A tutorial needed for...

I searched the net and found plenty of as2 tutorials for
making a car racing game but none for as3??
anyone know of any good tutorials of such??
thank you

Anyone know of any??

Similar Messages

HT200183 If I wanted to include apple loops in the assets of Logic project folders that are part of a tutorial available for download on a paid educational website would that be ok?

If I wanted to include apple loops in the assets of Logic project folders that are part of a song that follows a tutorial available for download on a paid educational website would that be ok? No one would be paying for the file itself that's part of the membership. I don't want to get into any copyright problems. I understand that they are royalty free and you can include them in your music no problem but the individual loops would be in the audio folder if I saved all the assets to the project file.
Also, would it be ok to include screen shots I take myself of apple programs in my downloadable content?
Just trying to figure out exactly how I should go about it to avoid any legal issues.

Hi
trainedmind wrote:
No one would be paying for the file itself that's part of the membership. I don't want to get into any copyright problems.
My gut reaction is that you may well run into © issues if you re-distribute the original AppleLoops.If your customers are paying for the training, they are also paying for the content you provide, so I feel that you would be re-selling the loops.
Given that anyone who has a copy of Logic would likely have installed all the loop content, there should be no need to distribute them with the project files. Alternatively, make your own loops.
CCT

How Big a Backup Drive is Needed for a 500 GB Internal drive?

I just bought a MacBook Pro (15 inch, mid 2012) with a stock 500 GB internal hard drive. I want to buy a USB 3.0 external drive for a Time Machine backup drive.
Bearing in mind that I don't keep photos or any significant quantities of big visual media (movies, etc.) on my Macs, it will take several years to even fill my internal drive halfway.
How large an external drive do I need for a backup? One vendor has suggested 1 TB, but I wanted to check with the community before purchasing.

See Time Machine - Frequently Asked Question #1.
You also might want to review the Time Machine Tutorial, and perhaps browse the rest of the FAQs.

What version of ACR do I need for my Sony A37 for Elements 6 ?

I am having a problem finding the version of ACR I need for my Sony Alpha37 - I use Elements 6

For the SLT-A37 you have two alternatives:
(1) Upgrade to PSE 11. (2) Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
Windows download click here DNG Converter 7.3
Mac download click here DNG Converter 7.3
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

AXL: How to find fields needed for AXL command?

Hey guys,
i want to configure my CUCM via AXL and did a tutorial for add Translation Patterns. There are all the fields like blockEnable, networkLocation, routeFilterName, newPattern and so on.
But how can i find ou which field i need for other operations like addRoutePattern or addRoutePartition ?
Best Regards
Daniel

Hello again Daniel
You need two things:
1) Grab a copy of the AXL schema from your CUCM - go to http://developer.cisco.com/, then select AXL in the drop down on the right hand column. Once there, hit 'documentation'. Grab the AXL schema download, and while you are at it grab the database schema and XML admin guide.
2) If you arent' clear on the fields/values, then instead of trying an 'add' first, create a route pattern normally in the GUI. Then do a 'getRoutePattern', and look at the XMl that is returned to see what fields are and what values can be entered.
Regards
Aaron

A good video tutorial series for Flash?

Hello All,
I'm a teacher and I'm looking for a good tutorial series for
Flash. I don't want a web site subscription I need something I need
a video/dvd/CDRom series that I can purchase with a purchase order
(no credit cards). Any suggestions?
Thank and have a great day!
Todd
MrBenrud.com

Mr. Benrud,
> I'm a teacher and I'm looking for a good tutorial series
for Flash.
Lynda.com
> I don't want a web site subscription I need something I
need a
> video/dvd/CDRom series that I can purchase with a
purchase
> order (no credit cards). Any suggestions?
While Lynda.com's least expensive option is their Online
Learning
Library, which *is* a subscription service, they also sell
their video
tutorials on CD.
David
stiller (at) quip (dot) net
Dev essays:
http://www.quip.net/blog/
"Luck is the residue of good design."

Help needed for writing query

help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2           02           Computer Science
3           03           Physics
4           04           Chemistry
5           05           Mathematics
7           07           Commerce
8           08           Computer Applications
9           09           Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383           S1      9           4           2           3
384           S2      4           2           5           3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383           S1
384           S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1               383          9
2               383          4
3               383          2
4               383          3
5               384          4
6               384          2
7               384          5
8               384          3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
383     S1     Biology Chemistry      Computer Science Physics
384     S2     Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID     subjects
383           Biology,Chemistry,Computer Science,Physics
384           Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --Pradeesh

Well I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say.

XMLAGG structure, performance help needed for odd nesting in schema

Hello,
I have to produce XML to look like:
<?xml version='1.0'?>
<enterprise>
    <membership>
      <sourcedid>
        <id>PHYS_101_001_FA2007</id>
      </sourcedid>
    
    <member>
      <sourcedid>
        <id>D2LU0001</id>
      </sourcedid>
      <role roletype="Sample Role">
        <status>1</status>
      </role>
    </member>
    <member>
      <sourcedid>
        <id>D2LU0002</id>
      </sourcedid>
      <role roletype="Sample Role">
        <status>1</status>
      </role>
    </member>
</membership>
</enterprise>This would be straightforward if the schema allowed for a "<members>" tag under which to nest the <member> tags. But, it does not allow for that tag or any other than those listed above.
I have a query which does produce that output (except for the roletype attribute), but its performance is horrible; it takes about 40 minutes to return data:
SELECT
     XMLROOT(
         XMLELEMENT("enterprise",
           XMLAGG(
             XMLELEMENT("membership",
               XMLFOREST( XMLELEMENT("id",cx.mapped_course_id) as "sourcedid"
               (SELECT XMLAGG(
                 XMLELEMENT("member",
                   XMLFOREST(XMLELEMENT("id",spriden_id) AS "sourcedid",
                             XMLELEMENT("status",'1') AS "role"
                  FROM enrollments_fall_sfrstca efs
                     , spriden sp
                     , gzv_tuid t
                 WHERE sp.spriden_change_ind IS NULL
                   AND sp.spriden_pidm       = t.pidm
                   AND t.tuid                = efs.user_name
                   AND efs.mapped_course_id = cx.mapped_course_id
                   AND efs.term              = cx.semester
            , VERSION '1.0', STANDALONE NO VALUE)
FROM courses_xt cx
WHERE cx.semester = :term_code
;Similar queries are producing courses and users XML fine with no performance issues, but these are driven off either the courses view or the enrollments view, but not both.
Is there some other way I can produce the nesting I need for the vendor's schema?
The source views are basically as follows (showing relevant columns only):
courses_xt:
MAPPED_COURSE_ID       SEMEST
AVFT209-13307-201210   201210
AVFT210-13308-201210   201210enrollments_fall_sfrstca:
MAPPED_COURSE_ID       USER_NAME
AVFT209-13307-201210    FULLERC8
AVFT209-13307-201210    SHUPEK
AVFT209-13307-201210    NOMAN
AVFT210-13308-201210    SHUPEK
AVFT210-13308-201210    PELLONMWhen I have the query without the XML (with the subquery as a column of the outer query), this returns the correct data quickly (a couple of minutes).
I have tried various permutations of XMLFOREST, XMLELEMENT, XMLAGG but either I get syntax errors, or the data is wrong (e.g. repeated '<membership>' for each '<member>', or I have to create an invalid tag '<members>' to be filtered later).
Please advise!
Thanks,
Anita Lees

Hi Anita,
Have you tried with a GROUP BY and no subquery?
Here's an example using SCOTT schema.
I've used the same tag names and structure so that you can see the analogy :
SELECT XMLElement("enterprise",
         XMLAgg(
           XMLElement("membership",
             XMLElement("sourceid", xmlelement("id", d.deptno))
           , XMLAgg(
               XMLElement("member",
                 XMLElement("sourceid",
                   XMLElement("id", e.empno)
               , XMLElement("role",
                   XMLAttributes(e.job as "roletype")
                 , XMLElement("status", '1')
FROM scott.dept d
     LEFT OUTER JOIN scott.emp e ON e.deptno = d.deptno
WHERE d.deptno IN (10,20)
GROUP BY d.deptno
;which gives :
<enterprise>
<membership>
    <sourceid>
      <id>10</id>
    </sourceid>
    <member>
      <sourceid>
        <id>7782</id>
      </sourceid>
      <role roletype="MANAGER">
        <status>1</status>
      </role>
    </member>
    <member>
      <sourceid>
        <id>7934</id>
      </sourceid>
      <role roletype="CLERK">
        <status>1</status>
      </role>
    </member>
    <member>
      <sourceid>
        <id>7839</id>
      </sourceid>
      <role roletype="PRESIDENT">
        <status>1</status>
      </role>
    </member>
</membership>
<membership>
    <sourceid>
      <id>20</id>
    </sourceid>
    <member>
      <sourceid>
        <id>7369</id>
      </sourceid>
      <role roletype="CLERK">
        <status>1</status>
      </role>
    </member>
    <member>
      <sourceid>
        <id>7902</id>
      </sourceid>
      <role roletype="ANALYST">
        <status>1</status>
      </role>
    </member>
    <member>
      <sourceid>
        <id>7566</id>
      </sourceid>
      <role roletype="MANAGER">
        <status>1</status>
      </role>
    </member>
</membership>
</enterprise>

MSI ti 4200 128 MB and Problems with "Need for Speed: HighStakes"

Does any one know of a fix for "Need for Speed: HighStakes" with the new 45.32 drivers. When trying to start this game it won't even load, the screen goes dark for a second and then falls back to the desktop. Did the same thing with 43.45, but if I install the drivers that came with the Video card ( I think they were 31.XX) then the game works fine. Haven't come across any other games that won't run except this one, some examples that work fine are UT 2003, C&C: Generals, Warcraft 3, Hot Pursuit 2.
System:
XP pro OS (sevice pack 1) DirectX 9
Athlon 1800
512 MB RAM
MSI nforce 2 Main board
MSI GeForce 4 4200 ti 128 MB 8X AGP
Thanks for any info.

well I "bugged" the game makers (EA) and the response is that the game doesn't suport Windows XP. Strange that the older nVidia 31.xx drivers work fine with the game. Also played it on my last machine which had XP and a ATI radeon video card. OH well who ever said Direct X was supposed to be backward compatible.
Too bad the older drivers don't work so well with the newer games.

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no softwar

hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no software available for me . please help . mr frustrated

If your computer is running an OS X prior to Snow Leopard 10.6,
the answer (if it is an Intel-based Mac; not old PowerPC model)
would be to buy the retail Snow Leopard 10.6 DVD from Apple
for about $20, and install it. Then update that to 10.6.8 by using
the installed Snow Leopard online to get Combo Update v1.1 for
Snow Leopard 10.6.8. After that is installed & updated, run the
system's Software Update again, to see what else is available to
that system.
Later systems can then be looked into at Mac App Store, once
the computer is running Snow Leopard 10.6.8.
And if your computer is a Power PC (G4/G5, etc) and has no
Core2Duo kind of CPU -- See "About this Mac" in apple menu
to disclose the general info about your Mac. Also you can see
even more by clicking on "More Info" when looking in there...
If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
Hopefully this helps.
Good luck & happy computing!

Can i use my creative cloud membership on laptop and desktop? Or is one membership needed for each device?

Can i use my creative cloud membership on laptop and desktop? Or is one membership needed for each device?

Yes you can!

I have an ipod touch 4g. I want to use our internet hdtv as a monitor so others can see my screen in 40". Sony guy said that can do it wirelessly through the internet router instead of Hdmi without the need for an apple tv.Is this true and how do I do it?

As I said above, I want to view my iPod screen on our new 40" Sony Internet full HD TV.
I know that you can do this via HDMI but a Sony guy said that you should be able to do this wirelessly by going through the router. Is this true and can I do this without the need for the Apple TV?
We are soon going to get the airport extreme, so will it work with that?

1. Is it a smart TV?
2. If so.... Is the TV connected to the Internet?
3. If it is.... Check if your iPod and your TV share the same IP address (Wi-Fi network)
4. If they do.... Then you should go to wherever your "Other Media" tab is.
5. After that.... Search for you iPod. Because it is connected to the same network, it should recognize the device they same way AirPrint does.
6. If you happen to see this fail, then try this method:
1. Do you have a Bluetooth-enabled computer/laptop?
2. If so.... Enable the bluetooth on the computer/laptop as well as your iPod.
3. After that.... Your iPod should be actively searching and it should find the computer/laptop.
4. If it did.... Transfer the file onto Windows/Mac (preferably Mac) and find the program to open the file.
5. After doing so.... Connect your computer/laptop to the TV via HDMI Output Cable.
6. Now it should work!

How many Licenses of Acrobat Professional do I need for Adobe LC PDF Generator

Hi,
At our customer site we have purchased 6 licenses of Adobe LiveCycle PDF Generator and have recieved a license file with the keys for Adobe LiveCycle PDF Generator and Adobe Acrobat Professional. We bought the license from a reseller of the product. We understand that the Adobe LiveCycle PDF Generator is a server based software and needs 1 license per CPU. Each of our server (Dev, Val & Prod) have 2 CPU's so we have sufficient licenses (6). We are under the impression that this would suffice. How ever we are not sure on how many licenses we need for Acrobat Professional.
Here is a brief description of the way we would use Adobe LiveCycle PDF Generator. We are deploying a PLM system and one of the requirement is to render Word documents to PDF so we are using PDF Generator for this capability. On our Adobe servers we will install Microsoft Word, Acrobat Professional V9 Extended and the Adobe Livecycle PDF Generator. We will have around 150 users for the PLM system being deployed. The PLM system is a Web based system which means the PLM application server will be running on a Solaris server in our case. As part of the workflows in the PLM system, at the end of the workflow process, the PLM server would trigger a request to the Adobe server to convert the word document to PDF. The Adobe server processess the request and returns the PDF file that gets generated.
Based on the above usage of the system how many licenses of Acrobat Professional do we need? We will be installing Acrobat only on the server where we install the Livecycle PDF Generator. We had a call with our purchasing person today and she cautioned us that for Adobe Acrobat Professional we might need 1 license per user of the PLM system. She has asked us to check this with the Vendor of the product. Somehow I don't think it makes sense to purchase so many Acrobat Professional licenses even though we install only once.
So can someone tell me How does the licensing for Adobe Livecycle PDF Generator work? How many Acrobat Professional licenses we actually need? Is it based on the number of users in the system that is triggering the request? Appreciate your response on this.
Regards,
Ragha

You really should talk to your Adobe Sales Rep about this. There are all kinds of special deals, licenses and such for customers using LiveCycle. (For instance the license for PDFG may include Acrobat licenses for certain uses).

Temporary wim-files for multicast transmissions still needed for WDS installation in Server 2012 R2?

Acording to
https://technet.microsoft.com/en-us/library/dn281955.aspx one of the new features for WDS in Server 2012 R2 for multicast is:
Improved multicast deployment by eliminating the need for making a local copy of the install.wim file. You can apply the install.wim file while it is being downloaded without significant impact to the application process.
However, this doesn't seem to be activated by default and I still get the following error when installing one or more machines using multicast:
"Windows Setup cannot locate a valid hard drive to store temporary installation files." However, once I remove Multicast from this install image, it installs without any problems at all.
I have also noticed that while multicasting, the installation will use the "Copying Windows files" phase, while downloading and copying the install.wim (or whatever name it is) locally on the hard drive first, so this will require lots of space.
So the question is, how do you enable this new feature that should be a part of WDS in Server 2012 R2???

Full version:
Following steps could help enable the feature:
1. Mount the boot image using dism.
e.g.
>dism /mount-wim /wimfile:c:\remoteinstall\boot\x64\images\boot.wim /index:2 /mountdir:c:\mount
2. Create a metadata file if no existing one. The metadata file should be in mountdir from the first step under mountdir\sources. And the file name should be: WdsClientMetadata.txt
3. Add entry to the metadata file: WDS.Client.Multicast.WIM.Streaming.Enabled=true
4. Save changes and unmount the boot image
e.g.
>dism /unmounts-wim /mountdir:c:\mount /commit
Sorry for the late reply, but I had to test this thoroughly since I didn't get it working right away. I tried both the regedit you first mentioned, and later also creating a textfile in the "/index:2 boot.wim", both without any success. I noticed
that creating the sources\WdsClientMetadata.txt with the data "WDS.Client.Multicast.WIM.Streaming.Enabled=true" gives me an error upon booting into WDS as follows (EUFI/IPv6-boot):
Same happens if I boot using IPv4 (an non-UEFI boot), except that there would be a plain IPv4-address instead in the error msg. Just for troubleshooting I tried writing WDS.Client.Multicast.WIM.Streaming.Enabled=false in the file instead, and WDS would throw
me the exact same error message. Once I delete the file sources\WdsClientMetadata.txt from the WDS/Boot image, the client boots ok, both for IPv4/IPv6. Disabling the firewall on the WDS didn't help, so something in the configuration is still missing? I'm getting
to a dead end here, and I suppose you're all out of advice on this one?
Thank you Shaon Shan for your great effort so far.

A tutorial needed for...

Similar Messages

Maybe you are looking for