A third party soft crashed. I removed the application to the trash, I got rid of every preference, cache and so on (easyFind to fide hidden files). When I reinstall it, it shows the beginning of the license text for 5 seconds and closes automatically.

A third party soft crashed (Episode). When I reinstall  and relaunch it, it opens the window showing the licensing instructions, but only for a few seconds, not allowing me to go further and enter the license number. I did put the application to the trash and remove every trace of it (preferences, caches and even hidden files using EasyFind), zapped the PRAM,  I ran Onyx and disk utility, and reinstalled. And it is still the same. Anyone have an idea ?

As I did this a few times, I tried using Uapp and AppTrap. Just the same. My version of the soft is not an updated one, but the same works well on my office machine, with the same OSX snow leopard.

Similar Messages

  • I bought  my MacBook Pro in 2010. This is the first Mac I have owned and recently it is having some difficulty loading we pages, often timing out. This Mac environment is entirely different for me and I am not sure where to begin troubleshooting/clean-up.

    I bought  my MacBook Pro in 2010. This is the first Mac I have owned and recently it is having some difficulty loading we pages, often timing out. This Mac environment is entirely different for me and I am not sure where to begin troubleshooting and/ or clean-up. I have moderate computer skills and try not to download or access questionable material, however recently I visited the Ap Store and purchased a couple of different aps to use in record keeping and for making a flyer. I am not even sure how to remove these programs to see if it helps.
    Any tips or tricks are appreciated.
    Thank you!

    Time to see about the PRAM battery.
    By the way iOS and OS X are different systems.
    iOS is the operating system for iPads, iPhones, and iPod touch.
    Mac OS X is the operating system for Mac labelled computers.

  • I have all my music cd's on a hard drive as wav files when I try to add them to I tunes the files get there but no album info I end up with a bunch of track 1's by unknown artists. Is there a way to transfer each album over so it shows up like a normal CD

    I have all my music cd's on a hard drive as wav files when I try to add them to I tunes the files get there but no album info I end up with a bunch of track 1's by unknown artists. Is there a way to transfer each album over so it shows up like a normal CD

    Try posting in a more appropriate forum, as this has noting to do with itunes U - the place where University/college/museums post education material.

  • Wen I turn on the my macbook it only show the aple icon and it show like it looding sometink or searching for someting and it never open.

    wen I turn on the my macbook it only show the aple icon and it show like it looding sometink or searching for someting and it never open.

    May need to grab a micro usb cable and restore via iTunes
    http://support.apple.com/kb/HT4367

  • Regarding the article: iTunes Store: Troubleshooting iTunes Match: in my mac iTunes, i don't have a menu option 'view view options'. i do have 'view show view options'. but the resulting popup is different. is this article out of date?

    regarding the article: iTunes Store: Troubleshooting iTunes Match: in my mac iTunes, i don't have a menu option 'view > view options'. i do have 'view > show view options'. but the resulting popup is different. is this article out of date?
    i am troubleshooting iTunes match because it has been days since i uploaded music to mac iTunes and it still has the iCloud status icon for 'waiting'.

    Is there really nobody else with this problem? Really?

  • Where do I find the long text for Damage and Cause in Notifications (IW21)

    Hi ppl,
    Can anyone let me know where the long text for Damage and Cause is stored (can be seen in IW21)?
    Can I retrieve it through FM READ_TEXT? If yes, what are the values of the parameters to be passed?
    Thanks,
    David.

    Hi!
    It is easy to check whether some text is read by "READ_TEXT" or not.
    1) Create text in dialogue mode and save it.
    2) Place brake-point in READ_TEXT FM
    3) go to view this text in transaction again
    If the program is switched to debug mode, it means u can use this FM. Have u tried do this stuff?

  • The hidden files on my macbook air keep showing up!

    The hidden files on my macbook air keep showing up! I use different methodes to hide them, but every time, out of the blue, all those horrible 'windows like' .docs show up. I used Paralles 5 (have deleted it - no change), even updated to Lion, no change.. Deleted MacFuse.. no change... I suspected ThinkerTool, but also that one is gone...  Files most of the time show as soon as I open a desktop folder... HELP anyone??

    Dear People,
    After month I'm still struggeling. Like I said, it is not just a replace True with False sollution. When I hide the 'hidden files' and I copy a file to my desktop, the screen flashes and boom... there are my hidden files again.
    I can keep on hiding them, but they will keep showing up.... what to do?

  • My iTunes library shows all music but there is an exclamation mark to the left on all entries and there is a message stating "original file could not be found" although all music is on the iPad.

    My iTunes library shows all music but there is an exclamation mark to the left on all entries and there is a message stating "original file could not be found" although all music is on the iPad.

    The massage means what it says. iTunes can't find the actual music files. All iTunes has is a database of where the files should be and they are not there.
    Try:
    - iTunes: Finding lost media and downloads
    - Redownloading iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Tried loading the latest version of itunes but the download would not complete. Now when I connect my phone to a usb i get an error stating required files are missing, reinstall itunes. I tried that but the reinstall keeps timing out?

    Tried loading the latest version of itunes but the download would not complete. Now when I connect my phone to a usb i get an error stating required files are missing, reinstall itunes. I tried that but the reinstall keeps timing out?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • I am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in teh dynamic link library SQLite3.dll"

    I am having trouble updating my operatI am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in the dynamic link library SQLite3.dll"  Any ideas what my problem is?

    Hi whatsthe77,
    Welcome to Apple Support Communities.
    You may want to follow the steps in this article to reinstall iTunes:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Have a great day,
    Jeremy

  • Third-Party Apps Crashing After Update

    After getting the new update for my 8GB iPod Touch, I discovered my third-party apps no longer worked--they would briefly seem to boot up before crashing to the desktop. I fixed this problem by restoring my iPod, reinstalling everything, resyncing music (which took several hours). But then when I connected my iPod Touch to charge it, it said it wasn't finished restoring it or something. I said to finish; it soon says the restoration failed with a maddeningly vague error message (-34), some of my third-party apps crash again, and all my music is gone. What is going on, and is Apple taking steps to fix this problem with the new OS? Is there any way to revert to OS3?

    Here is what I did & my phone now works fine:
    Ok.  I went back to the apple store.  They reloaded the IOS6 software from a computer they knew had a good version of the software and treated the phone as if it was a new phone.  We did not back it up from my pervious backups.  I then reloaded all the apps from the app store and not my computer.  My phone is working great now.  It appears I had a corrupted copy of the IOS 6 or a corrupted app that was causing the problem and it syncing just fine without the problem returning.

  • Third party keyboards crashing iMessage

    I have a problem with third party keyboards crashing some apps - most notably iMessage. I am using PopKey, SwiftKey, and Swype (separately) and have tried including and excluding the standard English keyboard.
    Crashing is intermittent and occurs on navigating to iMessage from the home scr. I see this a lot when tapping an iMessage banner notification. iMessage appears, but is completely non-responsive.
    My fix right now is to open running programs and closing iMessage. When I reopen iMessage, all keyboards are accessible and we are back to normal operation.
    Any fix out there? Similar experiences?

    I know, right?!?
    I hear iOS 8.2 will have some bug fixes. It would help if they could sort this one out. Google figured this out 5 years ago...
    I'm actually surprised the feature went out with this many bugs. It really kills the UX.

  • Where has the "Clean up" "Clean up by" option gone for organizing folders? I just upgraded to OS X Maverick today and noticed it was no longer a option when right clicking; also, it is grayed out in the view tab.

    Where has the "Clean up" "Clean up by" option gone for organizing folders? I just upgraded to OS X Maverick today and noticed it was no longer a option when right clicking; also, it is grayed out in the view tab.

    Hi i had this problem myself what you need to do is..
    right click and press 'show view options'
    then go to the arrange by and sort by options near the top and change them both to none
    click save as defult at the bottom
    then when you right click the clean up by options will now be there
    hope this helps

  • I once created an account and changed meanwhile my Apple ID. Now, when trying to log in to iCloud, I get the message: "You are already logged in". I cannot get access to the account in the way, that, for example, the options appear on the right hand side.

    I once created an account and changed meanwhile my Apple ID. Now, when trying to log in to iCloud, I get the message: "You are already logged in". I cannot get access to the account in the way, that, for example, the options appear on the right hand side.
    What can I do?

    Thank you, pvonk, but:
    To be more precise: I am talking about the logging-in within the System Preferences on my iMac.
    When trying to log in with the old ID, I get no access, i.e. it says "Try again"...-Trying the same with the new one gives me the result I mentioned in my first question...
    Now I found out how to do it: I had to erase all accounts-then I could sign in with my Apple-ID. Thanks again.

  • We use a doc template to create a purchased part spec document and then save them as pdf formatted files.  These part spec documents are also appended with the datasheets for these purchased parts.  When we want to update/revise the document, is there a m

    We use a doc template to create a purchased part spec document and then save them as pdf formatted files.  These part spec documents are also appended with the datasheets for these purchased parts.  When we want to update/revise the document, is there a method, using Acrobat, to make those updates to the pdf, or must we go back to the doc template and basically generate a new document?
    Also, our resulting pdf documents aren't searchable.  How can we generate pdf documents that are searchable?  I may want to search for a part value or name within the body of these pdf documents, but currently can't do that...very inconvenient.
    Can you assist?

    Not totally sure about the search issue. A lot depends on how you created the PDF and what is in the datasheets you attached (like are they graphics?). The doc portion should be searchable as long as you used print to the Adobe PDF printer or PDF Maker. For your use, it may be that the print is adequate. However, the result should be searchable (unless maybe you had a form with filled in fields and created the PDF with PDF Maker. I think the form data may be retained in form fields and the fields are not searchable. In that case, a print might be a better procedure. (it would help to know the versions of WORD and Acrobat as well as the exact process you used to create the PDF.)
    If the appended data sheets do not change, then you might try opening the original PDF and then using Replace Pages to replace the file created from the DOC file.

Maybe you are looking for