A small portion of the screen on the left is cut off.

The firefox window is shifted a little to the left. For instance, if menu bar is enabled, half of the letter 'F' in File menu is missing. A little amount of the big circle for back navigation is missing on the left. The left end of the first tab is also missing. Resizing or restoring the window does not help. It happens only in normal mode and not in safe mode. Disabling add ons individually in normal mode does not help either.

vshare plugin was the problem for me too. My screen looked just like your screen shot.

Similar Messages

  • I have a macbook pro 17".  How can I change the way things look?  The page only takes about half of the screen and the fonts are fairly small.  I am sure there is an easy adjustment.  Please clue me in.  Thanks

    I have a macbook pro 17".  I love the big screen, but how can I change the display?  The content takes about half of the screen and the fonts are very small.  I am sure it is an easy fix, so please clue me in.  Thanks

    Look at your >System Preferences>Displays

  • Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB

    Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
    Interestingly they both appear in the System Profiler, but just not working the same as before
    I have tried other USB ports, but the same responce,

    yes I did reset the PRAM, but no benefit, still the same problem
    my usb devices are:  keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
    the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
    here is a cut and paste of the current  "System Profiler>Hardware>USB"   (usb device tree)
    USB Bus:
      Host Controller Location:          Built In USB
      Host Controller Driver:          AppleUSBOHCI
      PCI Device ID:          0x0026
      PCI Revision ID:          0x0000
      PCI Vendor ID:          0x106b
      Bus Number:          0x18
    Hub in Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x1002
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    HL-1270N series:
      Version:          1.00
      Bus Power (mA):          100
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Brother
      Product ID:          0x0008
      Serial Number:          L9J286292
      Vendor ID:          0x04f9
    Basic Optical Mouse:
      Version:          0.00
      Bus Power (mA):          100
      Speed:          Up to 1.5 Mb/sec
      Manufacturer:          Microsoft
      Product ID:          0x0084
      Vendor ID:          0x045e
    Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          250
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x0204
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    SuperDisk USB 120MB drive:
      Version:          0.0e
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Imation
      Product ID:          0x0002
      Vendor ID:          0x0718
    Hub in Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x1002
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    HL-1270N series:
      Version:          1.00
      Bus Power (mA):          100
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Brother
      Product ID:          0x0008
      Serial Number:          L9J286292
      Vendor ID:          0x04f9
    Basic Optical Mouse:
      Version:          0.00
      Bus Power (mA):          100
      Speed:          Up to 1.5 Mb/sec
      Manufacturer:          Microsoft
      Product ID:          0x0084
      Vendor ID:          0x045e
    Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          250
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x0204
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    HL-1270N series:
      Version:          1.00
      Bus Power (mA):          100
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Brother
      Product ID:          0x0008
      Serial Number:          L9J286292
      Vendor ID:          0x04f9
    Basic Optical Mouse:
      Version:          0.00
      Bus Power (mA):          100
      Speed:          Up to 1.5 Mb/sec
      Manufacturer:          Microsoft
      Product ID:          0x0084
      Vendor ID:          0x045e
    Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          250
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x0204
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    SuperDisk USB 120MB drive:
      Version:          0.0e
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Imation
      Product ID:          0x0002
      Vendor ID:          0x0718
    USB Bus:
      Host Controller Location:          Built In USB
      Host Controller Driver:          AppleUSBOHCI
      PCI Device ID:          0x0026
      PCI Revision ID:          0x0000
      PCI Vendor ID:          0x106b
      Bus Number:          0x19
    LaCie d2 DVDRW USB:
      Capacity:          451.76 MB
      Removable Media:          Yes
      Detachable Drive:          Yes
      BSD Name:          disk2
      Version:          0.00
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          LaCie
      OS9 Drivers:          No
      Product ID:          0x1011
      Serial Number:          FFFFFFFFFFFF
      S.M.A.R.T. status:          Not Supported
      Vendor ID:          0x059f
    LaCie d2 DVDRW USB:
      Capacity:          451.76 MB
      Removable Media:          Yes
      Detachable Drive:          Yes
      BSD Name:          disk2
      Version:          0.00
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          LaCie
      OS9 Drivers:          No
      Product ID:          0x1011
      Serial Number:          FFFFFFFFFFFF
      S.M.A.R.T. status:          Not Supported
      Vendor ID:          0x059f

  • HT201412 My Ipad is not responding.  It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

    My Ipad is not responding.  It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • My iphone 4 has a SIM card and lately is saying that it is not installed when it is, and it has a small light in the screen where the card goes into the slot, why is this happening?

    my iphone 4 has a SIM card and lately is saying that it is not installed when it is, and it has a small light in the screen where the card goes into the slot, why is this happening?

    Hi cosmoph1,
    If you are having issues with your iPhone not recognizing the installed SIM, you may find the following article helpful:
    iPhone: Troubleshooting No SIM
    http://support.apple.com/kb/ts4148
    Regards,
    - Brenden

  • I have an iPhone 5 and just recently when I get the camera button and it opens there is a black border around the screen and the screen is small and I don't know what I did to cause it or what to do to make it go away anyone help

    I have an iPhone 5 and just recently when I opened the camera there is a big black border around the screen causing the picture itself frame to be smaller I don't know what I did to cause this or what I can do to make it go away can anyone help/

    First off, try a reset of the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, see if the problem persists.

  • My ipod nano has horizaontal lines through the bottom portion of the screen and the left half of the screen is black, the right half of the screen changes from red, to blue to orange, etc.  Any idea how to fix that?

    White stripes suddenlt appeared at the bottom of the screen on my ipod nano a few weeks ago.  I figured it was just from use and that it is an older model- I could still see through them and use the device.  Yesterday, only the left half of the screen was visible, the other side was black.  This morning, the stripes are still there, all the way across the screen on the bottom, the left side os black and the right sise is red most of the time.  Any ideas on what happened and how to fix it?

    Hello scgreco,
    I would be concerned as well if my iPod nano screen had stripes and was partially black.  I found a resource that I think would help in a situation like this.
    I recommend following the steps in this troubleshooting assistant for your iPod nano model:
    iPod Troubleshooting Assistants
    http://www.apple.com/support/ipod/five_rs/
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • Presentation starts 5" from the left side of screen and pushes intellegence off the screen to the right.

    The top of my screen is normal: the tool bar starts "File, Edit...
    The body of the screen while running Firefox-and during typing of this message- is full of lite. The actual data: starting from the top of this page- "Firefox Help... Ask a new..." etc. starts 5 1/4 inches from the left of the page.
    It's as if Firefox were presenting a wider page with the presentation moved to the right. This pushes the last, normal, 5" of the presentation off the screen.
    The rite end of the bar which starts out: http://www.mozilla.com/en-US/firefox/fx/
    is off the page, so the facilities at the rite end are lost.
    Any presentation, including Amazon.com and Youtube.com are similarly pushed off the rite side of the screen by 5".
    I have no access to the rite-most 5" of any internet presentation.
    The sliders that move the presentation up and down and left/ rite are off the screen.
    I have shrunk the display down so small, i can barely see the numbers: Control panel\ display \ settings \ 1920 by 1200. This gives the ILLUSION of centering the presentation, but still no sliders. At this setting, i can see the full width of Amazon. Youtube appears centered, with 4 1/4" on both left and rite, but no edge sliders.
    I dropped the 'setting' to 1440 x 900.
    Lost about 3" off the rite side of Amazon; barely on the rite edge of Youtube.
    None of my local programming has a problem: Excel, pictures, videos, Word, even Internet Explorer goes full page and centered.
    I un-installed Firefox and downloaded it fresh. It did NOT ask me to reboot my puter, so i didn't .
    I can supply pictures (screen shots) of the phenomenon on request.

    - Open Firefox -> got to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. You can enable the Add-ons later. Check if its working.

  • HT201412 Normally the screen of the IPhone turns with you when you turn

    Normally the screen of the IPhone turns with you when you turn the phone on it's side.  Mine has stopped doing that.  My phone works fine, the screen just wont turn.  How do I fix that????

    Check to see if the orientation lock is on. Do you see what looks like a small lock with a circular arrow around it near the battery icon in the status bar? Swipe upwards from the bottom of the phone to bring up Control Center. The orientation lock is the last icon on the top row right. It is a toggle, white is on, black is off.

  • The screen on the top gets distorted and then goes back normal like every 15mins

    the screen on the top gets distorted and then goes back normal like every 15mins

    try a pram reset,
    Mac OS X 10.7 Help
    Reset your computer’s PRAM
    A small amount of your computer’s memory, called “parameter random-access memory” or PRAM, stores certain settings in a location that Mac OS X can access quickly. The particular settings that are stored depend on your type of Mac and the types of devices connected to it. The settings include your designated startup disk, display resolution, speaker volume, and other information.
    Note: To print these instructions, open theHelp Viewer’s Action pop-up menu (looks like a gear) and choosePrint.
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
    Release the keys.
    Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
    Open
    AppleSupport article: Resetting your Mac’s PRAM and NVRAM
    AppleSupport article: Mac OS X: What’s stored in PRAM?
    Keywords: khelp kmosx7

  • I downloaded the latest update for my ipad and now it won't open.  the screen shows the itunes icon and a pic of the usb cable

    I downloaded the latest update for my ipad and now it won't open.  the screen shows the itunes icon and a pic of the usb cable

    That message means that you have to restore the iOS software because something went wrong. Follow the instructions here. I hope that you have a backup.
    iTunes: Restoring iOS software - Support - Apple

  • How can you get your music synced from iTunes to your iPod when a window pop ups on the screen saying"The iPod "Edward's iPod" cannot be synced. An unknown error occured (13019))?

    I had 429 songs already on my iPod Touch. When I was in the process of syncing a song from my iTunes Library on to my iPod, a window popped up on the screen saying, ""The iPod "Edward's iPod" cannot be synced. An unknown error occured (13019)). I click "Device" on my iTunes Library to make sure the song was in my iPod. It showed the song that was recently synced now listed under "Device", but when I physically looked for the song on my iPod Touch, it does not appear on there at all. It all started when I decided to put a Playlist I created in the iTunes Library and transferred it on to my iPod. Do you know why it may affected my syncing process and is there any way where I could get the syncing function back to normal so that I can continue adding songs on my iPod? Thank you for listening.    P.S. My iPod iOS version is 4.3.5.
    Message was edited by: edwardwashere

    Try here:
    iTunes: Error 13019 during sync

  • Ive had my macbook pro for a week now and when i cleaned the screen 4 days ago i found a little chip in the screen so the computer was definitely chipped at the manufacture or at the store but again its almost microscopic

    To whom It May Concern,i have my macbook pro its a week old and after maybe 2-3 days cleaned it and noticed a little chip in the screen when the light flashed on the computer. Also my charger sometimes just dose not work ill plug it in at a different outlet then it will work its very frustrating to have this many issues i would like to see if i could get a new charger that actually works and a macbook without a tiny chip in it
                                                                      Please let me know what you guys can do about it.
    Thank You,
    <Edited by Host>

    You are not addressing Apple, we are Apple users, like you.
    Take it to an Apple Store as soon as you can, you can return it within 14 days of purchase.

  • Hi I have used my macbook pro with miniport to HDM, and it was working fine.  Hadnt used it for a month and now when I connect the TV, the screen on the mac goes blue then back to the page but nothing comes up on the TV. Any ideas?

    Hi I have a year old Macbook pro.  I was using a miniport to connect it to the TV via HDM cable.   It was working fine but I have used it for a couple of months kept it in a drawer and now it doesnt work.  When connected to the TV the screen on the mac goes blue as though there is some signal then back to original screen but the TV doesnt show what's on the laptop.  Please any suggestions, thanks??

    Hello nothingissecret
    Check out the article below for troubleshooting steps to resolve the issue. One would be to try a different cable or adapter to test with the television.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • My apple tv is not working, the only thing showing up on the screen is the apple box with a white usb cord connected to it under the hdmi plug in and next to it is an iTunes sign- how do i fix my apple tv?

    my apple tv is not working, the only thing showing up on the screen is the apple box with a white usb cord connected to it under the hdmi plug in and next to it is an iTunes sign- how do i fix my apple tv?

    Restore.

  • HT4623 I updated my ipad 3 with the ios7 update. Now the screen shows the itunes icon and a pic of the plug in (as to plug into itunes)  I can't get it to go away or to access my ipad.  Any hints?

    I updated my ipad 3 with the ios7 update.  Now the screen shows the itunes icon and a pic of the plug in (as to plug into itunes)  When I do this it wants to restore my ipad, which I have already done.  I can't get out of this screen.  Any hints on what to do next?

    Something went wrong with your update; you are in Recovery Mode.
    Follow step 1 to 6 closely to recover your iPad.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times

Maybe you are looking for

  • Macfixit Guide to Installing an Upgrade like 10.4.8

    http://macfixit.com/ Update procedure recommendation We recommend the following procedure when installing Mac OS X 10.4.8. First, avoid performing any other operations (in Mac OS X or third-party applications) while the update process is occurring. I

  • Canon PIXMA MP140 Scanner not working in Windows 7

    I have been having problems in getting the Scanner function to work properly in Windows 7. This is the message I receive everytime I try to scan or preview a scan in Windows 7: Cannot communicate with scanner. Cable may be disconnected or scanner may

  • Filling entries in AUFK table

    Hi,    We want to add some new entris for the fields USER0,USER1,USER2,USER3 etc in AUFK (Order master table). Actually for these fields some body has changed the description by using a Access key in the DEV system. Now we can see the table in change

  • Tomcat 4.0.1 on Linux, system.out.prinln() not working

    I recently installed Tomcat 4.0.1 on RH Linux 7.2 and I am trying to develop some servlet- and JSP-based applications. I've set up everything according to the instructions, however, I'm finding that when I put a system.out.println(somestring) stateme

  • Installing BI EE

    Hi All, Thanks for helping me to start well in BI in my last post. My query is about performance when I install Oracle 10g DB and BI EE in P4 HT, 1 GB RAM machine. Will this hardware configuration is suitable for working or is it worth upgrading to C