A storage transient failure has occurred during content conversion
Hi,
I have Exchange 2010 SP3 installed on Windows server 2012.
External invites are not processing, and return with Source Contex "StorageTransientFailureDuringContentConversion".
This is cause a great problem in our enviroment...
Some suggests?
Att
Paulo Nunes
What version of Exchange 2010 SP3 do you have? RU4 for Exchange 2010 SP3 has been released -
KB2905616 .
RU3 is supposed to fix this particular issue, RU4 includes that fix as well.
Previous support forum question on this -
http://social.technet.microsoft.com/Forums/en-US/fd7ef80e-f80b-47ed-883b-a34511c6233c/a-storage-transient-failure-has-occurred-during-content-conversion?forum=exchangesvrsecuremessaginglegacy
JAUCG - Please remeber to mark replies as helpful if they were or as answered if I provided a solution.
Similar Messages
-
Greetings,
We seem to be having a problem with some users who are attempting to send e-mails from within the organisation to an external domain. Not all users are affected, and not all outgoing e-mails have this issue.
Some e-mails get stuck in the submission queue. This is the error message in Last Error : "A storage transient failure has occurred during content conversion."
Days later, the internal user who send the message gets a #550 4.4.7 QUEUE.Expired; message expired ## NDR.
We did have some initial configuration issues, but these were fixed more than a week ago :
- The external FQDN during EHLO was set to the wrong address, now pointing to the correct one.
- SPF record was updated with new IP adress.
Here is some additional information on the issue :
- Not on any blacklists - checked using dnsbl.info
- Telnet to remote servers works from exchange server, connections are accepted and can send mail.
- Outbound SMTP test ran using Microsoft Remote Connectivity Analyser : Passed with both External (Static) and Smarthost IP.
- This seems to happen only with emails that have an attachment and that are transfered, but only for the affected users.
- If content from these e-mails is manually copied over to a new email, email is sent to destination without problem.
Configuration information :
- Exchange 2013 running on Windows 2012 Datacenter with all latest updates.
- Outgoing e-mail is sent via smarthost. Only one outbound transport rule is active.
- Using internal DNS server.
- There is only one mailbox database.
Thank you for taking the time to read this!On Wed, 16 Jan 2013 15:31:14 +0000, Ipigi wrote:
>Sorry, I often get some terms mixed up when I explain things as our users use the French version of outlook.
>
>E-mails are not transferred, but forwarded manually from their outlook. Message format in outlook is set to HTML and not Rich Text when they foward the e-mail.
Do they forward the message as an attachment?
>When forwarded internally, this is in the internet headers :
>
>Content-Type: application/ms-tnef; name="winmail.dat" Content-Transfer-Encoding: binary
Within your organization I'm prety sure that messages will use TNEF.
What does the message contain at the external recipient's side?
>It really seems to me that Exchange is not converting RTF to Plain Text. The first link you provided states in it's final paragraph that Exchange should be doing this conversion.
If you can, try creating a mail-enabed Contact for one of the external
recipients and set the message format on that.
>If I disabled TNEF as that link suggests, offending messages will get stuck in the submission queue again.
>
>I thank you for your help so far. This is not an issue I've had with any previous installations/migrations of Exchange that I have done.
>
>Please let me know if you need any additional information.
Have you tried UNsetting TNEF on the remote domain?
Set-RemoteDomain Default -TNEFEnabled $null
That should leave it up to the client to determine the format. It's
probably not what you're after, but see it makes a difference in the
format.
Rich Matheisen
MCSE+I, Exchange MVP
--- Rich Matheisen MCSE+I, Exchange MVP -
CRM 2011+An error has occurred during report processing. (rsProcessingAborted)
Hi,
i have installed CRM 2011 on-premise version in Server A. Database and CRM 2011 Reporting Extenison in Server B. Both the server are 64 bit server and IIS 7.0 . i can able to browse the Report server url. USer as been added in Sql DB Logins and
as permission to Reportserver and ReportservertempDB.
i can able to access the CRM Reports only using Admin Credenttials that is from the credential which Report server is installed and configured
Error in server 1:
Web service request SetDataSourceCredentials to Report Server
(http://servername/Reportserver_XXXSQLSRVR)failed with SoapException. Error: An error has occurred during report processing. (rsProcessingAborted).
Error in Server 2: took this error From error log file
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Data source 'CRM': An error has occurred. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: An exception has occurred in data source 'CRM'. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: i INFO: DataPrefetch abort handler called for Report with ID=. Aborting data sources ...
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'.
---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException: Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
Eventvwr error in server 2:
Failed to unload app domain DefaultDomain. The following exception occurred: Error while unloading appdomain. (Exception from HRESULT: 0x80131015).
I tried the Following ways to fix it
1.added User as content manager
2.In CRM apppool i have Admin in identity column
its really paining when i'm unable to access the CRM 2011 Default Reports. got stucked for a day.
Thanks, Saraswathy KumaraveluHi All,
I encountered this same issue today after installing CRM 2011.
CRM 2011 on Server A
SQL and SSRS 2008 R2 on Server B
I found that I got the same errors described here when running the standard reports even after I had installed the Reporting Extension (CRM 2011 replacement for CRM 4.0 Data Connector). The reason I got the error was because the 'Data Source Type' had not
been updated in Report Manager.
Here's how I resolved:
1. Browse to Report Manager (http://SERVERB/Reports)
2. Open the Organisation_MSCRM folder
3. Click Show Details
4. Open the MSCRM_DataSource
5. Change the Data Source Type from Microsoft SQL Server
to Microsoft Dynamics CRM SQL
*Note: - This option is only available once Reporting Extension has been installed on SSRS Server.
6. Clear the contents of the Connection String box
7. Set the Connect Using: option to Credentials Supplied by user running the report
but do NOT check the
Use as Windows Credentials when connecting to the DataSource option.
8. Click Apply
9. Restart the SQL Reporting Services Service in
Reporting Services Configuration Manager
10. Test by running one of the Standard CRM Reports (e.g. User Summary)
Ta Da!! - Success!!
Hope this helps! -
Exception has occurred during data insertion ... Wrong number of parameters
I am using an ADO dataflow source and an ADO dataflow destination to move data from a table on an IBM iSeries DB2 database to another IBM iSeries DB2 database on another machine. The connection managers for source and destination both use .Net Providers\Odbc
Data Provider with the Data Source Specification being ODBC connections specified on the Windows Server 2008 r2 machine hosting bids. All the test connections work...so far so good.
Issue is when I execute the control flow task the rows get picked up from the source DB2 database no problem but it fails on the insert to the destination DB2 table...The progress tab specifies the exceptions...
[ADO NET Destination [601]] Error: An exception has occurred during data insertion, the message returned from the provider is: ERROR [07002] [IBM][System i Access ODBC Driver]Wrong number of parameters.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "ADO NET Destination" (601) failed with error code 0xC020844B while processing input "ADO NET Destination Input" (604). The identified
component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the
failure.
I put a data viewer on the data flow connection and the records I expect are getting picked up and look ok. I checked to make sure the source and destination tables have the same number of columns in their record layout and identical data
types and they look fine.
Could someone kindly tell me whats going wrong? Does the error message indicate that some of the columns are getting dropped from the dataset before the insert?
Thanks much in advance for any help, RoscoeHi Roscoe,
Glad to hear that you have found the root cause. So, the issue occurs because numeric values with no decimal cannot be inserted into the Decimal data type column in the DB2 table. In SSIS, data type Decimal of DB2 database is mapped to data type DT_NUMERIC.
To address the issue, you can do a data conversion for the column in question to define its precision and scale such as DT_NUMERIC(9,2) by using the Data Conversion Transformation before the ADO NET Destination.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support -
A bluetooth serial failure has occurred?
Hi,
After playing around for a while, I finally got my Nokia N82 to work as a modem on my MacBook Pro using scripts from http://www.taniwha.org.uk
But after 30mins online I was disconnected and now if I try to connect again I get the following dialogue:
A bluetooth serial failure has occurred.
Failed to open an RFCOMM serial channel. Check if authentication needs to be enabled in your device.
The only thing I understand about this is the authentication part. My phone is set to automatically allow all connections from my computer.
Any idea what is going on?
Any help is appreciated.I'll take a shot. Who is your cell phone provider? Did you look at the modem scripts in /Library/Modem\ Scripts for Nokia one(s). There are some. Possibly generic that would work. To make this simple, since it is late, #1 here is system log of my Panther and LG phone using one of above mentioned scripts.#2 And the link is an older one about doing the same type connection and the problems with Verizon. But then I never had same error message you got. I searched on that error and it appears that rfcomm can loop and the way to fix that is to bind to more channels which I am not sure how, since the only thing to change , it appears is in bluetooth preferences. I would not touch that, yet. The problem on configs, I believe, is the property is propriotory(spelling?). Or the channel is in the phone settings. Anyway I would try a different modem script in the Library and also check out the other links in #2.
#1
16 01:51:19 localhost pppd[6009]: Sent 14395 bytes, received 83280 bytes.
Oct 16 01:51:21 localhost pppd[6009]: Exit.
Oct 16 01:51:46 localhost pppd[6050]: pppd 2.4.2b1 started by root, uid 0
Oct 16 01:51:47 localhost /usr/libexec/CCLEngine: Starting Apple Verizon Support CCL
Oct 16 01:51:47 localhost /usr/libexec/CCLEngine: Connecting to Network
Oct 16 01:51:49 localhost pppd[6050]: Serial connection established.
Oct 16 01:51:49 localhost pppd[6050]: Using interface ppp0
Oct 16 01:51:49 localhost pppd[6050]: Connect: ppp0 <--> /dev/cu.usbmodem3B11
Oct 16 01:51:51 localhost pppd[6050]: local IP address 70.193.4.227
Oct 16 01:51:51 localhost pppd[6050]: remote IP address 66.174.27.4
Oct 16 01:51:51 localhost pppd[6050]: primary DNS address 66.174.92.14
Oct 16 01:51:51 localhost pppd[6050]: secondary DNS address 66.174.95.44
Oct 16 01:51:51 localhost configd[89]: posting notification com.apple.system.config.network_change
Oct 16 01:51:51 localhost mach_init[2]: Server 2227 in bootstrap d03 uid 0: "/usr/sbin/lookupd": exited as a result of signal
1 [pid 6030]
Oct 16 01:51:51 localhost configd[89]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/set-hos
tname
Oct 16 01:51:51 localhost lookupd[6053]: lookupd (version 324.13) starting - Thu Oct 16 01:51:51 2008
Oct 16 01:51:52 localhost set-hostname[6063]: setting hostname to doug-pennington-s-Computer.local
Oct 16 01:53:28 localhost pppd[6050]: Terminating on signal 15.
Oct 16 01:53:28 localhost configd[89]: posting notification com.apple.system.config.network_change
Oct 16 01:53:28 localhost mach_init[2]: Server 2233 in bootstrap d03 uid 0: "/usr/sbin/lookupd": exited as a result of signal
1 [pid 6053]
Oct 16 01:53:28 localhost configd[89]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/set-hos
tname
Oct 16 01:53:28 localhost pppd[6050]: Connection terminated.
Oct 16 01:53:28 localhost pppd[6050]: Connect time 1.7 minutes.
Oct 16 01:53:28 localhost pppd[6050]: Sent 6407 bytes, received 45234 bytes.
Oct 16 01:53:28 localhost lookupd[6067]: lookupd (version 324.13) starting - Thu Oct 16 01:53:28 2008
Oct 16 01:53:29 localhost set-hostname[6081]: setting hostname to doug-pennington-s-Computer.local
Oct 16 01:53:32 localhost pppd[6050]: Serial link disconnected.
Oct 16 01:53:33 localhost pppd[6050]: Exit.
#2 http://discussions.apple.com/thread.jspa?threadID=1691464&tstart=15 -
I'm encountering this error and not sure how to fix, I'm quite new to vCenter so please bear with me.
I'm trying out vCenter 5.1 with Update Manager 5.1 right now. No license key has been entered and I still have 50 odd days to try it out.
2 ESXi hosts are being managed by this vCenter, and they're both running ESXi 4.0
I'm looking to use Update Manager to try to upgrade the ESXi 4.0 hosts to ESXi 5.1
I downloaded the image file VMware-VIMSetup-all-5.1.0-799735.iso from VMWare website, and is looking to import it using the Update Manager so I can update the ESXi hosts, but I keep on getting the error:
File name: VMware-VIMSetup-all-5.1.0-799735.iso
Failed to transfer data
Error was: A web exception has occurred during file upload
I tried importing it by using vSphere client to connect to vCenter server both remotely and locally, with firewall disabled.
I've read http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1026602
I've disabled firewall, and there is no anti-virus program on the server. I've also restarted the machine several times, to no avail, I didn't reinstall update manager because the whole Windows and VCenter installations are clean from scratch.
I logged into the vSphere Client using Active Directory credentials, and I've made all Domain Admins (which my account is a member of) part of the administrator group on the vCenter server. I can't log in using admin@System-Domain because it tells me I don't have permissions for it, I still haven't really had the chance to figure out why that is and not sure if that makes a difference.
Also, I'm fairly certain I'm using the right image file, as I've burned some DVD's used that image file to upgrade some other ESXi hosts. Unless there's a special image file I need to download?
I'm at lost on what I can do to make it work. Please advise.
Thanks.The ISO file you mentioned is the one for vCenter Server. What you need is the "VMware-VMvisor-Installer-5.1.0-799733.x86_64.iso" (or VMware-VMvisor-Installer-201210001-838463.x86_64.iso) for the ESXi host.
André -
Symptom:
When you view a report with SCCM, you may encounter the following error message:
An error has occurred during report processing.
Under the details box, you can see the detailed error information as below:
System.Web.Services.Protocols.SoapException: The report server has encountered a configuration error. Logon failed for the unattended
execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. Logon failed for the unattended execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException:
Log on failed. Ensure the user name and password are correct. ---> System.ComponentModel.Win32Exception: The user name or password is incorrect
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Figure 1 is the screenshot of the error message in SCCM:
Figure 1.
Cause:
According to the detailed error message, it indicates that “The report server has encountered a configuration error. Logon failed for the unattended execution account.”
and “The user name or password is incorrect”, so this issue would be caused by the mismatched credential stored in report server.
Solution:
To solve this issue, you can follow the steps below:
1.
Access Report Manager URL on your reporting server.
From figure 2, you can see that the URL for Report Manager is
http://SCCM:80/Reports
in our lab environment. You can check your Report Manager URL in Reporting Services Configuration Manager.
Figure 2.
2.
Find out the date source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} and access it.
Figure 3.
3. Test connection (Figure 4)
You can have a test connection to check whether the credentials stored in the report server are correct or not.
Figure 4.
4.
Modify the password or choose another authentication method
If you want to change the password, please make sure that password is the same as the one that you have set for that user account in the domain.
5. Confirm connection
After you change the password, you can test connection again. From figure 5, we can see that connection created successfully.
Figure 5.
After all the steps above, there is no error message when viewing the report. (Figure 6)
Figure 6.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
on the reporting web the system role and check the all settings give him full permissions
do i make my self clear ? (my English is not so bright )
now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
this poor gay have the same problem
An error has occurred during report processing. (rsProcessingAborted) -
An error has occurred during SWF generation.
Hello
We are receiving the error message "An error has occurred during SWF generation. Please contact the file creator or your system administrator" while trying to publish a dashboard to the BO server. But we haven't been able to assure the client what's causing the problem.
Here is some background about the dashboard and the error:
- It does not contain any unsupported formulas.
- It contains about 3,000 rows distributed on different tabs.
The error appears to happen randomly. I have succesfully exported the swf file locally (on my computer) a couple of times. Using the preview button also works sometimes, but when we try tu publish we get the error. We also have other dashboards, and publishing them works fine with them.
I think this might be a resources issue, the computer from which we are trying to publish has 2GB in RAM, and although it doesn't seem to be consuming all memory when trying to publish, it looks pretty close to do so.
I've succesfully deployed the swf file on locally on an other computer that has 8GB in RAM, but it is not in domain, so I cannot publish from there, and due to company's policy we cannot copy the swf files directly to the server.
I'm looking for help on the error, or for an explanation on what does Xcelsius do when generating the swf, for the tests I've run I would say it is a resources problem but I don't have a way to support this.Hi,
You can try to reduce the size and complexity in excel.
Just export your excel to local machine, open and save it again reimport the same excel.
By doing so your excel file size will get reduced. (To see the difference record the size when exported from xcelsius and after saving xls).
One more suggestion is try to reduce the complex formulas. All i can say is replace the Vlookup formulas with Match and Index.
Reduce if more countif() or Sumif() are used.
Last but not least, try to increase flashs buffer size.
Hope this might help you.
If these things are not going to work......... Last option is to increase your machines RAM.
Regards,
AnjaniKumar C.A. -
error has occured during install before the requested operation for I tunes could be completed Your system has not been modified to complete the install run the installer again and I have it still won't work
See:
Trouble installing iTunes or QuickTime for Windows -
An error has occurred during report processing. (rsProcessingAborted)
Access Web Databases and SSRS
Issue:
After creating an access web database, such as Contacts Web Database in SharePoint 2010 we receive the following error when trying reports. This only happens on the Address Book, Phone Book, and Contact List reports. The Contact
Details and Printable Labels reports both work. The reports do not begin to error until data is added to the database (no errors initially).
I have duplicated this across all of our environments with the same results and get similar results when adding a Projects Web Database.
Environment:
Prod:
3 WFE Servers – SP 2010 sp1
3 App Servers – SP 2010 sp1
2 SQL Servers – 2012 sp1
QA:
3 WFE Servers – SP 2010 sp1
3 App Servers – SP 2010 sp1
2 SQL Servers – 2012 sp1
DEV:
1 WFE/App Server – SP 2010 sp1
1 SQL Server – 2012 sp1
Background
SSRS was installed following recommended guidelines and can be verified to be working. http://blog.helloitsliam.com/Lists/Posts/Post.aspx?ID=66
Error full text
Microsoft SQL Server Reporting Services
An error has occurred during report processing. (rsProcessingAborted)
The Group expression for the grouping ‘Group1’ contains an error: Request for the permission of type 'Microsoft.Office.Access.Server.Security.AccessServicesPermission,
Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' failed. (rsRuntimeErrorInExpression)Found the answer
here.
In short, SSRS 2012 installation missed a couple of config entries. You'll have to add them yourself:
Open C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\WebServices\Reporting\rsreportserver.config. Search for the <Data> tag and add this entry:
<Extension Name="ADS" Type="Microsoft.Office.Access.Reports.DataProcessing.AdsConnection, Microsoft.Office.Access.Server.DataServer, Version=14.0.0.0, Culture=Neutral, PublicKeyToken=71e9bce111e9429c" />
Open C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\WebServices\Reporting\rssrvpolicy.config.
Search for <NamedPermissionSets> and add this entry:
<PermissionSet
class="NamedPermissionSet"
version="1"
Name="ReportExpressionsDefaultPermissionSet">
<IPermission class="SecurityPermission" version="1" Flags="Execution" />
<IPermission class="Microsoft.Office.Access.Server.Security.AccessServicesPermission, Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" version="1.0" Flags="CalculationCallback" />
</PermissionSet>
In the <CodeGroup>node, around line 70, find and change PermissionSetName from “Execution” to “ReportExpressionsDefaultPermissionSet” -
Hi,
I'm having issues with the report created using SSAS cube.
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand)
The Operator_Performance cube either does not exist or has not been processed.
I have searched through internet and tried all the solutions, but didn't worked for me.
SSRS services running as NETEWORK SERVICE user.
SSRS Execution running as a Different user, which is the login is used to logon ot that server. I have also verified this user has access to database. I'm using Shared DataSource(SSAS Source) for this report.
Can any one please help me.
Thank You,
Praveen.
PraveenHello,
Have you tried it to execute on report manager , Is your data source properly configured in Report Manager and your report is mapped with Datset correctly?
Have you executed the Dataset query MDX editor now?
What is the volume of data you are fetching in the report. Try it to execute in other than IE , I don't know the exact reason but some of our report with large volume of data are failing on IE , on the other hand these reports are running fine Google
Chrome
blog:My Blog/
Hope this will help you !!!
Sanjeewan -
An error has occurred during the execution of the JSPM_MAIN phase.
Hi,
When I run the go.bat for running SLD, I am getting the following exception.
An error has occurred during the execution of the JSPM_MAIN phase.
Cannot initialize application data. Could not determine profile parameters. Error while retrieving value j2ee/dbhost,j2ee/dbname,j2ee/dbtype, with retriever com.sap.sdt.tools.sysinfo.ProfileDataRetriever. Could not extract value with key j2ee/dbhost,j2ee/dbname,j2ee/dbtype, from file D:/usr/sap/CE1/SYS/profile/DEFAULT.PFL. A possible reason could be that the path to the directory containing the sappfpar executable is not included in the PATH environment variable. Could not start process sappfpar. Error while executing process sappfpar. java.io.IOException: CreateProcess: sappfpar all pf=D:/usr/sap/CE1/SYS/profile/DEFAULT.PFL error=2
You can find more information in the log file D:\usr\sap\CE1\J01\j2ee\JSPM\log\log_2007_07_11_18_49_45\JSPM_MAIN_1_01.LOG.
Use the information provided to troubleshoot the problem. An SAP Note may provide a solution to this problem. Search for SAP Notes with the following key words:
com.sap.sdt.jspm.phases.PhaseTypeJSPM
com.sap.sdt.jspm.gui.JspmUiException
Cannot initialize application data.
JSPM_MAIN
JSPMPhases
NetWeaver Upgrade
SAPJup
Java Upgrade
Any inputs regarding this highly appreciated.
Thanks
SivaYou can look at the following link, it may help
https://www.sdn.sap.com/irj/sdn/directforumsearch?userid=3474257&rankby=10001&start=90 -
Hi,
Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.
In general it is no problem to generat SSRS reports, but an custom one i get issue with.
The Error:
An
error has occurred during report processing. (rsProcessingAborted)
Query
execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
ExecuteReader:
CommandText property has not been initializedHi SaiTech,
According to your description, when you render report on SCCM 2012 R2, you got the error message.
According to my knowledge, the issue can be caused by following reasons:
Select permission not granted to ConfigMgr reporting account. We need to open the SQL management console and open the properties dialog box of configmgr db, grant select and execute permission to ConfigMgr reporting account.
Reporting Services Web Service URL or Report Manager is false. Make sure Web Service URL and Report Manager URL are correct. Restart SMS_Executive service and reinstall Reporting Service Point, then please render the report again.
Report timeout. Increase query and report timeout.
If the problem remain unresolved, please provide detailed information of SRSRP.log (default location: %programfiles%\Microsoft and Configuration Manager\Logs) and reporting services error log(default location: %programfiles%\Microsoft SQL Server\<SQL
Server Instance>\Reporting Services\LogFiles), it will help us move more quickly toward a solution.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support -
Hi All,
I'm facing a strange problem..
I've developed few reports. they are working fine in develop environment. after successfull testing they were published on web.
in web version, all reports are executing for first time.. if I change any of parameters values or without chaning also..
if I press "View Report" following error occurs..
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for data set 'dsMLGDB2Odbc'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
please suggest any alternative ways to overcome this issue
thanks in adv.in my case the problem is
one virtual machine is for developers
other for testers
in developers i created a report, then save like *.rdl and copy to testers machine, does not work there
the error what testers get is
Error during the local report processing.
Could not find a web-based application at http://developersMachine/AnalyticsReports/DataBaseConnector.rsds
and the solution is to use alternative url or in some cases http://localhost/ -
click report error:
log file:
processing!ReportServer_0-2!104c!04/27/2015-19:15:21:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing.
---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for dataset 'dsPriority'.
---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Query (26, 25) The ALLMEMBERS function expects a hierarchy expression for the argument. A member expression was used.
at Microsoft.AnalysisServices.AdomdClient.AdomdDataReader..ctor(XmlReader xmlReader, CommandBehavior commandBehavior, AdomdConnection connection)
at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunDataSetQuery()
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunDataSetQuery()
at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.Process()
at Microsoft.ReportingServices.OnDemandProcessing.RuntimeParameterDataSet.Process()
at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.ProcessConcurrent(Object threadSet)
--- End of inner exception stack trace ---
open http://localhost:8080/tfs/TeamFoundation/Administration/v3.0/WarehouseControlService.asmx?op=ProcessWarehouse click Invoke:
System.Web.Services.Protocols.SoapException: TF221029: Reporting for Team Foundation Server does not have any warehouse jobs defined. Use the Team Foundation Administration Console to rebuild the reporting. : 2015-04-27T19:30:29:782 ---> System.InvalidOperationException:
TF221029: Reporting for Team Foundation Server does not have any warehouse jobs defined. Use the Team Foundation Administration Console to rebuild the reporting. at Microsoft.TeamFoundation.Warehouse.WarehouseAdmin.QueueJobs(String collectionName, String jobName)
at Microsoft.TeamFoundation.Warehouse.WarehouseControlWebService.ProcessWarehouse(String collectionName, String jobName) --- End of inner exception stack trace --- at Microsoft.TeamFoundation.Warehouse.WarehouseControlWebService.ProcessWarehouse(String collectionName,
String jobName)Hi shelman,
I'd like to know whether you configured TFS reporting service properly, and if you can get the report normally before. From the error message, you might has wrong data source or the parameters of the dataset 'dsPriority'. You can check whether the data source
for your report is available, try to use windows authentication. Or check the parameters of dataset 'dsPriority' make sure the query works when you execute it manually.
To process the TFS data warehouse and analysis services cube, I'd like to know which operation you selected before clicking Invoke button. Please follow the instructions on this
page to process TFS data warehouse and analysis service cube manually. You can also refer the James's last reply in this
thread or this
blog to check if the solutions work for you.
Another option is run TFS best practice analyzer to check if there any configure issues on your TFS server machine. And check event logs to see if there any useful information, elaborate more details about your scenario including reproduce steps if the problem
persists.
Best regards,
Maybe you are looking for
-
Returning to Safari opening pdf documents instead of a third party apps
Does someone know how to return to the original settings where safari opens the pdf documents, beacuse adbobe webviewer is blocking this feature, and I'd realy like the old days where safari opened them, also I can;t seem to uninstall the adobe plugi
-
I just updated Firefox to 6.0, and suddenly certain parts of the text which used to be in English now display in Devanagari, the font used in Hindi. How do I get it back to English?
-
How to play all exept one album
Hello there! Is it possible to play all music except one album without organizing or using a playlist? If yes can you teach me? Thanks
-
Iphoto was working fine until I downloaded and installed LION. Now I get a problem message to check that iphoto is compatible with this version of MAC OS X. I always download software updates.
-
How to Stop E-Mail Attachments
On a Blackberry 8120 can I stop attachments but still receive E-mails? I would rather pick attachments up at home, so I just need to read the E-mails on the Go. Thanks! Message Edited by Dezy on 04-16-2008 05:57 AM