A totally different project is played when project is played in full screen view and project is not editable

Hi
I have problems with my imovie 09. After several days of work with an imovie project I was again about to start editing my project after startup of my mac. I played through the project and everything seemed fine, but when a movie clip was moved infront of a still picture instead of after, the whole project became uneditable and unplayable. When trying to play the project in full screen mode a totally different project is played. Shutting Imovie and/or the mac down does not help. In some cases I have managed to get the red cursor moving along in my project. However, no movie is played in the screen in the right hand corner, -it is totally black, and the audio is again from a totally different project. I am not able to export the project as all the export options are grey. Some of the other projects worked fine and some did not, -and the functionality seemed a bit random from time to time after rebooting/ exiting and reentering imovie. My first guess would be that this is a memory porblem. However, looking at my activity monitor it seems that I'm only using 1.73 GB of system memory of a total of 4....I have tried remove old projects and also quite a bit of clips in my library to minimize memory use. Now it seems that all the rest of the projects are working fine, but my current project is still corrupt. I have tried copying the first clip of my project into a blank project, but it will only play in full screen mode, not in the screen in the right hand corner.
I am working on a mac mini with 2.26 Ghz intel Core 2 Duo, 4GB 1067 MHz DDR3.
I would be very grateful if anyone out there could help me out...Is my project totally corrupt beyond the point of no repair? Why has this happened, and how is it possible that something like this can happen without any kind of warning?
Thanks!

Thanks for your reply AppleMan1958. Unforunately the playback problem was only experienced in the project described, - all other projects played fine....and I tried a lot of different ways to do it...so I really believe the whole project, including the playback (which did not work in the editing window in the right hand corner either, -nothing was shown there and the red marker line would not move across the project) just suddenly become totally corrupt...However, after deleting the project as described above and installing imovie11 I have done the whole thing over again and completed the project without problems this time.
But thanks for the tip anyway!

Similar Messages

Excel for mac ver14.4.1 screen goes blank when i change to & from full screen view

when i'm working on an excel document, if i am in full screen and hit escape to go non full screen the document goes blank.
if i hit the full screen arrows again, i see my document momentarily and then the screen goes blank again.
i believe this issue began recently after the most recent version update. i must constantly save my documents in case i go in or
out of full screen view and my page goes blank so i don't lose my work. does anyone else have this issue and what can i do about
it? my macbook uses os x ver 10.7.5. not sure if this is an excel problem or an os x problem.
thanks to anyone who can help me figure this out.

Hi，
As your request is relate to Excel for Mac, better to post your issue to the forum below:
http://answers.microsoft.com/en-us/mac
Thanks for your understanding.
Wind Zhang
TechNet Community Support

I-photo. When I click to go full screen it goes fuzzy. Doesnt happen in film show. Help Please!

I photo . When trying to go to full screen it goes fuzzy, Does not happen in film show. Help Please!

Thanks for your help.I have about 3,500 photos in I-photo. None will expand to full screen with out going fuzzy.I also have 400 in Kodac easy share and these are not affected.
About the same time that this happened the icons in the dock lost some of their colour and the system preferences vanished. We managed to reinstate this. Any ideas?
Thanks Ron

What r the trns code for maintenance view, help view and projection view

hi all
what r the transaction code for maintenance view, help view and projection view
can anyone tell me how to create maitenance, help and projection view.
with an example
regs
hari

What is the Different Types and Usage of Views
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
- Projection View (SE11)
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
reward points if it is usefull...
Girish

Some projects won't load full screen view?!?

I have about 10 projects (out of 130) that won't load in the full screen view if I enter the project and then try to enter full screen. The areas around the Aperture program window (menu bar and dock) turn black as if it were in full screen but the program window just sits there doing nothing as if I never clicked to enter full screen. If I try push F to exit full screen, the black disappears but my dock and menu bar do not return. At this point, I can't click on other projects and have to quit the program (just normal command-Q works fine) and re-open it to do anything.
What is strange is that if I click to view all my projects, enter full screen, and then double click on one of them that is giving me this problem, it will load the pictures fine. But it seems to hang up when I try to go to another project and I have to quit the program.
The 10 projects are all pictures taken within a 1 week trip and they include between 50-100 jpeg images each. They were imported into Aperture as part of my iPhoto library. No other pictures that came from iPhoto have this problem.
Things I have tried to fix the problem:
1. Repair permissions on library and system
2. Rebuild library
3. Export originals from iPhoto and import into Aperture as a new project
Any suggestions?
Edited to Add: If I double click a picture so it loads into "Viewer" mode, it seems to enter full screen mode fine when I press F, but the system hangs up and bogs down badly when I try to jump to another problem project from full screen mode. The Activity window says it's loading, but it never does. If I click on anything else, it just continues to say it's loading the first project I tried to switch to.

I have 4 GB of RAM in a 2.2 Ghz Santa Rosa MBP.
I don't believe it's an issue of needing to wait for it to load because it loads other projects perfectly. These 10 projects only have 50-100 jpegs (1.8 MB average file). I can enter and exit projects with 200 RAW files (5 MB average file) with absolutely no delay.
Additionally, it will never load the project. It will say it's loading in the Activity Window but never complete. I can't click to load anything else as the program basically locks up. But it's not really locked because I can Command-Q to exit and it closes properly.

I have just intalled PSElements 12 on a new PC with windows 8.1. It installed ok but when I open it up it displays different than on my windows 7 PC. The buttons and text are tiny and almosy impossible to see even when I drag it to full screen. How do I a

I have just intalled PSElements 12 on a new PC with windows 8.1. It installed ok but when I open it up it displays different than on my windows 7 PC. The buttons and text are tiny and almosy impossible to see even when I drag it to full screen. How do I adjust it to look normal?

Hi Paul ,
It could be a compatibility issue as well as Acrobat 8 is an older version.
Do you get any error message while registering for the product?
Try repairing it and once and also check for updates as well.
Is it happening with all the word files or any specific one'?
Regards
Sukrit Dhingra
Acrobat 8 and Windows 7 Don't Work

Why do my photos get blurry when they are enlarged to full screen from the disc I burn, or played on the t.v.? I set the burn on the highest quality. The photos don't look blurry when enlarged from iphoto on the computer.

Why do my photos that are transferred from iphoto to idvd, and then burned on DVD, look blurry when the idvd is shown full screen on computer or on t.v. They don't look blurry when I enlarge the iphoto pics on the computer. I used the 'prof. quality" encoding setting before burning, and before putting photos on idvd.

Hi
DVD is as standard - only interlaced SD-Video (as on old CRT-TVs) and can never be any better than this.
This is less than a quarter of Your Mac screen resolution.
That's one part of Why You can see High res. on Your Mac - and not on DVD.
Next part is what program is used to make the SlideShow.
If You use iMovie'08 or 09 or 11 - to make it - it too degrades the final result as non of them can deliver interlaced SD-Video to iDVD but only half (every second line in the picture)
I use
• iMovie HD6 or
• FinalCut (any version) or
• FotoMagico™
As they all delivers 100% of what iDVD or Toast™ or DVD Studio Pro or Whatever needs.
Yours Bengt W

Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!

Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!
Anyone can help me?
Thank you, Claudio

Hi Russ, Thank you for your reply!
System Spec:
2x2.26 Ghz QUAD-CORE
12 GB RAM 1066 MHz DDR3
I've stored the library in HARD DISK which is installed inside my computer (1 TB capacity) and different from my hard disk in which I've installed all my applications (600 GB capacity).
I've installed FCP since 2001, bought FCP X in 2012: never had a problem. Yesterday I was editing my video of my last vacations (in California!) and I have updated FCP X, downloading FCP X 10.1.1: then the problem!
Strange is the fact that I've just tried to export a short project, I can see the final product quite well.
What is impossible is playing the clips within Final Cut: they are jumpimg, moving, presenting some frame in green or red ...
Everything all right in iMovie.
I've just checked the RAM: 9GB out of 12 GB is busy, could this be the problem?
Motion is very slow: for 20 sec of project, it takes minutes to play. And once again, if you finalize the projet and export it in Quicktime, you can see it correctly.
I do hope you may suggest something, I'm getting crazy!
Thank you in adavance
Claudio

Want an option to having a REAL full-screen view when in writing mode in Word (as there was in 2003)

For the present Word version (365) I have not found a way to be able to use the entire/total/really full screen estate when using writing mode in Word. (Perhaps there is a way, not discovered by me yet?) But what I want both in Word 365 and foremost in the
next iteration of Word, is the option to choose - when in writing/editing mode - the entire screen real estate, with NO columns on each side of the screen and with NO Ribbon or other stuff on top and nothing at the bottom of the screen either.
This must be possible to establish as an option?!
The Word 2003 had such a feature, but it (completely?) disappeared as an option from 2007 and later, as far as I can see, and this lack of being able to choose using a totally blank screen, from bezel to bezel, with no other things than what you write on
it, is for me and many other writers, who often also use a machine with a rather small screen, a significant missing feature!
As I see it, the real estate that is "given away" to give space to the two vertical columns (to give a for me the unnessary and unwanted "impression/illusion" of having to deal with a sheet of paper placed on the middle of the screen),
this real estate should instead be used as a typing "place". In other words: Many writers and others would really like to be able to use ALL the screen from left to right and from top to bottom to be filled with letters and words!
Can and will this technically be done? So that we again (as in 2003) can be given the option to choose (real) full-screen view?
I would really like to get some positive feedback from developers and decision makers in the Word developer team at Microsoft about the possibility of re-establishing this now seemingly missing option.

Hi,
Thank you for your feedback.
As far as I know, this is currently not available in Office 2013. We are sorry that at this time we are not able to edit documents in a full screen mode that "with NO columns on each side of the screen and with NO Ribbon or other stuff on top and
nothing at the bottom of the screen either. "
We have passed this information to the product group for consideration for a future product or update.
Please be assured that our developers strive to capture Microsoft users' ideas and are working hard to create a more powerful and easy-to-use product.
Thanks for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Why does it crash when i am trying to get a full screen view on my garden of times game?

when playing gardens of time, i have the option of viewing it full screen, when i try to open full screen everything freezes and i have to do ctl/alt delete which then it tells me the adobe plug-in has crashed. i resend the infor and it starts back up, i cannot play the game correctly with 1/2 screen - help!!

Try to disable the hardware acceleration in the Flash Player.
See [[Cannot view full screen Flash videos]]
* http://www.youtube.com/swf_test.html (right-click the player: Settings)
Flash "Display settings" window:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

Colors different in full screen view

I could as well post this under "Mac OS X", but I think here in the Aperture forum it is more likely to get help.
I have the following problem: when viewing images in full screen mode, their colors are different than in the normal windows mode. The difference is not subtle, but severe. For example blue skies have a lot more red and appear much more saturated.
While trying to narrow down this problem I found out the following (and here it starts to get really strange): I exported one image as a JPEG to the desktop to see what the colors would be. The thumbnail then had the oversaturated colors of the full screen view in Aperture. When clicking on it, Preview showed the correct colors with a normal blue sky. When switching to slideshow mode in Preview, again the oversaturated colors from Aperture full screen came up.
When I disconnect my 23" Cinema Display, the full screen view of Preview shows the same colors on my PB like in window mode. So I believe it has something to do with my 23" CD.
Can anybody come up with a good explanation for this behaviour? Could this be some kind of a profile problem?
Any help appreciated
PB G4/1.5 Mac OS X (10.4.6) Aperture 1.1.1

I read Zausel's post that referred to the Colorsync Utility. Under the Devices tab I was able to see both my monitors and confirm they were both assigned the proper profile (they were). There is an option to "Make Default Display" in this utility. I noticed it was defaulting to the Color LCD of the MacBook Pro. I had already set my 23" to my main screen in the display control panel by dragging the menu bar to the big screen in the layout tab. I selected the 23" screen in Colorsync Utility and selected it as the "Make Default Display". Now my full screen previews are accurate. Aperture must use the display profile for normal view screens, thumbnails, light table, but change to the default display profile when it does full screen. (previously, it was using the profile for the 15" MBPro screen for full screen views; thus the inaccurate color) Now everything is in sync and my color looks good on the big display in both normal view and in full screen. Hope this helps someone else.
Ben
MacBook Pro 15 Mac OS X (10.4.6) 2 GB Ram
MacBook Pro 15 Mac OS X (10.4.6) 2 GB Ram
MacBook Pro 15 Mac OS X (10.4.6) 2 GB Ram

I updated my iMac to Mountain Lion and when I want to fit my screen view... in the last version I had to examples where I could choose wide after format but I miss that function now in Mountain Lion. Can anyone please help me???

I updated my iMac to Mountain Lion and when I want to fit my screen view... in the last version I had to examples where I could choose wide after format but I miss that function now in Mountain Lion. Can anyone please help me???

I'm sorry for my bad english, my problem is that I want the program I open in a new window to be avilable in full screen mode. Before I uppdated my os to Montaine Lion I could choose wide under screen in settings. I'll take an ex for you. When I play poker online I want to see the tabel in full screen but I don't manage to fix that. Do you Sir have any idea???

I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. help

I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. I've tried restarting my computer, didn't work. Help!

Well I figured it out, right click the arrow that makes the screen bigger and unclick the Hide Toolbar. I knew it couldn't be that hard.

How can I change the background colour when working on a doc in full screen view (pages)?

Recently I have been working on docs without the distraction of having to see my desktop around my page file by using the full screen view in pages. I do find the contrast to an all black screen too harsh though and it makes my eyes more tired than seeing the clutter of my desktop around the page. Is there any way I can change the background colour?
Any help much appreciated!

When you are in Full screen mode move the cursor up to the top to show the Format bar. Then look to the far right. There you'll see Background and a rectangle. Click on the rectangle and change the colour.
For information on Pages download the Pages User Guide from your Pages Help menu.

When i quit safari in full screen a blue screen appears in background

When i close safari in full screen a blue screen appears in mission. What can i do to fix?

Welcome to Apple Communities
Open Finder, press Option key, select Go > Library, open Preferences, delete com.apple.dock.plist, open Terminal and write:
killall Dock

A totally different project is played when project is played in full screen view and project is not editable

Similar Messages

Maybe you are looking for