A two machine cluster

I found this tutorial and followed it. http://vimeo.com/1799266
Only problem is it doesn't work for me.
My two machines are connected via ethernet. I've set up the qmaster system preferences as per video. Qmaster admin shows them up as twice as many machines as there are in the bottom panel. Also I can't select a controller.
Both machine on same OS. I have run the compressor repair app minus the preference delete.
In previous attempts I was able to set up a cluster and even see it in compressor but it either failed or would only run the local machine and the other sit idle.
Help please someone?

Thanks so much for this response. I exported a reference QT movie retaining my markers and indeed it appeared to work. The messages told me that everything was successful but upon playing the transcoded videos it was obvious it hadn't worked. Both HD and SD versions had long segments of either total white or total green bars. As it seems that compressor splits the video into segments and then reassembles it(?) I'm guessing that means that one of the nodes simply didn't do its job. It didn't do its job twice so again I'm left scratching my head. Would love it if anyone has any suggestions.

Similar Messages

Solaris Cluster - two machines - logical host

Good morning!
I am a complete dummie Solaris Cluster, buuuuuuuuuuuuuuuuuuuut... I need to create a cluster and install an application:
I have two V440, with Solaris 10;
I need to put the two machines in the cluster;
I have CE0 of each of the machines plugged into the network;
I have CE1 and CE2 of each machine connected together via a crossover cable;
According to the documentation "Oracle Solaris Cluster HA for Alliance Access" there are prerequisites (http://docs.oracle.com/cd/E19680-01/html/821-1547/ciajejfa.html) as creating HAstoragePlus , and logical host resource group;
Could anyone give me some tips on how to create this cluster and the prerequisites?
tanks!
Edited by: user13045950 on 05/12/2012 05:04
Edited by: user13045950 on 05/12/2012 05:06

Hi,
a good source of information for the beginner is: http://www.oracle.com/technetwork/articles/servers-storage-admin/how-to-install-two-node-cluster-166763.pdf
To create a highly available logical IP address just do
clrg create <name-for-resource-group>
clrslh create -g <name-for-resource-group> <name-of-ip-address> # This IP address should be available in /etc/hosts on both cluster nodes.
clrg online -M <name-for-resource-group>
Regards
Hartmut

Do I need 3 machines for Sun Two-Node Cluster HA for Apache?

The vendor is trying to set up a Sun Cluster HA for Apache and said it requires a dedicated machine
for monitoring purpose(The Sun Cluster HA for Apache probe??). Is this monitoring machine mandatory and have to be dedicated for that purpose? And can I use 1 machine to monitor more than 1 cluster? Because the vendor requires 2 extra machine to monitor 2 set of 2-node cluster..and the document I read from Sun only mentions the 3rd machine is required for admin console.
Also, if I only have 2 node cluster, can I configure Apache as a scalable + failover service at the same time or I have to choose either one? Thanks!!

Incorrect. You can set up a Solaris Cluster on a single node if you wish although two nodes give you redundancy. The probe for Apache runs from the node on which Apache is executing.
If you have a two node cluster you could have multiple implementations of Apache: fail-over and scalable. You can mix them until you run out of resources: CPU, networking bandwidth, IP addresses, etc.
Tim
---

Cluster with only two machines.

          Hi all,
          Can I make in weblogic6.0 a cluster with two machines. One Aministration and the
          other managed ?????
          regards, Juan.


Is'nt there a restriction for running All WLS cluster machines on the same
          port ?
          Or is it just for the Mged Servers ...
          "Cameron Purdy" <[email protected]> wrote in message
          news:3d1e1d61$[email protected]..
          > Not exactly. You'll run a managed server on each of those on the same port
          > number, and on one of them you'll run the admin server on a different
          port.
          >
          > Peace,
          >
          > Cameron Purdy
          > Tangosol, Inc.
          > http://www.tangosol.com/
          >
          > "Juan Alonso" <[email protected]> wrote in message
          > news:3d1ca2d8$[email protected]..
          > >
          > > Hi all,
          > >
          > > Can I make in weblogic6.0 a cluster with two machines. One Aministration
          > and the
          > > other managed ?????
          > >
          > > regards, Juan.
          >
          >

Testing ha-nfs in two node cluster (cannot statvfs /global/nfs: I/O error )

Hi all,
I am testing HA-NFS(Failover) on two node cluster. I have sun fire v240 ,e250 and Netra st a1000/d1000 storage. I have installed Solaris 10 update 6 and cluster packages on both nodes.
I have created one global file system (/dev/did/dsk/d4s7) and mounted as /global/nfs. This file system is accessible form both the nodes. I have configured ha-nfs according to the document, Sun Cluster Data Service for NFS Guide for Solaris, using command line interface.
Logical host is pinging from nfs client. I have mounted there using logical hostname. For testing purpose I have made one machine down. After this step files tem is giving I/O error (server and client). And when I run df command it is showing
df: cannot statvfs /global/nfs: I/O error.
I have configured with following commands.
#clnode status
# mkdir -p /global/nfs
# clresourcegroup create -n test1,test2 -p Pathprefix=/global/nfs rg-nfs
I have added logical hostname,ip address in /etc/hosts
I have commented hosts and rpc lines in /etc/nsswitch.conf
# clreslogicalhostname create -g rg-nfs -h ha-host-1 -N
sc_ipmp0@test1, sc_ipmp0@test2 ha-host-1
# mkdir /global/nfs/SUNW.nfs
Created one file called dfstab.user-home in /global/nfs/SUNW.nfs and that file contains follwing line
share -F nfs –o rw /global/nfs
# clresourcetype register SUNW.nfs
# clresource create -g rg-nfs -t SUNW.nfs ; user-home
# clresourcegroup online -M rg-nfs
Where I went wrong? Can any one provide document on this?
Any help..?
Thanks in advance.

test1# tail -20 /var/adm/messages
Feb 28 22:28:54 testlab5 Cluster.SMF.DR: [ID 344672 daemon.error] Unable to open door descriptor /var/run/rgmd_receptionist_door
Feb 28 22:28:54 testlab5 Cluster.SMF.DR: [ID 801855 daemon.error]
Feb 28 22:28:54 testlab5 Error in scha_cluster_get
Feb 28 22:28:54 testlab5 Cluster.scdpmd: [ID 489913 daemon.notice] The state of the path to device: /dev/did/rdsk/d5s0 has changed to OK
Feb 28 22:28:54 testlab5 Cluster.scdpmd: [ID 489913 daemon.notice] The state of the path to device: /dev/did/rdsk/d6s0 has changed to OK
Feb 28 22:28:58 testlab5 svc.startd[8]: [ID 652011 daemon.warning] svc:/system/cluster/scsymon-srv:default: Method "/usr/cluster/lib/svc/method/svc_scsymon_srv start" failed with exit status 96.
Feb 28 22:28:58 testlab5 svc.startd[8]: [ID 748625 daemon.error] system/cluster/scsymon-srv:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Feb 28 22:29:23 testlab5 Cluster.RGM.rgmd: [ID 537175 daemon.notice] CMM: Node e250 (nodeid: 1, incarnation #: 1235752006) has become reachable.
Feb 28 22:29:23 testlab5 Cluster.RGM.rgmd: [ID 525628 daemon.notice] CMM: Cluster has reached quorum.
Feb 28 22:29:23 testlab5 Cluster.RGM.rgmd: [ID 377347 daemon.notice] CMM: Node e250 (nodeid = 1) is up; new incarnation number = 1235752006.
Feb 28 22:29:23 testlab5 Cluster.RGM.rgmd: [ID 377347 daemon.notice] CMM: Node testlab5 (nodeid = 2) is up; new incarnation number = 1235840337.
Feb 28 22:37:15 testlab5 Cluster.CCR: [ID 499775 daemon.notice] resource group rg-nfs added.
Feb 28 22:39:05 testlab5 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<5>:cmd=<null>:tag=<>: Calling security_clnt_connect(..., host=<testlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Feb 28 22:39:05 testlab5 Cluster.CCR: [ID 491081 daemon.notice] resource ha-host-1 removed.
Feb 28 22:39:17 testlab5 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<5>:cmd=<null>:tag=<>: Calling security_clnt_connect(..., host=<testlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Feb 28 22:39:17 testlab5 Cluster.CCR: [ID 254131 daemon.notice] resource group nfs-rg removed.
Feb 28 22:39:30 testlab5 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_validate> for resource <ha-host-1>, resource group <rg-nfs>, node <testlab5>, timeout <300> seconds
Feb 28 22:39:30 testlab5 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_validate>:tag=<rg-nfs.ha-host-1.2>: Calling security_clnt_connect(..., host=<testlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Feb 28 22:39:30 testlab5 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_validate> completed successfully for resource <ha-host-1>, resource group <rg-nfs>, node <testlab5>, time used: 0% of timeout <300 seconds>
Feb 28 22:39:30 testlab5 Cluster.CCR: [ID 973933 daemon.notice] resource ha-host-1 added.

How to install Enterprise manager on two node cluster

Hi,
I am new to Oracle working on 10g
can anyone post a document or link for step by step installation of oracel 10g enterprise manager on a two node cluster?
Thanks in advance.

userArshad wrote:
Thanks Hans.
To be specific I have to install Database control .that means I need to use the GUI .
Also I could see database control and DBconsole service on on 1st node but I cannot find that in 2nd node.That is the normal configuration - you use the DB Control from node 1 and it gets the information using the agent on Node 2. The DB Console then displays the information for both nodes.
Please note that the DB Control will place a relatively heavy load on each machine, which is why we want to restrict our load to the agent. It is for that reason that we prefer to use the Grid Control whenever possible - it provides the same mechanism and screens, but the JEE platform is on a separate machine and all you have on the RAC nodes is the agent.
But if you really want to run the DB Console from each node (again, not normally needed) you need to use emca to configure it on the second node. Metalink note 863631.1 should help you with that.

Internet load balancing with two machine (NLB)

i have install two TMG 2010 and one is manger and one managed , but seems once manager down , other server not passing the traffic with vip , my question is does it supported like NLB with two machine ?

Hi,
Coud you confirm you can ping sucecssfully both of two machine before?
To check if the NLB status is green:
In the Forefront TMG Management console, in the tree, click the Monitoring node.
In the Alerts tab, check that NLB Started for each array member.
In the Network Load Balancing Manager (nlbmgr), check the status of the current node for all clusters define. Repeat this for each member.
Run nlb display to view the current state of the NLB cluster and hosts. Repeat this for each membe
http://technet.microsoft.com/es-es/library/ff849728.aspx#s3
Best Regards
Quan Gu

Regarding install of obiee11g on two machines Should be part of same domain

Hi Experts,
Actually we need a requirement like this i.e
I want to install obiee 11g on two machines
Should be part of same domain
But want to run only one service on one host
Like bi server on one host
And presentation on another host
Can any one please help on this
Thanks in Advance,
Siva Shankar

Hi,
you can get all the info the installation and configuration guide.
Here´s the link:
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31765.pdf
http://gerardnico.com/wiki/dat/obiee/installation_11.1 -- Step by step install obiee plese refer this link .
Weblogin install steps._
http://www.togotutor.com/weblogic/windows-weblogic-10-3-4-installation.php -- please refer the below link step by step with screen shot.
Cluster steup:_
You have to modify below config files OBIEE 11g clustering setup.
1. Nqsconfig
2.Nqsclusterconfig
3.odbc.ini
4.web.xml
5.instanceconfig.xml
Please refer the below links.
http://www.rittmanmead.com/2010/07/obiee-11gr1-scaleout-clustering-and-high-availability/
Please send me your mail id I will provide obiee installation link on my blog -- in this blog step by step is ther how to install obiee.
Hope this help's
Thanks
satya

MDB in two machines problem.

          Hi all,
          I have two machines one administration and the other managed. I have targeted a topic
          to the admin server, and i need to deploy a MDB in both server, How can i do it ?
          note: the topic cannot be deploy in multiple servers. I'm using weblogic6.0 sp2.
          When a client sends a jms message I need that only one MDB catch it. I think in cluster
          but i only have two machines.
          regards, Juan.


          Juan Alonso wrote:
          > Hi all,
          >
          > I have two machines one administration and the other managed. I have targeted a topic
          > to the admin server, and i need to deploy a MDB in both server, How can i do it ?
          >
          There are WebLogic extensions that allow specifying the JNDI URL and the connection
          factory name that an MDB uses. Not sure what they are named.
          >
          > note: the topic cannot be deploy in multiple servers. I'm using weblogic6.0 sp2.
          >
          > When a client sends a jms message I need that only one MDB catch it. I think in cluster
          > but i only have two machines.
          >
          Topic messages are replicated to each subscribing MDB pool. So if two pools
          subscribe to the topic, they will each get a copy of each topic message. If you
          want queue like behavior (no replication), replace the topic with a queue, or create an
          extra
          MDB that forwards a subscribption into the queue.
          >
          > regards, Juan.

Using Lightroom Cloud to Sync Catalog Between Two Machines

I have use of so many cloud services including the 20gb that Adobe gives me. Is there a way i can sync my catalog on the cloud so that i can have all my metadata on both my laptop and desk top? I also have 300gb of cloud storage though Copy. I would just like some recomendations on how best to go about it. Thanks

Hi Pat,
Using Lightroom Cloud to Sync Catalog Between Two Machines
If you’re running Lightroom on a laptop during your location shoots, you might want to take all the edits, keywords, metadata, and of course the photos themselves, and add them to the Lightroom catalog on your studio computer. It’s easier than it sounds: basically, you choose which catalog to export from your laptop, then you take the folder it creates over to your studio computer and import it.
You need to decide whether you want to export a folder (all the imported photos from your shoot), or a collection (just your Picks from the shoot). In this case, we’ll go with a collection, so go to the Collections panel and click on the collection you want to merge with your main catalog back in your studio. (If you had chosen a folder, the only difference would be you’d go to the Folders panel and click on the folder from that shoot instead. Either way, all the metadata you added, and any edits you made in Lightroom, will still be transferred over to the other machine.)
Please refer to http://www.peachpit.com/articles/article.aspx?p=1930499 for more details.
Thanks!
Eshant Jindal

Creative Cloud Student, can I use one membership on my laptop and desktop (two machines)?

Hi,
I currently have a macbook and am subscribed to creative cloud (student). I am looking at buying a second machine (desktop) and want to know if I can use CC on two machines under my one membership? Obviously I am a single user and will not be using the two machines at the same time.
Thanks

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each
-Both computer Cloud subscription activations may not be in use at the same time

Two machines saving the same file as different sizes?

My coworker and I both have the same version of Illustratir (CS6) and both use Lion on iMacs, but today noticed something weird. He saved a file similar to a file I had done before as both an eps and a pdf and his file size was more than twice what my file sizes usually are. I thought it was odd, so I copied everything from his file into a new file (same dimensions) and saved out an eps and pdf (default settings), and like I thought, my files were less than half the size of his.
Why would two machines be saving identical files at different sizes? Is there a setting somewhere I'm missing? Everything in the file is vector, if it matters. There's not even any editable text.

See the mechanism of saving here: http://superuser.com/questions/66825/what-is-the-difference-between-size-and-size-on-disk
The size of the "blocks" depends on the size of the disk and how it's been formatted.

How to work on the same project on two machines at the same time and also exchange progress seamlessly using Adobe Premiere Pro CC 2014?

We are working on a film project on Adobe Premiere Pro CC 2014. Two editors are working on the same film project (same pproj file ) on two machines. As a result the bin structure and the file structure is exactly the same. We even bought two licenses for the respective machines to make matters simple (at least we thought it would).
Now when we share a sequence between the two machines, every time we have to import and re-link media. Also each sequence import comes with its own set of files, which are actually already present in the project. Basically the new sequences are looking to re-link the media to the original/ source files only and are completely ignoring the file structure present in the project.
In all editing softwares, timeline/ sequence sharing is a very common practise when working on multiple machines. Why is it so tedious in CC 2014? Every time we share a sequence between the two machines the media gets doubled and tripled in the project. As a result the project file size is increasing perpetually. Already Premiere CC 2014 is extremely laggy and slow, and this stupid bug is making it more difficult for us to finish our work on time.
Has anybody ever faced this issue? How do we solve it? We are willing to try out any workflow that you can suggest.

Concurrently working on the same project it requires a specific implementation in all editing programs like Avid's Unity/ ISIS shared storage. That's what you are simply not considering. none of your issues would be any problem if your projects resided on a commonly accessed server or something like that. Check respective hardware solutions.
Mylenium

Creation of diskset in Two node cluster

Hi All ,
I have created one diskset in solaris 9 using SVM in two node cluster.
After diskset creation, I mounted the diskset in a primary node in the mount point /test. But, the disk set is mounting on both the nodes.
I created this diskset for failover purposes, if one node goes down the other node will take care.
My idea is to create a failover resource (diskset resources) in the two node cluster.
Below are steps used for creating the disk set.
root@host2# /usr/cluster/bin/scdidadm -L d8
8        host1:/dev/rdsk/c1t9d0   /dev/did/rdsk/d8
8        host2:/dev/rdsk/c1t9d0   /dev/did/rdsk/d8
metaset -s diskset -a -h host2 host1
metaset -s diskset -a -m host2 host1
metaset -s diskset -a /dev/did/rdsk/d8
metainit -s diskset d40 1 1 /dev/did/dsk/d8s0
newfs /dev/md/diskset/rdsk/d40
mount /dev/md/diskset/dsk/d40 /test
root@host2# metaset -s diskset
Set name = diskset, Set number = 1
Host                Owner
host2                  Yes
host1
Mediator Host(s)    Aliases
host2
host1
Driv Dbase
d8   YesPlease let me know how to mount the disk set in one node.
If i am wrong, please correct me.
Regards,
R. Rajesh Kannan.

The file system will only mount on both (all) nodes if you mount it globally, i.e with the global flag or if there is an entry in /etc/vfstab that has a global option.
Given your output below, I would guess you have a global mount for /test defined in /etc/vfstab.
Regards,
Tim
---

Migrate 8.1.6 to 8.1.7 between two machines

on linux rh 7, I have installed 8.1.7. On another machine I have a database called chem on 8.1.6.
How do I export the table structure from 8.1.6 in an sql file that can be used to recreate my structure in the new version?
How do I EXPORT the data...will the file created by the export command in 8.1.6 be compatible with 8.1.7?
Is there a better way to do this?

I hate to answer my own question...
Upgrades of lower versions of Oracle to higher versions can be handled directly by the export/import. I found by going to the usenet oracle group, they had many posts which covered this issue.
If its not on the same machine, and you need to essentially copy you database from one to machine to the other, these are the steps:
1. In the lower version machine, execute an export. You can do this from the sql*plus prompt, or on many os's just type exp blah-blah, and you will have exported your database. These can be quite large files, and enterprise data could be in the multi-gigabyte size. Obviously, this can be an os issue.
2. On the other machine with the higher version, create the various empty tables and the same users for the database with the same name as the database on the older version.
3. Use the import command on the sql*plus or imp blah blah in some operating systems, and this will import your data into the new version of the database. Go have a cup of copy, because this is going to take awhile.
You can probably write a script to do this, but I couldn't find one anywhere...if anybody has one, please post it here.
A faster alternative would be to use jdbc/java and use metadata to create the new tables in the new database, and then use selects on one database, and inserts on another database to insert the data. This only works if the two machines are networked together.
The migration assistant seems to work only if the versions and databases are on the same machine.
null

A two machine cluster

Similar Messages

Maybe you are looking for