A Suggestion for the solution of AirPlay problem in old Mac's

Hi,
Today I bought an Apple TV 3 from Geneva Apple Store. Eventhough I told the responsible sellsman that I have a late 2010 iMac 27' with i7 Quad Core, he told me that I can use AirPlay. After coming home I realized that wasn't the reality. Fine, I am not going to complain... After some hours of search in google, finding out the reason of the problem and reading the reviews of AirParrot (which is bad for high quality video streaming), I didn't find any discussion about my idea:
Why isn't Apple or any third party developer coming up with a software solution to connect an iOS device containing H.264 chipset to the Mac with the USB cable and use the connected devices chipset to encode the video/audio and steam it wirelessly. Is there a thecnical barrier for this?
Well there may be a delay in the stream (because the processing chip will be not on the main board of the computer but on a USB connected device), but who cares if the movie is coming to the TV screen a few seconds later than the computer screen?
Could somebody please reply to this? I want to know why even it is impossible.
PS: Sorry for my english. I am not a native speaker.
Best,
Olgun Elicin

it's possible to make itunes enhancement requests directly to the Apple folks nowadays. here's a link through to the relevant itunes feedback form:
iTunes application feedback

Similar Messages

The power button on the top of my iPhone 5 is very difficult to turn on and requires an inordinate amount of pressure. Any suggestions for a solution?

The power button on the top of my iPhone 5 is very difficult to turn on and requires an inordinate amount of pressure. Any suggestions for a solution?

Check this website to see if your device is eligible for this program: https://www.apple.com/ca/support/iphone5-sleepwakebutton/

Songs stop playing on my iphone I try to start it again and it will not play for more than 2-4 seconds, does anyone have the solution to this problem?

I have Imatch and songs stop playing on my iphone I try to start it again and it will not play for more than 2-4 seconds, does anyone have the solution to this problem?

By "hard reset" you mean hold down the Home and power buttons until the iOS device restarts, correct?

HT4009 in app purchase from OMGPOP "Draw Something" of 400 coins never received - has anyone else had this problem and do you have a suggestion for me Tried "report a problem" and directed to this site."

in app purchase from OMGPOP "Draw Something" of 400 coins never received - has anyone else had this problem and do you have a suggestion for me Tried "report a problem" and directed to this site."

Hi AP_In_Surbiton,
I am really sorry that you have had so much trouble getting your Caller ID up and going. I'll be happy to help you out with this and get it working for you.
Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

I have several Files created in Logic Audio for windows bfreo v 5 wich can't open in Logic Pro X. Any ideas for a solution to his problem,

I have several Files created in Logic Audio for windows before v5.5.1 which can't open in Logic Pro X. Any ideas for a solution to this problem, The Windows files that were created in v5.5.1 open OK. I lost my XS key during a recent house move so can't update to windows files before trying to open in Logic Pro X
Swingtones

If you can open the windows files in windows you can bounce the tracks out as audio. Then load them in X

HT204406 I attempted to download iTunes match w/o success. Step 1 was fine. Step 2 gets stalled and will not move beyond 80%... Any suggestions for a solution? Why is iTunes stalling on step 2?

I attempted to download iTunes match w/o success. Step 1 was fine. Step 2 gets stalled and will not move beyond 80%... Any suggestions for a solution? Why is iTunes stalling on step 2?

Hi folks,
I found a solution in case your MATCH is still buggy...
JUST BOOT YOUR MAC HOLDING THE SHIFT KEY (until you see a progress bar).
Then in itunes disable and re-enable iTunes Match.
It should rescan all your library and eventually works.
At the end just reboot your Mac normally.
Best regards from Paris.
Nico

I use an ipad4, it keeps getting stuck randomly and i have to power it off and switch it on again. whats the solution to this problem?

i use an ipad4, it keeps getting stuck randomly and i have to power it off and switch it on again. whats the solution to this problem?

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

Reset SMD-Configuration data for the solution

Hello!
I would like to know how to reset the configuration data for the solution in SMD wizard.
The solution has already the status "green" --> "This solution is ready for Diagnostics".
The problem is that I cannot change the settings for the server ("Setup parameters").
The instance number there (98) cannot be changed.
Further question:
how to install the introscope agent via SMD Wizard?
If I choose the solution and press "Setup Introscope Agent" I get the warning:
The landscape definition of the selected system is empty. Operation has been aborted
Furthermore I cannot see any parameters:
neigther for Server Node Details nor for Current VM Parameters. Here I get the warning:
There is no detail available for this server node. Check the Last Operation Result pane for more information.
Any helpful information wil be appreciated.
Thank you very much!
regards
Thom

Hi Thom,
To reset configuration there is possibility to remove Landscape Info using
Diagnostics Administration -> Diagnostics System -> Landscape management.
For your issue with Wily, you must have a solution correctly define. this setup will not work until you have it.
Frederic

Is there any suggestion for the "SafeNamedCache was explicitly released"

I deployed the coherence-java-3.6.0-java on red had with core 2.6.18 with 64 bit.
Then the deployed the coherence-3.6.0-cpp on the same manchine and complied the example "hellogrid" and it works ok . No any error .
My requirement is to integrate the Coherence into the Nginx0.7.62 for my web server . And i wrote a thread pool for the NameCache::handle and get a newly hendle after a 5 seconds just because of the error "was explicitly released" . But it is not useful for solving the problem .
Anybody please give me a suggestion for the root cause of this problem .
Thanks .
And the configurate as follows which are all copied from the configurate file for the example "hellogrid"(coherence-cpp/examples/config/extend-server-config.xml and coherence-cpp/examples/config/extend-cache-config.xml):
extend-server-config.xm:
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<defaults>
<serializer>pof</serializer>
</defaults>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>dist-*</cache-name>
<scheme-name>example-distributed</scheme-name>
</cache-mapping>
<cache-mapping>
<cache-name>repl-*</cache-name>
<scheme-name>example-replicated</scheme-name>
</cache-mapping>
<cache-mapping>
<cache-name>local-*</cache-name>
<scheme-name>example-local</scheme-name>
</cache-mapping>
<cache-mapping>
<cache-name>*</cache-name>
<scheme-name>example-distributed</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<distributed-scheme>
<scheme-name>example-distributed</scheme-name>
<service-name>DistributedCache</service-name>
<lease-granularity>member</lease-granularity>
<backing-map-scheme>
<local-scheme/>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
<replicated-scheme>
<scheme-name>example-replicated</scheme-name>
<service-name>ReplicatedCache</service-name>
<lease-granularity>member</lease-granularity>
<backing-map-scheme>
<local-scheme/>
</backing-map-scheme>
<autostart>true</autostart>
</replicated-scheme>
<local-scheme>
<scheme-name>example-local</scheme-name>
</local-scheme>
<invocation-scheme>
<scheme-name>example-invocation</scheme-name>
<service-name>InvocationService</service-name>
<autostart>true</autostart>
</invocation-scheme>
<proxy-scheme>
<scheme-name>example-proxy</scheme-name>
<service-name>ProxyService</service-name>
<thread-count system-property="tangosol.coherence.extend.threads">2</thread-count>
<acceptor-config>
<tcp-acceptor>
<local-address>
<address system-property="tangosol.coherence.extend.address">localhost</address>
<port system-property="tangosol.coherence.extend.port">9099</port>
</local-address>
</tcp-acceptor>
<outgoing-message-handler>
<request-timeout>5s</request-timeout>
</outgoing-message-handler>
</acceptor-config>
<autostart>true</autostart>
</proxy-scheme>
</caching-schemes>
</cache-config>
extend-cache-config.xml:
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<defaults>
<serializer>pof</serializer>
</defaults>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>local-*</cache-name>
<scheme-name>local-example</scheme-name>
</cache-mapping>
<cache-mapping>
<cache-name>near-*</cache-name>
<scheme-name>near-example</scheme-name>
</cache-mapping>
<cache-mapping>
<cache-name>dist-*</cache-name>
<scheme-name>extend-dist</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<local-scheme>
<scheme-name>local-example</scheme-name>
</local-scheme>
<near-scheme>
<scheme-name>near-example</scheme-name>
<front-scheme>
<local-scheme>
<high-units>100</high-units>
<expiry-delay>1m</expiry-delay>
</local-scheme>
</front-scheme>
<back-scheme>
<remote-cache-scheme>
<scheme-ref>extend-dist</scheme-ref>
</remote-cache-scheme>
</back-scheme>
<invalidation-strategy>auto</invalidation-strategy>
</near-scheme>
<remote-cache-scheme>
<scheme-name>extend-dist</scheme-name>
<service-name>ExtendTcpCacheService</service-name>
<initiator-config>
<tcp-initiator>
<remote-addresses>
<socket-address>
<address system-property="tangosol.coherence.proxy.address">localhost</address>
<port system-property="tangosol.coherence.proxy.port">9099</port>
</socket-address>
<socket-address>
<address system-property="tangosol.coherence.proxy.address">127.0.0.1</address>
<port system-property="tangosol.coherence.proxy.port">9099</port>
</socket-address>
<socket-address>
<address system-property="tangosol.coherence.proxy.address">172.16.1.23</address>
<port system-property="tangosol.coherence.proxy.port">9099</port>
</socket-address>
</remote-addresses>
<connect-timeout>10s</connect-timeout>
</tcp-initiator>
<outgoing-message-handler>
<request-timeout>5s</request-timeout>
</outgoing-message-handler>
</initiator-config>
</remote-cache-scheme>
</caching-schemes>
</cache-config>
Anyone who knows the root cause please tell me . Thanks .

The original error shown in the console of the Coherence server as follows :
2010-11-23 22:27:33.742/1566.313 Oracle Coherence GE 3.6.0.0 <D5> (thread=Proxy:ProxyService:TcpAcceptorWorker:0, member=1): An exce
ption occurred while processing a PutRequest for Service=Proxy:ProxyService:TcpAcceptor: java.lang.IllegalStateException: SafeNamedC
ache was explicitly released
at com.tangosol.coherence.component.util.SafeNamedCache.ensureRunningNamedCache(SafeNamedCache.CDB:23)
at com.tangosol.coherence.component.util.SafeNamedCache.getRunningNamedCache(SafeNamedCache.CDB:1)
at com.tangosol.coherence.component.util.SafeNamedCache.put(SafeNamedCache.CDB:1)
at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.put$Router(NamedCacheProxy.CDB:1)
at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.put(NamedCacheProxy.CDB:2)
at com.tangosol.coherence.component.net.extend.messageFactory.NamedCacheFactory$PutRequest.onRun(NamedCacheFactory.CDB:6)
at com.tangosol.coherence.component.net.extend.message.Request.run(Request.CDB:4)
at com.tangosol.coherence.component.net.extend.proxy.NamedCacheProxy.onMessage(NamedCacheProxy.CDB:11)
at com.tangosol.coherence.component.net.extend.Channel.execute(Channel.CDB:39)
at com.tangosol.coherence.component.net.extend.Channel.receive(Channel.CDB:26)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Peer$DaemonPool$WrapperTask.run(Peer.CDB:9)
at com.tangosol.coherence.component.util.DaemonPool$WrapperTask.run(DaemonPool.CDB:32)
at com.tangosol.coherence.component.util.DaemonPool$Daemon.onNotify(DaemonPool.CDB:63)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
at java.lang.Thread.run(Thread.java:619)
It is shown again and again for any operation before the Coherence server is restart.

HT1420 No longer authorized to enter the account was used to five devices have exhausted all attempts to please you to the solution to this problem I reside in recursion and I'm not good at English Language

No longer authorized to enter the account was used to five devices have exhausted all attempts to please you to the solution to this problem I reside in recursion and I'm not good at English Language

MMS will be available for the 3G and 3GS in two weeks - on Friday, September 25th - likely with a carrier update made available via iTunes.
In the interim - for the next two weeks, ask the sender of an MMS to address the MMS to an email address that you access with the iPhone's Mail client - the sender will enter your email address in the To: field for the MMS instead of your cell phone number with area code. The MMS will be received by you as an email with the photo as an attachment. This will give you the sender's cell phone MMS email address. Add this email address to the contact's info in your iPhone's address book. If you want to send an email with a photo attached as an MMS to this person, address the email to their cell phone MMS email address. The email with the photo attached will be received as an MMS.
This will be required for another two weeks.

Short dump suggest me the solution

hi friends,
i am geeting the short dump when i execute the program
because here i am taking the ranges some times the ranges is very high in that time only i am getting the short dump
please suggest me any alter native
i am sending the samll code
Ranges;r_vbeln for vbap-vbeln,
            r_posnr for vbap-posnr.
if not ( it_vbap[] is initial).
select matnr werks strgr
from marc into table it_marc
for all entries in it_vbap
where matnr = it_vbap-matnr
and erks = it_vbap-werks.
select vbeln posnr vbelv posnv
from vbfa
inti corresponding field of table it_cont
for all entries in it-vbap
where vbeln eq it_vbap-vbeln
and posnn eq it_it_vbap-posnr
and vbtyp_v eq 'g'.
r_vbeln = r_posnr = 'IEQ'.
LOOP AT IT_CONT.
r_vbeln-low = it_cont-vbelv. collect r_vbeln.
r_posnt-low = it_cont-posnv. collect r_posnr.
endloop.
LOOP AT IT_vbap.
r_vbeln-low = it_vbap-vbelv. collect r_vbeln.
r_posnt-low = it_vbap-posnv. collect r_posnr.
endloop.
the below select statement time only i am geeting the short dump
select matnr werks lgort charg kalab vbeln posnr sobkz
     from mska
    into table it_mska
for all entries in it_vbap
where matnr = it_vbap-matnr
and werks = it_vbap-werks
and sobkz = 'e'
and vbeln IN r_vbeln
and Posnr in r_posnr.
i need the same output please suggest me the solution to write above select statement is ther any other way
Regards
srinu

Hi,
It is better not to use a range directly in the where condition. This is because when the range values are more it will give a dump. To avoid this, inside the program we need to build a logic to select records in a batch from the range.
For example,
a) if the range has say 10,000 records,
b) first take 1000 records from the range and then put it in an internal table and use this internal table for selecting records from the database (for eg MSKA).
c) Append the first 1000 records the database table into an itab.
d) Then take the next 1000 records from the range and select the data from database table and so on.
e) Repeat this process untill all the records in the ranges are finished.
This will definitely avoid a dump.
Please reward useful answers.
Regards
Vimal

"Display PDF in Browser" setting - $500 reward for the solution

The corporate policy requires the "Display PDF in Browser" setting to be unchecked for all applications, this is to open the PDF document in new reader instance but our specific application needs the reader to be opened in the same browser even if the preference "Display PDF in Browser" is unchecked.... The setPreference from javascript (html) doesn't seemed to work... How do i make this work? I am looking for programatic way to set this preference in HTML javasript or Java Applet or ActiveX or any other means. I am currently using JS and Object tag, the only functions that we need at this point are page navigation and getting current page using JS.
Also, I need the links the browser to open in new browser once the PDF is loaded... do I need to reset the preference once it is loaded for the links to open in new browser? How can this be progrmatically achieved without altering the original PDFs?
I realize that this may be difficult and am looking for workarounds or alternate solutions to meet my req. $500 for anyone who could can provide solution.. Please email me [email protected]
thanks,
- Ray

Convince your IT people to allow folks to set their preference to display in browser.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Sun, 13 Nov 2011 14:58:23 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: "Display PDF in Browser" setting - $500 reward for the solution
Re: "Display PDF in Browser" setting - $500 reward for the solution
created by pdf_disp_issue<http://forums.adobe.com/people/pdf_disp_issue> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4023302#4023302

TS3988 i want to delete my iCloud account and get a new one. but i can not delete as it says that my iphone is being restored. could anyone tell me what would be the solution to my problem. i will be thankful to you..

i want to delete my iCloud account and get a new one. but i can not delete as it says that my iphone is being restored. could anyone tell me what would be the solution to my problem. i will be thankful to you..

You can go to icloud.com, open Mail, click on the gear shaped icon on the upper right and choose preferences, go to the Vacation tab and set up an auto response saying that the account is no longer in use. Then go to Settings>iCloud and turn Mail to Off on your device and stop using the account.
Incoming email to the account will receive your vacation auto response, and eventually the mailbox will fill up and no longer receive mail at all.

I would like to make a suggestion for the next iso iphone 4-4s update. Include a seperate treble and bass switch. What do u people out there think about this

I would like to make a suggestion for the next iso itunes software update for the iphone 4-4s. Include a serperate treble and bass switch for the ipod on the iphone. What to you people out there think about this?

vince20 wrote:
Obviously you dont like listening to music on your ipod in iphone. The EQ is crap
Not true at all.
I listen to music on my iphone all the time.
It is your position that anyone who does not agree with you does not listen to music?
Really?
What a leap.

When I copy/paste a paragraph from a PDF doc, it pastes with no spaces between words. How can I fix this? I've searched everywhere for the solution but didn't find anyone had this issue.

When I copy/paste a paragraph from a PDF doc (onto Facebook status bar, for example) it pastes with no spaces between words. I.e: "The manhadajugofcoolwaterand offeredmeadrink." How can I fix this? I've searched everywhere for the solution but didn't find anyone had this issue. I'm new to Apple so any help will be much appreciated. Thanks!

I can't speak about this occurring with FaceBook since I don't use FaceBook, but I see the same type of thing when I copy and pasted from websites. It doesn't always happen and I cannot find any particular set of circumstances under which it occurs or does not occur.
I am merely responding to let you know that it happens to me as well and I have seen no way to correct it. I'm not so sure that there is a way to correct in in that it may have something to do with how the original text is formatted in the PDF or on the website and how it eventually "fits" into the text field or the area in which it is pasted.

A Suggestion for the solution of AirPlay problem in old Mac's

Similar Messages

Maybe you are looking for