A test question only... (this is an end-user question not an admin one)
You can try responding here if you want.
> The overview page says there are
2677 Audition CS5.5 discussions but only 326 discussions about Audition
3.01 and all earlier versions.
I haven't bothered going
through and looking for/counting everything but surely this is a
mistake. Even if you've deleted thousands of useful discussions on the
earlier stuff, I'm sure I haven't seen 2677 discussions about CS5.5.....
The Audition 3.0.1 and earlier forum is new, split off from the Audition CS5.5 forum. I migrated over the recent threads that were obviously about Audition 3.0.1 and earlier, but there's no easy way to move the whole mess over.
This doesn't impair anyone's ability to search for old threads or use old links to these threads, so this shouldn't actually affect anyone's functional use of the forum.
If (when) older threads are reawakened by someone responding to them, I'll see them and move them over to the 3.0.1 forum.
This is the same thing that we did when splitting the Premiere Pro forums into version-specific forums, and it only took a couple of weeks for everything to settle out.
Similar Messages
-
I Got This message The End user is corrupt
Hello world ,
some user i can access to Discoverer but with one user i cannot ,
i got this message
The End user is corrupt -to connect to this EUL you must drop it and restore it from backup.
ThanksWow, talk about user error! ha!
A few questions.
What version of Discoverer are you on?
Do all users referenced connect to the same EUL?
Has anyone done any manual editing of the EUL tables?
- James -
End User Can Not Open A Form within Responsibility
Hi to all,
I have an end user who tries to click on a form within a responsibility. And the form does not launch. As matter of fact, the browser green progress bar does not show up. There are other forms within that same responsbility that she is able to launch.
This end user was not having this issue before. She was able to launch any forms under any responsibility without any issue.
I tested the same responsbility and same forms on my machine as was able to launch without any issue.
These are the following conditions the end user has:
IE 7
Jinitiator 1.3.1.29
I tried the following steps to remedy the issue:
Cleared cache and cookies.
Clear jar cache
Did not fix the problem
Reinstalled Jinitiator
Did not fix the problem
I turned on the show java console and show exceptions dialog box on end user jinitiator. When I go back and click on the problematic form, no java console shows up, nor does any exceptions dialog box.
Does anyone have an idea, why this may be occurring and how to resolve this issue.
Thanks
F. Lucio
Edited by: Ferreira Lucio on Oct 9, 2009 1:15 AMGreetings Hussein,
I worked on your recommend steps, and still unable to resolve issue:
Try opening the form using your username from the user's machine, and do the same with this specific user from some other machine.
I logged onto oracle with my credentials, and went to the same responsibility and form. This issue happens to me. But when I go back to my local machine. I have no problems.
Did you try using some other browser on the user's machine (for example, Firefox)?
I installed firefox, but everytime I click on a form, it tells me to download jinitiator.
Any recent changes have been done on the user's machine or in the user's profile options?
Unsure what profile options have changed for user
Note: 310961.1 - How To Enable The Java Console Jinitiator 1.1.8 and 1.3
Note: 232651.1 - How to Enable Tracing in Jinitiator
If none of the above helps, obtain FRD and see if you get more details about the error -- See (Note: 150168.1 - Obtaining Forms Runtime Diagnostics (FRD) In Oracle Applications 11i).
I uninstalled jinitiator, then reinstalled. Turned on java console and enabled tracing. Console/tracing does not come up for this form. On other forms it does.
I uninstalled jinitiator a third time. Then reinstalled. What I notice is that jinitiator still has the java console checked and tacing parameters set. What I believe could be happening is the jinitiator is not being uninstalled completely.
Where or how can I check if the jinitiator gets removed completely.
I have check the control panel and jinitiator is not there. I also check HKLM and it is not there also.
Any ideas how to move forward. -
Requestors end users will not acces a site directly and add list items
Hi
i created a site for IT services and this site includes some lists for various services
http://Intranet.com/Units/IT services
main site is http://Intranet.com
and also workflow are configured for these lists for create new item
and only 3 type of users will work on these lists
1)Requestors (Create,View rights)
2)Contributers (Contribute permissions)
3)Approvers
Scenario:
-- Requestors will create list items and approvers will Open this list item and edit list item like
approve and add a Contribute userid in AssignedTO field
---Contribute user also will recieve email and he also Open item and edit ans save this list
so basically its backend , data inserted by requestors will save in lists
so here i need all Requestors end users will not acces IT services site and add list item directly in list.
is any other option availabe that i will provide a diffrent front end page for Requestors at root level site (which is Intranet.com )
and they will add and view only their data, and Contributers also view and edit all users data.
adilHi adilahmed,
You can use two web parts to show the list items for different group.
In the List view page, add another list view web part, set the first web part list view to filter Created By field with Me, second list with all list items.
Then set the first web part with audience Requested group, and second web part with audience Contributers group.
Thanks,
Qiao Wei
TechNet Community Support -
End users are not able to save interactive pdf form created with designer
I am new to using LiveCycle Designer and have created a pdf form but my end users are not able to save edited form. Does this have something to do with whether the form is static or dynamic. If so, I am not exactly sure how to use the restorestate option to convert it back to static. I also tried to enable the "user rights access in adobe reader" under the advance menu and had no luck.
My end users have acrobat reader 9 - do I need them to download anything else, maybe professional.Thanks Paul for your reponse
In my Adobe Pro I don't see the option Reader Extend rather I enabled "Enabled Usage Rights in Adobe Reader" amd I figured this was somewhat the same. So if I enabled this option in Adobe Pro already and they are still not able to edit the fillable text slots or save it what other option do I have in figuring this out. -
Delivery is to be done at the end user location not at the storage location
Hai Gurus.
I have a problem
I am working for a construction industry.. I had a storage location at say" X":. And in case of emergency for the material to the end user at different locations, delivery is to be done at the end user location not at the storage location.. Where to give the end user location address .As delivery address in PO item details will be plant address. pl help
regards
chandrasekharAs i underdstand from your description of issue .You dont want to recive the material in the storage location of your main plant but you want to recive the goods directly to the end user from the vendor.This is typical scenario of Third party PO ..so kindly traise third part PO to vendor ..by changing the item category ...and so the delivery addfres popolutaed in ur PO will be directly from the ship to address from your sales order.rathewr than the storgae location you wd have specified in ur material master
-
LC Rights Management End User can not find groups or users during policy creation process
hello,
I'm using LC8.0.1 turnkey install on win2003 box.
Problem is LC Rights Management End User can not find groups or users (search result is empty) during policy creation process, thus can not apply specific restriction to certain groups or users.
I have create a user in the DefaultDom and assigned the following roles:
Live Cycle Rights Management Invite User
Live Cycle Rights Management End User
How can I allow the above created user to search for groups and user during policy creation? Thanks.Good catch Phuc. Make sure you do this for each Policy Set as well as My Policies.
Here's an overview of Policy Sets:
http://blogs.adobe.com/security/2008/04/delegating_control_over_policy.html
Cut and paste the URL. -
I created a new library so I can use it for just my music, but now my ipod will only sync to my old library and not the new one I created, even though I'm in the new library when I open itunes. Any solutions?
The point is that there are four i product users for one computer in my house, and not everyone wants the same music on their device. Like I said before, the ipod is not syncing to the new library even though I plug it in when the new itunes library is pulled up. It keeps syncing to the old library...
-
I reset my iTunes Security Questions and when I go into the Apple Store to buy a TV Show it is still asking me the old security questions, not the new ones... How do I make iTunes ask me the new security questions?
Get prepared for some bad news, then contact iTS.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
I want to enter the password for a secured wifi network on several iphones. If I do this, is it possible for the end users to somehow extract the ip address and password information and use it from a pc/laptop/other mobile device. For security reasons, I don't want them to be able to to this.
Please advise,
Thanks.If you look at the top left of your screen you will either see a 3G (or 4G if you have AT&T) or you will see the wi-fi symbol. If you don't see the wi-fi symbol you are connecting to Gmail through your cellular data plan, not via wi-fi.
To answer your question, it doesn't happen often but when it does the steps I mentioned above will normally resolve it. Hopefully you won't have any further problem with this. -
Is this really an end user tool?
The documentation that I've read so far describes Discoverer as a reporting and ad/hoc query tool for the end users. True? Is this product usually rolled out to the end users? Is there minimal or substantial training involved?
Thanks!We are using it as such. We've found that users find the tool itself easy to grasp. The harder part is understanding the data and how it's organized. Turning users loose on a relational database was a nightmare. Now that we have a much simplified data warehouse available it works much better, since they can more easily find what they need.
-
How to restrict end-user from not using certain movement-types in MB1B
Dear Gurus,
My client wants that end user has access to only particular movement types in MB1B.i.e only to 311 and 412,421E.
They do not want any other movement types to be access by end-users in MB1B
How to go about this requirement?
Thanks in advance
Regards
Ram
Edited by: RAMKUMAR WARIYAR on Jun 27, 2009 2:14 PMhi,
This is possible you can restrict and allow user for movement type which they can do through any t code.
Contact yours BASIS consultant for that
Regards,
Vishal
Edited by: VS on Jun 27, 2009 5:46 PM -
Hi everyone!
I update my apps a lot, or I modify them (XSlimmer, Trimmit, Monolingual, etc...)...
Therefore, I have TimeMachine that saves me all the old (and heavy) versions of all my apps.
Ho can I get TimeMachine to save only the current (last) version of the apps stored on my internal HD?
Thank you!No no no!
I ment, I have the lastest versions of my apps on my internal HD, but TimeMachine (on an external HD, obviously) saves ALL the versions of them (the older and bulkier ones too, which take space for nothing)...
I'd like to know if I can tell TimeMachine to save only the latest versions of the apps (and not the older ones...)
Thanks -
Okay so first things first this isn't the newest macbook pro. When I open about my mac and go to system report it says it is a Macbook Pro 3,1 and the Boot Rom Version say MBP31.0070.B07. Originally when starting up Boot Camp Assistant there where only two options, the "create windows 7 bootable usb" was not there at all. So after some editing and helpful tutorials I was able to get the option show up and created a bootable usb with windows 7 and downloaded the support software onto a separate flash drive. Finally I did the last step and created a second partition for windows. Once the process is complete my computer automatically restarts.
This is where the problem is. Once my computer makes the booting up sound it doesn't load up windows it gets stuck on a apple logo as if it's trying to reastart normally and can't. So I shut down and this time I hold down the option key during start up. It brings up the main partition and some recovery thing but no windows partiton and no bootable usb.
I forgot to mention that I am running OS X 10.9.3. Okay any body want to help me out? Iv'e been at this for hours and can't get an inch closer to having windows. Please and thank you!
P.S. If I missed a discussion that answer my question just point me to it. Iv'e been looking for a while, but who knows i might have missed one.The only known way to make it work on an external drive is by first installing Windows onto an internal drive, then cloning the install to an external Thunderbolt drive. Thunderbolt is seen as an extension of the internal bus, so Windows doesn't see it as an external device.
-
End user notifications not appearing for Software updates
I'm pushing out security updates to Windows 7 clients. The updates are deploying correctly but some users say they are not seeing any notification that the updates are available or that they are installing - It's set up in the deployment to notify. They
say the first time they know about them is when the machine reboots. On my own machine I always get the notifications, on all the IT users near me we always get the notifications, and on all the test machines I've built I see the notifications. It's possible
my users are just not registering the message before it fades away.
I've made some changes to the Computer Agent, Greater than 24 hours - remind every 3 hours, less than 24 remind every 2 and less than 1 remind every 5 minutes so that may help. What I'm wondering though is there a local log on the client end anywhere that
updates every time a notification appears - I could at least verify it - or is there a local reason why the balloon doesn't show. It's not turned of in a GPO.
Is there any way that the balloon can be replaced with a pop up that the user would have to click OK to clear?Thanks for the reply - I had a look at the logs - here's an example
Adding Open Software Center Menu for Icon Microsoft.SoftwareCenter.Client.Notification.NotifyObjectComplete, because no required item and no reboot are present. (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectComplete at get_VisibleMenuItems)
SCClient 05/11/2014 12:15:55 1 (0x0001)
Setting the current app data (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at HandleNotificationEvent) SCClient 05/11/2014 12:15:55 1 (0x0001)
Verbosity set to low, don't show balloon (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at HandleNotificationEvent) SCClient 05/11/2014 12:15:55 1 (0x0001)
The current visible object is of type Microsoft.SoftwareCenter.Client.Notification.NotifyObjectInstalling with priority Installing (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at HandleCurrentNotifyObject) SCClient
05/11/2014 12:15:55 1 (0x0001)
This object is of type Microsoft.SoftwareCenter.Client.Notification.NotifyObjectComplete with priority Completed (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at HandleCurrentNotifyObject) SCClient
05/11/2014 12:15:55 1 (0x0001)
Removing monitored notification object Microsoft.SoftwareCenter.Client.Notification.NotifyObjectInstalling for app Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2972100)
(Microsoft.SoftwareCenter.Client.Notification.MonitoredNotifyObjectsCollection at RemoveObject) SCClient 05/11/2014 12:15:55 1 (0x0001)
Number of total seconds in countdown is 5400; starting value is 4; seconds til restart is 5396, system will restart at 13:45:54 (utc end time = 13:45:55) (Microsoft.SoftwareCenter.Client.Pages.RestartCountdownDialog at .ctor)
SCClient 05/11/2014 12:15:58 1 (0x0001)
User will be alerted (and hide/close disabled) at 13:15:54 (Microsoft.SoftwareCenter.Client.Pages.RestartCountdownDialog at .ctor) SCClient 05/11/2014 12:15:58 1 (0x0001)
ShowBalloonTip: determining if tooltip should be shown for notification type = Microsoft.SoftwareCenter.Client.Notification.NotifyObjectRestartCountdown (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at ShowBalloonTip)
SCClient 05/11/2014 12:15:58 1 (0x0001)
Notification is for a logoff/restart required or logoff/restart countdown. (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at ShowBalloonTip) SCClient 05/11/2014 12:15:58
1 (0x0001)
Attempting to display the notification balloon with title 'Restart Required' and tooltip 'Recently installed software requires your computer to restart in 90 minutes to complete the installation. No additional software can be installed until your computer has
restarted. '. (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at ShowBalloonTip) SCClient 05/11/2014 12:15:58 1 (0x0001)
The operating system version is 6.1.7601.65536 (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at ShowBalloonTip) SCClient 05/11/2014 12:15:58 1 (0x0001)
This is Windows 7 or earlier, showing notification balloon (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at ShowBalloonTip) SCClient 05/11/2014 12:15:58 1 (0x0001)
NamedTimer: Starting timer timeToAvoidDisplayingTheSameBalloon, interval = 120000, period = -1 (Microsoft.SoftwareCenter.Client.Common.NamedTimer at .ctor) SCClient 05/11/2014 12:15:58 1
(0x0001)
NamedTimer: timeToAvoidDisplayingTheSameBalloon initial interval = 120 seconds, subsequent period = 0 seconds, overall due at 05/11/2014 12:17:58 (Microsoft.SoftwareCenter.Client.Common.NamedTimer at SetTimerInternals) SCClient
05/11/2014 12:15:58 1 (0x0001)
Would that imply that it's set not to show the balloon - except on the reboot?
I had a look at the following policies using wbemtest
DisplayNewProgramNotification
CCM_SoftwareDistributionClientConfig/DisplayNewProgramNotification
CCM_ClientAgentConfig/DisplayNewProgramNotification
and both are correct - DisplayNewProgramNotification set to true
Maybe you are looking for
-
Hi Experts, While doing purchase order or any document, system will not consider Doc rate (OPOR).it consider only Exchange rates and indexes for USD=50 which client not required .client wants only document rate . example-Doc rate=50
-
Space Designer / Surround / & Pops
Could someone please check this out? 1. Open a Logic template... anyone will do (even your own customized autoload etc.) 2. Insert any audio file in the arrange, into an Audio object, preferably start the file on bar 2 (so that there is some space at
-
Hello, I am having an issue and hope you can help me solving it. There is a JAR file from DRAGOS I installed and registered and is working fine and I could see and use the java functions .. so I think I am comfortable with the registration process it
-
yesterday I bought 65$ worth of iTunes music using a iTunes gift card. Then I got these emails saying I am being billed again????? What do I do???? I'm very frustrated with this. Please help me
-
What I mean is, when I am importing from Chrome or another Firefox browser, I want all my bookmarks to be there, yes. Sync is fantastic for that, but for in Bookmarks themselves, I would like to know if website duplicates replace themselves. Example: