A Sun X4450 shows only half of installed RAM in BIOS

In the Integrated Lightsout Manager I see all 8 x 2 GB Dimms but in the BIOS I only see 8 GB. I am very shure I populated the banks exactly.

The issue has been resolved. Turns out the RAM chips were from different manufactures. 6 from Micron and 2 from Samsung. All chips worked fine within brand but did not work well together, I assume from some timing differences. I had all Samsung installed and all 8 gigs now show up.

Similar Messages

Ipad2 show only half of the google Australia logo?

My ipad2 started to show only half of the google logo (top part is blank white).It's only happened in google Australia search.I reset and restore software,still the same problem.

It properly the nature of the chip-set back then it an old broad , the manual said can support lot of Ram up to 4 or 8 Gig. of memory but it hard to get or find those amount of RAM back then . Mine broad only see less than 2 Gig out of 4 but Windows 8.1 ..64 bit still install fine go figure.

Only half of install button visible in app store for two apps

Only for 2 apps that may have been removed accidentaly (by my son) the install button in the app store is only partly visible, grey, and does not respond to clicking.
Hard reset didn't help. Just before this happened i updated from ios5 to 6.
Please advise how to get these apps back.

I just figured out that it has everything to do with the restrictions that I had set up for my children. I had set it up for the apps to be for 9+ and the ones that had half an install button that was greyed out were for older. Hope that help!

Vuescan Preview Showing Only Half Screen On 2012 Mac Mini

Hi there,
I have a 2012 i7 2.3Ghz quadcore Mac Mini fitted with an Areca Thunderbolt 12TB RAID and running 10.8.2, and using the latest version of Vuescan, am getting only half the screen when going onto Preview from our Minolta Dimage Scan Multi Pro scanner, which is connected via a Firewire 800 to 400 cable.
One would think it is a problem of the software or OS but no......when running it on a mid-2010 2.4Ghz i5 Macbook Pro on SL 10.6.8 and on another 2011 Mac Mini we have (also running 10.8.2), the Vuescan runs perfectly and previews normally. So I am wondering.......what is the cause of the problem? Could it be to do with the Firewire port, interference from the Thunderbolt port, or simply that we have a defective motherboard? Would appreciate any help or suggestions, thanks.

HI AngusParker,
Just wanted to say thanks.....your tip definitely helped me solve this problem!
It was indeed the screen calibration that was the main issue...once that was done the screen went back to normal.
cheers!

Satellite Pro A200 - Shows only 3GB instead 4GB RAM

Hi,
2 years ago I got a Satellite Pro A200 as a business notebook and it runs with XP SP2, later with SP3. With 2 GB it shows 2 GB of memory in Windows - and I know it has a Radeon 7500 with 256MB of individual graphic memory, and it has no shared memory.
I upgraded it to 4 GB, but Windows shows exactly 3 GB. BIOS shows 4 GB and the ATI system monitor shows 4 GB. I know that 4 GB is not possible in XP 32 bit, only on Windows 2003 R2 32 bit or Vista - but on desktop systems I have seen values between 3.3 and 3.7 GB.
So where is the memory? It looks like a bug - the memory chips have both 2 GB I have verified this. Because it is a company notebook I can't just upgrade to XP 64 bit :-(
In the BIOS are no options - first I thought it's the graphic card, but mine has independant graphics with own memory so the computer comes up with 2048 MB or 4096 after the upgrade.
Shared memory would show about 1900 MB of RAM to the OS like my private EEEpc.

> I upgraded it to 4 GB, but Windows shows exactly 3 GB. BIOS shows 4 GB and the ATI system monitor shows 4 GB. I know that 4 GB is not possible in XP 32 bit, only on Windows 2003 R2 32 bit or Vista - but on desktop systems I have seen values between 3.3 and 3.7 GB.
First of all 32bit OS (no matter if its XP, Win 2003 R2, Vista or Win 7) will not recognize 4GB RAM but only 3.2GB (and not 3.7GB)
I have no idea where you looked for available RAM but you should run DXDIAG in RUN.
Then you should get some details and also the available RAM.
Secondly the graphic card supports Local cache (256MB) and HyperMemory.
HyperMemory of the graphic card depends on the available main RAM memory.
For example the unit supports 1024MB RAM (1GB) then the hyper memory would be 256MB this part of RAM would be shared with graphic card!
This is the reason why the only 3GB are shown...
PS: regarding such comments and a tip:
> hey man please think before you answer.
This is a community and all people here try to help each other so be always thankful for all kind of answers

Imported wmv file now shows only half the image

Hi
I have a standard animation I use at the begining of all my Trailers and DVD. This plays ok on the PC, but today when I imported it to a new project the animation only shows the bottom half of the image rather then the whole image. It seems to be the top half when plaid in the monitor. The sequence is the same size as the animation. Even if not, the animation shows like this in the source monitor before imported into a sequence. Can anyone help? Thanks

It appears that Microsoft has issued the fixed update:
https://technet.microsoft.com/en-us/security/bulletin/ms13-057
See the "Update FAQ" section:
"Why was this bulletin revised on August 13, 2013?
Microsoft revised this bulletin to rerelease the 2803821 update for Windows 7 and Windows Server 2008 R2.
The rereleased update addresses an application compatibility issue in which WMV encoded video could fail to properly render during playback. Windows 7 and Windows Server 2008 R2 customers should install the rereleased update."

Solaris 10 - top command show only half memory

I have 64Gb of RAM but top Solaris only use 32Gb
Output from "prtdiag" command:
==== Memory Device Sockets ================================
Type    Status Set Device Locator      Bank Locator
Unknown in use 1   DIMM 1A
Unknown in use 3   DIMM 2C
Unknown in use 5   DIMM 3E
Unknown in use 7   DIMM 4G
Unknown in use 1   DIMM 5A
Unknown in use 3   DIMM 6C
Unknown in use 5   DIMM 7E
Unknown in use 7   DIMM 8G
Unknown in use 2   DIMM 9B
Unknown in use 4   DIMM 10D
Unknown in use 6   DIMM 11F
Unknown in use 8   DIMM 12H
Unknown in use 2   DIMM 13B
Unknown in use 4   DIMM 14D
Unknown in use 6   DIMM 15F
Unknown in use 8   DIMM 16H
Output from "hpasmcli" command:
DIMM Configuration
Board Dimm   Is      Form   Memory Memory Memory
Number Number Present Factor Type    Size    Speed   Status
     0      1     Yes 0x00f 0x014 4096MB 667MHz Ok
     0      2     Yes 0x00f 0x014 4096MB 667MHz Ok
     0      3     Yes 0x00f 0x014 4096MB 667MHz Ok
     0      4     Yes 0x00f 0x014 4096MB 667MHz Ok
     0      5     Yes 0x00f 0x014 4096MB 667MHz Ok
     0      6     Yes 0x00f 0x014 4096MB 667MHz Ok
     0      7     Yes 0x00f 0x014 4096MB 667MHz Ok
     0      8     Yes 0x00f 0x014 4096MB 667MHz Ok
     0      9     Yes 0x00f 0x014 4096MB 667MHz Ok
     0     10     Yes 0x00f 0x014 4096MB 667MHz Ok
     0     11     Yes 0x00f 0x014 4096MB 667MHz Ok
     0     12     Yes 0x00f 0x014 4096MB 667MHz Ok
     0     13     Yes 0x00f 0x014 4096MB 667MHz Ok
     0     14     Yes 0x00f 0x014 4096MB 667MHz Ok
     0     15     Yes 0x00f 0x014 4096MB 667MHz Ok
     0     16     Yes 0x00f 0x014 4096MB 667MHz Ok
Total Memory: 65536 MB
:/> top
last pid: 27427; load avg: 0.21, 0.30, 0.28;       up 106+11:48:10                                                                                                                      15:47:39
147 processes: 145 sleeping, 1 zombie, 1 on cpu
CPU states: 99.5% idle, 0.1% user, 0.4% kernel, 0.0% iowait, 0.0% swap
Memory: 32G phys mem, 14G free mem, 102G total swap, 102G free swap
:/> top -v
top: version 3.6.1
:/> echo ::memstat | mdb -k
Page Summary                Pages                MB %Tot
Kernel                     631483              2466    8%
Anon                      3233838             12632   39%
Exec and libs               31475               122    0%
Page cache                 690598              2697    8%
Free (cachelist)          2873644             11225   34%
Free (freelist)            924686              3612   11%
Total                     8385724             32756
Physical                  8176848             31940
                       Solaris 10 10/08 s10x_u6wos_07b X86
           Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
                        Use is subject to license terms.
                            Assembled 27 October 2008

I ran top on a system running Solaris 10 10/09 and the top results match prtconf's memory results.
See below.
load averages: 4.63, 4.77, 4.80 08:41:19
2188 processes:2099 sleeping, 11 zombie, 73 stopped, 5 on cpu
CPU states:     % idle,     % user,     % kernel,     % iowait,     % swap
Memory: 96G real, 51G free, 36G swap in use, 91G swap free
% prtconf -v | grep Mem
Memory size: 98304 Megabytes
% top -v
top: version 3.5beta9
% cat /etc/release
                      Solaris 10 10/09 s10s_u8wos_08a SPARC
           Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
                        Use is subject to license terms.
                           Assembled 16 September 2009
I ran top version 3.8beta1 on a Solaris 11 system and it matches phys memory size as well.
Confirm that you don't have a /etc/system setting that is constraining phys memory and that
prtconf is reporting total amount as well.
Thanks, Cindy

Cannot uninstall T-bird 24.4.0 from Win 7...shows only 48.1mb installed. I want to reload NEW T-bird.

Was working fine, but FireFox was having trouble. I went back to Internet Explorer and all was OK until I
reloaded T-bird, because I was having trouble downloading Pandora. I had to load Pandora thru a Google search. Then I lost my T-bird, so I un-installed FireFox and then T-bird. FireFox is gone and I tried d/l of
T-bird (3 times). I then saw that my original T-bird was only 48.1 mb, so I tried to uninstall it. All that happens is a quick nothing! How can I get that old chewed 24.4.0 off, so I can reload a fresh version?
Thanks!

I have no idea what you're talking about. Try again.
https://support.mozilla.org/en-US/kb/ask-tb#w_how-to-ask-your-question

P55-GD65 registers only half of memory (now won't even boot)

Hi
i have big problem with deployment of new system. Specs :
MSI P55-GD65
Patriot Sector 5 PGV34G1600ELK 2X2GB
Intel i7 860
CHIEFTEC 500W
NV 7900 gs (connected for diagnostic reasons)
First, BIOS recognized only half amount of RAM (2gb from 4gb)
-updated BIOS to 1.5 - nothing changed
-cleared CMOS and restored defaults - nothing changed
Second, i tried to instal win7/win2008r2 - freezes after installation booting progress bar disappears (tried to boot from USB key and from network deployment server)
Then, i tried to install win2003 - success! but system works unstable (eg once frozen at cinebench multicore test, once BSOD while booting etc)
CPU-Z recognized properly amount of installed RAM (and said that dual channel is disabled), but system still says that is only 2 gigs of ram.
Then, i found on this board that CPU bented pins could cause the problem, so i checked pins, and they seems to look fine (Hi res photo of pins)
After i mounted CPU back, the system event won't boot - all six CPU phase diods on main board are active, fans turns on, but boot process won't start.
Anyone know is there any way to fix it? (before i give back everything to vendor)

i just bought my MSI P55-GD80 yesterday. i just hope i wont be getting the same issue as some other guys do.
im planning on building my new rig tomorrow because i dont have my memory cards and video card yet(might get these items tomorrow).
so yeah, i will be checking the CPU seating. will try to seat it once then remove it for the pin contacts checking. and i hope too that the mobo i got has at least the 1.4 BIOS version, because to tell the truth i never done any BIOS flashing before(actually ive done it once with my XPS 630i rig and it went easy for me to do. i dont know whats the procedure for the MSI boards so no idea at all). and to tell the truth, this is my first time building my own rig so im a bit excited and i prioritize durability(long lasting) and always hoping not to get any problem building my very own rig for the first time.
**so here is my question :
how will i know if the CPU pad doesnt have a good contact with the socket pins?
what should i do if after checking i find out that my CPU pad doesnt have a good contact with the socket pins?
what if after checking i find out my CPU doesnt have good contact with the socket pins but with my GD80 reading 4gb of my memory cards?
if you wanna know where i got my board, i bought it here in japan from a known computer parts retailer. and yes im living here for now and its really hard for me to return my product if its faulty because, first im not that good at speaking japanese language, and second they might have different procedure for returning products that i might not know.
thanks in advance, will appreciate any help and reply,
Skaahr
***edited : i just checked the sticker from my mobo which i read from the other topic that tells it shows the BIOS version in your mobo, the tiny green sticker shows me this " IMS140 " does it means i have the 1.4 BIOS version?

Why is only half the page printing

i have a Deskjet f380 when i want to print a page, the preview shows only half the page. and it will only print half the page. i checked the setting and they seem to be fine, what gives?

Suddenly my HP J5780 printer releases pages that gradually lose printing -- top of the page OK, middle weak, no bottom. What to do?

Saving report in Report Builder 10.1.2. saves only half of file

Hi,
I have problems with saving files in Report Builder 10.1.2. After saving a rdf-file it shows only half the size of the original file.
When closing the report in Builder and opening it again it won't open. Also the temp-file is half the size of the original rdf-file during saving.
Can someone help me to solve this? Auto-save in Preferences is turned off. Have tried to open and save files on the network and on the local pc.

Hi,
Did you used OUTER join?? if you have any suitable Outer join according to my understanding query should return Assignment data but with NULL value, then you can replace as you need it in Reports.
Regards,
Syed

After Effects CS6 (11.0.4.2) Not Recognizing Installed RAM Windows 7 64-Bit (Home Premium)

I'm having the same issue in Photoshop CS6 (13.0.1 x64).
I had been running my system on 16GB of RAM and recently upgraded to 32GB. My system diagnostics show 32GB of RAM actively installed and running, but when I open the system preferences in either PS or AE it shows only 16-ish available RAM. Why don't I have access to all 32GB (or close to it)?
I'm including screen shots of the Preferences Windows in both PS and AE. Any help would be much appreciated. Both applications are currently updated as of this morning.

I have answered my own question. And as embarrassing as it is. I'll leave it up in case someone else is looking for the same answer.
Windows 7 Home Premium only supports up to 16 GB of RAM. I had to buy the Professional version in order to access all 32 GB of the installed RAM.
It's a pretty silly mistake to make, but there you have it.

I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. How do I fix this?

I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to start completely over and delete the content in my new library to prevent duplicates or is there a way to continue the process?

I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to start completely over and delete the content in my new library to prevent duplicates or is there a way to continue the process?

When I click on apps in Creative Cloud (via taskbar icon) it shows only Photoshop CC as installed and Lightroom as something to be installed! I already have LR 5.7 installed and this has been updated through CC. I dont understand why it's now showing as

When I click on apps in Creative Cloud (via taskbar icon) it shows only Photoshop CC as installed and Lightroom as something to be installed! I already have LR 5.7 installed and this has been updated through CC. I dont understand why it's now showing as it needs to be installed!?!? It wasn't like this the last time I looked.

Hi,
Please refer to the help document:
Apps panel doesn't show installed Creative Cloud apps
Regards,
Sheena

When i press the on/off my ipod show me the lock screen only half second and goes black.

When i press the on/off my ipod show me the lock screen only half second and goes black.
I try again and works normally. Sometimes do that.
What Happens?

Try the standard fixes:
- Reset. Nothing will belost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

A Sun X4450 shows only half of installed RAM in BIOS

Similar Messages

Maybe you are looking for