A T1 that DOESN'T pass DNIS with a Fax line on it

I have a customer that has purchased a CME with a T1 card that I am cutting over tomorrow night and their existing didtal T1 is somewhat of a hybrid "1FB" in the fact that it has 9 numbers that hunt off of a main number and, in this mix of numbers there is an additional number that allows "back-door" calls inbound outside of the hunt. They also have a fax line on this "trunk" that, when calls come in, a fax tone is applied by the CO. This is pretty rare and I am having difficulty in how to go about trimming out the fax line and extra line. Do I have to pin down the carrier to determine which "1FB" is assigned to which channel on the T1? Also, what is the best way to configure this. I was thinking the only way to separate is to create separate DS0 groups, such as:
ds0-group 0 timeslots 1-9 type
ds0-group 1 timeslots 10 type
ds0-group 2 timeslots 11 type
..and so on....
But, am I on the right track here and, if I set it up like this, can I still allow the fax line to be separate if no DNIS is being sent by the carrier. (OH YEAH...I forgot.....the existing MUX the customer is using is an old Adit 600!)
Please help me out, folks!
Thanks.

You must write your own VoiceXML document that implements fax detection. Cisco does not provide a VoiceXML script that you can download. Refer URL for more information
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_administration_guide_chapter09186a008011066b.html

Similar Messages

  • FILL THAT DOESN'T CUT OFF WITH SHAPE

    I know the title is confusing, but can anyone tell me how to create a fill for a shape that doesn't cut off at the shape's edge without manually creating each edge? I live in Louisiana and the ubiquitous Fleaur De Lis is EVERYWHERE. Anyways this weekend I saw a jacket with a fleur de lis made of rhinestones. I wondered if I could create that, but I can't get my fill to work right, the fill keeps on cuttin off. Of course now I am using a halftone pattern but in the future I may create a tree made up of leaves and animals and I don't want them cut off. Am I making any sense?
    Thanks for any help!

    See here for example:
    http://www.vektorgarten.de/align-and-distribute-pathfinder.html

  • Exporting an flv that doesn't stutter and is a small file size

    i know you can make an h264 and change the extension to flv but that doesn't help me with this particular issue: I am working in fcp 5.0.4. I have a two minute sequence. When I use the On2 plug-in and export an flv out of fcp I get a 30 MB file and I need to get it down to more like 2 MB! Plus, it stutters. I've tried 15fps and 30 fps. 15 looked better. How shall i get this file to 1. not stutter and 2. be a lot smaller in file size? thanks so much!

    You can report a problem from this link..
    iOS: Troubleshooting applications purchased from the App Store
    You can write a review on the page you purchased the app from at the Mac App Store.

  • HT202667 Hi - My daughter was using her Apple TV until recently when she got a Smart TV.  Now the Apple TV is not needed so she passed it on to me.  How do I get it transferred over from her Home Sharing account to mine so that I can use it with my PC?

    Hi - My daughter was using her Apple TV until recently when she got a Smart TV.  Now the Apple TV is not needed so she passed it on to me.  How do I get her Home Sharing account transferred over to mine so that I can use it with my PC? Thanks!

    As  Winston Churchill wrote, however you might want to do a factory reset on the Apple TV.
    This way all information pertaining to your daughter will be removed from the device. Specifically if see was sign into any of the streaming service, Netflix, Hulu, etc. her credentials will still be associated with this Apple TV, doing  a factory reset will remove all that and make it as if you purchased the device and just plugged it in.
    regards

  • Need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any idea

    need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any ideas? Is this now customer service or does adobe have a customer service team . Site not user friendly. Thanks

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • MY IPOD APPEARS TO BE ZOOMED INTO THE SCREEN AT ALL TIMES, MAKING IT DIFFICULT TO DO SIMPLE TASKS SUCH AS GO BACK, OR SELECT A PLAYLIST, ETC. I'VE TRIED PULLING IT OUT WITH MY FINGERS BUT THAT DOESN'T WORK. PLEASE CAN YOU HELP!!! THANKS.

    I've got a touch iPod and for about a week now it's almost been permenently zoomed into the screen? I actually cannot get it to zoom back out. I've tried pulling the screen out with my fingers but that doesn't work. It's zoomed in on my home pages, on my music, settings everything! It makes simple things like deleting a number from my password login extreamly differcult. Please can someone help?!?! Thanks.

    Double tap the screen with three fingers to un-zoom.
    Then go to Settings > General > Accessibility > Zoom and turn this OFF.

  • I want to cut and paste iCal entries on iPad.  Have seen a number of questions raised but no definitive answer - is it possible or not?  (I use Bento but that doesn't sync with ICal now so can use that solution)

    I want to cut and paste iCal entries on iPad.  Have seen a number of questions raised but no definitive answer - is it possible or not? 
    (I use Bento but that doesn't sync with ICal now so can use that solution)
    Hope to hear helpful news soon....
    C

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this?  Thanks in advance.

    After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this?  Thanks in advance.

    I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.

  • How do I set up a calendar on my iphone that doesn't sync with iCloud?

    I have an iPhone, iPad , iMac and Mac mini all connected to iCloud for syncing of iCal, Mail, Address Book etc.
    I want to set up a calendar on my iPhone that doesn't sync to my other devices, so that I can set reminders that will only pop up on the iPhone.
    Can anyone help with advice? Does iCal/iCloud handle this?

    Have read the printer manual, it will contain instructions for connecting it to a network, and then to your Mac. You don't identify this printer so it's difficult to be more specific.
    You can also go to the printer manufacturers website and seek assistance there.

  • Is there a way to "force-mount" an external drive that doesn't show up on it's own when plugged in with firewire?

    Hi, is there a way to "force-mount" an external drive that doesn't show up on the desktop? I have a new Hitachi SATA III 2 TB Ultrastar that won't show up like all the other drives when plugged in. So I can't partition, repair, format etc with Disk Utility, Disk Drill, Tech Tools etc. How do I make it visible?
    I use the FW 400 to 800 adapter and a FW hub.
    Thanks,
    W.

    ok, I did find the log in Diskutil of what happened, I just can't figure out why it happened and how to start over:
    2014-04-20 13:42:08 -0400: Disk Utility started.
    2014-04-20 13:44:30 -0400: Preparing to erase : “Terra 8”
    2014-04-20 13:44:30 -0400:           Partition Scheme: GUID Partition Table
    2014-04-20 13:44:30 -0400:           1 volume will be created
    2014-04-20 13:44:30 -0400:                     Name                    : “Terra 8”
    2014-04-20 13:44:30 -0400:                     Size                    : 2 TB
    2014-04-20 13:44:30 -0400:                     File system          : Mac OS Extended (Journaled)
    2014-04-20 13:44:30 -0400: Unmounting disk
    2014-04-20 13:45:00 -0400: Creating the partition map
    2014-04-20 13:45:01 -0400: Waiting for the disks to reappear
    2014-04-20 13:45:01 -0400: Formatting disk2s2 as Mac OS Extended (Journaled) with name Terra 8
    2014-04-20 13:45:26 -0400: Initialized /dev/rdisk2s2 as a 2 TB case-insensitive HFS Plus volume with a 155648k journal
    2014-04-20 13:45:26 -0400: Mounting disk
    2014-04-20 13:45:29 -0400: Erase complete.
    2014-04-20 13:45:29 -0400:
    - That was it, gone.....

  • I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

    I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

    Please quote the exact error message, word-for-word, verbatim.
    What is your operating system?
    What version of Lightroom?

  • Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road.

    Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road while driving. For that reason, I'm also not interested in adding in headphones or additional devices that have the desired button functions. Going both forward and back would be great but I would be pleased just to have a "sight-free" way to go forward.
    I've seen some mention here and there about ways to maybe change it so the volume buttons change tracks and holding the volume buttons changes the volume... but I don't know what's involved in that or if its even possible/recommended for a new 5th gen iPod. I think its a great device but its sadly lacking in music oriented functions and features... which is disappointing since music is why most people would bother getting one instead of some other "iDevice" :/

    Given that you cannot do what you have asked for, perhaps you simply need to find another solution to your root problem.
    Presumably, you want to skip to the next track because you don't want to hear the current one, and that is because...
    You don't like it.
    You've heard it recently and don't want to hear it now.
    Simply don't want to hear it at this time.
    For problem number 1. Don't put it on the iPod in the first place. (I know, obvious answer!)
    For problem number 2. How about playing from a Smart Playlist (initially created in your iTunes Library) which has only songs you've not played recently?
    For problem number 3. Hhhmmm! Create alternative Playlists for use in the car.
    As for going back to the start of the "now playing" track.... Well, if your Playlist has only songs that you really, really want to hear, then you'll be looking forward to that rather go back to the beginning of the current song.
    I'm not trying to be prescriptive, just giving you food for thought.
    (They are all cheaper options than buying a car which can control the iPod from the steering wheel.)

  • I have been using Aperture 3.3.2 with Mac OS-X 10.7.5.  This version doesn't support RAW with Nikon D7100, I decided to upgrade to 3.4. On downloading, it tells me that to upgrade, I need Aperture Vers.3!  which I have.  What to do??

    I have been using Aperture 3.3.2 with Mac OS-X 10.7.5.  This version doesn't support RAW with Nikon D7100, so I decided to upgrade to 3.4. On downloading, it tells me that in order to upgrade, I need Aperture Version 3, which is what I have.  What is one supposed to do??

    Have you moved or renamed your Aperture 3 version? If it is not installed in the "Applications" folder or not named simply "Aperture", then Software Update will not recognize it.
    Put Aperture back and "Software Update" should find your version.
    Regards
    Léonie

  • How to I get rid of an "Open With..." option that doesn't exist?

    I've tried to find out how to remove an element of the "Open With..." options but don't seem to be getting much traction. I have an old application listed in the "Open With..." pull down menu that doesn't exist anymore, but when I select the file, using command-i, to change which application opens the file, it works for that file. I want to change association using the "Change All" button, but when I do that, the "dead" application becomes the default application again and I'm back to square one. Is this fixable? How do I get rid of the useless option? Will I have do do this for each file?

    your link gave me a good starting place...
    /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -R -all -domain local -domain system -domain user
    this seemed to do the trick... I would have never have solved this without your suggestion.
    thanks.

  • Use... I realized that i spent my 27 years for using (fixing) computers. Because the Mac was perfect. After iMac, i was really fine with my computer... But after something, that doesn't bother me, happened. The screen started to get cloudy and black... An

    Hi...
    My name is Turgay and have been using computer since 1982... 2 years ago, because of my friend's advice, i bought an iMac... It was the first Mac that i use... Till that, i was using normal PC's...
    I bought an 24" iMac on July 2009 and started to use... I realized that i spent my 27 years for using (fixing) computers. Because the Mac was perfect. After iMac, i was really fine with my computer... But after something, that doesn't bother me, happened. The screen started to get cloudy and black... And it increased. Because of this i took my iMac to your authorised distributor http://www.bilkom.com.tr...
    They changed my screen but in 2 months it happened 3 times and i wanted them to change my iMac with new one, under customer laws... In our country, the device must be changed with new one if the same problem occurs in 3 months. Because i know the customer satisfaction of Apple, i didn' worry about it but Bilkom refused my will... I spoke with them for 2 months but nothing happened, they just told me, it' not our problem.
    Because of this speech, i sued them on June 2011... Last week, i won the case but just for the return of invoince... It costs 3.200 Turkish Liras (1.800$) and there's no 24" iMac unused... Bilkom again refused to give me an iMac... I thought that Apple's customer satisfaction can't be like this... I didn't write anything to Apple till now but if i can't get an iMac, i must return to normal PC after 2 years... And i don't want that... I offered an iMac 27" with core i7... No matter Bilkom accepts or not, they don't care of me... I'm a customer, they should do... I've never seen such a like company. I hope the real Apple will help my problem and save me from Bilkom...
    Waiting for your reply... Thanks and regards...
    Turgay Kala
    General Manager

    Unfortunately, you are not communicating with Apple here - we are all other users volunteering our time to help with technical problems.
    Here is a list of Apple contacts; there is no email address  - you will need to write a letter to their corporate headquarters or call them:
    http://www.apple.com/contact/
    Although, it appears that your problem is with a third party store and that you have won in court - did you get your money back? 24" iMacs have not been made since 2009 or 2010. Now there are 21" and 27" iMacs.

Maybe you are looking for