A swf showing a trace on the next page
Hello,
I've got a problem with a SWF which shows a ghost in the next page.
When i'm reading a PDF document, if i've got a SWF on a page, when i go on the next page, i've got a square (trace) showing the place where was the swf on the previous page.
I tried to export with differents scales, with ou without fullscreen, etc…
As you can see, there are words (moving from the left to the right and the right to the left) on the right of the left image, on the next page (on the right), i've got a trace (blue square).
Thanks a lot.
Make sure you set the properties of the SWF annotation to disable "when page is closed". It's a known problem that some parts of rich media annotations can persist in the display buffer unless the Flash Player instance is explicitly told to unload itself.
Similar Messages
-
How to split table in the report so it shows on the next page?
Hi,
How to split table in the report so it shows on the next page? Im trying to fit long (many columns) table into my report page. It is too long however. I want it to wrap and show the rest on the next page. What I get now is table cut at the page end and rest is not visible.Yes, this might be that the amount of data will cause table to grow and exceed 1, 2, 3.. pages. In that case I would probably want to have, lets say , one half of columns on 1st page then the other on the 2nd page and then repeatedly the same sequence down across all pages. Is there a way to achieve this?
-
My i-tunes Wish List only shows the first page- it used to show all the pages. Its a little like the next page button is disconnected?
Any ideas?
thanks
SimonI would say all types. Any kind of document/ file that has multiple pages, I can't get to the next page.
-
On Facebook I'm able to delete 1 of the duplicate posts.
On Ebay after I click "buy now" & go to the next page I find I have 2 of the same item to pay for separately.
This happens about 50% of the time.I believe that insufficient RAM may be the source of some of your problems. If you have a RAM of somewhere 4 to 8GB, you will experience smoother computing. 3GB doesn't seem right, so you might want to learn more by going to this site:
http://www.crucial.com/store/drammemory.aspx
I don't know what know what's happening with your optical drive, but it seems you use your drive quite a bit. In that case, look into a lens cleaner for your machine. It's inexpensive, works quite well.
I hope you'll post here with your results! -
I've upgraded to LION. It looks like LION eliminates the finger gestures within internet browsing that used to yield navigating to the previous page or navigating to the next page. I think it was a 3 finger swipe to the left and a 3 finger swipe to the right. It looks like this has been eliminated. I've gone into the system preferences and went through all the new settings for the track pad finger gestures. I've not found a combination that allows me to swipe on the track pad to do the page forward / page back function.
How to I get this back? I was my favorite one and now I can't get there!For going back to the previous page try a 2-finger gesture. Two fingers in the other direction will take you back.
cornelius -
Web CrystalReportViewer error when trying to go to the next page or search
Recently I've updated my solution to CrystalReports for VS2010 (now I have 13.0.2000.0 version along with .NET 4.0 and C#). When I used CrystalReports 10.5.3700.0 CrystalReportViewer was situated inside an UpdatePanel and controlled with my own toolbar and everything worked fine. After an update this stuff refused to work at all (CrystalReportViewer was simply blank) and I according to advices on this board removed all UpdatePanels and ScriptManager from my page and began to use native CrystalReportViewer toolbar. Now first page of the report is rendering properly and Print and Export buttons of the native toolbar are working fine but when i'm trying to go to the next page of a report, I see only word "Error" in the report's area.
Fiddler log for this request:
POST http://127.0.0.1:56507/reportview.aspx?report=forms_graph&from_d=01.12.2007+00%3a00%3a00&to_d=22.03.2010+23%3a59%3a59&s%5b%5d=74%2c95%2c112%2c97%2c139%2c96%2c125%2c113%2c98%2c128%2c144%2c90%2c141%2c80%2c75%2c118%2c109%2c71%2c72%2c94%2c73%2c3%2c2%2c81%2c133%2c82%2c117%2c140%2c127%2c137%2c131%2c143%2c116%2c129%2c111%2c87%2c88%2c120%2c110%2c124%2c145%2c146%2c134%2c135%2c138%2c108%2c101%2c136%2c142%2c76%2c6%2c47%2c10%2c4%2c53%2c102%2c91%2c11%2c99%2c50%2c114%2c132%2c115 HTTP/1.1
Host: 127.0.0.1:56507
Connection: keep-alive
Referer: http://ipv4.fiddler:56507/reportview.aspx?report=forms_graph&from_d=01.12.2007+00%3A00%3A00&to_d=22.03.2010+23%3A59%3A59&s%5B%5D=74%2C95%2C112%2C97%2C139%2C96%2C125%2C113%2C98%2C128%2C144%2C90%2C141%2C80%2C75%2C118%2C109%2C71%2C72%2C94%2C73%2C3%2C2%2C81%2C133%2C82%2C117%2C140%2C127%2C137%2C131%2C143%2C116%2C129%2C111%2C87%2C88%2C120%2C110%2C124%2C145%2C146%2C134%2C135%2C138%2C108%2C101%2C136%2C142%2C76%2C6%2C47%2C10%2C4%2C53%2C102%2C91%2C11%2C99%2C50%2C114%2C132%2C115
__EVENTTARGET=StatReportViewer
__EVENTARGUMENT={"0":{"rptViewLabel":"u0413u043Bu0430u0432u043Du044Bu0439 u043Eu0442u0447u0435u0442", "gpTreeCurrentExpandedPaths":{}, "vCtxt":"/wEXAwUVSXNMYXN0UGFnZU51bWJlcktub3duaAUOTGFzdFBhZ2VOdW1iZXICAQUKUGFnZU51bWJlcgIB", "pageNum":1}, "common":{"width":"350px", "Height":"", "enableDrillDown":false, "drillDownTarget":"_self", "printMode":"Pdf", "displayToolbar":true, "pageToTreeRatio":6, "pdfOCP":true, "promptingType":"html", "viewerState":"...(HUGE VIEWSTATE STUFF)...", "rptAlbumOrder":["0"], "toolPanelType":"None", "toolPanelWidth":200, "toolPanelWidthUnit":"px", "iactParams":[], "paramOpts":{"numberFormat":{"groupSeperator":" ", "decimalSeperator":","}, "dateFormat":"dd.MM.yyyy", "timeFormat":"H:mm:ss", "dateTimeFormat":"dd.MM.yyyy H:mm:ss", "booleanFormat":{"true":"u0438u0441u0442u0438u043Du0430", "false":"u043Bu043Eu0436u044C"}, "maxNumParameterDefaultValues":"200", "canOpenAdvancedDialog":true}, "zoom":100, "zoomFromUI":false, "lastRefresh":"01.09.2011 15:14:03"}, "curViewId":"0"}
__VIEWSTATE=/wEPDwUKMTY3NzU4MzI2OQ9kFgICAw9kFgICEw8XAGQYAQUeX19Db250cm9sc1JlcXVpcmVQb3N0QmFja0tleV9fFgIFEUxvZ2luU3RhdHVzJGN0bDAxBRFMb2dpblN0YXR1cyRjdGwwMw==
StatReportViewer_toptoolbar_search_textField=Find...
text_StatReportViewer_toptoolbar_selectPg=1 of 1+
text_StatReportViewer_toptoolbar_zoom=100%
On a reloaded page I see just a text "Error" in CrystalReportViewer area and the following stack trace in html markup:
Inner Stack Trace:
at CrystalDecisions.Shared.Json.JsonArray..ctor(JsonTokener x)
at CrystalDecisions.Shared.Json.JsonTokener.NextValue()
at CrystalDecisions.Shared.Json.JsonObject..ctor(JsonTokener x)
Stack Trace:
at CrystalDecisions.Shared.Json.JsonObject..ctor(JsonTokener x)
at CrystalDecisions.Shared.Json.JsonTokener.NextValue()
at CrystalDecisions.Shared.Json.JsonArray..ctor(JsonTokener x)
at CrystalDecisions.Shared.Json.JsonArray..ctor(String string_Renamed)
at CrystalDecisions.Web.ReportAgentBase.LoadViewState(Object viewState, Boolean bRptSourceChangedByNavigation)
at CrystalDecisions.Web.ReportAgent.LoadViewState(Object viewState, Boolean bRptSourceChangedByNavigation)
at CrystalDecisions.Web.CrystalReportViewerBase.LoadViewState(Object viewState)
at CrystalDecisions.Web.CrystalReportViewer.LoadViewState(Object viewState)
I don't know what additional information about this issue will be helpful. Any kind of help will be highly appreciated.Tried with attached allinone.js with out any luck.
It seems that the GetLayer function returns null for the Crystal reports viewer Id
below are fields values in function Widget_init()
A.id= "RptViewer_BeamRptViewer__UI"
this
id: "RptViewer_BeamRptViewer__UI"
layer: null
css: null
getHTML: function(){var B=bobj.html;var C={overflow:"hidden",position:"relative",left:this.visualStyle.left,top:this.visualStyle.top};var A=B.DIV({dir:"ltr",id:this.id,style:C,"class":"dialogzone"},this._topToolbar?this._topToolbar.getHTML():"",this._separator?this
beginHTML: function Widget_getHTML(){return""}
endHTML: function Widget_getHTML(){return""}
write: function Widget_write(A){_curDoc.write(this.getHTML(A))}
begin: function Widget_begin(){_curDoc.write(this.beginHTML())}
end: function Widget_end(){_curDoc.write(this.endHTML())}
init: function(){this.initOld();this._initSignals();if(this._reportAlbum){this._reportAlbum.init()}if(this._topToolbar){this._topToolbar.init()}if(this._leftPanel){this._leftPanel.init()}if(this._statusbar){this._statusbar.init()}if(this._leftPanelResizeGrabber)
move: function Widget_move(A,C){var B=this.css;if(A!=null){if(_moz){B.left=""+A+"px"}else{B.pixelLeft=A}}if(C!=null){if(_moz){B.top=""+C+"px"}else{B.pixelTop=C}}}
resize: function(A,B){if(bobj.isNumber(A)){A=A+"px"}if(bobj.isNumber(B)){B=B+"px"}this.visualStyle.width=A;this.visualStyle.height=B;this._doLayout()}
setBgColor: function Widget_setBgColor(A){this.css.backgroundColor=A}
show: function Widget_show(A){this.css.visibility=A?_show:_hide}
getWidth: function Widget_getWidth(){return this.layer.offsetWidth}
getHeight: function Widget_getHeight(){return this.layer.offsetHeight}
setHTML: function Widget_setHTML(A){var B=this;if(B.layer){B.layer.innerHTML=A}else{B.initialHTML=A}}
setDisabled: function Widget_setDisabled(A){if(this.layer){this.layer.disabled=A}}
focus: function Widget_focus(){safeSetFocus(this.layer)}
setDisplay: function Widget_setDisplay(A){if(this.css){this.css.display=A?"":"none"}}
isDisplayed: function Widget_isDisplayed(){if(this.css.display=="none"){return false}else{return true}}
appendHTML: function Widget_appendHTML(){append(_curDoc.body,this.getHTML())}
setTooltip: function Widget_setTooltip(A){this.layer.title=A}
initialized: function Widget_initialized(){return this.layer!=null}
widx: 64
isDisplayModalBG: false
isLoadContentOnInit: false
layoutType: "fitReport"
visualStyle: {...}
widgetType: "Viewer"
_topToolbar: {...}
_reportAlbum: {...}
_leftPanel: {...}
_separator: {...}
_print: {...}
_export: {...}
_promptDlg: null
_reportProcessing: {...}
_eventListeners: []
_statusbar: {...}
_leftPanelResizeGrabber: {...}
initOld: function Widget_init(){var A=this;A.layer=getLayer(A.id);A.css=A.layer.style;A.layer._widget=A.widx;if(A.initialHTML){A.setHTML(A.initialHTML)}}
_boundaryControl: {...}
_modalBackground: {...}
LayoutTypes: {...}
PromptingTypes: {...}
onGrabberMove: function(A){if(this._leftPanel){this._leftPanel.resize(A,null);this._doLayout()}}
keepFocus: function(){var A=bobj.crv.params.FlexParameterBridge.getSWF(this.id);if(A){A.focus()}}
addChild: function(A){if(A.widgetType=="ReportAlbum"){this._reportAlbum=A}else{if(A.widgetType=="Toolbar"){this._topToolbar=A;this._separator=bobj.crv.newSeparator()}else{if(A.widgetType=="Statusbar"){this._statusbar=A}else{if(A.widgetType=="PrintUI"){this._print=A}
_onWindowResize: function(){if(this._currWinSize.w!=winWidth()||this._currWinSize.h!=winHeight()){this._doLayout();this._currWinSize.w=winWidth();this._currWinSize.h=winHeight()}}
_initSignals: function(){var B=MochiKit.Base.partial;var D=MochiKit.Signal.signal;var A=MochiKit.Signal.connect;var C=MochiKit.Iter.forEach;if(this._topToolbar){C(["zoom","drillUp","firstPage","prevPage","nextPage","lastPage","selectPage","refresh","search","export","pr
getLeftPanel: function(){return this._leftPanel}
_initLeftPanelSignals: function(){var B=MochiKit.Base.partial;var D=MochiKit.Signal.signal;var A=MochiKit.Signal.connect;var C=MochiKit.Iter.forEach;if(this._leftPanel){C(["grpDrilldown","grpNodeRetrieveChildren","grpNodeCollapse","grpNodeExpand","resetParamPanel","resizeToolPan
_isMainReportViewSelected: function(){var A=this._reportAlbum.getSelectedView();return A&&A.isMainReport()}
_doLayoutOnLoad: function(){this.css.visibility=this._oldCssVisibility;this._doLayout()}
_doLayout: function(){var H=this._topToolbar?this._topToolbar.getHeight():0;var D=this._topToolbar?this._topToolbar.getWidth():0;var K=this._separator?this._separator.getHeight():0;var M=this._statusbar?this._statusbar.getHeight():0;var R=this._leftPanel?this._leftPa
_onSwitchPanel: function(A){var B=bobj.crv.ToolPanelType;if(B.GroupTree==A){MochiKit.Signal.signal(this,"showGroupTree")}else{if(B.ParameterPanel==A){MochiKit.Signal.signal(this,"showParamPanel")}else{if(B.None==A){MochiKit.Signal.signal(this,"hideToolPanel")}}}this._left
setPageNumber: function(B,A){if(this._topToolbar){this._topToolbar.setPageNumber(B,A)}}
showPromptDialog: function(B,A){if(!this._promptDlg){var C=MochiKit.Base.bind(this._onShowPromptDialog,this);var D=MochiKit.Base.bind(this._onHidePromptDialog,this);this._promptDlg=bobj.crv.params.newParameterDialog({id:this.id+"_promptDlg",showCB:C,hideCB:D})}this._promptD
updatePromptDialog: function(A){A=A||"";var B=function(C,D){return function(){C.updateHtmlAndDisplay(D)}};bobj.loadJSResourceAndExecCallBack(bobj.crv.config.resources.HTMLPromptingSDK,B(this._promptDlg,A));if(bobj.isParentWindowTestRunner()){setTimeout(MochiKit.Base.partial(M
showFlexPromptDialog: function(G,M){var B=bobj.crv.params.FlexParameterBridge;var C=bobj.crv.params.ViewerFlexParameterAdapter;if(!B.checkFlashPlayer()){var E=L_bobj_crv_FlashRequired;this.showError(E.substr(0,E.indexOf("{0}")),B.getInstallHTML());return }C.setViewerLayoutType(
sendPromptingAsyncRequest: function(A){MochiKit.Signal.signal(this,"crprompt_asyncrequest",A)}
setDisplayModalBackground: function(A){A=this.isDisplayModalBG||A;if(this._modalBackground){this._modalBackground.show(A)}}
_onShowPromptDialog: function(){this._adjustWindowScrollBars();this.setDisplayModalBackground(true)}
_onHidePromptDialog: function(){this._adjustWindowScrollBars();document.onkeypress=this._originalDocumentOnKeyPress;this.setDisplayModalBackground(false)}
isPromptDialogVisible: function(){return this._promptDlg&&this._promptDlg.isVisible&&this._promptDlg.isVisible()}
hidePromptDialog: function(){if(this.isPromptDialogVisible()){this._promptDlg.show(false)}}
hideFlexPromptDialog: function(){if(this._promptDlg){if(_ie){this._promptDlg.focus()}this._promptDlg.style.visibility="hidden";this._promptDlg.style.display="none";this.setDisplayModalBackground(false);if(this._promptDlg.closeCB){this._promptDlg.closeCB()}}}
_adjustWindowScrollBars: function(){if(_ie&&this.layoutType==bobj.crv.Viewer.LayoutTypes.CLIENT&&this._promptDlg&&this._promptDlg.layer&&MochiKit.DOM.currentDocument().body){var E,B;var A=MochiKit.DOM.currentDocument().body;var D=this._promptDlg.layer;if(this.getReportPage()&&this
showError: function(C,A){var B=bobj.crv.ErrorDialog.getInstance();B.setText(C,A);B.setTitle(L_bobj_crv_Error);B.show(true)}
update: function(C){if(!C||C.cons!="bobj.crv.newViewer"){return }if(C.args){this.isDisplayModalBG=C.args.isDisplayModalBG}this.hidePromptDialog();for(var A in C.children){var B=C.children[A];if(B){switch(B.cons){case"bobj.crv.newReportAlbum":if(this._reportAlbum){
getToolPanel: function(){if(this._leftPanel){return this._leftPanel.getToolPanel()}return null}
getParameterPanel: function(){var A=this.getToolPanel();if(A){return A.getParameterPanel()}return null}
getReportPage: function(){if(this._reportAlbum){var A=this._reportAlbum.getSelectedView();if(A){return A.reportPage}}return null}
scrollToHighlighted: function(){if(!this._reportAlbum){return }var A=this._reportAlbum.getSelectedView();if(A){A.scrollToHighlighted(this.layoutType.toLowerCase()==bobj.crv.Viewer.LayoutTypes.FITREPORT)}}
addViewerEventListener: function(C,B){var A=this._eventListeners[C];if(!A){this._eventListeners[C]=[B];return }A[A.length]=B}
removeViewerEventListener: function(E,B){var A=this._eventListeners[E];if(A){for(var D=0,C=A.length;D<C;D++){if(A[D]==B){A.splice(D,1);return }}}}
getEventListeners: function(A){return this._eventListeners[A]} -
Lately, when I log on to my yahoo mail while using firefox, it no longer shows the DELETE option at the top of the email page. So, I cannot delete any emails that I might wish to delete. Also, I cannot get past the first page of my emails. Every time I click on the NEXT PAGE button, it does not move from page 1. This does not happen when I log onto yahoo mail using Internet Explorer. Please advise as to what I can do to correct this. Could it be that I'm not using the latest version of Firefox? I don't know...
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
Can I set up a hyperlink to the next page of a series?
Hello,
Here's a question for the braintrust here......
I was trying to build a gallery of images that I can change
over and over. I wanted to know if it was possible to set up a
generic hyperlink in a template file that, when clicked, simply
goes to the next page found within a given directory (the directory
would contain pages with file names like 01.htm, 02.htm, etc). I
wanted to set up the link in a template file so that it just reads
"next." This way, the template file would contain generic
navigation, but when you click on the "next" link within a page, it
would understand what page you are on (say page 07.htm) and would
then go to the next page in the directory (say page 08.htm or
12.htm, whichever is next in numerical / alphabetical order). Is
this possible, and am I making sense?
Thanks for any help you all can offer, and I am more than
willing to explain more if need be.
JakeGot the script finished. You need to ensure that each page
uses a three
digit page number like this 002.htm, and it would pay to
create a page at
000.htm and one that is one higher than the highest page with
an image.
<script language="JavaScript">
//shows your URL
var str = document.URL; //reads in the full url
var n = 7;
var q = 3;
var iLen = String(str).length;
var ThisURL = String(str).substring(iLen, iLen - n);
var ThisPage = String(ThisURL).substring(0,q);
var ThisNumber = ThisPage - 0; //This will case the string
as a number
document.write("<br>" + ThisPage);
document.write("<p>");
var PrevPage = ThisNumber - 1;
var NextPage = ThisNumber + 1;
// Now we need to change the numbers to include the leading
Zeros
if (PrevPage < 100) {
if (PrevPage < 10) {
var PrevPageDigit = "00";
}else{
var PrevPageDigit = "0";
document.write("<a href = '" + PrevPageDigit + PrevPage +
".htm'>Previous</a>");
}else{
document.write("<a href = '" + PrevPage +
".htm'>Previous</a>");
if (NextPage < 100) {
if (NextPage < 10) {
var NextPageDigit = "00";
}else{
var NextPageDigit = "0";
document.write("<a href = '" + NextPageDigit + NextPage +
".htm'>Next</a>");
}else{
document.write("<a href = '" + NextPage +
".htm'>Next</a>");
</script>
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"Paul Whitham AdobeCommunityExpert"
<[email protected]> wrote in message
news:[email protected]...
> Anything is possible. Because you can not be sure that a
visitor will come
> into the first page in the gallery. Because you are
using .htm pages you
> will need to use a javascript. I am playing around with
a script at
> present. Email me off line and I will send it to you.
>
>
>
> --
> Paul Whitham
> Certified Dreamweaver MX2004 Professional
> Adobe Community Expert - Dreamweaver
>
> Valleybiz Internet Design
> www.valleybiz.net
>
> "jakeryan90" <[email protected]> wrote
in message
> news:[email protected]...
>> Hello,
>> Here's a question for the braintrust here......
>> I was trying to build a gallery of images that I can
change over and
>> over. I
>> wanted to know if it was possible to set up a
generic hyperlink in a
>> template
>> file that, when clicked, simply goes to the next
page found within a
>> given
>> directory (the directory would contain pages with
file names like 01.htm,
>> 02.htm, etc). I wanted to set up the link in a
template file so that it
>> just
>> reads "next." This way, the template file would
contain generic
>> navigation, but
>> when you click on the "next" link within a page, it
would understand what
>> page
>> you are on (say page 07.htm) and would then go to
the next page in the
>> directory (say page 08.htm or 12.htm, whichever is
next in numerical /
>> alphabetical order). Is this possible, and am I
making sense?
>> Thanks for any help you all can offer, and I am more
than willing to
>> explain
>> more if need be.
>> Jake
>>
>
> -
Pages '09 v4.1
Problem 1:
I am working with a 2-column Page document. Its my goal to have three items listed in a header in particular positions. Far left shows the paragraph number the page starts with, in the center is a title of the contents of the page, and on the far left is the last paragraph number to appear. To place these three items in the desired positions requires the insertion of a lot of spacing on both sides of the 'centered' title along with counting the characters of the title to find its center to alighn with the center of the page. 253 pages of this to will qualify me to be labled with a severe case of Obsessive Compulsive Disorder. I don't want OCD.
However, by installing a one row/3 column table in the header my task was made a lot easier in alighnments. But, another problem reared up. Within the header underneath the table is a vertical space remaining. This vertical 'tallness' is equivalent to the font size of 10. Its taking up too much space between the header and the text. It needs to be reduced or eliminated.
On the left-hand page I am able to reduce the font as far down as '1'. I've settled on using '3'. However, on the right-hand page the font will not accept any size selections be they less or more and remains stubbornly at font 10. Within a Header that does not have a table, I am able to change the font of both left and right pages.
Is there a another way to approach what I desire for the header other than installing a table in it? Is there a way to alter the font on the right hand pages?
Problem 2:
Whenever I create a table following text already on a page all is right until the table's growth in construction laps over to the next page. At that point the first row snaps to the top of the following page leaving an undesired area (space) between the last line of the text on the preceding page. Whenever I attempt to drag the table to the desired position it snaps back. This only happens when the table is larger than the remaining area of the page. If the table is started at the top of an unused page and runs beyond the confines of that page than it continues as expected onto the next page duplicating the table header. But to do this it must begin at the top of an unused page. Is there a means to have a table placed in the remaining space of a page and what does not fit continues to the next page in effect having a partial of the table on each page?
So there you have it. Christmas is over and its back to work. Thank-you for your attention.Regards re-positioning a table:
I went to Inspector>Wrap>Object Placement/Inline (moves with text) and found that the inline option was selected. Some of the rows within the table have two lines of text. Again, I dragged the table to the desired position on a page that is partially composed with text and got the same results as before - the table snapping back to the top of the following page where it initially resided. In this current position the 2-page table does break as it should on the following 3rd page. Below is a schematic of the appearance of the 2-pages involved.
Page 1 left side.
TEXT 1-line as 1-column
TABLE (5-rows)
TEXT (2-columns) 14-lines left column and 13-lines right column.
[Layout Break] otherwise the above textual columns would be all on the left side of the page.
TEXT 1-line as 1-column
* The desired insertion point for a two page table on a page that is 40% filled with the above descriptions.
Page 2 right side.
A 2-page table flowing or breaking into a 3rd page.
Page 3 left side.
The overflow of the subject table.
[Layout Break]
[Section Break]
Is there some other way to anchor a table to the text other than Inspector>Wrap>Object Placement/Inline (moves with text)? -
Overset text will not go into the text box that is part of the master for the next page
I am trying to (first time user) set up a simple trade-paperback sized book with some photos. Have set up several masters for chapter title pages, chapter inner pages, etc. When I copy text out of Word into InDesign, (copy/paste) the text overset box appears. I load it, then go to the next page, which I have already formatted using one of the masters. But when I select the desired text box ((Ctrl/shft) and click, the overset text forms a new text box, What am I doing wrong? thanks
I have done, this did work right for at least the left side of the spread, but never for the right side -
Make sure the left and right page master page text frames are threaded View>Extras>Show Text Threads. Here I have left and right page text boxes threaded on my A-master spread:
Checking Smart Text Reflow can make adding long text to master frames easier:
With Smart Text Reflow enabled I've released the master page text box on page 1, note the released frame has a solid border, while the unreleased master page frames on subsequent pages are dotted indicating they are still master page items and not page items.
The result of the paste: -
Carry over formatting to the next page without adding a text box
I've written 15 books on the old pages and had no trouble carrying the formatting to the next page without adding a page or adding a text box to the added page. I just kept on typing. I've added the new pages and had trouble right from the start so I went back to the old and got a good start, but going through that added procedure on every new page gets old in a hurry.
It shows the number of pages at the bottom, but a new page doesn't come on automatically when I type.
Please help.
Thanks,
Ron - [email protected]1. Why not continue to use Pages '09 in your Applications/iWork folder?
2. In Pages 5:
Setup (gear icon far right of toolbar) > check Document Body
and the text will flow from page to page.
Peter -
How to automatically create a table on the next page?
I was working on my Resume using tables on Pages 13. When the first page is nearing to be filled in, I continue to put more details as I expected the table to be created automatically in the next page, like that of Microsoft Word but it did not happen. What happened was the table continue to elongate only on the first page eventhough the last part cannot be seen anymore. Please advise me how to do this, if possible. Thanks.
You need to make the Table Inline ie part of the text.
Select the Table by clicking on the large dot top left > Cut > Click in the Text > Paste
It will now flow from page to page, but there is a bug in Pages 5.2, which means text may not show in the table after a few pages.
The table will also break at cell boundaries, it will not divide a cell over 2 pages.
Peter -
Some of the data for same records is going on to the next page in excel??
Hello,
I designed a template in word with page setup orientation to Landscape, to get the Excel report output. Later when i preview the same in Excel with the Landscape page setup..the print preview is showing me with some of the data going out of the page set up.My font size for data in word I put is 8pt Times New Roman.
Basically..my requirement is to print the report in excel with the landscape page setup.
But some of the data for same records is going on to the next page in excel??
How do i prevent this from happening?
Thanks in Advance!Hello
The blog suggested above is to set the output for a PDF document using RTF template. Whereas, my requirement is to get a excel output using RTF template, with data fitting directly with in the landscape orientation of EXCEL when printed.
Basically, the requirement is : When i run the report, the excel output should be sent to a printer with style 'Landscape' from apps?? But the problem is that i am not getting all the pagebreaks i put in the RTF template and also some of the data for the same records is not fitting in to the landscape orientation of the excel while it gets printed.
But when i run the same as a PDF everything is fine... ..But that's not my requirement...Please help!
Thanks, -
Please help! ios 7 download on iphone 4 stuck at rescue email. Can only go back, will not go on to the next page.
That makes no sense . Can you take a screenshot and show me? hold home button and power for about 2 sec then on computer import the photo (http://support.apple.com/kb/ht4083) and upload it here. Have you restarted the iphone yet?
-
Header not getting displayed in the next page in the second table
Dear Experts ,
I have a query regarding Header not getting displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are 2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin HadaHi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
next --> NEXT
in next page
page---> NEXT
next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL.
Maybe you are looking for
-
The AirPlay device is not compatible with this version of iTunes.
I can no longer connect one of my Air Port devices. I continually get the same error message. "The AirPlay device "Bedroom" is not compatible with this version of iTunes." Bedroom is the name I gave the device. I just updated my Itunes, and it shows
-
Best Output for DVD from FCP???
I'm a newbie and need help. I was outputting from FCP 6.0.4 using Export > QuickTime Movie, then importing that file into DVD Studio Pro. But, a college student who saw it recommended Exporting using Compressor 3.0.3 which I did using the DVD: Best Q
-
ADI Sound Drivers for Mini Note 2133 Netbook
Have just spent a day removing Linux and installing Windows XP pro on a new Mini Note 2133 Netbook, downloaded all the relevant XP Drivers prior to installing XP, after installation run all the HP Drivers with no problem - Except the ADI Sound Driver
-
Displaying types in SOAP envelope
TCP tunnel displays my SOAP body as follows: <soapenv:Body><AddUpdate xmlns="uri:webservice.thenet.software.com"> <TheNetObject> <Reference xmlns="uri:thenet.software.com"><ID>BPELTest</ID></Reference> <AccountName xmlns="uri:thenet.software.com">BPE
-
Hi, afaik java natively support 16bit acquisition maximum. Since i need to acquire 32bit signals from a professional board, i was wondering if there's a solution to do that in java. (I already tried with jsasio stuff but with no great results. Someti