"A technical error during invocation : Could not invoke service reference" Error message while calling a service from BPM

Hi Experts,
We are facing a issue while calling a Automated activity from BPM process, the process gets suspended and the BPM logs says "Process XYZ suspended, A technical error during invocation: Could not invoke service reference name fdhueoegghejietyhsjk6886 Component name ABC " We have already checked the mapped service reference and provider system. Gone through the below link, but no help.
http://http://wiki.scn.sap.com/wiki/display/TechTSG/Sending+a+message+from+SAP+NetWeaver+BPM+process+to+PI+fails+via+automated+activity?original_fqdn=wiki.sdn.sap.com
Any pointers or suggestions to fix up this issue will be highly appreciated. Thanks in advance.
Regards,
Mohit Jaju

The details/ID in NWDS Service Reference must exactly match the SOA configuration. Sometimes it's possible you have changed the reference or the group itself and something changed to become mismatched.
It's possible they don't match - but the SG itself will show green in NWA since the service exists and responds on the target system. Does the ID listed in the error match what is shown in the NWDS project?
regards, Nick

Similar Messages

Msi.webprintlist fatal error during installation could not open key: unknown/component/da42bc899bf25

msi.webprintlist fatal error during installation could not open key: unknown/component/da42bc899bf25bdaf18c3b9b1a1ee8\ab4027db46dde994b955a68c2fdf44a. verify that you have sufficient access to that key, or contact your support personnel. please go to http:\\hp.com\support for troubleshooting information about "fatal error" and " msi.webprintlist"

Hi Assennatog, the problem could be in the registry keys that are still present even if you completely uninstalled all the NI SW. So, after having uninstalled every NI apllication, try to execute the keys deleting proccess, by using MSIBlast, in the way it's explained in the attached doc. Ciao!
Attachments:
msi.doc ‏32 KB

Error "Test Agent could not connect to the test controller" while configuring the Test Agent on Client machine

Hi,
I am getting an Error “Test Agent could not connect to the test controller”
while configuring The Test Agent on Client machine.
Pre-requisite used:
VS2012 update 4, Test agent & Test controller of same version used
User has TFS admin access.
Same user id used for configuring Test Agent.
Description:
Test controller is installed on server A. I want to install test agent on client machine B.
Windows Fire wall is OFF on both Machines A & B. While configuring Test Agent below error is occurred:
“Test Agent could not connect to the test controller”
In log file error was “I, 2015/04/02, 15:32:21.723, Could not get the status from the test agent. Exception: Failed to connect to an IPC Port: The system cannot find the file specified.”
In Event viewer below error details given:
Unable to connect to the controller on ‘My Server: 6901’. The agent can connect to the controller but the controller cannot connect to the agent because of following reason: The requested name is valid, but no data of the requested type was found.
Make sure that the firewall on the test agent machine is not blocking the connection.
Could you please help me to find solution?
Thanks in advance!
Kanchan M
Kanchan

Hi Kanchan,
So on each computer, you create a local user account that is a member of the Administrators group, and use the same account and password on each machine(controller and Agent), am I right?
Could you enable the detailed log message?
http://blogs.msdn.com/b/aseemb/archive/2010/03/07/how-to-enable-test-agent-logs.aspx
http://blogs.msdn.com/b/aseemb/archive/2009/11/28/how-to-enable-test-controller-logs.aspx
>>In log file error was “I, 2015/04/02, 15:32:21.723, Could not get the status from the test agent. Exception: Failed to connect to an IPC Port: The system cannot find the file specified.”I
met a similar issue before which was related to the Firewall exceptions, maybe you could refer to it here:
http://stackoverflow.com/questions/12249093/test-agent-could-not-connect-to-the-test-controller-vs2012-agents
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HT201210 How can I restore my 4s from recovery mode with itunes sign on? I keep getting an error saying "iphone could not be restored. an error has occured"

Tried updating to iOs 6 on my 4S, now computer pops up error saying , can not restore iPhone due to error. I've tried restarting phone & computer, phone keeps going back to screen with iTunes sign & USB cord.

my iphone5 having same problem

Error : - Could not invoke the browser

Hi,
I am new in oracle forms. I installed oracle forms 10 on my system. When I run the application it gives the error
FRM-18126: Could not invoke the browser
Is there any way to resolve this error.
Thanks.

hi
Try to restart your oc4j instance and start your browser and put http://<hostname:8888
This may help you

E902: package could not be installed. Error in installing application

Hi All,
we try to deploy our first application(IPPhoneServicesTutorial)
we do it using designer 2.4.2.009 on application server cuae
2.4.2.009, and we get the following error:
E902: package could not be installed. Error in installing application
we check the application server log and this is the result:
Full information as follows:
Source: mscorlib
Message: Value cannot be null.
Parameter name: path1
Stack Trace:
at System.IO.Path.Combine(String path1, String path2)
at
Metreos.ApplicationFramework.Assembler.Assembler.DetermineWSE3Path()
at Metreos.ApplicationFramework.Assembler.Assembler..cctor()
2008:04:07::04:57:29(04): Error: AM
Application 'IPPhoneServicesTutorial' installation failed:
Application IPPhoneServicesTutorial failed to load.
2008:04:07::04:57:35(10): Info: MCP Unable to connect to media
server Media1 (127.0.0.1)
2008:04:07::04:57:50(17): Info: MCP Unable to connect to media
server Media1 (127.0.0.1)
2008:04:07::04:58:05(17): Info: MCP Unable to connect to media
server Media1 (127.0.0.1)
2008:04:07::04:58:20(18): Info: MCP Unable to connect to media
server Media1 (127.0.0.1)
note that the media server service always stoped automatically

Hi,
I am also getting the same error. I did one sample application in cuad. when i try to build my project the following error came:
Full error information as follows:
Source: mscorlib
Message: Value cannot be null.
Parameter name: path1Stack Trace: System.String Combine(System.String, System.String)
at System.IO.Path.Combine(String path1, String path2)
at Metreos.Max.Framework.ProjectBuilder.PackageApplication()
at Metreos.Max.Framework.MaxMainUtil.BuildProject(Int32& warningCount, Int32& errorCount)
at Metreos.Max.Framework.MaxMain.OnBuildProject()
Please help me regarding this.
Thanks,
Ajith

Getting the error " [java] Problem invoking WLST - java.lang.RuntimeException: Could not find the OffLine WLST class " while building the O2A 2.1.0 PIP

Getting the error " [java] Problem invoking WLST - java.lang.RuntimeException: Could not find the OffLine WLST class " while building the O2A 2.1.0 PIP. I am using the Design Studio 4.3.2 for building the O2A 2.1.0 PIP. Please let me know how to resolve this issue. Here I am enclosing the log file .

We have basically the same issue when we try to create the interpreter using the embedded method..
I was able to use the interpreter embedded in a java client as long as the weblogic jars were located in a weblogic install if I tried to use them from a maven repository no luck at all...
All of this worked easily in 9.2 now in 10.3 it seems more error prone and less documented.
I have seen close to a 100 posts on issues related to this so is there a document which outlines specifics....
We / I have used weblogic now for almost 10 years and moving from 8.1 to 9.2 was painful and we expected the move from 9.2 to 10.3 not to be soo bad but its proving to be as painful if not more painful than moving to 9.2. We seem to spend a good bit of our time working around issues in the next new release that were not in the previous one..
Any help would be appreciated I think we will open a support case but even that is more painful...
Any help would be greatly appreciated..
PS: We confirmed that all jars in the startweblogic classpath were in the startup. The server we have the embedded wlst instance is a managed server and we are using the component in a war... Are there any restrictions which we are unaware of.
Error we get is
1 [ERROR] com.tfn.autex.order.weblogic.QueueMaintenanceUtility.addQueue():217 Error Adding Queue wowsers JNDI Name wowsers Exception: Invocation Target exception while getting the WLSTOffLineScript path

Error: "Transaction type could not be determined" during PO Creation fromSC

Hi all,
I'm working on SRM 5.5 with ECS.
During the creation of a PO I want to add a SC as an item of PO.
But when I chose the SC and click on the button Add to PO I recive the error:
Transaction type could not be determined
In the organizational unit I set the attribute BSA and DP_PROCT_TY.
there are other steps I have to do to join the transaction type of SC and PO?
rgs
enzo

Hi Enzo,
First check if the attribute BSA and DP_PROC_TY have the same value.
Then in the attribute value for BSA, change the source system for the document type to your SRM system.
Create a new PO and a shopping cart.
Try changing the PO by adding the shopping cart
Hopefully your problem may get resolved.
Thanks
Sanjeev

I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can't continue: unexpected failure during app

I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can’t continue: unexpected failure during application startup I paid for the month subscription of 29.99. It claims it is downloading again?! Am I missing something here? Why is this process so complicated? I need to get this resolved asap and start working.

I originally had Adobe Photoshop Extended, then upgraded to the Production Suite. I ran the Adobe Cleaner, and that uninstalled most Adobe products, including my existing Adobe install, and then I re-installed everything with the same error code. Since CS4 came with CS5, I've installed AE CS4, but would really like to upgrade because I'm new to Creative Suite, and not sure how CS4 integrates with CS5...CS4 After Effects installed perfectly. I do have a 64 bit system, and installing to an OCZ Vertex 2....every other suite installs perfectly, except AE. And I think that is the coolest program in the Suite. I thank you all so much for taking the time to help, I really want to get AECS5 running...I did try to install after doing the recommended items Adobe suggests for Exit Codes 6 and 7, including turning off many startups...
I'm baffled....
Ben

"Could not deserialize session data" error during sign out

Hello,
I have an application deployed on WLS 8.1, one instance, no clustering. The application EAR contains 1 web module and 2 ejb modules. When I try to sign out(I use Single Sign-On for Multiple Applications - a sign out application deployed separately) I receive the attached error.
Notes: my session is serializable - I did a test that serialize and deserialize the session and I have no errors.
Q: Why does WLS try to deserialize the session data during sign out? I don't use any session persistance/replication.
The error ClassNotFoundException from my point of view is normal: UsersTableModel(from web modile) is not visible from the Application Classloader.
Here is the error:
<> <BEA-100028> <Could not deserialize session data.
java.lang.ClassNotFoundException: xxx.controller.actions.UsersTableModel: This error could indicate that a component was deployed on a cluster member but not other members of that cluster. Make sure that any component deployed on a server that is part of a cluster is also deployed on all other members of that cluster
     at weblogic.j2ee.ApplicationManager.loadClass(Ljava.lang.String;Ljava.lang.String;Ljava.lang.String;Ljava.lang.ClassLoader;Z)Ljava.lang.Class;(ApplicationManager.java:344)
     at weblogic.j2ee.ApplicationManager.loadClass(Ljava.lang.String;Ljava.lang.String;Ljava.lang.String;Ljava.lang.ClassLoader;)Ljava.lang.Class;(ApplicationManager.java:258)
     at weblogic.j2ee.ApplicationManager.loadClass(Ljava.lang.String;Ljava.lang.String;Ljava.lang.String;)Ljava.lang.Class;(ApplicationManager.java:253)
     at weblogic.j2ee.ApplicationManager.loadClass(Ljava.lang.String;Ljava.lang.String;)Ljava.lang.Class;(ApplicationManager.java:216)
     at weblogic.common.internal.WLObjectInputStream.resolveClass(Ljava.io.ObjectStreamClass;)Ljava.lang.Class;(WLObjectInputStream.java:48)
     at java.io.ObjectInputStream.readNonProxyDesc(Z)Ljava.io.ObjectStreamClass;(Unknown Source)
     at java.io.ObjectInputStream.readClassDesc(Z)Ljava.io.ObjectStreamClass;(Unknown Source)
     at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Unknown Source)
     at java.io.ObjectInputStream.readObject0(Z)Ljava.lang.Object;(Unknown Source)
     at java.io.ObjectInputStream.readObject()Ljava.lang.Object;(Unknown Source)
     at weblogic.servlet.internal.AttributeWrapper.convertBytesToObject([B)Ljava.lang.Object;(AttributeWrapper.java:173)
     at weblogic.servlet.internal.AttributeWrapper.getObject(Z)Ljava.lang.Object;(AttributeWrapper.java:114)
     at weblogic.servlet.internal.AttributeWrapper.getObject()Ljava.lang.Object;(AttributeWrapper.java:69)
     at weblogic.servlet.internal.session.SessionData.removeAttribute(Ljava.lang.String;Z)Ljava.lang.Object;(SessionData.java:614)
     at weblogic.servlet.internal.session.SessionData.removeAttribute(Ljava.lang.String;)V(SessionData.java:596)
     at weblogic.servlet.internal.session.SessionData.remove()V(SessionData.java:808)
     at weblogic.servlet.internal.session.MemorySessionContext.invalidateSession(Lweblogic.servlet.internal.session.SessionData;)Z(MemorySessionContext.java:69)
     at weblogic.servlet.internal.session.SessionData.invalidate()V(SessionData.java:750)
     at weblogic.servlet.security.ServletAuthentication.invalidateAll(Ljavax.servlet.http.HttpServletRequest;)Z(ServletAuthentication.java:184)
     at xxx.framework.authentication.WebAuthenticationHelper.invalidateSessions(Ljavax.servlet.http.HttpServletRequest;)V(WebAuthenticationHelper.java:574)
     at xxx.framework.authentication.WebAuthenticationHelper.closeSession(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(WebAuthenticationHelper.java:523)
     at xxx.framework.authentication.WebAuthenticationHelper.logout(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(WebAuthenticationHelper.java:250)
     at xxx.yyy.ViewDispatcher.process(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(ViewDispatcher.java:75)
     at xxx.yyy.ViewDispatcher.doGet(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(ViewDispatcher.java:42)
     at javax.servlet.http.HttpServlet.service(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object;(ServletStubImpl.java:996)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl;)V(ServletStubImpl.java:419)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(ServletStubImpl.java:315)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run()Ljava.lang.Object;(WebAppServletContext.java:6452)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Lweblogic.security.subject.AbstractSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Lweblogic.security.acl.internal.AuthenticatedSubject;Lweblogic.security.acl.internal.AuthenticatedSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(SecurityManager.java:118)
Edited by: user11291053 on 22-Jun-2009 02:52
Edited by: user11291053 on 22-Jun-2009 03:01
Edited by: user11291053 on 23-Jun-2009 01:42

When OptimisticSerialization is turned on, WebLogic server does not serialize-deserialize context and request attributes upon getAttribute(name) when a request gets dispatched across servlet contexts. This means you will need to make sure that the attributes common to Web applications are scoped to a common parent classloader (they are application-scoped) or placed in the system classpath if the two Web applications do not belong to the same application.
When OptimisticSerialization is turned off (which is the default) WebLogic Server does serialize-deserialize context and request attributes upon getAttribute(name) to avoid the possibility of ClassCastExceptions. The value of OptimisticSerialization can also be overridden for specific Web applications by setting the optimistic-serialization value in weblogic.xml.
[http://edocs.bea.com/wls/docs100/ConsoleHelp/pagehelp/Corecoredomaindomainconfigwebapptitle.html]
[http://e-docs.bea.com/wls/docs90/webapp/weblogic_xml.html#1067857]
I hope this helps :)

The process could not execute 'sp_repldone/sp_replcounters' error for Log Reader Agent and SQL Server Assertion 17066 & 3624 errors in SQL Logs

One of our SQL Server started creating SQLDUMP file and and on investigation I found the error longs are filled with Errors 3624 & 17066. There is transnational replication configured on one of the databases is the LogReader Agent is failing error "The
process could not execute 'sp_repldone/sp_replcounters' on XXXXX".
Not sure if both these Assertion & Logreader Agent errors are related. Before I remove and put the replication, I wanted to check if anyone has experienced the same issues or aware of what the cause.
***********Error messages from SQL Logs******
**Dump thread - spid = 0, EC = 0x0000000111534460
Message
A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to
Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
Error: 3624, Severity: 20, State: 1.
SQL Server Assertion: File: <logscan.cpp>, line=2123 Failed Assertion = 'UtilDbccIsInsideDbcc () || (m_ProxyLogMgr->GetPru ()->GetStartupState () < RecoveryUnit::Recovered)'. This error may be timing-related. If the error persists after rerunning
the statement, use DBCC CHECKDB to check the database for structural integrity, or restart the server to ensure in-memory data structures are not corrupted.
Error: 17066, Severity: 16, State: 1.
External dump process return code 0x20000001.
External dump process returned no errors.
Thank you in advance.

You need to determine if this error is a transient one or a show stopper one.
It sounds like your log reader agent has crashed and can't continue.
If so your best bet is to call Microsoft CSS and open a support incident.
It also sounds like DBCC CHECKDB was running while the log reader agent crashed.
If you need to get up and running again run sp_replrestart, but then you might find that replicated commands are not picked up. You will need to run a validation to determine if you need to reinitialize the entire publication or a single article.
I have run into errors like this, but they tend to be transient, ie the log reader agent crashes, and on restart it works fine.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

ASSIGN TO betrag could not be performed (system error)

Hi Gurus,
Can anybody let me know when we will get the above said Subject error.
I had encountered it in MIGO GR transaction.
Iam pasting the total text of the error below
ASSIGN TO <betrag> could not be performed (system error)
    Message no. M7103
Diagnosis
    A system error has occurred during internal processing by the program.
Procedure
    Contact your system administrator.
Regards
Mohan

Hi ,
Sit with Abaper and process MIGO in foreground it seems something related to program which runs in background during material document generation.
Thanks
Suresh

TS3299 Upgade error: Could not open key: HKEY_CURRENT_USER\SOFTWARE\Apple Inc.\Internet Services. Any advice?

During a standard iTunes upgrade to the latest version (11.1.4 for Windows Vista), the installation failed with the following error message: Could not open key: HKEY_CURRENT_USER\SOFTWARE\Apple Inc.\Internet Services. Does anyone have any advice as to how I can fix this and reinstall iTunes? When I try to open iTunes I get the following message: iTunes.exe. This application has failed to start because MSCVR80.dll was not found. Re-installing the application may fix this problem. When I try to run the installer I get the above error so I'm going round in circles!

Solved: I had somehow lost permission to access the HKEY above (or rather, its parent key HKEY_CURRENT_USER\SOFTWARE\Apple Inc.) so I went to the registry editor and checked the 'Full Control' box for the key and the installer now works.
I used this site to fix the MSCVR80.dll error: http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm

Error "Jurisdiction code could not be determined" in so create bapi

I am using the bapi "SO_NEW_DOCUMENT_ATT_SEND_API1" for creating the sales order,
it gives the error "Jurisdiction code could not be determined" Sometimes there are two juridiction code maintained in the system .
1) During the ship to party address change at sales order , city , country and postal code fields determine the Juridiction codes. Sometimes there are two juridiction code maintained in the system for one city and in such cases BAPI fails to create an order.
2)When the ship to party is foreign country then we do not need Juridiction code in sales order. In such cases also the BAPI fails to create sales orders and writes an error log , saying juridition code could not be determined.
Proposed Soltuion.
We have to modify the BAPI to force the values of ship to address as it is from the text file without exiting the sales order creation.
Thank You,
Ganesh

hi ,
u need to give the right postal address. If it is then it won't give the warning message.
Regards,
Rose.

"Your disk could not be partitioned" "An error occurred while partitioning the disk"

hello, i am operating on a model a1286 mbp mid 2009 laptop, with 4 gb ram 360 gb hdd,
snow leapord updated to maverick,
bootcamped w/ win 7 32-bit
i tried in mac os x maverick to use bootcamp assistant to partition my bootcamp 180 gb partition to be erased and then to start the install of 64-bit.
the partitioning was stuck at about 17 percent for an hour, so i quit the bootcamp assistant - ive seen on reddit this was a bad thing to do, but i did it anyway because i saw someone posted about being to reboot and do a hdd repair then reboot and try to partition again
now when i startup my rEfit program that shows me option of loading mac os x maverick or Bootcamp Legacy Os instead of bootcamp win 7 32-bit
when i tried partioning again its asking me to free up space for 28 gb in bootcamp assistant , i did that, inserted win 7 64-bit dvd install and hit continue dialogue button in bootcamp assistant
this is where i see i only have 145 gb used in mac os x with 18 gb free and in the windows side 14 gb
status partitioning disk,
but then i get an error message saying the partition failed with errors
i googled and saw i had togo into single user mode by pressing cmd-s during boot and typing /sbin/fsck -fy
i got a msg saying this command function is not recognized. - along those lines
how do i reboot and start a repair of the disk?
also i did a repair file permisions in disk utility but forgot to put back the power cord, so the battery drained and i assume the repair file permissions didnt finish and the mbp just auto shutdowned
is there a command i could enter into the EFI shell? or single user mode? to repair the hdd partition in the mac os x maverick and the bootcamp legacy os side since the first time i tried erasing everything on the win 7 32-bit side bootcamp assistant got stuck at 17 percent partitioning then I voluntarily quit the program = now i cant partition bca gives me error of:
"Your disk could not be partitioned" "An error occurred while partitioning the disk"
thanks in advance,
-r

Is that the complete error message? Are you trying to partition the correct drive? It may be that you do not have enough contiguous free space on the drive for the partition.

"A technical error during invocation : Could not invoke service reference" Error message while calling a service from BPM

Similar Messages

Maybe you are looking for