A strange problem with my wireless card

my box is lenovo ideapad y550, the wireless card is intel 5100. After i update to kernel 2.6.32, there is a strange problem occored.
i configure my wireless at /etc/rc.conf like this:
MODULES=(...... iwlagn ......)
wlan_wlan0="wlan0 essid xxxx key s:xxxxxxxxxxxxx
wlan0="dhcp"
INTERFACES=(wlan0)
DAEMONS=(......network......)
it works well at 2.6.31
but at 2.6.32, i find during the archlinux start, it tell me that "dhcpcd time out"
so i remove network from DAEMONS  and just load the wireless card's driver module, then i configure my wireless at the bash.
meanwhile, i find another strange appearance
when i use:
   ifconfig wlan0 up
   iwconfig wlan0 essid xxxx key s:xxxxxxxxxxxxx
   dhcpcd wlan0
it tell me "dhcpcd time out"
and then dhcpcd wlan0 again ,it works.
while i use:
   iwconfig wlan0 essid xxxx key s:xxxxxxxxxxxxx
   ifconfig wlan0 up
   dhcpcd wlan0
it works well.
i just put iwconfig before ifconfig, it works~ 囧!
now i have to remove network from DAEMONS at /etc/rc.conf and put the commands in the /etc/rc.local
anyone have ideas?why?
thanx very much and sorry for my english. english is not my mother language. :-)

Notes on trying out netcfg:
- install netcfg: pacman -S netcfg
- set up a profile file in /etc/networks.d (copy a file from /etc/networks.d/examples and edit it)
- add the name of the profile file to NETWORKS=() in /etc/rc.conf
- add '@net-profiles' to DAEMONS=() in /etc/rc.conf (put it after 'network',  prefixed with '@' so you don't have to wait for the network just to log in)
- remove the name of your interface that you want netcfg to set up from INTERFACES=() in /etc/rc.conf (so it doesn't try to set it up twice)
- also turn off whatever other network configuration daemon, like wicd, you might have been using.
Last edited by sdolim (2010-02-06 21:52:25)

Similar Messages

  • Strange problems with nvidia video card

    Hi, I don't know if it's really a problem, but I suppose...
    I had in the last days serious problems with the nvidia card and ubuntu (see ubuntuforums or askubuntu).
    Resuming I couldn't boot ubuntu if the nvidia card was enabled...
    Now I only use windows because of this problem but I have another doubt: why the power manager sometimes don't show me the GPU usage (see image)?
    In any case the nvidia (I think) is always working (the external monitor plugged in  the DisplayPort works... I think that's a confirmation)
    Another question: at times when I watch video on youtube the nvidia is enabled at others not... is this a problem of optimus or not?
    For me it's important that windows works (no problem if ubuntu doesn't works.. I posted the links of the problems with ubuntu just  for information on what's happened before this problem with windows..

    I'm using Firefox with html 5...
    But I also tried also with chrome, in which the html 5 mode in youtube is not activate, and I have the same problem...
    I find it strange because if i have the monitor plugged in the nvidia GPU is activated (of course) and if i'm whatching a video on youtube when i disconnect the monitor the GPU won't switch to the intel but it still remains the nvidia activated until i close this video..

  • Problems with Broadcom wireless card after Kernel Upgrade

    After upgrading to version 2.6.39 of the linux kernel, I am having trouble with my Broadcom BCM4312 wireless card. The broadcom-wl driver no longer seems to work, even after reinstalling it from the AUR. The b43 driver seems to be able to connect to unencrypted networks, but can no longer connect to my family's WPA Personal encrypted router. Is anybody else having a similar problem?

    As I understand it my laptop has been fine and it uses broadcom-wl, and I just re-yaourt it each time my kernel version changes using a cable in my router. But I believe there is something called dkms and a version of the driver for it, which (I haven't read fully into it) is something like a separate tree, which can (from what little I've read) eliminate this need to recompile every time, however I literally read this 5 minutes ago, from the AUR page for broadcom-wl and a quick google so I wouldn't be surprised if there is more to it than that.

  • Satellite A300 and Win7 - Strange problem with speakers\sound card

    Hello everyone,
    I am working on a - A300-1MO with win 7 ultimate 32 bit
    In the last few days (since I have installed the Bluetooth driver but I dont think it matters), the sound card, and therefore the laptop speakers, switch from being mute to being active, sometimes in high volume.
    It disturbs me a lot because my computer is making sounds while I am in classes (from apps running\web sites etc.). I almost got kicked out of class several times because of it.
    I tried muting the sound card from the windows mixer and from the sound card application, it's no use.
    I will appreciate any help.
    Thanks a bunch
    Roi.

    Hi roibs,
    > It disturbs me a lot because my computer is making sounds while I am in classes (from apps running\web sites etc.). I almost got kicked out of class several times because of it.
    Maybe you should leave your computer at home and not play with it in your class ;)
    Anyway, I would recommend disabling all Windows sounds in control panel. That means no sounds will be played while you navigate through the Internet or use the Explorer.
    Check this!!!

  • Strange problem with 2 different Soundblaster car

    I have a very strange problem with these 2 cards First i had soundblaster li've value which was installed with the default windows drivers. Although it'swas installed correctly in device manager, i hear no sound and when i go to control panel->sounds and audio devices, under the volume tab there?was no audio device and everything?was greyed. But when i restart or shutdown the pc the windows sound suitable for this action played without problems. Media player couldn't play any sound, neither youtube. I downloaded and installed the Li'veDrvUni-Pack(ENG). Everything worked ok but after a while i had the same problem. So i decided to buy a different sound card, the Li've Audigy SE. Installed, worked fine, but after a short period of time i have the same problem. Most of the times when i boot into Windows the sound is ok, after a while (5 minutes or hour) i hear no sound and in the control panel i see the no audio device message although in control panel the card appears to be installed correctly. Any ideas?

    Yes, I agree.
    But my question: is there any software trick that I could use to fix the situation.
    For example, how can I ask 2 keyboards about each one's NumLock state ?
    I know about getLockingKeyState() function, but it always returns the NumState of the regular keyboard. How can I know and/or change the NumLock state of the small one ?
    Thanks

  • Strange Problems With Display and Permissions Since 10.5.1 update.

    Since I've done the 10.5.1 update I have been having a strange problem with my desktop and dock displays. On my desktop I have these strange lines that appear any time I log in or open any application, the lines never go away and change locations on the screen once I open an application or move a window. My dock has the reflective shelf for about half of it, the rest is a dull grey. I've also had problems with verifying and repairing my permissions. I can never actually complete either permissions task. I've used some third party apps, they always fail as well. The only time I can actually repair my permissions is by booting in to single user mode and doing a fsck -f command. When I boot back in to Leopard and try to use the Disk Utility to repair, it continues to fail.
    I'm not sure if the video problem I am having stems from a permissions issue or possibly a corrupt video driver. Either way, I've done a lot research and haven't found anyone with the same problems I have been having so I thought I would give these forums a shot.
    I am using a PowerMac G4 Quicksilver with dual 800Mhz, 1.5gb RAM, and a GeForce4 Ti 4600 128mb video card.
    Here is a screen shot of the line and dock problem.
    Here is a screen shot of my "About This Mac.
    If anyone could lend some light on this issue, I would greatly appreciate it.
    Thanks
    Jeff

    you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
    btw - no solution yet.

  • Window 8 WiFi problem with Cisco wireless network

    Anyone encounter a Windows 8 WiFi authentication problem with Cisco wireless network?
    We are using WLC 5508, 7.2.111, and AP 3602i with WPA2.
    Sent from Cisco Technical Support iPad App

    This problem occurred with Soney, and Dell models.  Lenovo with Windows 8 factory installed is working fine.
    Won't make any difference as these laptop's wireless NIC cards are different.
    Can you try with OPEN authentication.  If the Sony and/or Dell laptop works, then you start cranking up the security and/or encryption settings until you break them.
    I'm with Scott here:  It's got to be a wireless NIC card driver.
    As what George has stated, post the debug of the failed attempts.

  • Problems with Verizon Wireless BlackBerry Tour BlackBerry OS 4.7.1.61 update:

    Problems with Verizon Wireless BlackBerry Tour BlackBerry OS 4.7.1.61 update - I was anxious to download the update to see if it addressed the sticky trackball problems and the low volume issue when using a blue tooth device. However, in the process of updating my BB Tour yesterday, the install stopped on the 8th out 12 updates. After a couple of 'retrys', the BB error message on the desktop came up which instructed me to: i) disconnect the device, ii) restart the computer. iii) restart the loading process and, iV) restore my data by loading the loader back-up file using Restore. Unfortunately my Tour was left without any software and the Desktop manager couldn't recognize it. The error message on the Tour was 503. Called Verizon Wireless tech and bottom line, the only fix is a new Tour, which they're sending me. Anyone else having issues with the update? Also, does it address the trackball and blue tooth issues?

    I had issues with the trackball and had to have my Tour replaced.  I was told this model does not have a removable trackball so the entire phone has to be replaced.  My current one is working OK but does stick a bit.  Seems to get worse over time.  My wife's tour is newer and so far she is not experiencing the problem.  Have not experienced a problem with the Blue Tooth volume.
    I have another issue with this upgrade that I am wondering if anyone else has seen.  My wife has the Tour as well.  She was prompted to do the upgrade and went through it.  It appeared to work except it blew out her Contact Alerts.  When we put them back in we can no longer get the sound to play when she receives an SMS message in her holster. Vibration works but doesn't do any good when it is in her purse.  Phones calls, calendar alerts, alarms all work in holster.  As soon as we delete the contact alert the default SMS alert will play in the holster.  If she takes her phone out of the holster the Contact alert will play.  My phone is still running 4.7.1.40 and this function works fine.  I am thinking about trying to put her's back to my version if possible but not sure the best way to go about this 

  • Strange problem with Adobe Acrobat X (crash without a trace)

    Hi,
    I have a strange problem with Adobe Acrobat. It happens totally randomly, it leaves no signs in system logs.
    What is happening: during my work Adobe Acrobat sudennly crashes. After a crash I cannot run it again - system seems to do something for a second, but then nothing happends. When i look into taks manager - there are no processes of Acrobat.exe. It just doesn't want to run. What I need to do is to reinstall whole Adobe Acrobat - which requires restart.
    I've already tried to restart system after crash, it doesn't help - reinstall is required.
    Sometimes everyting is fine for a 3 months, sometimes crash happens a week after the previous one. It also happens in very different situations (somtimes  while opening a file, sometimes when doing something simple, sometimes in more complex tasks).
    Has anyone encountered a similar problem?
    Acrobat version: 10.1.1
    System info: Windows 7 64 bit

    Hi Kelvin,
    Please let me know what OS version you are using.
    The error also shows OS requirements not met.
    Futher please try the steps below :
    > Enable the hidden Admin Account on Windows 7 ( Ref :  http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
    > Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
    > Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
    Reboot and try installing in the new enabled Admin user account and check.
    Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
    Also see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
    Regards,
    Rave

  • Strange problem with Subviews on 1.0 Beta

    Hi,
    I'm having a strange problem with SubViews on 1.0 Beta. I'm not sure If I'm being stupid and have done something wrong, or if there's a problem here.
    My application is directly based on one of the examples, so the structure etc is almost identical. I've simplified the files below to avoid confusing the issue.
    The default landing page (greeting.jsp) looks like this:
    <%@ taglib declarations for HTML and CORE taglibs %>
    <HTML>
    <HEAD><title>Insulation Layer Demo</title></HEAD>
    <body bgcolor="white">
    <f:view>
    <jsp:include page="sysstatus.jsp" />
    <!-- other strictly HTML content -->
    </f:view>
    </body>
    </HTML>
    sysstatus.jsp looks like this:
    <%@ taglib declarations for HTML and CORE taglibs %>
    <f:subview id="SystemStatusView">
    <h:form id="systemStatusForm">
    <p><h:selectboolean_checkbox id="System1Available" value="#{SystemStatus.system1Available}"/>System 1<br/>
    <h:selectboolean_checkbox id="System2Available" value="#{SystemStatus.system2Available}"/>System 2</p>
    <p><h:command_button id="submit" action="success" value="submit" /></p>
    </h:form>
    </f:subview>When I view this page, the checkboxes all seem to work okay (in that their state is preserved across calls etc), but the formatting is very screwy. The resulting page looks something like:
    <chkbox1> <chkbox2> <Submit>
    System 1
    System 2
    <Other HTML content from greeting.jsp>When I look at the HTML source code being generated, it is genuinly being generated as above, that is, all the form tags first, and then the rest of the content. Interestinly, I tried adding a ${SystemStatus.system2Available} into the body text, and it was rendered as literal text (i.e. not evaluated as EL), which is very curious -- makes me wonder if the included file is included as text, rather than JSP, although the custom taglibs and <f:form> tags etc are not in the generated HTML.
    If I lift all the content between the <h:form> tags (inclusive) out of sysstatus.jsp and put it in greeting.jsp in place of the <jsp:include> tag, all is well.
    Any ideas? All help gratefully recieved!
    Thanks,
    Paul

    Personally, I think it is a bug in the rendering model of JSF itself because if you include any non-JSF tags, they don't get rendered according to my understanding of the what the spec says (in the location the tags are written).
    The only workaround that I could come up with is to use straight JSF tags in all of your layers. Things are then rendered the way that they "should" be rendered.
    You could try wrapping all of your HTML tags in <f:verbatim> tags and see if that helps.
    Good luck!
    David

  • "There is a problem with the SIM card in your iPhone"

    I'm getting this error when I try to activate my new iPhone 4 through iTunes:
    "*There is a problem with the SIM card in your iPhone.*
    To activate your iPhone with this account, you will need a new, unactivated SIM card. Please use the SIM card that was provided with your new iPhone. If you are using the new SIM card, and are unable to complete activation, you can go to an Apple Retail Store or an AT&T company owned retail store to request an unactivated SIM. If you would prefer to have a replacement SIM card sent to you via overnight mail, please call us at 1-800-MY-APPLE. We apologize for the inconvenience this has caused."
    Now I've already been to AT&T and nothing they could do with the account settings would work, in fact they had never seen the issue before. They gave me a new SIM card and that did nothing as well. Finally they tried out a different SIM tray, and that still didn't work. I have a Genius Bar appointment at the Apple Store tomorrow, but I was wondering if anyone else has this problem. Do you think that the SIM reader inside the iPhone 4 is broken?

    I solved a problem I had with activating my iPhone although the error message was different from yours.
    I got the message "There is something wrong with your iPhone and it cannot be activated, please bring it to your nearest Apple service".
    Via a Chinese forum I found out its the SIM card witch is the problem. If the serial number of the SIM has a "letter" in it it won't work. If only numbers it will work.
    I now tried it with 2 SIM cards with letters and got the message over and over again. Than tried with my only numbers SIM card and it activated instantly.

  • Strange problem with the mail app on an iPad

    I've got a bit of a strange problem with the mail app on an iPad - it's sending and receiving mail ok but won't let you delete mail. If you keep at it, it appears as if you have deleted mail (though takes a very long time as you just have to keep deleting it over and over again) -  but the size of the app still keeps going up - reached 600mb so far, even though there is hardly any mail or attachments (goes up quite a lot each time you try to delete anything) - any idea what's causing this and how I can fix it?
    It occasionally comes up with a dialogue panel saying to check my account settings, but I have checked those and they are fine. The little 'loading' icon just keeps spinning constantly too.

    go to Settings > Mail > your account > Advanced > Move Discarded Messages Into 
    and make sure that Deleted Mailbox is ticked, and not Archive Mailbox
    You can also adjust how long the deleted mail stays in the trash immediately below that.
    If you are talking about a gmail account, you may also have to login to your account on the gmail server and update the settings there.  This is what Barney previously posted about that:

  • Strange problem with ACLs

    Hi,
    I have just migrated an oracle database from 11.1.0.7 on Win Server 2003 to 11.2 on Linux 64 bit. I am having a strange problem with ACLs - I can create the ACL but when I perform either of the following two commands:
    SELECT * FROM DBA_NETWORK_ACLS
    or
    SELECT * FROM NET$_ACL
    I get no rows returned. The ACL exists somehow because if I try and create it again I get the error that it exists. Has anyone got any advice here? Something is out of sync and I need to know how to fix it up.
    Thanks
    Adam

    BEGIN
    DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
    acl => 'email_server_acl.xml',
    description => 'Network connection Email Server',
    principal => 'MAIL',
    is_grant => TRUE,
    privilege => 'connect');
    END;
    PL/SQL procedure successfully completed.
    select * from DBA_NETWORK_ACLS;
    (no rows)
    BEGIN
    DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
    acl => 'email_server_acl.xml',
    description => 'Network connection Email Server',
    principal => 'MAIL',
    is_grant => TRUE,
    privilege => 'connect');
    END;
    ORA-31003: Parent /sys/acls/ already contains child entry email_server_acl.xml
    ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 252
    ORA-06512: at line 2
    Edited by: Adam J. Sawyer on 15/04/2011 17:08

  • HT1918 i have a problem with my prepaid card

    i have a problem with my prepaid card i put all the correct payment informations and have a message
    your payment method declined please enter valid payment information
    <Personal Information Edited by Host>

    We are fellow users here on these user-to-user public forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove the card details from your post, but if you read this post within 15 minutes of your original posting time then you should be able to edit your post yourself. But as people subscribe to these forums you may find that your card gets emptied.

  • Some strange problem with Flash/As3

    Hi,
    I am having some strange problem with my flash cs3.
    Whatever script I write in as3  doesn't work, even a stop() function doesn't work . But when I change my publish setting to as2 it works fine.
    Not sure about the root cause, may be some setting or preference or my cs3 is corrupted.
    Can anybody please advise.
    Thanks,
    Kishor

    try this
    create a new fla as3,
    select frame 1
    open the actions panel
    paste in the following code
    var squares:Array = new Array;
    setup();
    function setup():void {
        for (var i = 0; i < 25; i++) {
            var square:Sprite = new Sprite();
            //square.name = "square" + i;
            square.graphics.beginFill(Math.random() * 0xffffff);
            squares.push(square);
            squares[i].graphics.drawRect(0, 0, 100, 100);
            squares[i].x = i*3;
            squares[i].y = i*3;
            squares[i].filters = [];
            square.graphics.endFill();
            stage.addChild(squares[i]);
    for (var j = 0; j < squares.length; j++) {
        squares[j].addEventListener(MouseEvent.MOUSE_DOWN, dragMovie);
        squares[j].addEventListener(MouseEvent.MOUSE_UP, dropMovie);
        squares[j].buttonMode = true;
    function dragMovie(event:MouseEvent):void {
        event.target.startDrag();
    function dropMovie(event:MouseEvent):void {
        event.target.stopDrag();

Maybe you are looking for

  • Assign of Service order to Service Notification using BAPI_ALM_NOTIF_CREATE

    Dear Guru's, I am using BAPI_ALM_NOTIF_CREATE for creation of Notification. Then BAPI_SERVNOT_SAVE & At last BAPI_TRANSACTION_COMMIT. Notification    is getting created . But I want to assign the service order to this notification. ( IW52 ). I have t

  • Schedule and windows 2003 "net use"

    ver 10.2.0.2 lastest patch 9 windows 2003 trying to get the scheduler to work with a batch file that uses NET USE etc.. for ex net use q: \\workstation\sharename mypass /user:domain_admin I have tried to put this in a BATCH file begin dbms_scheduler.

  • Password Synchronization Connector Error in SSL secure mode (636)

    Hello friends, I tell them my case: I have an Oracle Identity Manager environment BP15 9.1.0.2 and I installed an Active Directory Password Synchronization plug. The connector works properly in unsafe mode (389), then you have configured the SSL conn

  • How to pass header to a jsp when doing response.sendRedirect

    Hi, It is possible to pass header to a jsp when doing response.sendRedirect ? how to do it? thanks

  • CS5 crashing on new image/opening image

    Okay, so here's the deal: I've owned my MacBook Pro for less than 12 hours, and it's been a great computer that entire time. That's the same amount of time I've had CS5 Extended installed on my computer, and it was working fine until this evening. No