A suggestion about input chinese

Congratulation first! I recived your procduct download by oracle RSS, and download it in first time. I install and play, it's real a good work.
But when i press Crtl + space call chinese input method, the completion insight jump out :)
So if i hope this default accelerators can change to other, otherwise i must replace it in every in installtion.
Message was edited by:
[email protected]

Any chance you could post a screen shot so I can see the same thing you are?
-kris

Similar Messages

Jabber Client chat box input Chinese

Hi all,
     I'm facing a problem with my Jabber client for Windows 8.1, the problem is that I can not input chinese in my chat box, but can use in other field like search or change Nick name.
     I have try to reinstall the Jabber client, or upgrade the Jabber Client from 9.2 to 9.6, but the problem still not fixed, and I test this two version on Windows 7, there's no problem like on Windows 8.1.
     BTW, I can copy the Chinese code from Notepad or other place, it can shown in chat box and can send it successfully.
     Is there anybody know why and how to resolve it?
1. When I type somting in search field, it can show the chinese.
2.In chat box, I try to input something but there is noting display

Hi all,
     Anybody know about this problem?

How to read and input Chinese through Blackberry wireless cell phone

The way to read and input Chinese through Blackberry wireless cell phone
My phone model is Blackberry 8520.
My Blackberry can read and input Chinese after these steps.
1. Go to the weblink http://na.blackberry.com/eng/support/downloads/download_sites.jsp
2. Click "China Mobile Peoples Telephone" included in "Asia Pacific".
3.Select a product from the drop down menu, for example, mine is BlackBerry 8520, and I select it.
4.Click "next"
5.Then select the "Download Software" on thebottom of the same webpage.
6.Fill in all the information required on the following page, then "Next"
7. Start download the software to you PC, computer or laptop.
8.Install this downloaded software to your PC. The software is called "8520wifijEastAsia_PBr4.6.1_rel424_PL4.2.0.122_A4.6.1.286_China_Mobile_Hong_Kong_Co._Ltd"
9.Link your wireless cell phone to your PC
10.Then go to C:\Program Files\Common Files\Research In Motion\AppLoader
11. Double click "Loader"
12. Select all the languages you want to update to your cell, and then follow the information to the left steps.
It will take about 20 minutes after Step 12 to finish the upload to the cell.
Done.
Now I am happy I can read and input both English and Chinese through my BlackBerry.
If you have any questions, please leave message to me on this web.
Good luck.
Grace

Hi Grace,
I'd faced the same issue as KU.
After all the installation.. it does not have any options for me to choose for the language.. can kindly assist me on this???
it only showed those applications that i had in my mobile...
Thanks
-fei-

HT201301 how about the Chinese language doc. Able to use with the My Lyric Book program?

how about the Chinese language doc. Able to use with the My Lyric Book program?

I'm not sure where you see that the links I gave suggested that. The iPhoto link (quoted below) in step 4 suggests dragging the library to the new location. You can do that in Finder by dragging the library to the external disk in the Finder sidebar. If you don't have a sidebar in Finder, go to the Finder View menu and click Show Sidebar. If the external disk isn't visible in the sidebar, go to the Finder Preferences, click Sidebar at the top of the Preferences window, and put a checkmark in front of External disks in the Devices section.
You can move your entire iPhoto library to a different computer, a hard disk, or another location on your computer.
Important: Before you move your iPhoto library, it’s a good idea to back it up to a DVD or external hard disk.
Move your iPhoto library
If you’ve created multiple photo libraries, be sure to move only the library currently displayed when iPhoto is open. To move a different library, you first need to switch to it.
Quit iPhoto.
In the Finder, choose your home folder (it’s usually named after you).
Open the Pictures folder (in the home folder) to locate the iPhoto Library file.
Drag the iPhoto Library file to a new location on your computer.
Open iPhoto.
In the window that appears, select the library you want, and then click Choose.

Flex support for writing pad ( inputing chinese character)

I design a web application that allow customer to input their
messages into the database.
If the input is via keyboard, it is no problem. But it does
not work if the customer is using writing pad for inputing chinese
character.
Does Flash support this, if it is, how ?
Thanks

I'm sure there is a large part of the Mac market that couldn't care less about this, but for those who can use it it's a major reason for buying SL.
Actually I seen a fair amount of disappointment from people who found after buying SL that the trackpad character input feature is only available on a restricted number of machines, and some have felt misled by the advertising about it. Hopefully Apple will be able to expand its availability in the future.
I'd be curious what you find it most useful for: Input of text of some length into documents, emails, etc., or smaller tasks like looking up characters in dictionaries.

A suggestion about ipod touch

Please pardon me ,I don't very goog at English ,I'm a chinese.I want to make a suggestion about ipod touch's "home"key,I think it is bad in the future if we often useing it.I hope APPLE Company can adding a new key instead now the "home" key on the screen in the next firmware!Thanks a lot!

Click here and fill out the form.
(40845)

Display and Input Chinese conflict? +other qs.

I have a Swing Application - and I want to have part of the GUI in Chinese. (List boxes etc.) In order to do this, I use Bitstream Cyberbit font and it works fine.
In order to Input data in Chinese in a TextField, I use NJstar to do the data entry. This works fine on its own as well.
- Now, when I have an application to do BOTH the above, it does'nt work (I cannot input Chinese AND display chinese)
Do I need to use a font or something that comes with NJstar for DISPLAY as well?
Is there an underlying conflict between NJStar and BitStream Cyberbit on when working together - i.e. one cannot use bitstream cyberbit for display and NJstar's font for data entry?
- Data entered by entered by NJStar in chinese can be read by Java as Unicode? For example
//if textfield1 contains chinese characters (as entered by njstar)
String chineseString = jtextfield1.getText();
do I need to do any change in encoding??
- Sometimes NJstar enters rubbish (incorrect encoding) in my Swing window? Anyone had the same problem?
Please advise. TIA,
Carlos

Hi Carlos,
I'm yet to meet the Bitstream Cyberbit font, but one question sticks in my head. Is it a Unicode-based font?
AFAIK, NJStar enters all its data in a Unicode format, so it's possible that while Swing knows how to handle NJStar's input, the Bitstream font doesn't know how to display it.
As for the rest, the only other thing I can suggest is that every now and then CJK characters like to be converted over to UTF-16 in Java as opposed to UTF-8. I'm still not entirely sure why. :)
From memory, you can change the encoding of the data you're entering with NJStar, so that might be worth a shot.
Hope that helps!
Martin Hughes

Iam developing an application using NI-DAQ(AT-MIO-16E)card on vc++ environment.My requirement to extract amplitude of AM signal(1khz(4step waveform) on 70Mhz carrier).Mr Ben suggested about sampling.

My application is having a device that takes 1khz and 500Hz clock and 70Mhz carrier.And generates AM signal(1khz(4stepwaveform)on70Mhz).
each step of 250 micro sec.
Iam using couter0 and 1 outputs of NI-DAQ card for generating clock.
I need to generate a clock through card and syncronously i should acquire the 4 step levels
of incoming AM signal(1khz(4 step) on 70Mhz)in each cycle.And i should generate error voltage like e1=(step1-step3) volts
e2=(step2-step4) volts
for each cycle i need to generate e1&e2
I am planning to use
DAC0 and DAC1 pins on ni-daq card for sending errorvoltages.
For implementation of whole thing.what
ni-daq functions should i use.
I am planning to use DAQ_Rate and DAQ_Start functions for sampling the incoming signal.
counter functions for generating clock.
Mr Ben suggested about sampling AM signal.
that is about 40khz.10 samples for each step.
I need some help regarding how to interface the incoming signal(AM signal) with the card.
could it possible to connect signal directly to ni-daq card one of the analog input channels?.
regarding sycronization of clock and sampling of
incoming signal please help me.
thank you for ur help

Your two best resources for developing any Data Acquisition application are the manuals for your board and the examples shipped with NI-DAQ. Your board's manual should have information regarding wiring. That is, it has a section dedicated to how to connect signals to your board.
The examples shipped with NI-DAQ show several Input/Output methods. These should give you a general idea (if not a specific application to your project) of how a Data Acquisition system would look (AI config, start, read, close, etc). These examples can be found in the \examples directory.

How to configure my Firefox thus allowing me to input Chinese characters into the search box by using PenPower writing pad while this problem doesn't exist when I am using Internet Explorer?

I am using the electronic writing pad made by PENPOWER Inc. to input Chinese characters onto my PC programs (e.g. Winword, Internet Explorer, Excel, etc.) But I can not make it happened on Firefox, please advice what I have to do with the configuration of the Firefox or using any other method to make it work. Thanking you guys in advance for helping me to solve this problem.

cor-el,
Thank you very much for your advice. The new software of Penpower works rightaway after I installed it on my pc. Thanks again.
十分感激你的幫忙！

Suggestion about Report Generation Toolkit

I'm adding report generation capabilities to a labview product test application. The report will be 2-4 pages long with text and plots. For other applications, I've used Word Templates in the past using VBA and Visual Basis 6. I had been planning to use the Report Generation Toolkit, but when I tried to run the examples Labview doesn't find the installation of Office, (I'm using Windows Vista). I've already read other posts about this particular problem and other issues with the Report Generation Toolkit for Microsoft Office, including upgrading to Office 2007 and beyond and I'm beginning to wonder if there might be a better longterm solution than the Report Generation using Microsoft Office.
The two alternatives that I'm considering are HTML, and Simplicity AI's PDF toolkit (free),
http://www.simplicityai.co.uk/products_services/products/pdftoolkit/
which I still have to investigate. I figure I could always generate in HTML and then print to PDF using something like PDFcreator (free).
If anyone has any comments/reviews/suggestions about the report generation from Labview, I'd appreciate hearing them.

Hello PointOnePa,
What examples were you trying to run? Here's a good example on how to create report in Excel
http://zone.ni.com/devzone/cda/epd/p/id/1001
Which version of LabVIEW and Report Gen you do you have? For Reort Gen 2009, it offers support for MS Office 2007/2003/XP
http://digital.ni.com/public.nsf/allkb/45E349F79A55EAE6862575EF00614134
Andy Chang
National Instruments
LabVIEW Control Design and Simulation

How to a make a suggestion about new features i'd like to see in itunes

how to a make a suggestion about new features i'd like to see in itunes?
I can't find any link to do this. I found a page where you can request songs or an album to be added, but i can't find a page to submit my suggestions for itunes i have for new features i'd like to see

As of now there is no good, direct link for feedback on iTunes itself. Writing Apple might be the best option, with the website feedback page perhaps the next best.

I need some detail solutions and suggests about below these problems ?

I need some detail solutions and suggests about below these problems:
Problem 1: SAP Management Console cannot start successfully
Problem 1.1: Click on SAP Management Console, but yellow light continues for a long period of time.
Problem 1.2: In DOS, startsap command cannot start SAP R/3.
Problem 1.3: Oracle 9i database automatically shutdown by itself.
Problem 1.4: There is very low disk storage left (say less than 50MB) in the hard disk where Oracle 9i database is installed in the server.

3.1 - If you client copy from client 000, you need to go to SCC4 and set the client to customizing chnages allowed;
3.2 - If you do a client copy from client 800 (the one that SAP delivers data in) you should have data. Client 000 is empty (almost).
3.3 - You should be able to change the password of SAP* PASS user.
I am not sure which version you are dealing with, but ERP2004 and ERP2005 allow you to change the password suring installation.
Also, there is a parameter that can be maintained that allows you to log on as SAP*. If you set as not available, no one can log on.
Hope it helps,
Leonardo De Araujo

How can I input Chinese in the Playbook?

How can I input Chinese in the Playbook? such as in browers and contact

I think the only way to do that is to download an app, that lets you input pinyin for instance, then copy and paste from there. The last time I checked, there are 3 apps in the app world, all by the same person. I've no idea what the difference between them is.

Can't input Chinese characters in the Chinese forum

I have trouble to input Chinese characters in the Chinese forum.
It happened recently.
Before I can finish type PinYIng, the IME window lost focus to IE.
Other applications / web pages have no problem.
Tested on 2 PCs. Same problem.
English verson of Win7. 64 bit.
Please help !
George Zou
http://webspace.webring.com/people/og/gtoolbox

You probably did that, but just in case you didn't i'd use
.setFont(...);

Your opinion - suggestions about my website

I have published my website http://www.pcnetworks.gr (κατασκευή και φιλοξενία ιστοσελίδων) and I would apreciate your opinion and suggestions about the design of it and any ideas on how to make it more attractive. Thank you in advance

pcnw,
You might elaborate on the present use of colours, particularly the triple colours used on the first page at the top and at the bottom for the three levels, and also used elsewhere. In this connexion, you might consider designating a colour to each level and use that in the further pages, where the red appears for all as it is now, and to have a fourth general colour for other aspects/purposes.
The (final) colours chosen could reflect and give an impression of the levels: what they offer and what they require.

A suggestion about input chinese

Similar Messages

Maybe you are looking for