A small plea

With everyone complaining about the 3g's battery being low and I'm not sure if it's already been said, but could SOMEONE please release a free app that allows you to control the on/off functions of wi-fi, bluetooth, 3g, and data roaming, so that the user doesn't have to route around in settings to turn things off to save battery.
I'm not a developer so I wouldn't know where to start if I wanted to

I made a post about this a while back, and I sent Apple some feedback directly which is really the best place for such things. I suggest you do the same since you have the same interest. Here's what I'd love:
Location based profiles that automatically update your iPhone settings. For example, at my office I have WiFi, decent Edge coverage, no 3G, and I don't use my bluetooth headset. When I arrive at my office, I'd love my iPhone to automatically detect my location, turn off bluetooth and 3G, and turn on WiFi (which I'd like off in the car).
You could set up such profiles for all your common locations (work, home, grocery story, etc.).

Similar Messages

Document for invoice Consolidation

Hello Experts,
Need a small, Pleasse give me if you any documentation on INVOICE CONSOLIDATION.
Need urgent..
Thanks,
Suresh

Hi Suresh,
Billing split will be controlled thro 'Data Transfer Routines'. If you
want to have different split criteria then follow steps as follows:
1.Write your own data transfer routine which contains your own defined split criteria using the T-Code:VOFM.-Date Transfer->Billing.
2.Go to Copy control Transaction VTFL select the respective item category and assign the routine in Data transfer field.
VBRK-ZUKRI is the field where split criteria is defined.
You can review the SAP note 11162.
For invoice combination of different divisions, you can review SAP Note 50752.
Hope this will help.
Thanks & Regards,

Photoshop CS4 11.0.1 crash upon save, leaves small sized corrupt PSD file

Hi!
I've just updated our retouchers Photoshop CS4 to 11.0.1 but one of the issues we had with 11.0.0 remains. The problem doesn't happen that often, but since the result is an unusable .PSD file it's pretty nasty...
Sometimes when saving Photoshop crashes and the .PSD that was to be saved becomes a small (68 KB in the last example) and unusable.
The hardware/software we have:
Mac Pro 2.66 GHz (some with 5 GB RAM and some with 9 GB RAM)
Mac OS X 10.5.6
Photoshop CS4 Standard (updated to 11.0.1)
People work on server volumes shared via AFP. I've heard saving over the network isn't supported, but there's no other way, plus this issue never happened in CS3 so...
Any ideas on what can be done?
Below is the latest crash log:
Process: Adobe Photoshop CS4 [41265]
Path: /Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app/Contents/MacOS/Adobe Photoshop CS4
Identifier: com.adobe.Photoshop
Version: 11.0.1 (11.0.1x20090216 [20090216.r.522 2009/02/16:17:00:00 cutoff; r branch]) (11.0.1)
Code Type: X86 (Native)
Parent Process: launchd [84]
Date/Time: 2009-03-24 11:04:07.914 +0100
OS Version: Mac OS X 10.5.6 (9G55)
Report Version: 6
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000008
Crashed Thread: 0
Thread 0 Crashed:
0 com.adobe.Photoshop 0x00748248 0x1000 + 7631432
1 com.adobe.Photoshop 0x004d962d 0x1000 + 5080621
2 com.adobe.Photoshop 0x004dda2f 0x1000 + 5098031
3 com.adobe.Photoshop 0x004dedba 0x1000 + 5103034
4 com.adobe.Photoshop 0x004a6a58 0x1000 + 4872792
5 com.adobe.Photoshop 0x000821ad 0x1000 + 528813
6 com.adobe.Photoshop 0x00082bdb 0x1000 + 531419
7 com.adobe.Photoshop 0x00acb564 0x1000 + 11314532
8 com.adobe.Photoshop 0x004a5f6e 0x1000 + 4869998
9 com.adobe.Photoshop 0x00077f9e 0x1000 + 487326
10 com.adobe.Photoshop 0x0006b9ed 0x1000 + 436717
11 com.adobe.Photoshop 0x00069906 0x1000 + 428294
12 com.adobe.Photoshop 0x00063d65 0x1000 + 404837
13 com.adobe.Photoshop 0x00063ed3 0x1000 + 405203
14 com.adobe.Photoshop 0x0006222f 0x1000 + 397871
15 com.adobe.Photoshop 0x002206aa 0x1000 + 2225834
16 com.adobe.Photoshop 0x00220736 0x1000 + 2225974
17 com.adobe.Photoshop 0x00003912 0x1000 + 10514
18 com.adobe.Photoshop 0x00003839 0x1000 + 10297
Thread 1:
0 libSystem.B.dylib 0x92893906 kevent + 10
1 libSystem.B.dylib 0x92894095 _pthread_start + 321
2 libSystem.B.dylib 0x92893f52 thread_start + 34
Thread 2:
0 libSystem.B.dylib 0x9286320e semaphore_wait_signal_trap + 10
1 libSystem.B.dylib 0x92895206 _pthread_cond_wait + 1267
2 libSystem.B.dylib 0x928da539 pthread_cond_wait + 48
3 com.adobe.amt.services 0x04da4552 AMTConditionLock::LockWhenCondition(int) + 46
4 com.adobe.amt.services 0x04d9f995 _AMTThreadedPCDService::PCDThreadWorker(_AMTThreadedPCDService*) + 115
5 com.adobe.amt.services 0x04da45b0 AMTThread::Worker(void*) + 20
6 libSystem.B.dylib 0x92894095 _pthread_start + 321
7 libSystem.B.dylib 0x92893f52 thread_start + 34
Thread 3:
0 libSystem.B.dylib 0x9286a3ae __semwait_signal + 10
1 libSystem.B.dylib 0x92894d0d pthread_cond_wait$UNIX2003 + 73
2 libGLProgrammability.dylib 0x95affb32 glvmDoWork + 162
3 libSystem.B.dylib 0x92894095 _pthread_start + 321
4 libSystem.B.dylib 0x92893f52 thread_start + 34
Thread 4:
0 libSystem.B.dylib 0x9286321a semaphore_timedwait_trap + 10
1 ...ple.CoreServices.CarbonCore 0x9237449b MPWaitOnSemaphore + 125
2 MultiProcessor Support 0x1

This is the boilerplate text I use in connection to saving to a network (please NOTE the part where it explains that
normally, it does work
, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please
cease and desist immediately
in the event you are currently experiencing problems with one or more files.
Working across a network is not supported.
See:
http://www.adobe.com/support/techdocs/322391.html
Copy the
CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does
not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

How to publish a small size flash site

I have made a total flash site but the exported site is 50 mb!!
Not a usable size, so I want to know how to make this site 'smaller'.
there are a ton of flash sites on the www, so I must do something wrong..
What is the normal file-size for a flash site?
pleas help.
grtz
Daan

Typically a flash file only gets that large when you embed a lot of images or video.
If you want to shrink the size of the SWF, you will want to externalize those assets somehow. If video, use progressive download and an FLVPlayback component. If images, save them to a directory and load them at runtime with a Loader component. Audio can be loaded at runtime very easily as well.
If there is detailed animation over the video that isn't interactive, export the entire animation as a video, and then load that in another file to decrease initial load time.
Typically, these days, a good size SWF comes in around 1-2 MB. Ideally it would be much smaller than that, wherein the initial load should really be about 30-60 kb, so it will open in 1-3 seconds on a 56k connection, and then all other assets load after the initial load.

EVERYTHING is too small in Thunderbird. How do I increase the font size of everything!

It's ridiculous that Thunderbird requires an "add on" download to enable making the font size larger on EVERYTHING in the Thunderbird email program. What is Thunderbird thinking making everything so small you can barely see it?!
There has got to be a better way!!!
Please increase the size of the fonts on your program. (I know I can change the fonts and type style on outgoing emails. That's not the problem I want EVERYTHING LARGER! I want to see what I type in a message the same as my recipient will read it!

Zenos, thank you for your reply. Unfortunately I have read those same comments before. In my mind, there shouldn't be an "add on" necessary to change the font size type of the entire interface of Thunderbird if desired. And to have to write "css code?" --- that's ridiculous!
No, I don't care what font and style my RECIPIENTS view my emails --- that's their prerogative. What I want to change is how I see everything on Thunderbird, from the interface to what I'm typing in an email. The font in Thunderbird for everything is so small it's ridiculous, and to not be able to change it is awful. What was/is Mozilla thinking?!
I may just totally bail on Thunderbird for this reason (I was an old Eudora user). With all the complaints I notice, I would think Mozilla would fix this problem in Thunderbird and add the capability to change how the interface is viewed in the Thunderbird program without needing "add ons." I am wary of downloading add-ons since several users have complained about conflicts in other areas of their computer usage.
So here's my plea to Mozilla --- Please fix this problem and make your Thunderbird email interface with larger default fonts!!!

Apple says small number of Apple TVs have WiFi issues, opens replacement program

I have an AppleTV 3rd generation with issues of connectivity when I use the Radio. Every 10 or 15 minutes disconnects from showing an error on the screen, I research on the internet and apparently there is a program to replace some devices due a known malfuncion with the WiFi.
I always blamed to my cheap router and the poor internet connection I had in my former country Argentina. Now i moved to Chile and i have a nice Cisco/Linksys router and the issue persists.
Please check the links below about the replacement program:
http://www.macworld.com/article/2034731/report-apple-replacing-some-third-gen-ap ple-tv-units-with-wi-fi-issues.html
http://9to5mac.com/2013/04/15/apple-says-small-number-of-apple-tvs-have-wifi-iss ues-opens-replacement-program/
I would like to know if this program exists and also if my device is under this program.
The serial number of my AppleTV is C0*****RHN.
<Edited by host>

That program was from over a year ago, it is no longer running. It still required proper troubleshooting to occur. It wouldn't have to do with an internet connection as this an issue with the local/wifi network, a cheap router will impact performance but there are other factors.
Using ethernet will help to see if there's a wifi issue. Get a network report from istumbler, netstumbler or similar, look for signal strength and noise.
If your network looks ok then I would take to Apple for testing, if it is found to be defective then they are usually good about replacement.

How to zoom into small text in Title Edit Window?

Ok,
So when I am putting in disclaimer text in the Title edit window, I can't read it. I could if I could zoom into it or at least increase the scaling of the video preview.
Someone else has had to have had this problem. As you can see from the attached image, all the wasted extra space around the video, if I could just zoom in like you can on the preview window I could read it.
How can I zoom into the area I am trying to edit with small text???
Pleas help, anyone???

First of all Reset Current workspace, does not seen to fit the window also I would make the titler a floating window.
You cannot zoom in but you can make it full screen by hitting the 'tilde"(grave) key.
You can also scale up the text, adjust, and scale it down again.

Maya PLE and 10.4.6

I had a problem last week with my Mac waking from sleep mode, and when I updated to 10.4.6, it seemed to fix it. Well now I find that it was not truly fixed and that Maya 7 PLE jams up on startup. It cannot find the renderer UI or some such scripting line, and refuses to startup further.
I tried a complete uninstall and removal of all helper files that I could find, but when I reinstalled it, I had the same problem. I do not believe that this is a Maya issue, as it worked before under 10.4.5. Another possibility is that when I was attempting to repair my sleep problems last week, resetting the NVRAM somehow messed things up. I am unsure. Anyone have any ideas? Thanks.

I am very familiar with this issue.
(There are a few choices at hand, but going back to 10.4.5 will only prolong your issue to have to deal with it another time).
Update your AFP protocol.
*Roll back the AFP to 10.4.5
*Use the PhotoShop "DisableGetInfoPlugin".
(*I have last 2 if you need them)
Here's the real truth:
While these solutions may help for most files, it won't be a fix for every file you have. The reason is file specific.
You should be able to save the file to the desktop and copy it to the network. From there the file should be okay as long as when it was saved, it was saved on the 10.4.6 OS, using the newer AFP spec.
Even when PhotoShop crashes, the data in the file is in most cases saved. The issue is due to the character field length in the commenting field for the file. The newer AFP spec uses a smaller field than the older one did, causing the application to puke when too many characters are encountered in a file.
You see why not every file will be affected this way, only the ones with too many comments saved in the commenting field (using the older AFP spec).

The size off my account is not as oit should be , small size , what is the reasson

should be big , not small , i must look to short on screen to see what happens , it is verry terrible , pleasse fix it ore gife sullution .

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
I ran Coldfusion 8 on SBS 2003 Premium for 6 months with no problems. When we finally decided to cut over to SBS 2008, that’s when everything went to hell. I tried for weeks to get Coldfusion 8 to install properly on the new SBS 2008 64-bit box. During the course which, I found bits and pieces of information for Vista 64-bit and Windows Server 2008 64-bit installations. There are some distinct differences, however, with SBS 2008 since it runs core Web applications like OWA, RWW and Companyweb. After countless unsuccessful attempts, one of which completed corrupted the box, I found the solution.
I have attempted in this white paper to detail the steps to assist others who may be in a similar situation. I don’t make any warranty for the information, but so long as you follow the steps carefully you should be fine. BTW, for those of you who say Adobe offers free technical support for licensed users, that’s not entirely true. Like I said, I purchased CF8 and originally installed it on an SBS 2003 Premium box. After we cut over to SBS 2008 and encountered problems, Adobe wouldn’t provide any technical support without charging. Moreover, based on my initial conversations with Adobe’s technical team, no one seemed to know much about running 64-bit on SBS.
From my understanding, only two versions of Coldfusion 8 can be installed in 64-bit: Enterprise and Developer. The “normal” install (which I paid a grand for) can only be deployed in 32-bit mode – gee, THANKS Adobe! By the way, in Developer mode only two distinct IPs can access the site in addition to the localhost. Any additional IPs will result in a CFML error message stating that the maximum number of IPs have been exceeded. At any rate, take your time and follow the steps to achieve a successful installation.
PRE-INSTALLATION TASKS
Back Up SBS
It’s always a good practice to backup your server before deploying any kind of major system changes. Although this step is optional, I recommend it in case you need to restore your server for any reason. Bear in mind, if your system ever gets totally corrupted, you cannot restore back from the twice daily incremental backup images alone. You will need a full backup with system recovery information to restore. Here are the basic steps:
Click: Start > Programs > Administrative Tools. Right-click “Windows Server Backup” and choose “Run as administrator”.
Click “Backup Once” under Actions in the right-hand pane.
Choose the “Different Options” radio button under Backup Options.
Choose the “Custom” radio button. What we’re primarily interested in here is backing up the OS – not your data partitions or attached drives.
Select the “SYSTEM (C)” checkbox, uncheck any others. Also, ensure that the “Enable system recovery” checkbox is selected before continuing on.
Under ‘Specify Destination Type’, I usually select the “Local drives” radio button and point it to a Terrabyte USB drive I use for backups. You can point this to a tape drive, or select the “Remote shared folder” radio button if you map to a UNC path to store your backup images. Just remember, make sure that whatever path you select can readily be accessed in the event of an emergency. Also, make sure the “Verify after writing (recommended)” checkbox is selected.
Under ‘Specified Advanced Option’, I usually select the “VSS full backup” radio button instead of the default since I don’t use a 3rd party backup product. If like me you rely solely on SBS for your backups, choose the full backup option.
Confirm everything and click “Backup”. This process may take several hours depending on the size of your system.
Verify ISAPI Filters:
In IIS Manager, double-click the server instance in the left-hand pane.
In the center pane under IIS, double click the “Modules” icon to verify that the ISAPI native modules are already installed for IIS. If it’s set up correctly you should see two entries:
IsapiFilterModule %windir%\System32\inetsrv\filter.dll
IsapiModule %windir%\System32\inetsrv\isapi.dll
If either of these modules are missing, you will need to re-install these (google for a solution).
Set Up Development Environment
Create a directory for your CFML files outside of the default Windows location (e.g., default is usually C:\inetpub\wwwroot\). For the purpose of our install, I created a directory on a separate disk called: D:\DEV.
Copy and paste your CFML files and directories into the new DEV root Web directory. This will eventually be the directory where the Coldfusion installer places the CFIDE and CFDOCS folders.
Open IIS Manager and double-click the server instance in the left hand pane. Expand the “Sites” folder. Right-click the Sites folder and select “Add Web Site”.
Enter a name in the “Site Name” box (e.g., “test-site”). You will notice that the system will automatically create a corresponding Application Pool with the same name. NOTE: this is important to prevent conflicts between the DefaultAppPool (needed for SBS Web apps like OWA, RWW, etc.) and the application pool needed for Coldfusion to function properly in SBS 2008.
Point the “Physical Path” to the directory you created in step #1 above (e.g., “D:\DEV”).
Don’t worry about testing the connection. If you click “Test Settings” you may receive a warning that IIS cannot verify access to path (D:\DEV). Don’t worry about this for the time being.
Under “Host name”, enter a DNS path to your site (e.g., “dev.test-site.com”). Click “OK”.
Configure Application Pools for Installation
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “False” to “True”, and then click “OK”. NOTE: if you skip this step, Coldfusion will not properly create the required mappings during the install. We will change this setting back after the installation completes – more on this later.
Modify the application.host.config File for 64-Bitness
Click: Start > Programs > Accessories. Right-click “Notepad” and choose “Run as administrator”.
Open the config file from within Notepad – default location: C:\Windows\System32\inetsrv\config\applicationHost.config
Do a search and change this one line from:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" />
To this:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" preCondition="bitness64" />
Restart the IIS Admin service.
Set HTTP Compression
According to some threads I read, the http compression module can cause errors if you don’t disable it globally. To remedy this, perform the following:
Click: Start > Programs > Accessories. Right-click “Command Prompt” and choose “Run as administrator”.
At the command prompt, change directory to intetsrv by typing: cd inetsrv
Run the following command:
C:\Windows\system32\inetsrv>appcmd.exe set config -section:system.webServer/httpCompression /-[name='xpress']
This will turn off HTTP compression for all sites in IIS.
In IIS Manager, double-click the server instance in the left-hand pane. Double-click the “Compression” icon in the IIS section of the center pane.
Uncheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Recheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Restart the IIS Admin service. This should enable compression and coldfusion to work at the same time.
NOTE: if for some reason you need to reverse this, run the following command from the command prompt:
C:\Windows\system32\inetsrv\appcmd.exe set config -section:system.webServer/httpCompression /+[name='xpress',doStaticCompression='false',dll='%windir%\system32\inetsrv\suscomp.dll']
INSTALLATION TASKS
Download the 64-bit installation package from Adobe – filename: coldfusion-801-wind64.exe.
Right-click the file and select “Run as administrator”.
Accept the terms of the License Agreement.
If you have an Enterprise license, enter it. For our purposes, just click the “Developer Edition” checkbox.
Select “Server configuration” – the default radio button.
I deselected all subcomponents and can’t guarantee that you’ll arrive at the same results if you select additional items like “.NET Integrated Services”. It should be fine, particularly if you install documentation. My preference was to keep the install as plain vanilla as possible.
Select the directory path for Coldfusion to install into – default is :C\Coldfusion
THE NEXT TWO STEPS ARE CRITICAL TO YOUR SUCCESS. Unselect “All IIS Websites” and select the “Configure specific IIS Website or another web server” radio button. Click “Add”, and then select your test Web site (e.g., “test-site”) under “IIS Web Site”. Hit “OK”.
Do NOT use the default directory path for the CF Administrator location (e.g., default path: “C:\inetpub\wwwroot”). Instead, point the installer to your new DEV root Web directory (e.g., “D:\DEV”). The bottom line, you want the installer to place the CFIDE directory and files within this folder, alongside your other CFML files and folders.
Enter an Administrator password.
Choose to Enable RDS, or not. I enable this by preference but it is not required. This allows you to make updates to files using a CFML editor directly vs. having to move/FTP the files over if you’re working remotely. Opponents to this argue that it’s potentially less secure, but for a lower environment I don’t see this as a major concern.
Confirm everything to kick off the install.
If all goes well you should see a message at the end stating that the install was successful. I recommend you uncheck the box that asks you to open the CF Administrator in the default Web browser after the install. NOTE: we will open it a different way during the post-installation tasks. The worst thing that will happen if you forget to uncheck the box is that you might receive an error that the command prompt hung – not a big deal – just close it and move on to the next (final) steps.
POST-INSTALLATION TASKS
Verify CF Installation:
The installation will create a new folder in your program group: Start > Programs > Adobe > Coldfusion 8. The default “Administrator” link will not work because it points to the wrong path: http://127.0.0.1/CFIDE/administrator/index.cfm. The “127.0.0.1” or “localhost” path as you may recall in IIS, points by default to the “C:\inetpub\wwwroot” directory. Our CFIDE files, however, are located within: D:\DEV.
To bring up the CF Administrator logon page, open up a Web browser and replace the “http://127.0.0.1” part of the path with the DNS path name to your CF environment (e.g., http://dev.test-site.com/CFIDE/administrator/index.cfm).
This should bring up the Coldfusion Administrator Login screen. Enter in the Administrator password you created during the install to log in and configure your application server.
Verify that your test-site renders correctly by typing in your test URL into a Web browser (e.g., http://dev.test-site.com).
Fix Application Pool Defaults to Re-enable SBS Web Applications:
At this point, Coldfusion Administrator and your test CMFL Web site should be working properly. The problem is, default SBS Web applications like OWA, RWW and Companyweb will throw errors and fail to start. Fortunately, this is easily remedied by performing the following steps:
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “True” to “False” this time. This should re-enable the SBS applications, which would otherwise result in 500 errors (e.g., OWA, RWW, Companyweb, etc.). There is no need to restart IIS.
Open a Web browser and test that you can once again connect to OWA, RWW and Companyweb successfully.
In IIS click to highlight the application pool for your new site (e.g., “test-site”). In the right-hand pane, click “Advanced Settings”. Ensure that “Enable 32-Bit Applications” – second item from the top – is set to “True” for this application pool specifically.
Lastly, jump up and down for joy! Hopefully now, everything is working. Best of luck!! ..Paul D (MCP).

First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
Second, this is probably your problem right here:
http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
Dave Watts, CTO, Fig Leaf Software

Animated Gif with large base image & small animated part.

Hello guys
I'm not really sure how to explain that, due to my limited English comprehansion. I will try with images.
I can easily create animated gif out of multiple layers, given each layer is identical, with small changes accuring over time.
But I yet to figure out an animated gif, that uses one large image for the base, and only small part of it is animated.
I always get the animated part working, without the large base applying across all the frames. All it does, is flashes once
the frame is reached and then moves on to being transparent, showing only the small animated part.
For example, this is a GIF made with Galaxy S4, of my friend playing with his phone, imported into PS CS6. On the Galaxy,
after I record the GIF, I can use my finder to touch, mask and freez parts I don't want to move, and leave only small, animated bit.
When I import it to PS, it shows one layer with full image, and bunch of frames with the animation part only.
http://i.imgur.com/UAiopQA.jpg
http://i.imgur.com/7XOGGV6.jpg
Problem is, once the image is open with PS, I'm not able to export it to keep it working in the same manner. Given the Samsung's
gifs are 8 to 10mb, it's hard to edit it, to make it more size friendly.
The gif clearly works the way I describe, so there is a setting or method I don't know about.
If PS is not best tool for editing GIF, what other apps would you recommand I use for it?
Thank you for the taking the time to read
best regards
Monica

This has been an ongoing issue for me since I switched from Powerpoint to Keynote. Most of the animated gifs with transparent backgrounds that I used with Powerpoint are no longer transparent in Keynote. You may want to search for those earlier threads on this topic...
To summarize: I've had to open up my animated gifs in After Effects and use the Color Key effect to restore transparency, with mixed success.
Good luck!

Is there a way of working collaboratively on a flex project with a small project group?

Is there a way of working collaboratively on a flex project with a small project group?
I am part of a small group of developers who wish to work on a single flex project together. Is there a way to set up flex so that the project can be developed by multiple people at the same time. I have seen one thread out on the internet about working locally and then uploading to SVn but this is not an option in this case.
Any ideas.
Many thanks in advance
Dave

I would say that rushing into development without a source-control system will cost you more in the long-run. If your organisation is serious about developing software it then it needs to invest in the necesary infrastructure, so you should get that process kicked-off as soon as possible.
In the interim you could set-up a source control server on one developer's machine or commandeer a spare machine to use as a temporary source control server. Just make sure you have it backed-up regularly. Or you could use one of the online source control services; many will support private repositories for a small fee.

L need help with textedit, I inserted a picture then the cursor went from small to the size of picture and l need to write a header next to the picture not at the bottom of it. can anyone help please?

Can anyone tell me how to make cursor smaller after inserting picture so that l can add somethimg right next to it instead of bottom of picture. Meaning the next line is too low

AFAIK, you can't. The nature of TextEdit is that it allows the picture to be treated as a character and adjusts the cursor size for that line.
You need a app that supports transparent overlays.

Desperate plea: ipod not recognized by Windows/itunes

I apologise ...
for being yet another forum user who pops up with a desperate plea.
I am fairly geeky and done everything I can think of.
I have 2 ipods. One is a brand new video ipod, the other a 2nd generation. Both ipods work on one one laptop, my video ipod refuses to work on my Sony Vaio (whereas the 2g ipod is fine)
Specifically: I connect via USB and a "not recognised ... device malfunctioning" error occurs. Using exactly the same USB port, cable and a different (the 2g) iPod it works fine.
I have removed and reinstalled itunes and ipod updater.
I went to the mac store's "genius" bar and the ipod was given the all clear.
So, there's clearly a conflict between my video ipod and my Sony Vaio (running XP: have tried this with and without SP2) My question is what should I try next?
I've done everything I can think of, and as the other ipod works (and this video ipod works with other systems!) I am at a loss at to which variable to try next.
I apologise for bothering you regulars, but rest assured significant googling and more have turned nothing up ...
I wait in hope!
To make a little clearer as my post was not particularly eloquent: my 2g ipod works fine using the same USB cable and USB port. The 5g is not recognised. I am trying to establish the variable between these so I can fix it. Any ideas?

Thanks for the speedy response.
I am afraid, no, there are no errors when nothing is plugged in or, indeed, when the 2g iPod is plugged in. I've followed other threads on here and been sure to have usbstor.inf etc all in place.
When I plug in the 5g, windows says a device attached to the system is malfunctioned or unknown. In device manager it says the device is unknown.
The ipodservice is running and all other software and processes are there/have been reinstalled/restarted etc. I've done every I can logically think of!
I am really at a loss as to why my 2g iPod works and my 5g iPod won't. Annoyed as well, obviously, as the Mac store formatted my iPod today during the troubleshooting. Thus this morning I had 25GB of music and no ability to update, now I have 0GB of music and no ability to update (I still have all the music on my laptop, I mean simply I can't get it on to the iPod at the moment)
Can anyone think why one iPod works and one doesn't? Is there anything in the USB 1.1 or 2.0 side of things that could be playing up?
So grateful for any help!
Tom

My email shrunk so small that I can no longer read anything.

I am using a new laptop and am unfamiliar with what key combinations do what. I have seen my email page get larger and smaller and have no idea how I'm doing it. I thought it had to do with the mouse area, but cannot recreate it. My email screen is now so small, that I cannot read it and cannot figure out what I did. I called Toshiba, and they have assistance for Internet Explorer only. :^( HELP!!!
I also do something that causes a new internet page to open, and something that causes it to show all open pages in thumbnails. There are times when I type an email and I do something and it causes the message to be sent. WHAT AM I DOING???? I feel like an idiot!

:^( This is the person with the question - I had to log in to Internet Explorer in order to read the email and click the link to get it to post. UGH NO PHONE NUMBERS FOR CUSTOMER SUPPORT. YIKES!!! I MAY NEED A NEW BROWSER.

A small plea

Similar Messages

Maybe you are looking for