A Suggestion, "More from this artist" when using shuffle

I love shuffle, but sometimes when an artist comes on that I like, I want to stop shuffling for a minute and listen to more music for this artist. Does anyone else think it would be cool if there was a "more from this artist" button in the "now playing" screen?

Interestingly, you can do something similar to your suggestion on an iPod shuffle. An iPod shuffle is like a mobile playlist. If you put the songs on it so that songs are ordered sequentially by artist, you can flip the shuffle's switch between shuffle and +play sequentially+. You can be shuffling along between songs and if you want to hear another song by the same artist, switch from shuffle to +play sequentially+ and the next and/or previous songs will be by the same artist (assuming there is another song by the same artist on the shuffle).
So, although it won't be as convenient as on an iPod shuffle, you can do the same thing with a regular playlist on a regular iPod. First, you need a playlist with all your favorite artist's songs or you can make a playlist with your entire music library. The song order should group artists together. Sync the playlist to the iPod. To shuffle while playing the playlist, start playing any song on the playlist and go to +Settings > Shuffle > Songs+. To play sequentially (more songs by the same artist), go to +Settings > Shuffle > Off+ while the songs is still playing. The next and/or previous songs will be by the same artist. To go back to shuffle mode, go to +Settings > Shuffle > Songs+ again.

Similar Messages

  • How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.

    How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.
    I've tried plugging the hdmi into the TV directly and the receiver.
    I get video every time.  HBO to Go , Xfinity, ABC, Youtube, etc...
    just no audio.  Any suggestions? 
    I've tried starting the apps then plugging in the hdmi cable.
    I never tried this before I upgraded to IOS 5.

    Claudiamil-
    I had not tried it with mine since upgrading to iOS 5, so I just did.  I'm using a small Vizio HDTV.  I did not try YouTube, but did try several videos and musical numbers.  In all cases there was sound, including stereo when the source had it.
    I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down.  Dah*veed's suggestion to reset may be what you need.
    Fred

  • I cannot open pdf files from one supplier when using Adobe Reader but I can using another Viewer

    I cannot open pdf files from one supplier when using Adobe Reader but I can open it if using Google PDF viewer or another viewer. The Adobe reader gives the error "There was an error opening this document. The file is damaged and could not be repaired" when I try to open the file. The version of Adobe Reader is 10.1.7, however I have tried other versions and they all fail the same way.  I have tested on a number of different PC's in different networks and all fail using Adobe Reader but work using alternate viewer. Also the PC's will open a PDF from any other source.

    Newer Reader versions are more strict than older versions (and other PDF viewers).  If certain minimum requirements are not met, Reader will tell you that the PDF is damaged.  This can happen when a document was created with software that does not adhere to PDF standards, or when the file was damaged during a download or email transmission.
    You should contact the creator of these PDFs.

  • About the error: "The account is not authorized to login from this station" when you access NAS devices from Windows 10 Technical Preview (build 9926)

    Scenario:
    With the release of Windows 10 Technical Preview (build 9926), some users may encounter an error message of “The account is not authorized to login from this station” when trying to access remote files saved in NAS storage. In
    addition, the following error log may also be found via Event Viewer:
    Rejected an insecure guest logon.
    This event indicates that the server attempted to log the user on as an unauthenticated guest but was denied by the client. Guest logons do not support standard security features such as signing and encryption. As a result,
    guest logons are vulnerable to man-in-the-middle attacks that can expose sensitive data on the network. Windows disables insecure guest logons by default. Microsoft does not recommend enabling insecure guest logons.
    Background:
    The error message is due to a change we made in Windows 10 Technical Preview (build 9926) which is related to security and remote file access that may affect you.
    Previously, remote file access includes a way of connecting to a file server without a username and password, which was termed as “guest access”.
    With guest access authentication, the user does not need to send a user name or password.
    The security change is intended to address a weakness when using guest access.  While the server may be fine not distinguishing among clients for files (and, you can imagine in the home scenario that it doesn’t
    matter to you which of your family members is looking at the shared folder of pictures from your last vacation), this can actually put you at risk elsewhere.  Without an account and password, the client doesn’t end up with a secure connection to the server. 
    A malicious server can put itself in the middle (also known as the Man-In-The-Middle attack), and trick the client into sending files or accepting malicious data.  This is not necessarily a big concern in your home, but can be an issue when you take your
    laptop to your local coffee shop and someone there is lurking, ready to compromise your automatic connections to a server that you can’t verify.  Or when your child goes back to the dorm at the university. The change we made removes the ability to connect
    to NAS devices with guest access, but the error message which is shown in build 9926 does not clearly explain what happened. We are working on a better experience for the final product which will help people who are in this situation. 
    As a Windows Insider you’re seeing our work in progress; we’re sorry for any inconvenience it may have caused.
    Suggestion:
    You may see some workarounds (eg. making a registry change restores your ability to connect with guest access).
    We do NOT recommend making that change as it leaves you vulnerable to the kinds of attacks this change was meant to protect you from.
    The recommended solution is to add an explicit account and password on your NAS device, and use that for the connections.  It is a one-time inconvenience,
    but the long term benefits are worthwhile.  If you are having trouble configuring your system, send us your feedback via the Feedback App and post your information here so we can document additional affected scenarios.
    Alex Zhao
    TechNet Community Support

    Hi RPMM,
    Homegroup works great in Windows 10 Technical Preview (9926 build), when I invited my Windows 10 Technical Preview (9926 build) joined in HomeGroup, I can access the shares smoothly:
    My shares settings is like this:
    Alex Zhao
    TechNet Community Support

  • How do i stop the rainbow coloured circle from appearing especially when using IPhoto?

    how do i stop the rainbow coloured circle from appearing especially when using IPhoto?

    Back up all data immediately as your boot drive may be failing.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|Previous Sh' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

  • To run a report from command line, when using jdbc-odbc bridge

    Hi,
    How to run a report from command line, when using jdbc-odbc bridge?
    Usually with tns, we do by "rwrun module=<> userid=<user>/<passwd>@tns".
    with odbc, we do by "rwrun module=<> userid=<user>/<passwd>@odbc:DSN"
    Please specify, what is command line arguments for jdbc-odbc bridge driver?
    Environment : Oracle 9i Report Builder on WinNT
    Database : Sybase
    Regards,
    Ramanan

    Hello Ramanan,
    Report Builder : connect JDBC Query in Report Builder is to through Connection Dialog in JDBC Query Editor. User can use a Sign on parameter (can use, default : P_JDBCPDS or can create new) to connect to JDBC Data Source. Connection once made will be mentioned and will be reused through out Reports Builder.
    JDBC PDS allows user to connect one or more same or different kind of databases.
    While running report through runtime or Server, user can pass the sign on parameter(connection string) value, like any other user parameter.
    Syntax for connection string : <username>/<password>@databaseURL . The syntax of database part of connection string depend on the type of JDBC Driver used to connect to Data Source while designing the JDBC Query. databaseURL refer to the location of the database and its format depend on the JDBCPDS river selected in design time while creating the JDBC Query.
    rwrun eg :
    rwrun report=jdbc_odbc.rdf destype=file desname=output.html desformat=html P_JDBCPDS=scott/tiger@database
    Server eg :
    http://server.com:8888/servlet/RWServlet?server=MyReportServer+report=jdbc_odbc.rdf+destype=cache+desformat=html+P_JDBCPDS=scott/tiger@database
    http :
    Please see ORACLE_HOME/reports/conf/jdbcpds.conf for more information.
    With Regards
    Reports Team

  • I can't seem to use the 'Check seats' link on Delta when I use Firefox but Safari works fine. I get the message 'not available at this time' when using Firefox but when I go to Safari it works fine.

    I can't seem to use the 'Check seats' link on the Delta Airlines site when I use Firefox but Safari works fine. I get the message 'not available at this time' when using Firefox but when I go to Safari it works fine. I love Firefox but this sucks!

    That issue can be caused by corrupted cookies.
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    *http://kb.mozillazine.org/Cookies

  • [svn:fx-3.x] 11959: Removing rpc-encoded id attributes from the referent when used as a multiRef  (i.e.

    Revision: 11959
    Revision: 11959
    Author:   [email protected]
    Date:     2009-11-18 14:16:08 -0800 (Wed, 18 Nov 2009)
    Log Message:
    Removing rpc-encoded id attributes from the referent when used as a multiRef (i.e. referenced via an href attribute). These attributes should not be included in generic deserialization of types to ActionScript (e.g. when deserializing xsd:anyType).
    QE notes: Yes, this should fix the regression. We'll still need a further change to remove attributes in SOAP and XSI namespaces.
    Doc notes: N/A
    Bugs: SDK-23140
    Reviewer: Svetlin
    Tests run: Checkintests, bug test case
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-23140
    Modified Paths:
        flex/sdk/branches/3.x/frameworks/projects/rpc/src/mx/rpc/soap/SOAPDecoder.as

    any chance you are using atheros wifi?

  • [iPad Mini no Retina, iOS 7.0.4] Sound in only one side of earphone (no mic), but sound come from both sides when using FaceTime

    Recently, I found with iPad Mini w/o Retina, iOS 7.0.4, the sound comes only from left side of my earphone when listening music, watching YouTube videos, even playing system sound. But the sound come from both sides when using FaceTime.
    Earphone is not broken. Plug completely into the audio jack. This problem only shows up recently, worked fine weeks ago.
    Anyone has the same problem? Or has some solution on this issue?

    Settings>General>Accessibility>HEARING>Adjust the Left and Right Speaker with slider

  • I am new to apple hardware, and since upgrading software on my iphone 4S I receive this message.  "this accessory is not supported by this iphone" when using my clock radio docking station. Is there away around this?

    I am new to apple hardware, and since upgrading software on my iphone 4S I receive this message.  "this accessory is not supported by this iphone" when using my clock radio docking station. Is there away around this?

    Hello GuynStPete,
    Thanks for using Apple Support Communities.
    I found the following support article that has some troubleshooting steps for you to follow in order to resolve this issue you're experiencing:
    Resolve issues with iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/TS2634
    Take care,
    Alex H.

  • How stop PS6 from removing the DPI value from an image when using "save for the web"?

    How stop PS6 from removing the DPI-value from an image when using "save for the web"?
    Example:
    - Open a tif image, that contains a dpi value (resolution).
    - Use the splice tool in PS6.
    - Export the slices with "Save for web", as gif-files.
    Then the dpi value is removed, the gif files has no dpi value (it's empty).
    How can we stop PS6 from removing the dpi value when using "save for web"?
    OR:
    When using the slice tool, how can we save the sliced pieces without PS removing the dpi value?

    you can make your art go a little bit over the bounds. or you can make sure your artboart and art edges align to pixels

  • How do I stop Firefox from creating untitled web pages when I try to send email from a web page. The only way I have found is to turn the computor off and then reboot. I don't have this problem when using Internet Explorer

    Every time I click on a web site that has an email option the browser starts making untitled web pages and never stops unless I turn the computer off. It is very frustrating to not be able to use an email option when offered by a web site. The only way I can send email messages on the Firefox browser is to go into my hotmail acct. and copy and paste the addresses. I don't have this problem when I use the Internet Explorer browser.

    See [[Firefox keeps opening many tabs or windows]]

  • With my iPod Touch I need to reboot the wi-fi about half the time when accessing wi-fi connected apps, more like 80 percent when using Viggle. Irritating.

    My iPod Touch has a quirky wi-fi connection. About half the time I need to go to settings and reboot the wi-fi to use apps like weather and mail, more like 80 percent with Viggle. It is irritating. Is it an iPod software problem? I don't have this problem with other platforms.

    Do you have this problem when connected to other networks?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If you ony have the problem with your network that indicates a problem with your router.

  • HT1947 Why can't I see all songs for an artist when using iPad remote for home sharing music through apple tv.

    Why can't I see all my songs for an artist when I search by artist using iPad remote? I'm listening to music via home sharing through apple tv using iPad 2 as my remote. All my songs seem to be listed fine under "songs", but when I select "artist" many of the songs I have for that artist are not there, any idea why that is or how I can fix this.....I suspect it's because many songs may not be associated with an album and it seems only songs in albums are displayed when I search by artist.

    Thanks Ferretbite, but that's not the issue in my case, the songs are not part of a compilation. I just checked several of them and the "Part of a compilation" box is unchecked.....it seems as if the song does not have an album associated with it, it will not display under the artist when I search by artist on the iPad remote which REALLY stinks.
    Hope someone else might have a solution.

  • How to remove namespace prefix from target payload when using HTTP in PI7.0

    Hi,
    i have a requirement to remove namespace prefix from target payload when receiver receives the payload by an HTTP request.
    i am not able to use XML Anonymizer Bean as in HTTP channel its not possiile.
    Target structure after mapping now is:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns3:Order xmlns:ns3="urn:xxx-com:pi:project">
    fields
    </ns3:Order>
    i need the target structure after mapping should look like:
    <?xml version="1.0" encoding="UTF-8"?>
    <Order xmlns:="urn:xxx-com:pi:project">
    fields
    <Order>
    i removed namespace from source and target Message Type of message mapping but still getting "ns3" prefix. My requirement is to just have this ns3 removed.
    Please reply if anyone has solved this problem before.
    Thanks

    Hi ,
    >>>i removed namespace from source and target Message Type of message mapping but still getting "ns3" prefix. My requirement is to just have this ns3 removed.
    Which process you've used for removing namespace...java/xslt mapping. In case of java mapping plese remove ns3 while creating the target element. Please go through the below blog it may help you.
    Quick Tips: Dealing with Namespaces in XI/PI
    Regards,
    Priyanka

Maybe you are looking for