A strange problem in text element

Hi,
I developing a smartforms in ECC 6.0.
In this i created a simple text element where i write:
Order numer &LS_VBAK-VBELN&
Then when i save or active the smartforms automatically in the text element the space between has being deleted as so:
Order numer&LS_VBAK-VBELN&
Why?
Thanks lot.
Matteo Vernile

Hi
If u r giving space in between Order numer AND &LS_VBAK-VBELN& then it should come
OTHERWISE
make a template and in that make two colum and
create 2 text element and
put the static data in one text and the dynamic data in another text.
let say
text1------ Order numer
text2----
&LS_VBAK-VBELN&
hope this will solve ur problem
Thanks
Krushna

Similar Messages

SmartForms - Problems with Text Element

Hello guys!
I was adjusting a SF for the BID_INVITATION scenario (SRM) when i stopped in front of a problem.
I included the word "Data" in a Text Element that there was already, but, my new word doesn't appear in the Form.
Anyone know what is happening?
Is there any thing especific in the Text Element to permit that my new word appear?
Thanks in advance.
Hugs.
Danilo Cardoso

Hi
Check If you activated the smartform and also check if there are any conditions in the condition tab of the text element.
Vishwa.

Smartform problem with text element

Hi,
In smartforms text element, we have this variable; &V_TEXT2(L)&.
My question is, what does the 'L' means there? what is it's purpose?
when we pass on numeric values into it, it's converted to something else. It does not show the correct output.
example:
v_text2 = 6245183
shown on the report is HEIS57YR18MO3 DY.
thanks!

Freishz,
Please refer below link.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf
page 72.
Regards,
Anmol Saxena.

Problem using text element with type TEXT INCLUDE in smartforms

Hi,
I am working on smartform.
My requirement is to print the text which can range from 1 to 99 (free text). I am using TDNAME, TDOBJECT and TDID from STXH table and putting it in the fields Text Name, Text Object and Text ID of text element created with type "TEXT INCLUDE" in window in smartform.
It works Fine only when I put exact value of TDNAME in Text Name field.
But in my case TDNAME can vary according to value of AENNR from Table AENR.
So I am trying to use a variable called W_TDNAME and pass TDNAME value to it. I am putting this W_TDNAME in the field TEXT NAME. And it says "Inlcude text W_TDNAME does not exist".
HELP ME OUT.
ANSWERS WILL BE AWARDED..
Tushar

Hi Tushar,
When you see in Text name field, there is a small button at the end of that field. This is to switch the dynamic field value option on. Click that and use the format &field_name& to enter your variable in that field.
Deepak Charanyan

Problem with text element

i get the data from text element i.e is from so10 i should display data in the footer window if the exceeds the footer window it should get display in the bottom of the next page how to split according to number of characters

Hi,
You can create secondary window and display after main window on both FIRST and SECOND page( and call pages expicitly if main window data does not cross FIRST page) with minimum height( 5 MM) and that way you can spread the SO10 text across pages.
BR
Dep

Very strange problem typing text in Keynote

I am having a really ridiculous problem typing text in Keynote. Everytime that I type the characters "fi" together, Keynote autocorrects and changes it to "fä".
This is incredibly inconvenient as you can imagine. And it does not happen in any other program.
Anyone, any idea?
JL

It sounds like the computer is trying to create the automatic "ligature" I believe it's called, but that font doesn't seem to want to allow Apple's auto-ligatures to display. Is it a "text" or "headline/decorative" font? You should be able to turn off auto-ligatures for that bit of text so that your original letters display separate as intended.

Strange problem with removing element from node

Hi,
I have a problem when I removed elements from a node.
here is the code:
String text = "123456";
IANode nodeA= wdContext.nodeA();
wdContext.nodeB().invalidate();
IBNode nodeB = wdContext.nodeB();
for(int i=0; i<nodeA.size(); i++)
IAElement e = nodeA.getEt_Emp_RespElementAt(i);
if (e.getID().compareTo(text)!= 0)
nodeB.removeElement(e);
else
wdComponentAPI.getMessageManager().reportSuccess(e.getID() + " was not removed");
The node A does have a row with field "ID" equals to 123456.
When running the application, it does write that "123456" was not removed...but it removes it....In fact my table is now empty.
How is it possible if it didn't perform the remove operation for ID = 123456 ?
Thanks in advance.

David,
Because you are iterating node in wrong direction: see my reply to your post Re: Loop problem (seems that you assigns me 2 points without reading reply, and mark it as solved just because you stop solving it
So, in example in this thread, you must iterate node B in reverse direction, get element from B and remove it from B if it has some specific ID.
Valery Silaev
EPAM Systems
http://www.NetWeaverTeam.com

Problem with text Element photoshop 9

Hello, When I type a text, nothing appears on the page or image. But I wrote the text on the layer. I read all the topic and saw several sitehelp, but nothing to make it still does not work.I use photoshop 9 native of my PC packard bel.
Thank you for your help.

Are you using a very large image. Sometimes the text is there but is hardly visible on a high resolution photo. Try increasing the font size. The dropdown menu shows a maximum size of 72 but you can type any value manually into the box. Try 100 or 150 and see if that works.

Problem in transporting the text elements for user exit EXIT_SAPLV09A_002

Hi All,
I am facing a problem in transporting the text element (text symbol) for the exit EXIT_SAPLV09A_002. It is implemented and transported but the text elements are not transported and even if I try to delete them and then create them again, on activation it doesn't prompts for TO and it version its shows it as local object. I have tried to manually assign the TO by using limu as id of program and rept as type and SAPLXV09 as the name of the object but still it doesn't allows as an error message comes prompting local object cannot be assigned to TO. Kindly suggest solution this problem.
Regards,
Sachin
Edited by: Sachin Dangayach on Nov 15, 2010 4:21 PM

Hello ,
In the Quality after you run the report check in the layout option>display text elements> variables and check what value is displayed for the use exit variable , if it is correct then problem may be in the selection you gave when you run the report if the user exit variable value is wrong , then set a break point in the code and run the report from rsrt and check where the error is.
hope it is clear
assign points if useful

Problem: Create SO with BAPI_SALESORDER_CREATEFROMDAT2 & Head-Text Elements

Hi all,
I hape that sb can help me with my problem.
I have created a ABAP-Program to create sales-orders with the function module:
BAPI_SALESORDER_CREATEFROMDAT2
Everythiunk works fine but I can not create text-elements (from the head) with this bapi.
I know that I have to use the table "ORDER_TEXT" but I do not know how to fill this table.
Can anybody help me?
Best regards,
pb974

Hi,
yes, you have to fill the order_text table. The following fields you have to fill:
DOC_NUMBER
-> not to fill, let it blank
ITM_NUMBER
-> if you want to create a header-text then fill ITM_NUMBER with '000000'
-> if you want to create a position-text then fill the related position-number '000010' or '000020'....
TEXT_ID
-> fill this field with the text-id for which you want to create the text.
-> The text-id must be defined in your customizing
LANGU
-> set the language for the text: 'E' or 'D' or......
LANGU_ISO
-> let it blank
FORMAT_COL
-> set a star (*) if you want to have the standard-format. If you have a special format defined in SapScript or in a Style you can set this one.
TEXT_LINE
-> fill in the text
FUNCTION
-> let it blank
see below:
data: i_text     LIKE bapisdtext OCCURS 0 WITH HEADER LINE.
Texte...
        CLEAR i_text.
        i_text-itm_number = '000010'.    "Text for Position 10
        i_text-text_id         = 'ZA10'.        "Defined Text-ID
        i_text-langu           = 'D'.             "Language German
        i_text-format_col    = '*'.              "Standardformat
        i_text-text_line       = 'This is text for Pos. 10 - line 2'.   "the text
        APPEND i_text.
...if your text has more then one row... the same one to do...
        i_text-itm_number = '000010'.    "Text for Position 10
        i_text-text_id         = 'ZA10'.        "Defined Text-ID
        i_text-langu           = 'D'.             "Language German
        i_text-format_col    = '*'.              "Standardformat
        i_text-text_line       = 'This is text for Pos. 10 - line 2'.   "the text
        APPEND i_text.
...and so one...
and now text for position 20...
        CLEAR i_text.
        i_text-itm_number = '000020'.    "Text for Position 20
        i_text-text_id         = 'ZA10'.        "Defined Text-ID
        i_text-langu           = 'D'.             "Language German
        i_text-format_col    = '*'.              "Standardformat
        i_text-text_line       = 'Text für Pos. 20 - Zeile 1'.   "the text
        APPEND i_text.
...and now the text for position in englisch
        i_text-itm_number = '000020'.    "Text for Position 20
        i_text-text_id         = 'ZA10'.        "Defined Text-ID
        i_text-langu           = 'E'.             "Language German
        i_text-format_col    = '*'.              "Standardformat
        i_text-text_line       = 'This is text for Pos. 20 - line 1'.   "the text
        APPEND i_text.
I hope it's a help for you.
Erhard

I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11: the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, howev

I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11: the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, however the arrows will move it OK. Also I cannot drag the selection to another photo in the photo bin as before.

Hi,
Please refer: http://helpx.adobe.com/photoshop-elements/kb/pse-stops-responding-yosemite.html
Thanks,
Anwesha

Problem: Text elements inconsistencies

Hi,
I Converted SAP standard query to ABAP program for my requirement. I done the programming. Now the problem is I have to Add some text elements. When i'm trying to add text elemments, some inconsistencies there in standard sap text elements. when i activate,it doesn't allow to activate.It is displaying the message as " Inconsistencies exist,plz correct". it is showing some inconsistencies in text elements. If i remove these textelements, my report header,some texts,so many are missing.So i have to add my textelements without removing standard text elemnts.Can anyone suggest.
Thanks
Arjun

Hi Deepak,
It contains more than 100 text elements. and also the program was developed using query strings.So text elements also developed in that way with % and | . So we cannot create new text elements.So just we have an option to add our text elements to Standard one. Just I'm creating the one block and three checkboxes. for these i have to provide long text more than 8 characters.Is there any other way.Please suggest.

Problem in line items(text elements printing) in smartform

Hi all
Here iam printing line item data in invoice form
around 7 fields(text elements) iam having the fileds are displaying one by one
I need to diplay all 7 fields one after another with some gaps in the same line
can u please let me know how to do it with text elements
thank you

Hi,
create a table. In once line type(Line type 1) create 7 different cells (Columns) for a single row.
For eg:
Line typ1 : cell1 cell2 cell3 cell4 cell5 cell6 cell 7.
cell1 : &mara-matnr&
cell2 : &mara-ersda&.
like soon in 7 different cells.
Br,
Laxmi.

Sapscript text Element Problem

Hi i have this following form AP checks which is not printing one of the line which it used to. I made some changes on other windows but for some reason it stopped print the text line it used to.
Here is the part of the code in the main window that's not printing...
/E 513
/* ------------------ Payment on behalf of --------------------------------
AS Payment is made on behalf of &REGUD-ABSTX&,
&REGUD-ABSOR&.
/E 514
/* ------------------ Signature -------------------------------------------
/: INCLUDE &REGUD-TXTUN& OBJECT TEXT ID ADRS
I need to print the line where it says "Payment is made on...."
Can any one tell me what are those /E 513 is?
They have all these numbers infront of a small paragraph.
I am guessing some program is calling the paragraphs by those numbers as the paragraph in the program doesn't appear they way it appears in the printout.
Please help.

TEXT ELEMENTS WITH NAMES
You recognize named text elements by the paragraph format /E. Such a paragraph may look like this:
The character string NAME represents the name of the text element. This name can be up to 30 characters long and may consist of letters, digits and/or special characters. The name is followed by the text lines of this text element. The end of a text element definition is marked by the beginning of the next text element (the next /E line).
Note that names of text elements are valid only locally. That is, different windows may contain text elements with the same names.
To output named text elements, you must use the interface function module WRITE_FORM, which is called in the print program.
The example below shows text elements for a column heading within an invoice (AS indicates the standard paragraph format and , , indicates the tab):
You can output named text elements only in the windows, in which they are defined. For this reason, you need in the interface function module WRITE_FORM, apart from the name of the text element, the name of the window in which the text element is defined. You call the interface function module from within the print program.
http://abapprogramming.blogspot.com/2007/10/sap-script-2.html
Regards,
Amit

Short code causes a strange problem - About the list again -- please read!

Hi again people. Maybe you remember my project - has a list, that you can search thru using a text field. During the work I got stuck on a strange problem ( Again :-( ) My app has one text field, one combo box, one list and a text field once more. The code should do the following ->
*1. Load the list, no problem with that.*
*2. Show the elements of the list, that match the selected group in the combo box,no problem.*
*3. Search thru the list using the text field,no problem.*
4. When the user selects an element from the list, it should display its info in the second text field. This also works fine, but when after looking at info of one of the elements the things on numbers 2 and 3 ( look up! ) stop working. I must say that everything works fine until user selects an element from the list. I couldnt understand this kind of behavior so I am asking you to help me please.
The code is very simple:
import javax.swing.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
class the_window extends JFrame implements DocumentListener, ItemListener, ListSelectionListener {
    FileReader reader;
    String data_base[][];
    String first_pass[];
    int number_of_elements;
    DefaultListModel dflm = new DefaultListModel();
    JList list;
    JTextField text_field = new JTextField();
    JTextField info_field = new JTextField();
    String groups[] = {"1. group" , "2. group"};
    JComboBox groups_cmbx = new JComboBox(groups);
    the_window(){
        super("the Window!");
        JPanel panel = new JPanel(null);
        Container c = this.getContentPane();
        c.add(panel);
        text_field.setBounds(10,10,170,25);
        text_field.getDocument().addDocumentListener(this);
        panel.add(text_field);
        groups_cmbx.setBounds(10,45,170,25);
        groups_cmbx.addItemListener(this);
        panel.add(groups_cmbx);
        list = new JList(dflm);
        list.setBounds(10,90,170,190);
        list.setFixedCellHeight(20);
        list.addListSelectionListener(this);
        panel.add(list);
        info_field.setBounds(10,280,170,25);
        panel.add(info_field);
        load_the_base();
        refresh();
        this.setSize(190,350);
        this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        this.setResizable(false);
        this.setVisible(true);
    public void itemStateChanged(ItemEvent e){
        refresh();
    public void valueChanged(ListSelectionEvent e){
        String str = (String) dflm.getElementAt(list.getSelectedIndex());
        int index = 0;
        for(int i = 0; i < number_of_elements; i++){
            if(str.equals(data_base[0])){
index = i;
break;
info_field.setText(data_base[index][1]);
private void load_the_base(){
String data = "";
try{
reader = new FileReader("data.txt";);
int r = 0;
while((r = reader.read()) != -1){
char c = (char) r;
data += c;
reader.close();
}catch(IOException e){}
first_pass = data.split(";");
number_of_elements = first_pass.length;
data_base = new String[number_of_elements][];
for(int i = 0; i<number_of_elements; i++){
data_base[i] = first_pass[i].split("#");
private void refresh(){
String search_str = text_field.getText();
int selektovano = groups_cmbx.getSelectedIndex();
dflm.clear();
for(int i = 0; i < number_of_elements; i++){
int grupa = Integer.parseInt(data_base[i][2]);
if(grupa == selektovano){
String at_the_moment = data_base[i][0]; // if you change this to String at_the_moment = data_base[i][1]; it works perfectly
if(at_the_moment.startsWith(search_str)){
dflm.addElement(at_the_moment);
public void changedUpdate(DocumentEvent e){
refresh();
public void removeUpdate(DocumentEvent e){
refresh();
public void insertUpdate(DocumentEvent e){
refresh();
public class Main {
public static void main(String[] args) {
JFrame f = new the_window();
Now, can you please tell me whats wrong with this?
For the "data.txt" make a new text file using *notepad* and copy the following line into the document:
_1. element#1. info#0;2. element#2. info#0;3. element#3. info#1;4. element#4. info#1;5. element#5. info#1;_

Darryl.Burke wrote:
Keith, thanks for making that readable. So here's the diagnosis -
In the refresh() method, calling defaultListModel.clear() results in a valueChanged(...) event in which this method calldefaultListModel.getElementAt(list.getSelectedIndex())results in the exception noted, as getSelectedIndex returns -1, the list being empty... you can't getElementAt(-1).
I haven't analyzed all the code nor checked whether is now works as desired, but this small change to valueChanged counters the exception being thrown.   public void valueChanged(ListSelectionEvent e) {
infoField.setText(""); // do this unconditionally
if (list.getSelectedIndex() != -1) {
String value = (String)defaultListModel.getElementAt(list.getSelectedIndex());
for(int i = 0; i < numFields; i++){
if(value.equals(matrix[0])){
infoField.setText(matrix[i][1]);
break;
db
Yea! You were right! I didnt think that calling *list_model.clear();* will result in calling *valueChanged()* ........
That was some *clear()* thinking :-) Thank you!
corlettk wrote:
I cleaned up some variable & method names (tut tut), imports (very naighty), and some thread stuff... but it remains fundamentally the same codeIs it so important to "clean" the imports? How much does it slow down the loading time? Should I do this on all my projects, because they are all "very naighty"?
ps. Thanks to all that gave some help to answering this strange question :-)

A strange problem in text element

Similar Messages

Maybe you are looking for