A Start Doc Print call was not issued - error appears

Hi
HP M1136 MFP used on windows Vista for over one year. Software reloaded using HP-CD supplied. Now "A Start Doc Print call was not issued" - error appears whenever print command from MS-Word, Excel or DF or even notepad is given

rrhp,
Welcome to the HP Forum.
You might wish to remove (from Programs and Features) and then reinstall your Full Feature Software:
HP LaserJet Pro M1136 Multifunction Printer Drivers
Find the Full Feature Software in Category "Driver - Software Installation Software"
Restart / Reboot the computer after the software installation is complete
Next, if you have not done so, take a look at the Firmware Update for your printer; check Category "Firmware".
NOTE: You will want to install the Software first, then perform the firmware update on the printer.
Finally: If you like, you can update / check the tools in Category "Utility - Diagnostic Tools"
Hope this helps.
Click the Kudos Star!
It is a great “Thank You” for the Experts who offer to help!
Kind Regards,
Dragon-Fur

Similar Messages

PDF error: a start doc printer call was issued. PDF on Ne11.

adobe version. 6.0 pro
when converting any doc to PDF it comes up with error. you file could not be printed due to an error on Adobe PDF on Ne11.
-i tried to resinstall the app no luck.
-tried in Word, excel, Autocad noluck.
- i have several other machines and it works fine.
Please help!
Thanks,
Mike

Sorry for the delay, May I know the version of Microsoft Office you are having? I got your screen shots. Acrobat 6 Pro is compatible with AutoCAD 2000, 2000i, 2002 (but not 2002 LT), and 2004. You are having 2007 version. Again for Microsoft Office compatibility please check the link below. Make sure the Acrobat 6 is compatible with the Office and AutoCAD you are having.
http://kb2.adobe.com/cps/333/333504.html

A startDocPrinter call was not issued

I had setup a printer on another computer in another room which is connected to the same hub as mine. everything seemed to work fine for a few printing tasks. All of a sudden I started to get this error message and do not know why ("A StartDocPrinter call was not issued" ) I have tried everything in the book .!

Hi ParaChaser,
Thank you for visiting the HP Support Forums! I understand you are getting an error on your computer 'A StartDocPrinter call was not issued'. To better assist you can you please let me know the following:
1. What are you trying to do when you are getting this error? (At start up, printing a document, which program?)
2. What is your current Operating system, Windows or Mac and which version?
3. What is the Exact model of HP Printer you are using?
4. Are you connected USB or Wireless?
If you are using a Windows OS, take a quick look here: Some Error Messages When Printing in Windows, if you have a password setup for the Windows printer share this could be the cause.
Try running the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know the outcome of the PSDR. I will watch for your reply.
Thanks again,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.

I recently tried to download the latest version of iTunes, but an error occured during the process. It was recommended that i reinstall iTunes to attempt to correct that problem. After I attempted to reinstall, an error came up with the title "iTunes.exe - Unable to locate component." the body of the error message read "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." When I click "Ok", another error message pops-up reading "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)". I tried reinstalling iTunes 3 times now, each time with the same result. What is going wrong, and what do I need to do?

Kappy, I completely overlooked your original response due to it's small, one line nature and poor UX design of the area surrounding the message area.
Upon following the complete instructions linked from the link you posted (http://support.apple.com/kb/HT1923?viewlocale=en_US&locale=en_US), my first attempt resulted in everything being installed except for iTunes. So trying yet again.
I do have Safari for Windows Vista installed, which is why I could not delete everything in the C:\Program Files\Common Files\Apple\ folder. I'm guessing this is Apple's way of completely removing Safari Win from history (there's always an under-the-table reason when something like this happens with Apple installs, they just won't say it publicly). Uninstalling Safari. Uninstalling Safari removes the remaining "Internet" files from C:\Program Files\Common Files\Apple\
Uninstalling iCloud. Uninstalling MobileMe Control Panel that was never used. That leaves only QuickTime installed as an Apple product on my machine.
Just for the record, I did not have this folder: C:\Program Files\iPod\
Emptied the Recycling Bin.
Shut down and fresh start-up.
Install attempt again: results in the installer saying something interrupted it (no other programs open)
Installing again immediately after error: Success
Clearly there are issues with this installer.
A pop-up shows up with "The registry settings used by the iTunes drives for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burining software. Please reinstall iTunes"
No other CD burning software installed other than what came pre-installed by Gateway and a install of Windows Vista Pro (or whatever the top expensive one was called).
iTunes launched. iTunes Library, items like Movies & Music, and playlists are still intact and usable.
Good thing I don't have these issues on my Macs (ahem, which is why these errors are allowed to persist by Apple to discourage Microsoft/Windows/PC use and purchase, all about the money and Apple has become the non-caring giant it once sought to overthrow as the underdog, miss those days).
Thanks Kappy. Thanks for the time suck Apple.

Printer driver was not installed. operation could not be completed

Adobe Acrobat 9.3.1
windows XP system.
Cannot add the Adobe PDF printer get the error message:
Printer driver was not installed. operation could not be completed
Software installs/repair try to install the Adobe PDF printer but they do not. No error message; just that the Adobe PDF printer does not show up
I tried adding the Adobe PDF printer manually.
The drivers start to load and then fails giving the error message in the subject line.
I cleared the print spoolers and rebooted.
I have uninstalled Adobe Acrobat /rebooted/reinstalled. Install says it adds the Adobe PDF printer but nothing happens.
Problem exists for all users including Administrators.
I have renamed the C:\WINDOWS\system32\spool\drivers\w32x86 and C:\WINDOWS\system32\spool\drivers\Printers folder.
Both are recreated when I try to reinstall the Adobe PDF Printer.
I can add network printers with no errors.
I have cleared Adobe PDF printer from registry. e.g.:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3\Adobe PDF Converter
I even imported Adobe PDF registry entry from a working system taking care to adjust the system values accordingly.
I also verified permissions for registry keys and application/driver folders were set correctly.
I have completely reloaded the installation software and imported the Adobe PDF drivers from a working system.
Not sure if this an Adobe issue, but that appears to be the only printer I cannot re-add.
Any constructive ideas on what to try next would be appreciated.

When I upgraded to Reader 9.4 I lost all ability to print Adobe pdf's. Finally uninstalled 9.4, re-installed 8.2, changed the filename "high quality.joboptions" to "Adobe PDF converter.joboptions" and was back in business. Pretty screwey fix, but after getting no help from online chats with Adobe and a day's lost work I was happy to have it.
[email protected]

New Epson WF 7620 will not print with Macbook Air, receive "Print File Was Not Accepted" message.

Hello! To anyone who tries to help me, thank you in advance!
I brought home a new Epson WF 7620 yesterday and did all the necessary stuff, installing it with my Macbook Air (Mac OS X ; 10.7.4.). I installed the software from the site, added the printer to my printer list, enabled "print sharing" and connected it to my wifi network. I am trying to use it wirelessly.
I tried to print a test page of a regular PNG image, but I am receiving the "Print File Was Not Accepted" message in my printer queue. I have changed the file type a couple times to JPG and PDF but more of the same. I have also reset the printer, and have repaired the disk permissions in the Disk Utility to try and get it to work.
None of this seems to be working, suggestions very appreciated!
Thanks
MP

Try Linc's suggestion first. That should cure your issue. If not, here's something else to consider:
PrinterMaccer wrote:
I installed the software from the site ...
Apple keeps a set of current software for Epson printers. You should start by going to System Preferences > Printers & Scanners and delete the printer from the list (using the "-" key). Then download Apple's software version from here:
Epson Printer Drivers v2.18 for OS X
Finally, set up the printer as shown here:
OS X: Connecting a Wi-Fi printer to your Wi-Fi network

I was updating Firefox from version 6 to version 7, after updating I tried to open Firefox and the message I got is this: This application has failed to start because xul.dll was not found. How can I fix this?

I was updating Firefox to the newest version 7.0.1 from version 6.0.2 I think it was, I clicked the restart Firefox button that always comes up after updating. It started updating and then Firefox never restarted like it was supposed to after it was done updating. I then tried to open Firefox and it told me "This application has failed to start because xul.dll was not found." I did have Firefox crash on maybe about 30 minutes or so earlier which bothered me because I have been using Firefox for years and never had it crash on me before but I didn't think much of it at the time it happened because I was able to go back onto Firefox and finish what I had been working on. A while later I checked for updates and updated. The first time I tried to update it didn't work though so I had to shutdown Firefox and reopen Firefox and start the update a second time. It was after the second time that when I tried to open Firefox I got that message about failing to start because xul.dll can't be found. I filed a crash report when my Firefox crashed. This would have been around 1am-2am in the morning that Firefox first crashed and then wouldn't allow me to open it after updating. I have a DELL laptop running the Windows XP operating system but the laptop is probably at least 6 or 7 years old. The laptop will no longer charge so I always have to have it plugged into an outlet. Both my laptop hard drive and my external hard drive give me messages that I am running out of disk space on my hard drive. I bought this laptop 6 or 7 years ago second hand so it could be even older. In short it's a piece of crap and it gives me all kinds of issues but I currently can't afford a new one, but I have never had any problems with Firefox and I use Firefox more than any other aspect of my laptop so it's really really bothering me. May you please help me fix it?

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

Bridge CS3 (Windows XP) fails to start because Symlib.dll was not found

Bridge CS3 (Windows XP) fails to start because Symlib.dll was not found? How do I fix this? I've re-installed and the auto updater has run...I even downloaded and ran the patcher application? By the way Bridge CS3 doesn't show up in the CS3 program list in the start menu but it is installed in my program files - I've tried launching it directly from there as well. Bridge CS2 is operating just fine.
Update: I installed and ran the Adobe Support Advisor, resulting in - Issues: "The module found no solutions to report for the selected log file."
I tried to package the report and the error read: "The size of the package is too large to be handled with the current configuration! Please contact Adobe Support for additional information."
I opened a web based report/case number at the Adobe Support Portal about the missing Symlib.dll (including the Adobe Support Advisor error). Their response was: We regret to inform you that complimentary support for your product is not available and/or has expired.

Did Bridge work before? If so, reset preferences by holding down the Ctrl key when starting Bridge. If successful you will get a Reset Window, choose all 3 options.

This application has failed to start because SapNi.dll was not found

On the advice, good advice, of Melanie and Lars, here is a new thread for my question.
I'm assisting with a migration of SAPDB, on Windows Server 2003, to MaxDB 7.6.xx on Solaris 10 SPARC.
I can connect to my SAP DB 7.3.0.35 using Database Manager 7.4.3.23 as superdba. Now I'm trying to use the dbmcli.
I go to the server and pop open a cmd prompt and try it via dbmcli:
dbmcli -d sdb -u superdba,<password>
And I get a Windows dialog box that says
This application has failed to start because SapNi.dll was not found. Re-installing the application may fix this problem.
Hello,
actually, the SUPERDBA user only has ONE valid password. Although he is able to perform admin tasks and to execute SQL statements, there are not two passwords for this user!
So if you are able to connect with that user with dbmcli and not with sqlcli or loadercli, there seems to be something wrong with your system/users. Maybe the user called SUPERDBA on your system is not really the SYSDBA but a 'normal' dbm user.
When you connect with that user with dbmcli, please execute the following commands:
sql_execute select user from dual
sql_execute select SYSDBA from dual
sql_execute select * from users
Can you also connect with user control with dbmcli? You might want to check the default password (control).
Regarding the ni.dll problem: If I understand that correctly, you installed Database Studio locally on your PC. Did you also install any othe MaxDB software on that server? When you try to use dbmcli to connect to a remote database, you'll have to specify the -n <hostname> option. Or did you get that dll error on the database server itself?
Database Studio cannot be used to administer databases of version 7.3. You'll have to use DBMGUI or dbmcli for that.
Best regards, Melanie
Hi Melanie, Thanks for the response.
I cannot use dbmcli at the moment. I get the Windows dialog box saying
This application has failed to start because SapNi.dll was not found. Re-installing the application may fix this problem.
I am using dmcli on the Windows 2003 Server with my SAP DB 7.3 installed. Here is the version of dbmcli that I'm using.
C:\sapdb\SDB\db\bin>dbmcli -V
OK
version,os,dbroot,logon,code,swap
"7.6.06","WIN32","C:\Program Files\sdb\7606",True,ASCII,2
I'm going to try to do what the error message tells me and uninstall and re-install my DB management applications.
Thanks,
Rich

Server Utilities           c:/sapdb/programs                             7.7.06.09     32 bit    valid
DB Analyzer                c:/sapdb/programs                             7.6.06.03     32 bit    valid
PCR 7300                   c:/sapdb/programs                             7.3.00.35               valid
PCR 7301                   c:/sapdb/programs                             7.3.01.09               valid
PCR 7104                   c:/sapdb/programs                             7.1.04.43               valid
MaxDB PHP Driver           c:/sapdb/programs                             7.6.06.03     32 bit    valid
PCR 7240                   c:/sapdb/programs                             7.2.04.17               valid
Synchronization Manager    c:/sapdb/programs                             7.6.06.03               valid
Base                       c:/sapdb/programs                             7.7.06.09     32 bit    valid
Redist Python              c:/sapdb/programs                             7.6.06.03     32 bit    valid
JDBC                       c:/sapdb/programs                             7.6.05.06               valid
Messages                   c:/sapdb/programs                             MSG 0.8215              valid
ODBC                       c:/sapdb/programs                             7.6.06.03     32 bit    valid
Database Kernel            c:/program files/sdb/7606                     7.6.06.03     32 bit    valid
Database Kernel            c:/sapdb/programs/databasestudio/utilities    7.7.6.9                 valid
Database Kernel            c:/sapdb/sdb/db                               7.3.00.35     32 bit    valid
Loader                     c:/sapdb/programs                             7.6.06.03     32 bit    valid
SQLDBC                     c:/sapdb/programs                             7.6.06.03     32 bit    valid
PCR 7250                   c:/sapdb/programs                             7.2.05.24               valid
xinstinfo
IndepData           : C:\sapdb\data
IndepPrograms       : C:\sapdb\programs
dbmcli -s dbm_version
OK
VERSION    = 7.7.06
BUILD      = DBMServer 7.7.06   Build 009-123-202-944
OS         = WIN32
INSTROOT   =
LOGON      = True
CODE       = UTF8
SWAP       = full
UNICODE    = YES
INSTANCE   = (unknown)
SYSNAME    = Windows Server 2003 family
MASKING    = YES
REPLYTREATMENT = none,zlib,auto
SDBDBM_IPCLOCATION = C:\sapdb\data\wrk
Edited by: Rich Evans on Jun 16, 2009 4:13 PM

My i tunes is not working anymore. it says the application failed to start because MSVCR80.dll was not found. I have tried re-installing the program but it doesn't work.

Hello,
Yesterday I tried to get onto iTunes and was unable to. I keep getting this message:
Itunes.exe - Unable to locate component.
This application has failed to start because MSVCR80.dll was not found.
Re-installing the application may fix this problem.
I have tried to uninstall and re-install the program several times but cannot get it to work. Now I get this message:
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
I have tried to do what I can but am not really iTunes savy and would like to get this issue resolved. Can anyone help me?
THANK YOU!!
Cyn

Hello there, Cyn.
The following Knowledge Base article provides some great information for troubleshooting your issue. Keep in mind uninstalling and reinstalling has to be done in a very specific fashion, therefore use the guidelines from this article to accomplish this:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

HT6001 I have tried numerous time to update iTunes to Version 11.1.4. Each time it has failed. I get the message of "This application has failed to start because MSVCR80.dll was not found". Also I get a message of "Error 7". Advise please.

I have tried numerous time to update iTunes to version 11.1.4. It has failed every time. Now I can't even get into iTunes on my PC. The message I get is "This application has failed to start because MSVCR60.dll was not found. Re-installing the application may fix the problem." Okay. Which application? What steps are needed for this process?
Also, I get this message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)" Could someone please assist me in the steps necessary to remedy this issue. Thanks.

For many users at this point in time (iTunes 11.1.4.62) uninstalling iTunes alone is not enough and they may need to undertake further steps...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

HT1926 I try to download Itunes and when i am done it i tried to open it and it said "This application has failed to start because MSVCR80.dll was not found. re-installing the application may fix this problem"

i tried to open itunes and it said "This application has failed to start because MSVCR80.dll was not found. re-installing the application may fix this problem" and "itunes was not installed correctly. please reinstall itunes. Error 7 (windows error 126)" what does this mean and how do I fix it? I reinstalled itunes and this just popped up again :C

See Troubleshooting issues with iTunes for Windows updates.
tt2

I had itunes installed on my pc. I received notice to update. I started update but gpt the following message - this application failed to start because MSVCR80.dll was not found. Reinstalling may fix the problem. I uninstalled and have tried to reinstall

I already had itunes installed on my pc. I received an update and tried to install it. I got a message
This application failed to start because MSVCR80.dll was not found. Reinstalling may fix the problem.
I uninstalled itunes and tried to reinstall. itunes says it has installed but when I try to open itunes I get the same message.
How do I repair/sort out this error/fault
Thanks
David

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?

After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?

See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

Hp laserjet printer pro m1217 print file was not accepted Mac

Hi
I connected my printer wirelessly via Bonjour. It is connected but for some reason doesn't print, giving me an error message: "print file was not accepted."
Any help is greatly appreciated.
David

Hi Djcain
I understand your HP Laserjet m1217 is setup wirelessly but wont print from the the mac and you are getting a error message "print file was not accepted".
If your are using 10.8 then make sure when you added the driver you added the printer name m1217 and not the airprint driver that is preinstalled on the mac.
Please provide the Mac operating system you are on for further assistance.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

A Start Doc Print call was not issued - error appears

Similar Messages

Maybe you are looking for