A table haing more than one view

Hello Gurus,
I have one standard view V_FAGL_T8A30 which is working properly. But there is one Z VIEW which is similar to the previous view .So when I am trying to display values through sm30 I get to see the values maintained in the standard view. So when i try to make new entries to the view i get an error that the proft center values doesnt exist in CEPC. But the values are maintained in the CEPC table .
Regards,
Abhishek.

Hi Abhishek,
Check the foreign key relation between the table-field of Z view and field of CEPC. May be the domains are different. One of the domain may be having conversion routine and the other may not be having it.
Regards,
Arun Mohan

Similar Messages

Error while running spatial queries on a table with more than one geometry.

Hello,
I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry.
When GeoServer renders objects with more than one geometry on the map, it creates a query where it asks for objects which one of the two geometries interacts with the query window. This type of query always fails with "End of TNS data channel" error.
We are running Oracle Standard 11.1.0.7.0.
Here is a small script to demonstrate the error. Could anyone confirm that they also have this type of error? Or suggest a fix?
What this script does:
1. Create table object1 with two geometry columns, geom1, geom2.
2. Create metadata (projected coordinate system).
3. Insert a row.
4. Create spacial indices on both columns.
5. Run a SDO_RELATE query on one column. Everything is fine.
6. Run a SDO_RELATE query on both columns. ERROR: "End of TNS data channel"
7. Clean.
CREATE TABLE object1
id NUMBER PRIMARY KEY,
geom1 SDO_GEOMETRY,
geom2 SDO_GEOMETRY
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM1',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM2',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
CREATE INDEX object1_geom2_sidx ON object1(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE' OR
SDO_RELATE("GEOM2", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'OBJECT1';
DROP INDEX object1_geom1_sidx;
DROP INDEX object1_geom2_sidx;
DROP TABLE object1;
Thanks for help.

This error appears in GeoServer and SQLPLUS.
I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
Anyone knows what could cause an error like this "End of TNS data channel"?

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how indesign can do this action.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how indesign can do this action.

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

More than one view with iphone SDK.

Hi
I'm trying to make more than one view in Interface Builder and then switch between them in xcode. But I can not figure it out.
I tryed reading guides, watching tutorials, but with no luck.
Can anyone here give me a small tutorial on how do that?

Your best bet is to look through the code (and xib files) distributed by Apple. I was in much the same position a couple of months ago, except my expertise was in JEE. It is really not that difficult to get going. Just a regular Cocoa development book can also help you (it helped me understand how to get going).
Here is what you will start with
ApplicationDelegate - Will be connected by default in your primary xib file. For simple applications that is all you need. If you need multiple views, you can still make the primary nib file you primary view and lay it out as you need. Add methods as appropriate to remove current view and display next view you want.
Xxx.nib - Your primary xib file. Layout out as required. Create a UIViewController and connect to the File's Owner. That connects your controller to the view. Make connections to the view components in the xib file, event handlers etc. It is not difficult, but IMO IB is not very intuitive, though you will get the hang of it very quickly.

How to add the rows formatted as table headings, Tables headings are repeated when a table spans more than one page.

Hi all,
i am facing problem while generating Test Result word document after successful execution of TestStand.
The Problem is :
i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
Example:
Page No. 1
|     Test case Number | Test Step number      |
|      100                         |            100                   |
Page No. 2
|     Test case Number | Test Step number      |
|      200                         |            300                   |
Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
Please through light on this.
Regards,
Susa.

Hi Santiago,
Thank you very much for your valuable reply.
i want to generate MS-word report for TestStand after successful testing using MS-word2000.
Test report contains Actual values, Expected values and Pass/Fail status.
In my program i have customized all fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header but it start with values of above said parameters.
so i'm not able to repeat table row header for each page.
Please find the attached file for your reference.
Attched file expected.doc :   This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
Attached file Actual output from source code.doc   : This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
i think this information is sufficient for you,
Still if you need some information please ask me.
Thanks
Susa.
Attachments:
Actual output from source code.doc ‏25 KB
expected.doc ‏26 KB

Populating more than one table and more than one field

I need some suggestions and this forum has always been a great source of good advice.
I have a web form at the following location: http://www.webdevpractice.com/genoptix/CE/register.php
Here's what the web form needs to do:
Send a confirmation email listing seminars the visitor checked on the form.
Create a similar message on a confirmation page.
Populate 2 two tables.
Items 1 and 2 are working fine.
The advice I need is on how to populate two tables in the database.
There are three tables:
ACCOUNTS
account_id
first_name
last_name
medtech_id
job_title
npi
company
city
state
email
phone
contact
ATTENDANCE
attendance_id
account_id
seminar_id
SEMINARS
seminar_id
seminar
speaker_first_name
speaker_last_name
date
The web form contains data that need to go into the ACCOUNTS table and the ATTENDANCE table. The challenge is getting the account_id and seminar_id into the ATTENDANCE table. If all the information was inserted properly, I could write a query that revealed who was taking what seminar.
Inserting data into the ACCOUNTS table is not a problem. I will create another form to insert information into the SEMINARS so that should not be a problem. But inserting the account_id and the seminar_id is what I am wondering about. Also, can more than one record be inserted in a table? If an user checks more that one seminar, each seminar (seminar_id) would need to be inserted in the ATTENDANCE table as separate records along with the account_id. I'm thinking I may have to do this manually. Also, the values for each seminar are their dates and titles. I used these as values to send the confirmations.
I'm just looking for advice at this point. Is this doable?

Bregent,
The table I am wondering about is the ATTENDANCE table. There are two fields in addition to the primary key: account_id and seminar_id. The field I am concern with is the seminar_id which comes from a group of checkboxs on the form. So, one form could create several records. For example, presently there are three seminars that are offered. If the visitor selects all three seminars, that would create three records in the SEMINARS table. So, it might look like this:
attendance_id     account_id     seminar_id
     1                    1                    1
     2                    1                    2
     3                    1                    3
My PHP skills are basic. I've done other forms and use PHP in other ways. But I have never had to populate several rows in one table with an array of checkboxes nor have I be able to find an example of this.
So the advice I am seeking (and perhaps this is premature) is this:
Can one field from a table populate more than one record?
Should I set up checkboxs as a group or individually with a different name?
I am also considering setting up my tables differently so there is a table from each seminar--that may solve my problem.

Spatial index creation for table with more than one geometry columns?

I have table with more than one geometry columns.
I'v added in user_sdo_geom_metadata table record for every column in the table.
When I try to create spatial indexes over geometry columns in the table - i get error message:
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13203: failed to read USER_SDO_GEOM_METADATA table
ORA-13203: failed to read USER_SDO_GEOM_METADATA table
ORA-06512: at "MDSYS.SDO_INDEX_METHOD", line 8
ORA-06512: at line 1
What is the the solution?

I'v got errors in my user_sdo_geom_metadata.
The problem does not exists!

How to read an internal table with more than one (2 or 3) key field(s).

how to read an internal table with more than one (2 or 3) key field(s). in ecc 6.0 version

hi ,
check this..
report.
tables: marc,mard.
data: begin of itab occurs 0,
      matnr like marc-matnr,
      werks like marc-werks,
      pstat like marc-pstat,
      end of itab.
data: begin of itab1 occurs 0,
      matnr like mard-matnr,
      werks like mard-werks,
      lgort like mard-lgort,
      end of itab1.
parameters:p_matnr like marc-matnr.
select matnr
       werks
       pstat
       from marc
       into table itab
       where matnr = p_matnr.
sort itab by matnr werks.
select matnr
       werks
       lgort
       from mard
       into table itab1
       for all entries in itab
       where matnr = itab-matnr
       and werks = itab-werks.
sort itab1 by matnr werks.
loop at itab.
read table itab1 with key matnr = itab-matnr
                          werks = itab-werks.
endloop.
regards,
venkat.

How can I sort a table using more than one column in Numbers or in Pages?

How can I sort a table using more than one column in Numbers or in Pages?

Hi Ron,
On the right side of the Toolbar click the Sort and Filter button, then select Sort.
You can then set up a multiple column sort.
Click Add A Column, Specify the sort for that column, Repeat.
Jerry

VLD-0201:Table has more than one primary key

hi
i'm working with OWB 9.2,I was imported the table from database,when i validating that it is giving message:
VLD-0201:Table has more than one primary key
vld-0209:Duplicate unique key i.e:cust_acc and SYS_C00435 detected.
Can i use this table and generate the mapping with out any errors?
Any help will be very generate.

Hi Ashok,
I'm quite curious how you managed to get a table with 2 PK's.
I tried it myself:
=======================================================
SQL>create table x(c1 number constraint pk1 primary key,c2 number constraint pk2 primary key, c3 date);
create table x(c1 number constraint pk1 primary key,c2 number constraint pk2 primary key, c3 date)
ERROR at line 1:
ORA-02260: table can have only one primary key
SQL>ed
Wrote file afiedt.buf
1* create table x(c1 number constraint uk1 unique,c2 number constraint uk2 unique, c3 date)
SQL>/
Table created.
=====================================================
As you can see, trying to create a table with more than 1 PK is impossible. With Unique Key, that IS possible (see second example).
I don't expect mappings to function properly with such an error message.
Is it possible for you to drop the table in the database, correct the definition of the table in OWB and then deploy that corrected version to the database?
If on the other hand the table on the database is correct (i.e. has only one PK) then the import into OWB obviously did not go well and I'd suggest you drop the imported definition and try to import it again.
Cheers, Patrick

CS3: Table on more than one page - How can I get the UIDRef's of the pages?

Hi
I have a table over more than one page. How can I get all UIDRef's of the pages who contain parts of the table?
Thanks
Hans

Hi
Thanks for the answer.
- How can I get all page items of a table?
- One other question: If I have a table over two pages (side by side) there is only one page item of the table. Right? How can I get the two pages (UIDRef) in that case?
Thanks
Hans

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

Logical table having more than one Logical table sources

Hi ,
Is it possible a logical table has 2 logical table sources and there is no join between the underlying table of logical table sources?
What will happen if we create the request which contains one attribute from each source?
Will BI server return records with Cartesian join?
Is it mandatory if logical table is having more than one logical table sources(exp. Logical table sources are X,Y and underlying table is A,B respectively),
The underlying tables (A&B) must be joined ?
Can someone explain the logic behind the logical table sources? How does it work?
Any reference of document will be appreciable.
Thanks,Ashish

Hi Stijn,
Thanks for response.
You are saying that Oracle BI server will run a query against both tables and combine the results. But if there is no possibilty of any type of join, how BI server will combine the results from both tables.
I have a scenario like below -
Suppose i have 2 tables A and B at physical layer. Both table contains the information of any common subject area.
But there is no attribute is common between A and B so not any kind of join possible between two.
Now if i create a logical table with 2 logical table source A and B and create any request having one column from A and one from B ,
What will happen? How BI server will combine the result? Will BI server not result records after Cartesian join.
How can i model this scenario?

SapScript - Print table out_par - more than one entry for object

Hi Gurus,
following problem.
I have a SapScript form and call an external program from within the form.
In this programm I get more than one entry for the same out_par-value - this is correct.
My problem now is that on the form there is only printed one of the entrys.
Here my coding in SapScript.
/:           DEFINE &ZZ_OBJECT& = '        '
/:           PERFORM LESEN_OBJEKTLIST IN PROGRAM ZIHFORM
/:           USING &CAUFVD-AUFNR&
/:           CHANGING &ZZ_OBJECT&
/:           ENDPERFORM
*           All involved object:
*           &ZZ_OBJECT&
Many thanks in advance for your help.
Regards

In Sapscript PERFORM-ENDPERFORM statements, the parameters can contain only one value as they are variables of type character & length 80.
If you want multiple values in your CHANGING parameters, fetch all of them in different variables. Also, in your program store them in the same order, in the output internal table of structure ITCSY.
Check this thread
http://wiki.sdn.sap.com/wiki/display/profile/ExternalSubroutinesinSAPScript

ADF Table with more than one TableSelectMany column

Does anyone know how to add more than one TableSelectMany component to a table? So, basically I'm trying to have two checkboxes for each row in the table
thanks,
Eric

Eric,
the TableSelectMany column is element of the selection facade which only takes one element.
To create additional checkboxes, you can - of course - add an additional table column to the table and add a checkbox to it
Frank

A table haing more than one view

Similar Messages

Maybe you are looking for