A Solution to the error 'no permission to copy document here' (hurray!)

Since I posted my query about this annoying error, I've noticed lots of other people are plagued by the same problem.
As I have FINALLY received a response from and Adobe support person - hey, it only took 35 days! - I thought I'd share it here for anyone else to use.
Below are the instructions I received to correct the problem, along with my notes where the instructions were not clear.
Solution 1) Unauthorize Reader and Reauthorize it. (note that I couldn't reauthorize until completing Solution 2)
1) Open Digital Editions.
2) Connect the Reader and open it. (turn on the reader and connect it)
3) Press the keys Command + Shift + E on your
keyboard. (Control + Shift + E on a PC)
4) Now a Deauthorize screen will come up asking you
to deauthorize your Reader.
5) Follow the screen instructions and unauthorize
the Reader.
6) Now unplug the Reader and replug it.
7) Authorize Reader from the same Adobe ID which you
used to Authorize Adobe Digital Editions. (I did this but Digital Editions did not offer to authorize my reader until I had completed 'Solution 2' below, so you can just unplug your reader as per #6 above and carry on with step 1 below)
Solution 2) Modify the manifest.xml file located in My Documents\My
Digital Editions:
1) Quit Digital Editions
2) Make a backup copy of the manifest.xml (call it something like
manifest.good)
3) Open manifest.xml in notepad
4) It will appears as one big long line of xml, and you are looking for
a tag called start at the begginning of this
and select until you the end of the tag that looks called <(>
<<)>/de:deviceID> (yeah, this is garbled! It should say Look for a tag called <de:deviceID>, highlight and delete it. Go alt, edit, find and type in 'de:deviceID' without the quotation marks, notepad will take you right to the part you're looking for and you can highlight it and delete it. I found 2 de:deviceID's with a bunch of letters after them and deleted them both completely.)
5) If you have attached more than one Reader there may be multiple of
these. Delete all of them to make sure. like I said
6) Save the file (manifest.xml) and quit out of notepad
7) Ensure you have the Reader plugged in (Turn on and then plug in your Reader)
8) Launch Digital Editions
9) The Device Setup Assitant should come up.
a) Do NOT click on the "Don't ask again for this device" checkbox.
b) Do click on the "Authorize Device" button.
I am very happy to finally have the use of my Aluratek reader back. I missed out on quite a few requested library books that became available while I was unable to copy them to my Reader. Also I wasted a lot of time trying to get this sorted out. I have given feedback to Adobe that this seems to an issue that affects quite a few people and they they need to address it.
Hope this helps everyone stuck in that same annoying error-mode! 

A solution for Sony Reader to avoid Adobe's Nazi (and incompetent) lockout of about half the books you buy is as follows.
Close DE (or not) click on the READER drive in MyComputer that pops up when the Sony Reader is attached,
Bore down into the Database ->Media->Books  drag and drop in and out whatever pdf's or supported documents you like.
If you want them to show up in DE you can copy and author Digital Editions -> manifest.xml to include or remove your books
(make sure you make a backup of the file first).
Better just ignore DE completely and control your own book library.
Heil Adobe.
dtm

Similar Messages

  • No permission to copy document here please help me

    I have adobe digital editions installed and my computer authorized. I recently purchased a sony reader and authorized it thru digita
    l editions. My reader now shows up as a bookshelf in digital editions. I recently bought an ebook and had it download to adobe digit
    al editions. I can view the book fine within digital editions, but when I try to transfer the book to my reader for portability I ge
    t an error saying: No permission to copy document here. I thought by registering the reader thru adobe editions I would have portabi
    lity between adobe digital editions and my ONYX BooX 60 . Is there a step I missed so that my sony reader is authorized. I have the so
    ny reader touch edition ONYX BooX 60
    Browser: İnternet Explorer
    Operating System: Windows 7

    Permissions to copy ebooks are embedded in the ebook's datum by publishers
    and distributors.  They're not assigned by ADE and reinstalling ADE won't
    do anything to change that.  Reinstalling ADE could mess up your computer's
    files so that ADE won't work correctly.
    If ADE is working, and your ebook is on the MAC, you can look to see what
    permissions have been assigned.  When ADE is in Library view, click on the
    arrow next to the ebook's title.  You'll get a drop-down box that will
    contain 'Item Info'.  Click on that, and you'll see the permissions.
    There's nothing you can do about the nature of the permissions.
    ==============

  • Has anyone found a solution for the error "The iCloud Control Panel did not install properly".  I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar.

    Has anyone found a solution for the error "The iCloud Control Panel did not install properly".  I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar.  Cloud control panel version 2.0.

    Has anyone found a solution for the error "The iCloud Control Panel did not install properly".  I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar.  Cloud control panel version 2.0.

  • How can I correct the error Write Permission Open so that I can finalize a project in I Movie?

    How can I correct the error Write Permission Open so that I can finalize a project in I Movie?

    Post in the iMovie forum.

  • I have searched for solutions to the error 13019, but everyone with the problem doe'st manually manage their music like I do. I really don't want to have to sync and gothrough that mess. Help? solution for manually managing videos and music!!

    I have searched for solutions to the error 13019, but everyone with the problem doesn't manually manage their music like I do. I really don't want to have to sync and go through that mess. Please Help! solution for manually managing videos and music!!

    - Make an appointment at the Genius Bar of an Apple store and hear what they hae to say. It is free.
    Apple Retail Store - Genius Bar                          
    you can turn on Assistive Touch it adds the Power and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch

  • I am getting the error message "could not copy to requested location" to a drive i have been using for over a year... when I do the same thing to another drive - it works just fine. why?

    i am getting the error message "could not copy to requested location" to a drive i have been using for over a year... when I do the same thing to another drive - it works just fine. why?

    Possibly the drive is full
    Possibly the permissions are not set to WRITE permission
    Possibly there has been a "user mistake" and you think you are copying to a drive you have been using for over a year but something has accidentally changed and you're copying to a different location

  • Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)"

    When I try to package a file with a lot of links, the Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)". I am able to make a PDF of the same file, but when packaking the process fails every time. The app does not crash, just gives an error message. What gives?
    (I'm using a MacBook Pro Retina Display with 16 GB RAM, running OS 10.9 and all CC 9.1 updated with the latest patches).

    @John – that's really strange… the thing with the file names depending on the file type. That could eleminate Mavericks a bit from the equation and put the weight more on InDesign CC.
    Provided:
    1. You give it a go with InDesign CS6 v8.0.2 and tests are showing it will work fine in this regard.
    2. The same composite characters are present in both file types, the ai files and the PhotoShop ones. On a Mac OSX characters for files and folders can consist of "composite" components:
    ü for example is a two component one: the u and the two dots above the u. On a machine with MS Windows, this is not the case…
    InDesign CC was programmed from scratch for a 64 bit architecture. So it could be a severe bug in InDesign CC.
    Maybe other readers in this forum could test for these cases…
    Uwe

  • I just received the error message "Attempting to copy to the disk failed. The required disk cannot be found". When I try to sync my iPhone or iPad to iTunes. Anybody have any ideas? The sync worked yesterday.

    I just received the error message "Attempting to copy to the disk failed. The required disk cannot be found". When I try to sync my iPhone or iPad to iTunes. Anybody have any ideas? The sync worked yesterday.

    I'm having the same problem.  I just bought an album from my iPhone and when I select "Transfer purchases", I get the same message.

  • My solution for the "Error -50" and/or "Syncing" problem

    Hi
    After upgrading to iPhoto 5.0.2 I also had the "Error: -50" problem"
    How have I solved this problem => also with the help and tips from other forums.
    • Before the upgrade all my pictures from iPhoto were available on my iPod Photo (30 GB)
    • After the upgrade of iPhoto to 5.0.2 I received the "Error: -50" every time I tried to synchronize my iPod. Strange, strange, strange, ...
    => first I detected that putting pictures on my iPod starting from a folder (in stead of iPhoto) worked fine.
    Trying to change back to iPhoto did not work and no albums where available in the iPod Options view!
    => then I tried to create a new iPhoto library (press and hold Option(alt)-key while starting iPhoto), put some pictures and albums in it ... and even this did not work.
    What did I do to solve this problem!
    1. I thrashed my iPhoto application (DO NOT empty you trash, because you have to put it back again)
    2. I used "Disk Utility" to repair the disk permissions.
    3. I put back my iPhoto application from the thrash (same location as before - Applications folder)
    4. and did again a "repair disk permissions"
    5. then I tried to sync my NEW iPhoto library on my iPod and EUREKA this worked.
    6. Then I switched back to my original iPhoto library (launch iPhoto holding the Option key).
    7. Tried to sync ... again the same problem => no pictures and albums available in the iPod - Optoins - Photo tab.
    => conclusion : the problem has to be in my iPhoto library
    8. after trying many things (such as eliminating albums => trail and error method) I found the cause for my problem.
    => I used KEYWORDS in my iPhoto library with strange characters and had SMART albums using it. In my situation it was the "&" character.
    Replacing or removing this character solved my problem. All my pictures and albums were available in the iPod - Options - Photo tab
    9. Sync could be started ... Youpi!
    After synchronizing my iPhoto library I noticed that not all pictures were available on the iPod. I start looking which pictures that were missing on my iPod. When I found them I wanted to know why they were not synchronized.
    I found the explanation in the file "AlbumData.xml" in the "iPhoto Library" folder.
    If you open this file with TextEdit and search for this missing file then you'll find that (at least in my case) corresponding path does not exist (any more). And that was the case for each missing file!
    How solving this problem?
    1. I tried rebuilding the iPhoto Library => launch iPhoto holding the Option and Command keys. This did not work.
    2. What did I do?
    2.1. First I exported all my Pictures from the active iPhoto Library (Share - Export)
    => VERY IMPORTANT NOTE : all extra info such as "Key words", Albums, ... will NOT be saved!
    2.2. I created a new iPhoto Library (launch iPhoto holding the Option key)
    2.3. Then I imported all exported pictures.
    => if you check the file paths in the AlbumData.xml file, you'll see that this info is correct!
    2.4. At least I recreated (manually) all "Key words", Albums, ... so I had a duplicate of my original Library.
    I hope this also works for other people with the same problem.
    Greetings
    P@nt@ni

    Here my solution for the itunes' "unknown error -50" and not showing any albums in the prefs' tab:
    1. All rebuilding options in iphoto didn't resolve the problem.
    2. I opened the file "AlbumData.xml" in the iPhoto-Library-Folder with a text editor. I figured out, that the problem wasn't in the Albums, but in the "Master Image List"-Section. They look like this:
              <key>1741</key>
              <dict>
    .. titles, filenames, ....
    </dict>
    After making a backup of this file, I started deleting entries here (you know, the fastest way to do it is to split it always in halves and check in iTunes if the error still exists). After about half an hour I got the problem key.
    3. The problem was: Some (curious) white spaces at the BEGINNING of the comment! Curious, because they weren't visible in iPhoto's comment, but I could delete them in Iphoto! I guess they weren't normal space characters, but any special symbols (line feeds? whatever)
    4. After that, the -50 error was gone. Now I could see the Album Names. But the sync stopped after a while with a "... file not found...." - error.
    5. Again, with trial&error I found out, that 4 pictures in the last 3 months' rolls made this second problem: I just duplicated them in iPhoto and deleted the original ones. So I still don't know why they have produced this error... anyway,
    6. Now all of my photos sync well.
    .. well, the whole story took me 2 evenings. I really didn't switched to Mac to play debugger for Apple. Do they read these groups here or do I better write them anywhere? They should get those problems fixed asap! As far as I read in the groups, those errors do exist quite a long time?!
    My versions:
    iPhoto 5.0.4 (263)
    iTunes 5.0.1 (4)
    OS X 10.3.9
    iPod Nano 1.0

  • What is the solution to the 'error 207"? I need help please.

    For over a month now my computer has been unable to get past the 8% mark on the Progress Bar during the Adobe Creative Cloud update! Error Message often stating Server unavailability! And "Error Code 207". Can someone please help  me get out of the trouble?
    Accept my fullest gratitude for your help and time.
    Adolf

    Sign in, activation, or connection errors | CS5.5 and later

  • Any solution to the "Error in playing video" problem when trying to play YouTube videos on DVR?

    Tech. support said they updated the firmware on my DVR remotely, but that didn't do anything.  I see other people are having issues.  Does anyone have a solution, or has anyone had tech. support actually fix the problem?  Thanks.

    it's definetely a Media manager thing,  make sure you have the absolute latest and greatest media manager (tech support will tell you to make sure of this too)   
    then make sure you add VerizonMediaManager.exe and VZVideoAgent.exe to the firewall exception list in all the firewalls on your machine (meaning windows firewall plus whatever firewall you have installed // mcafee, norton, trendmicro, kaspersky etc....)
    Also let us know if the sample videos work and it's just youtube that doesn't, or do the sample videos not play either?
    if sample video's play then youtube should really work and vz may have to have their it guys look at it.
    if the sample videos's don't work then it's probably the firewall thing I mentioned above.  the sample vid is included in the Media Manager PC installation kit.
    try this if as well, I found this on their website.
    Media Manager Troubleshooting guide : https://www36.verizon.com/MM/fiossupport/Index.shtm
    Also some virus protectors like eset and avg see verizon media manager as a threat and terminate the connection.  this link gives you a couple work arounds to fixing that.

  • TS3354 What is the solution for the error message when playing movies on a windows computer that doesn't support HDCP?

    How do I make my Windows computer Dell Latitude E7440 play the movies I just purchased? I am getting the message, "To play this movie in HD, your PC must have Windows 7 and a built-in display or a display that supports HDCP."
    Is there a fix or solution ot this problem? Please help!

    Hello Mendeezee,
    Depending on the age of the monitor, you may not be able to playback any HD content that is purchased in iTunes. One way to check is to download the SD version that comes with the HD version. Check out the articles below for more clarification. 
    iTunes for Windows: Unable to view or play HD video content that requires HDCP
    http://support.apple.com/kb/ts3354
    iTunes: Purchasing and viewing HD videos
    http://support.apple.com/kb/HT3209
    In iTunes for Windows, in order to view HD content, both the display hardware (computer screen, LCD, external monitor, and so on) and video card driver must support HDCP.
    Note: Depending on your computer's hardware limitations, you may be unable to purchase, rent, or view HD content from the iTunes Store. If you are trying to view HD video on an external display, the display must have a digital connection (DVI, DisplayPort, or HDMI) and support HDCP.
    Regards,
    -Norm G. 

  • I am unable to open documents ending with .doc (rather than docx, which I can open). The error message states "[name of document]" is being used by "another user." Do you want to make a copy? Help!!!

    How can I open a Word document, when I receive this error message "[name of document]" is being used by "another user." Do you want to make a copy?
    (This only occurs on the documents I have saved as .doc; the ones saved as "docx" open for me. Help!

    Did you recently reinstall the OS then copy all your files back over? Do a Get info on one of the documents and see if your current UserName is listed and has Read & Write permissions. If not select the Documents folder and check that for Read & Write permissions for your UserName. If it doesn't have R & W permissions Add it so it does.

  • Signal analysing program faces different signal processing errors while the mentioned settings in the error solutions are correct!!

    I am trying to get 4 signals from my bluetooth  which is connected to a sensor. later on I need to analyze the signals for calculating heart beat and blood oxygen saturation. when the labview reads the data it has no errors but anyway the peak detecor doesnt work. my sampling rate is 100. anyway I get different signal processing errors like 20023 and 20037 and 20041, 20015. but when i check the solutions for the errors, they dont help me at all. like error 20023 complains about low and high cut of frequency while mine is set correctly could you please check it for me
    Attachments:
    shift final - Copy.vi ‏458 KB

    Mistaken wiring here- after BD Cleanup (Ctrl-U)
    Error -20037 occurred at an unidentified location
    Possible reason(s):
    Analysis:  The number of data points in the Y value array must be greater than the order value.
    Jeff

  • Ipod touch error message-"attempting to copy to the disk "dad" failed....

    I have an 8 gb ipod touch. My ipod is called "dad". I have dragged songs from the library to my music and will receive the error message "attemtping to copy to the device 'dad' failed. the device is not connected. I can see the device on itunes...not sure why it is seen as not connected. Note one thing. If I unplug my ipod or turn it off and on it will work for 5 or 10 songs properly...and then stop working and give me the error message above. I have tried restoring on iunes and that did not work. Does anyone else have any advice

    i am also having this problem. i have only tried with apps and music. it starts to sync, does a couple, then just disappears from itunes. the ipod touch still says sync in progress though.
    i have tried restoring multiple times, i have tried doing it in dfu mode, tried different ports. its a 1g 16gb ipod touch.
    i see im not the only one having this problem. so what is the solution apple?
    i love how its our fault. i have always taken good care of my ipod. if i take it to an apple store they would not repair whatever is wrong because my warranty ended in november.
    thanks apple...

Maybe you are looking for

  • Best practice for using remote control under limited rights?

    Hi. We are getting ready to take admin rights away from our users and make them standard users. We plan to utilize Zen for most of our in-scope applications so that we can allow users to install supported software. There is usually no problem in that

  • Why wont my iphone connect to my lapptop?

    MY iPhone will not connect to my computer, and I dont know why. It says its unspecified. Please help me!

  • Air 3.3 - iOS

    So I have built my app using the latest air 3.3 sdk.  Debug works fine, release build doesn't make it past the splash screen on iOS devices.  Release build for Android works fine, and well, there's no point trying on playbook since they don't even su

  • Adobe CC all applications will not install

    Whenever I go to download something it gets to about 42% then I get this error ( http://prntscr.com/5jhg1n ) I have restarted my computer 4 times, closed all CC operations inside task manager and restarted. None of it is working. I'm a Graphic design

  • Flash Builder 4 beta & PostgreSQL ?

    I ask to explain how to do them friends  How to connect. The use is in example ?