A summary of this forum for perspective Nokia buye...

I have been on this forum for about 2 weeks (not long I admit) ever since the release of "free" navigation for (your) Nokia phone.
Since then I have observed the following:
Nokia blatantly refuse to acknowledge or comment on issues which make them look bad, to whit;
- Nokia maps not working with BlueTooth
- Nokia Maps failing to update on certain handsets
- A time/date bug causing phones to crash when using Nokia Maps
- Nokia voice files failing to install due to an LUA error
- Nokia's refusal to comment on whether certain phones will be supported
- Nokia's refusal to answer questions directly either on or off the record
- Numerous complaints by customers mislead by Nokia's blatant lie that Nokia Maps are     now free for phone.
- Nokia's license servers failing to work when a license is purchased.
- Nokia's license servers rolling licenses forward to version 3, and then being unable to work with version 2 when any of the previously mentioned issues arise.
Nokia have further seen more than 40 users post to say they will never buy another Nokia (myself included) PURELY regarding the dishonesty they have shown with their handling of the maps situation. Nokia have still not commented, nor stated publicly their intentions with regards to these issues.
Nokia have, in short, angered their (once) loyal customer base and driven numerous people away for the opportunity to (falsly) advertise free navigation on their phones.
I feel the above is a fairly apt description of the occurences of this board over the last 2 weeks.
Does anyone else want to point out something I have missed/agree/disagree with me?
Please post your (reasoned and intelligently ONLY!) oppinions here, and lets see if we might be able to get through to Nokia.
Perspective buyers, watch this thread.
EDITED - I messed up the formatting rather badly.
If you read something you liked, or found this post useful, hit the green Kudos button on the left.

Err, if you post here, you really shouldnt expect Nokia to reply to you since this is aUSER-TO-USER FORUM. The Nokia hired moderators here arent even technicians who could answer some of the questions. They're just here to enforce forum rules. Some Nokia employees do come around from time to time, but that's so rare as to us not expect them here at any given time. If you want an official Nokia response to your queries, the only way would be to mail them through the contact us button at the top of the page.
As for shamelessly ignoring questions regarding n95 and n96, lets see. They announced that they were working on the maps to be compatible on other s60v3FP2 phones to be available this year, hopefully within the first half (n96 included). This has been already answered before. Then somebody comes in and posts the same question again. It is answered. A few days later someone else asks it again. Personally, some people here do get tired of answering the same question again and again sometimes at intervals of a few hours of each other. Most of the people here who answer your questions arent Nokia employees and are in no way obligated to answer your questions if they have already answered it like 5 or six times. I've seen here posts regarding the new answer key for the v40 5800 right next to each other asking the same thing, and one of the threads was answered. 
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Similar Messages

  • Can't activate my Premiere 1.5. ( updated to 1.5.1 )  Adobe sent me to this forum for help

    After I format and reinstalled my programs I can;t activate my Adobe premiere pro 1.5 ( updated to 1.5.1) .
    I contacted Adobe at their home page Contact Customer Care , and they send me to this forum for answers.
    Can somebody please help in a dummy language. ( I do not understand a lot of the technical language )
    Thank you in advance.

    that's too old to activate.  you can use cs2, Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

  • How do I post edge material on this forum for download

    how do I post edge material on this forum for download.

    Dropbox, box.net etc...
    Then post the link.

  • What is this forum for?

    No questions get answered, so why have it?

    As far as any unanswered questions in the forums (and I see none in your Profile > Activities) :
    Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Want to create a posrtal Similar as this forum for internal Team use .

    I am new to portal development .
    so i want to make a Portal similar to this kind of forum for internal team use. I want to connect it to R3 so i need hepl regarding this .
    How and if possible anyone having a code would be very helpful.
    Developers please help in making this kind of a tool / forum for internal use.

    Dev,
    Check this blog, im sure it would be handy
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/KMC/Forums7.00Configuration
    Good Luck.
    Sandeep Tudumu

  • Isnt this forum for the oracle techies to answer?

    hi,
    I was thinking that this forum is "monitored" by the oracle techies and answers can be expected instantly, but I have posted a topic here and been waiting endlessly as what they say.

    Hi,
    Some reply at last !! , I did post a question in the JDBC
    (Oracle JDBC driver does not support Datatypes defined in java.sql? forum but there was no reply, and hence was my posting in other forums.

  • Why do I never get an answer to any questions asked on this forum for years now? Why does Firefox Feedback not work? Why does Firefox Suggestion system not work? Why have I switched to Google Chrome (I can answer that last one).

    I keep asking questions about problems and see them posted in the "support" forum and usually with a note about how many other users have this problem. There are never any answers or replies even though some of the number for others with the problem are huge.
    As I say, I have only one answer to many questions, my last one, which is why have I switched to Google Chrome. I know the answer to that one.

    I so agree with what you say and am in exactly the same position - very sad. Was strong supporter of FF but will have to move elsewhere for my browser after many years with FF

  • I'm joining this forum for a lack of other options.

    I love the phone we have (my wife's) it's a continium. So here's the story and I'll try to keep it as brief as I can. On Sept-2 2011 my wife's phone (at that time was a LG chocolate) locked up and we couldn't do anything with it not even turn it off so I removed the battery and it still would freeze. Took it to the verizon store and they said looks like you need a "new" phone for they couldn't make the LG work either. dissappointied we bought the Continium. This is where it gets interesting. Before Sept-2 we had full signal strength when we brought the new phone home we couldn't even hold a call, took several call attempts to complete a call, although...we did have 3G coverage but no "voice" we had a max of 1 bar (remember we had full strength prior). I placed a service call and was told..well looks like there are some things going on out there we'll turn the ticket over to the appropriate technicians. They called me about three days later and said the tech had "re-aimed" the antennas...ha...I live less than one one and a half miles from Tower site #5825 and the antennas can't be re-aimed I can see them they are not on a rotor. plus I'm a "HAM" radio operator I know a little about these things.  So I called three more times and so far I'm unhappy with "service" from Verizon I just want my signal to go back to what it was prior to Sept-2-2011. I fluxuate from -96db to -100db for signal strength. When I asked the tech on the phone what he felt was acceptable he replied "oh...-60db would be good that's about what we get here in our office using the wifi. well..I'm a ways from that...so my issue is my wifes voice is chopped like a bad sat signal on dish network or direct tv..most times I can't understand her. It's frustating.
    Does anyone have a techniqe for getting through to the service team that there is something going on at the tower site?? I'm running out of patience.
    Thanks!

    Hi kc8jvh,
    I am sorry to learn that your wireless signal is different with your new Continuum phone and is weaker than the signal you received with your previous phone. According to your post you have called our customer service department and the issue was escalated to our technical support department. While our technical support department will do everything possible to resolve your signal concerns please keep in mind that different devices do have different reception capabilities and regardless of any technical adjustments the signal may not improve for your current phone while indoors.
    I trust that you have reprogrammed the phone as suggested by demmo86rt by dialing *228 option 2 as this process may improve your phone's signal reception.
    Since we are not able to guarantee indoor service due to multiple factors that may interfere with a wireless signal, the use of a Network Extender has been an effective resolution for other customers experiencing indoor service issues. I would recommend considering acquiring the Network Extender to resolve your indoor service concerns.

  • I hate to use this forum for simple lessons but

    I have a JFrame with lots and lots of JLabels on it...I want to paint the JFrame background and make the JLabels' background transparent...I use the following in my JFrame's paint method:
    public static class statWindow extends JFrame {
    statWindow(String caption) {
    super(caption);
    public void paint(Graphics g) {
    super.paint(g);
    window.setBackground(Color.white);
    the window flickers white for a second, but then returns to that dull gray...two of the JLabels whose background i explicitly set to the window's bgcolor turn white; why does that matter? am i tying a reference to the window's background? and why won't the window stay white?

    (not all code listed..)
    public statWindow window;
    public static class statWindow extends JFrame {
    statWindow(String caption) {
    super(caption);
    public void paint(Graphics g) {                                   
    super.paint(g); // to make JLabels appear even though i am painting 3drect's below
    if (currSelectedMatchup == -1) {
    return;
    for (int i = 0; i < 12; i += 2) {
    g.draw3DRect(10,37 * i + 60,250,55,false);
    for (int j = 0; j < 9; j++) {
    for (int h = 0; h < 2; h++) {
    g.draw3DRect(h * 350 + 275,55 * j + 60,337,50,false);
    more code
    public static void main() {
    window = new statWindow("StatTracker - Week " + currWeek);
    window.setBackground(Color.white);
    }

  • A POSITIVE thread in this forum for once

    i posted here before i got my macbook, with worries that it would have some problems like everyone else here, but i've had my MB for 3 days, and its been working fine, nothing wrong yet
    keyboard is great, screen is beautiful, photobooth is great when i turn it on when a friend is looking at it and it scares the crap outta them
    overall im very happy with my purchase (white, 2.0GHz, 1 GB RAM)

    The truth is we all love our Macbooks. I am just frustrated with the unpredictable, undiagnosed problem of the random shutdowns (2 or 3 times a day) but when it is on it is the best thing that I have ever had as a computer. For example, I run Parallels and installed xp, two versions of Linux for fun. I even managed to get my old win 98 laptop saved as a 3 GB disk image that I imported to Paralles. It boots and runs just the same. It brings me back memories of old days when I run the old pc on my new mac and see all those old programs and files.
    I use Handbrake to rip all my favorite DVDs to Itunes. I miss it so much now that it is in the shop. Enjoy.....

  • What's this forum for ?

    any ideas as purpose ?

    It is for us to discuss creme brulee recipes.
    Personally, I think it all comes down to the crust.

  • IS THIS FORUM FOR????

    ORACLE DBA OR ORACLE DEVELOPER OR BOTH?
    THANKS

    97 percent people who do not even know how to use the standard database documentation, so they can be neither DBAs nor developers. In an ideal world that would be true, but in this one ignorance of the documentation is no barrier.
    Cheers, APC

  • How to attach a file in this forum for refrence

    Hi ,
    As part of  my earlier request in
    https://community.oracle.com/thread/3649392
    I would like to attach a sample  sbconfig.jar as reference to others to recreate my issues. I noticed , don't have permission to attach the file.
    Any help is appreciated?
    Thanks,
    Sathis.

    Hello Sathis,
    Were you able to figure out how to attach a file to a community thread?  I would like to do the same thing, but cannot find any attachment icon.
    Thank you, Kevin

  • This is my first post. I would like to thank you all for all of the information you have posted on this forum. It has been most helpful to a Newbee. I have a MBP17 w/trackpad and click bar from '08. I need a bigger HD, how big can I go? THX

    This is my first post, but I have been following this forum for a while and you have all been very helpful in my MacEducation. I have a MBP17 10.6.8 w/6GB ram from '08. I need to upgrade my HD from 200GB. I would like to go as big as I can and would appreciate any experiance you've had. Could I go 750GB or 500 GB @ 7200 rpm.  Should I upgrade to Lion before I swap the drive out?  Thanks, Johnny

    Hi Johnny,
    Yes you can do the 750 or 500, 5400 or 7200. Just make sure it is 2.5" SATA and 12.5mm high or less (there is at least one HD out there that is 15mm high and will not work).
    Lion: I don't know that it matters much either way, just don't do them at the same time. That way, if there are issues, you have a much better chance of troubleshooting one major change instead of two.

  • Please beware that this forum is for Adobe Connect users and not ConnectNow users

    These are two very different technologies built on different technology stacks. ConnectNow is a free offering.
    Support is limited for ConnectNow. Please use this forum for Adobe Connect issues as issues with ConenctNow would not be applicable here.

    Reposting to bring this back to the top.
    Any questions on topics other than Oracle Help technologies -- Oracle Help for Java and Oracle Help for the Web -- will not be seen by the appropriate people and will not be answered.
    For help with other Oracle products or technologies, please find the appropriate forum at:
    http://forums.oracle.com/forums/index.jsp
    -brian
    Oracle Help Team

Maybe you are looking for