A transport package during a BC installation

Hi all,
During and installation of some objects from business content appears a message about including my installation process as a subrequest into already existed request. And then it says that I cannot use that request. But there is no possibility to create a new request. It is automatically included into the old one. Where can I look at to figure out the reason of this? And how can I fix it?
Thanks in advance.
Best regards,
Eugene

Hi Eugene,
A. As it's an old request, and if there's no problem in deleting this request, can you change the owner for this transport request in SE10 (using the icon a/b) to your name and try deleting it? Then you should be able to assign your components during business content activation to a new request that you can create on the fly, or create a blank request beforehand to assign the BC components.
B. Or alternatively can you check this request to see if the "target" is filled in already, one possibility is that this may be a local request and you may need to change this from "local" to "transportable" by specifying the target system.
C. Can you check to make sure your transport management system is functioning properly.
Hope it helps,
Sree

Similar Messages

Iview not selected in the transport package during the export

Hello Expert,
I created a transport package to send the change I made on the iview com.sap.portal.masthead to QA system.
I added correctly the iview to the transport package but when I clicked on the button EXPORT to create the epa file, I found that the iview was not selected.
My change canu2019t be send to QA system.
Any idea how to fix this issue?
Thanks a lot.

Khaled,
You can not transport a standard content as it can overwrite the old version and create a new version of the content.
Refer the below link,
http://help.sap.com/saphelp_nw04s/helpdata/en/26/edee3da7138e5be10000000a114084/content.htm
You can copy a the existing iView , change the id and transport the same. Use the changed iView everywhere instead of the standard ones in this case.
Ram

[SOLVED] Cannot install packages during a fresh installation

Hi all,
I'm pretty sure I'm missing something from the wiki/forums, but I'm at a loss here...
I am going through a fresh installation of Arch. I am using AIF and stopped at step 4 "Prepare hard drive(s)". I intend to install on btrfs, so I went to a different console via ALT-F2, logged in as root and tried installing gptfdisk via "pacman -S gptfdisk". I got a few errors such as:
- error: could not open file /var/lib/pacman/sync/core.db: Failed to open '/var lib/pacman/sync/core.db'
(the rest of the errors pertain to the other available repositories)
I made sure to choose core and extras in AIF's step 1: "Select source".
What completely obvious thing am I missing here...?
Thanks.
Last edited by kcy29581 (2012-03-30 22:05:21)

SS4 wrote:
Did you sync the repositories?
pacman -Syy gptfdisk
You, sir, are a genius and I love you.
Now to figure out how I missed that xD
Thanks!

Transport layer and transport package

I have a fundamental query on transport package and layer.
Objects are classified in packages depending on the project and put in $TMP or test package else they are local ? Only objects belonging to a transport package can be transported , others are not ? How transport package is defined ? All objects must be a part of transport package else can not be transported ?
ABout transport layer, I understand this is used to define which path objects will take during transport particularly when there are multiple transport routes. But what are the advantages of it ? How we can define it (trx code/menu path) ?
Is it mandatory to use transport package and layers ?

Hi Mike,
Just to clarify a few basic concepts:
A transport package (formerly called a "development class", a term you may still encounter) groups related development objects. Whenever you create a new development object (table, program, ...) you have to assign it to a package; the object is then placed into a transport request. Alternatively you can indicate it is a local object (its package is then "$TMP") but such an object is non-transportable.
A transport layer identifies the route that transportable devmt objects must follow. Typically in your system you will have two layers: a layer usually called Zxxx (with xxx = SID of your development system) is used for your own developments. Another layer called "SAP" is used for transporting SAP objects, for example changes to standard SAP code implemented via transaction SNOTE and recorded in repairs. Without the "SAP" layer in place, repairs would be non-transportable.
Each transport package belongs to a layer. You assign the layer when you create a new package in transaction SE80. You can change the layer later on, but this is rarely needed and can cause quite a few side-effects. SAP objects always have layer "SAP". The layers themselves are managed in STMS, under "Transport Routes".
Hope this clarifies things,
Rgds, Mark

[Solved] Error upon selecting "base" package during install process

Hey guys,
I got stuck in the install process. the following issue never occured to be before.
Upon selecting the base package during install and pressing "OK", i recieve the following error:
ERROR: check_is_in needs a non-empty needle as $1 and a haystack as $2!(gote: check_is_in '' 'base')
and that throws me out of the installation process.
A google search on the error message only returned sites where the responsible script is postet.
I am installing arch linux on a lenovo x220, on a seperate ext4 partition.
Any help is appreciated, thanks!
Last edited by replax (2012-11-06 20:30:55)

ArielVoynes wrote:The problem is with mirrors.kernel.org (now that I remember, I've read about kernel.org having trouble with their servers, is this still true?). Just choosing another mirror solves the problem.
I just read through this post and it did fix my issue. However, I do not remember what mirror I selected.
It was a few selections below kernel.org......
Last edited by BradJ (2011-09-20 04:27:17)

Transport Package on EP7

Dear Gurus,
I hav come accross a strange behaviour of portal when i was trying to transport some content form dev to QA portal.
When i added an ivew and a page in a tranport package and exported the epa file to desktop in the transport overview i was able to see on the package but not the ivew and page.
I tried to select the check box of these components but still only package was seen?
now when i imported this epa file i saw nothin in the pcd not even the empty transport package?
what could be wrong ??

Hi,
Could have to do with the fact that the object you try to transport has a namespace prefix that is excluded when transporting.
This protected namespaces is set in pcdStartup.properties file... here is a code snippet of the element it concerns:
# Protected namespaces - objects with these namespace prefixes are never overwritten during import
# CAUTION: do NOT change this property on customer systems
#Pcd.TransportApplication.ProtectedNamespaces = com.sap.portal, com.sap.km
Cheers,
Benjamin Houttuin

Not able to add driver update during Solaris 10 installation on IBM x3550

I am facing a problem with installation of Solaris 10 on IBM x3550.
My question is not specific to IBM server.
I am trying to add SAS driver during Solaris 10 installation. I selected option "Apply device driver update" (option # 4). It is asking to insert driver disk. But only showing floppy (f) and cdrom (c).
IBM server 3550 doesnt have floppy drive and I have the driver image only in a USB stick. Unfortunately, Solaris 10 installation is not showing usb device during driver installation.
Is there any way we can add usb device to the driver update disk list??
Thanks in advance.

Does no one have an idea?

SharePoint Foundation which is installed during TFS 2013 installation has no search capability

I installed a Team Foundation Server 2013 . I opted to install SharePoint Foundation 2013 during the TFS installation on the same application server. The installation went well and everything looked fine. TFS was running and the SharePoint teamsites
were also purring like a kitten.
But then I tried to do a search from the default team site which was created for me. I got the following message:“Your search cannot be completed because no Search
service is available. Contact your administrator for more information.”
I clicked “New” and nothing… nothing happened. No dropdown.
Then I remembered that in order to get your Search Service Application provisioned you have to create it using the configuration wizard in Central Administration.
I started the wizard and when I got to the page where I needed to select the services I want, I saw only 1 service. The Usage and Health Data Collection service.
Anyway i found out that If you choose to install SharePoint through TFS, we will only configure services that you would need
to use for TFS-supported integration features. We do this to conserve resources. Search does not fall into this category, and moreover is one of the largest consumers of memory in SharePoint, so it is not advised to turn it on if you are running
SharePoint and TFS on the same box
Someone can help me maybe and advice what should i do to install the search service? (i don't want to install all things from start and i am not able to do that cause the developers working on the tfs2013 all day.
Eliran

so, as you found, SharePoint's search (especially with SP2013) can be rather resource intensive... previous versions were much smaller in scope, but the SP2013 release includes what used to be the SharePoint 2010 FAST Search... and the FAST search engine
REPLACED all other search engines in SP2013, and as a result is included in the FOUNDATION edition.
Generally speaking, the search "service" includes several components, for crawling content, indexing, and more... each of these components are somewhat resource intensive (see http://www.sbrickey.com/Tech/Blog/Post/On_the_effects_of_memory_limiting_noderunner_exe ,
and be aware that each component can add a few hundred MB of RAM usage).
Additionally, the search index can be DISK intensive (MS recommends at least 500GB for most SharePoint intranet environments).
Finally, the indexing process will of course be somewhat CPU intensive.
So, it is quite understandable that search would be disabled by default, especially if you've got a SINGLE SharePoint server.
Most SharePoint environments that utilize search, have separate servers to provide such processing, without impacting the performance of users that are viewing content via a browser request. This is especially true when you look at SharePoint's Streamlined
Topology approach.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

How to create a new TRANSPORT PACKAGE in BI 7.0

Two issues
1) How to check avaliable TRANSPORT PACKAGES in BI 7.0 and
2) How (steps) to create a new TRANSPORT PACKAGE,So that i can assign all the transport request to that package.
Thanks

Hi,
Steps for creating TRANSPORT PACKAGE
Go to SE80 and in the obj edit mode select Select DEVELOPMENT COORDINATION tab where u can giv ur PACKAGE NAME and create the package
Select your Software Component ,Transport Layer
Package Type = NOT A MAIN PACKAGE and create a request
and save it.
Assign points if useful..
Regards,
NR
Edited by: N R Pradeep Reddy on Apr 10, 2008 11:29 AM

Unable to upload Transport Package in portal

Hi
Previously i have transported .epa file(Trnasport Package) from dev to acc, it worked fine there.now when iam trying to upload the same in qas portal its getting error like "could not upload file" .can any one assist me with the solution

Sekhar,
Please check the transport_logger trace (logs/transport.log) to troubleshoot transport problems.
Set the loglevels to analyze the transport problems debug in the pcdstartup.properties file for the categories pcd.tracelevel.basictransport and pcd.tracelevel.GI.Transport
Please check Note 679516: Central Note for the Transport Package Editor
Please check Note 743857: Upload issues in cluster scenarios
Please examine this file for pure UI problems like the editor does not load or an object cannot be added to a transport package. pcd_admin_tools_logger (logs/pcdadmintools.log)
Hope it helps.
Regards,
Mona

Error while importing Transport Package ?

Hi,
I have created a Transport Package which includes the following things :
1. Two folders
2. Two iViews
3. one .par file
I am trying to Import the above package by choosing the option 'Source for package file - client' and then browsing where my .epa file is placed.
When i click the Upload Button I am getting the following error -
'Error extracting the package file. Check the log file for details'
What can be reason for this error?
Regards,
Vikas Khandpur

Hi Vikas
It is not generally advised to Package a .PAR file into a .EPA file. Because a .PAR file may depend on parts that are not included in the .EPA file which might cause incosistent transports.
You can directly upload a .PAR file into the Portal. Just go to System Administration -> Support -> Portal Runtime -> Administration Console and upolad the .PAR file.
Try removing the .PAR file from the Transport Package and download the exported .EPA file. Import this new file and see if it works this time.
Hope that helped
Best Regards
Priya

Error during Database instance installation of NW04s Portal installation

Hello All,
     This is our system environment:
   Portal - NW04s SR1 (SCS instance on one host) -- finished successfully
   Database - MS SQL Server 2005 on a separate host
We are doing a domain installation. The database was installed successfully, but when trying to install the database instance during the NW04s installation, I am getting the following errors:
<b>ERROR      2007-01-03 11:30:10 [syxxsyshlp.cpp:78]
           syslib::printOSError(const iastring &, int, DWORD, const iastring &, CMessage::eLogMessage) FSL-00001 System call failed. Error 5 (Access is denied.
) in execution of system call 'CopyFile' with parameter (
DCASAPHR05\sapmnt\EPD\SYS\profile\DEFAULT.PFL,
DCASAPHR05\sapmnt\EPD\SYS\profile\DEFAULT.1.PFL, FALSE), line (478) in file (synxcfile.cpp).
ERROR      2007-01-03 11:30:10 [syxxcnode.cpp:402]
           CSyNodeImpl::move(const CSyPath &
DCASAPHR05/sapmnt/EPD/SYS/profile/DEFAULT.1.PFL, ISyNode::CopyMoveMode_t 0x3) FSL-02039 Unable to move or rename node
DCASAPHR05/sapmnt/EPD/SYS/profile/DEFAULT.PFL with type file/directory to
DCASAPHR05/sapmnt/EPD/SYS/profile/DEFAULT.1.PFL: Overlapped I/O operation is in progress.
ERROR      2007-01-03 11:30:10
           CJSlibModule::writeError_impl() MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR      2007-01-03 11:30:10 [iaxxgenimp.cpp:736]
           showDialog() FCO-00011 The step createDefaultProfile with step key |NW_Java_DB|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|6|0|createDefaultProfile was executed with status ERROR .</b>
Could anybody please help me through this process?
Thanks much in advance,
Sunitha

Hi,
I would try adding epdadm and SAPServiceEPD accounts to Administrators group and give Administrators full access to sapmnt shared area. Also double check SAP_EPD_GlobalAdmin domain admin authority and SAP_LocalAdmin and SAP_EPD_LocalAdmin accounts.
Open
DCASAPHR05\sapmnt\EPD\SYS\profile folder using explorer and created file and see if there is any authorzation issues with domail\sapinst account.
good luck
Kondala Rao

HT3986 i get a black screen during windows 7 installation on bootcamp 5.0.1

i get a black screen during windows 7 installation on bootcamp 5.0.1 , it wont install

Hi wb2009,
I haven't found that the TV would be an issue, but did find an article that states to not have extra USB devices connected.
Boot Camp: Windows installation boots to black screen with blinking cursor
http://support.apple.com/kb/TS4536
The Windows installation may boot to a black screen with a blinking cursor. This can occur if you use a USB optical drive or USB Flash drive for the Windows installation and another USB device is also connected to the computer.
There's another article that mentions Windows XP or Vista that may apply.
Archived - Boot Camp: Start up to black screen after installing Windows
http://support.apple.com/kb/TS2600
Thank you for visiting Apple Support Communities.
Nubz

Getting error during the Oracle9i installation "Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"

Hi All,
Getting follwing error during the Oracle9i installation “Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"
u01/app/oracle/product/9.2.0/install/make.log
- Linking Oracle
rm -f /u01/app/oracle/product/9.2.0/rdbms/lib/oracle
cc -L/u01/app/oracle/product/9.2.0/lib/ -L/u01/app/oracle/product/9.2.0/rdbms/lib -o /u01/app/oracle/product/9.2.0/rdbms/lib/oracla
ld:
load_whole_file: Could not malloc 31328. bytes, for /u01/app/oracle/product/9.2.0/lib//libn9.a(asndata.o), didnt attempt to mmap
Stop.
*** Exit 1
While checked the memory details in the machine its showing plenty of free virtual memory.
# ps aux
USER PID %CPU %MEM   VSZ RSS TTY      S STARTED         TIME COMMAND
oracle     1353 0.6 27.2 601M 555M pts/2    S N 09:14:07 5:49.67 /tmp/OraInstall2014-01-21_09-14-02AM/jre/bin/../bin/alpha/native_threads/java -Doracle.installe
root       3033 0.0 0.4 10.4M 7.7M pts/0    R + 10:59:44 0:00.06 ps aux
oracle     1351 0.0 0.0 2.46M 320K pts/2    I N 09:14:02 0:01.36 ksh /tmp/OraInstall2014-01-21_09-14-02AM/installer -Doracle.installer.library_loc=/tmp/OraInsta
oracle     1277 0.0 0.0 2.48M 312K pts/2    I + 09:02:44 0:00.04 -ksh (ksh)
root       1269 0.0 0.0 2.56M 232K pts/2    I    09:01:23 0:00.01 -sh (sh)
root       1268 0.0 0.0 5.31M 768K ??       I    09:01:22 0:00.11 /usr/bin/X11/xterm -ls
root 1 0.0 0.0 608K 96K ?? IL   08:45:31     0:00.08 /sbin/init -a
root 0 0.0 3.9 2.52G 79M ?? R < 08:45:31     0:23.16 [kernel idle]
And I have rebooted the machine still also getting the same error.
Is there any way to resolve this issue??
Regards
prasanta

Pl elaborate the business / technical reason for installing a 15+ year old unsupported software on a 15+ year old unsupported hardware, assuming you are installing an a supported OS version
HTH
Srini

Problem in Importing Transport Package in Quality

Dear All,
I had created an Transport Package on Development Server of EP.
That transport package has got three ivews and one work set and two role.
I downloaded that Transport package ".epa" file on my local machine.
I tried to Import that ".epa" file in Quality Server of Ep i am getting an error "Could not upload file. Check the log files for details."
I need to know how to resolve this problem.
Please help fast.
Regards,
Swapnil Indulkar

Hi swapnil,
Whats the error you are getting in Log file.
once check it provide the details here. and at the time of Exporting in EP Development is it given the sucess message with '0' errors?
Check the log file in <host:portno/nwa-> Monitoring --> logs and traces
Regards
Mahesh

A transport package during a BC installation

Similar Messages

Maybe you are looking for