highlight this item.
    public TreeComboBox(TreeModel treeModel, Object selectedItem) {
        this.treeModel = treeModel;
        this.selectedItem = selectedItem;
        initComponents();
     * Returns the current drop-down tree model.
     * @return the current <code>TreeModel</code> instance.
    public TreeModel getTreeModel() {
        return treeModel;
     * Sets the tree model.
     * @param treeModel a <code>TreeModel</code> instance.
    public void setTreeModel(TreeModel treeModel) {
        this.treeModel = treeModel;
     * Returns the selected item from the drop-down selector.
     * @return the selected tree object.
    public Object getSelectedItem() {
        return selectedItem;
     * Sets the selected item in the drop-down selector.
     * @param selectedItem tree will expand and highlight this item.
    public void setSelectedItem(Object selectedItem) {
        this.selectedItem = selectedItem;
        String text = selectedItem != null ? selectedItem.toString() : "";
        itemField.setText(text);
        setToolTipText(text);
     * Overridden to enable/disable all child components.
     * @param enabled flat to enable or disable this component.
    public void setEnabled(boolean enabled) {
        itemField.setEnabled(enabled);
        super.setEnabled(enabled);
    public void addActionListener(ActionListener listener) {
        actionListeners.add(listener);
    public void removeActionListener(ActionListener listener) {
        actionListeners.remove(listener);
    // MouseListener implementation
    public void mouseClicked(MouseEvent e) {
    public void mouseEntered(MouseEvent e) {
    public void mouseExited(MouseEvent e) {
    public void mousePressed(MouseEvent e) {
    public void mouseReleased(MouseEvent e) {
        showPopup();
    private void initComponents() {
        setLayout(new GridBagLayout());
        itemField = new JTextField();
        itemField.setEditable(false);
        itemField.setText(selectedItem != null ? selectedItem.toString() : "");
        itemField.addMouseListener(this);
        add(itemField, new GridBagConstraints(0, 0, 1, 1, 1.0, 0.0,
                GridBagConstraints.WEST, GridBagConstraints.HORIZONTAL, new Insets(0, 0, 0, 0), 0, 0));
    private void showPopup() {
        final TreePopup popup = new TreePopup();
        final TreeComboBox tcb = this;
        final int x = itemField.getX();
        final int y = itemField.getY() + itemField.getHeight();
        int width = itemField.getWidth() + popupButton.getWidth();
        Dimension prefSize = popup.getPreferredSize();
        prefSize.width = width;
        popup.setPreferredSize(prefSize);
        SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                popup.show(tcb, x, y);
                popup.requestFocusInWindow();
    private void fireActionPerformed() {
        ActionEvent e = new ActionEvent(this, ActionEvent.ACTION_PERFORMED, "TreeComboBoxSelection");
        for (ActionListener listener : actionListeners) {
            listener.actionPerformed(e);
    private class TreePopup extends JPopupMenu {
        private JTree tree;
        private JScrollPane scrollPane;
        public TreePopup() {
            initComponents();
            initData();
        private void initData() {
            if (treeModel != null) {
                tree.setModel(treeModel);
        private void initComponents() {
            setFocusable(true);
            setFocusCycleRoot(true);
            tree = new JTree();
            tree.setRootVisible(false);
            tree.setShowsRootHandles(true);
            tree.setFocusable(true);
            tree.setFocusCycleRoot(true);
            tree.addTreeSelectionListener(new TreeSelectionListener() {
                public void valueChanged(TreeSelectionEvent e) {
                    tree_valueChanged(e);
            scrollPane = new JScrollPane(tree);
            add(scrollPane);
        private void tree_valueChanged(TreeSelectionEvent e) {
            DefaultMutableTreeNode node = (DefaultMutableTreeNode) tree.getLastSelectedPathComponent();
            setSelectedItem(node.getUserObject());
            fireActionPerformed();
            this.setVisible(false);
}My TreeComboBoxTableCellEditor:
public class TreeComboBoxTableCellEditor extends AbstractCellEditor implements TableCellEditor, ActionListener {
    protected TreeComboBox treeComboBox;
    protected ArrayList<CellEditorListener> cellEditorListeners = new ArrayList<CellEditorListener>();
    public TreeComboBoxTableCellEditor(TreeComboBox treeComboBox) {
        this.treeComboBox = treeComboBox;
        treeComboBox.addActionListener(this);
    public Object getCellEditorValue() {
        return treeComboBox.getSelectedItem();
    public Component getTableCellEditorComponent(JTable table, Object value, boolean isSelected, int row, int column) {
        treeComboBox.setSelectedItem(value);
        return treeComboBox;
    public void actionPerformed(ActionEvent e) {
        stopCellEditing();
}Any thoughts?
Edited by: MiseryMachine on Apr 3, 2008 1:21 PM
Edited by: MiseryMachine on Apr 3, 2008 1:27 PM

As I said, you have to have empty context elements before additional rows will be open for input.
For instance if you want to start with 5 rows available for input do the following to your internal table that you will bind:
data itab type standard table of sflight.
do 5 times.
append initial line to itab.
enddo.
context_node->bind_table( itab ).
The other option if you need n number of rows is to add a button to the table toolbar for adding more rows. When this button is pressed, you add a new context element to the node - thereby creating a new empty row in the table.

A small issue

Similar Messages

Maybe you are looking for