A unique problem, i think.
ok, here's the lowdown. 3 computers are in the office, and i also have 1 laptop. all macs. the 3 in the office are connected to my wireless network through ethernet, because i find the idea of putting a wireless card in a desktop that is 2 feet from the router to be @#$%ing ridiculous. i want them all to have the option to play music from the awesome vintage stereo i have in my living room. so i buy an airport express, cuz that's what it says it's for. computers on a wireless network, all hooked up to music, printing, etc.. i plug it in, set it up with the laptop, works great.
so why oh why can none of the other computers find the airport express unless i PLUG my, ahem WIRELESS airport express into my router with an ethernet cable. kinda defeats the purpose of the whole wireless idea now, doesnt it? the apple tech i spoke to on the phone failed to be able to comprehend my problem. so i defer to you, oh discussions reader. you're my only hope.
...the 3 in the office are connected to my wireless network through ethernet...
I think that you are trying to say is that you have a wireless router and these 3 are connected to that wireless router via Ethernet. Is that correct?
If you do have a wireless router, you want to configure your AirPort Express (AX) to join the network provided by that router. Follow the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode.
Similar Messages
-
Unique problem Screen is not Getting data populated from BDC_DATA itab
Hi Gurus,
I have an unique problem, I have an custom transaction (module pool) and which first runs an ALV report displays an QM Records, There is an command button at the top of the report to create new defect, where i provide the Material Number, Supplier and Defect Code, and then if i press create it should navigate to standard transaction QM01 and It should create a new defect code.
Issue:
The recording runs fine till providing Material Number, Supplier and Defect Code of ZTCODE when it navigates to QM01, the whole executions just stops, i dont know why it is moving ahead. If i try to skip and come out of standard transaction also no improvement and all manually i should come out.
Comparision with recording Made in ZTCODe and QM01.
If i record the same activity directly with QM01 and if i try to run the recording, it runs perfectly.
if i am trying to record it through Z module pool where it will navigate to standard transaction code QM01, it stops when it reaches QM01, i am getting this error. i dont know why.
I have attached the code for your reference, kindly suggest me what can be the problem.
MY CODE:
perform bdc_dynpro using 'ZQRPCCOMEX_NEW_SWCB' '1000'.
perform bdc_field using 'BDC_OKCODE'
'=FC_DEFC'.
perform bdc_field using 'P_VAR'
'/VEHICLEPROJ'.
perform bdc_field using 'BDC_CURSOR'
'S_NITG-LOW'.
perform bdc_field using 'S_QMDAT-LOW'
'03.09.2010'.
perform bdc_field using 'S_QMDAT-HIGH'
'03.03.2011'.
perform bdc_dynpro using 'ZQRPCCOMEX_NEW_SWCB' '1000'.
perform bdc_field using 'BDC_OKCODE'
'=ONLI'.
perform bdc_field using 'P_VAR'
'/DEFECT_CODE'.
perform bdc_field using 'BDC_CURSOR'
'S_NITG2-LOW'.
perform bdc_field using 'S_NITG2-LOW'
'G22C'.
perform bdc_dynpro using 'SAPLSLVC_FULLSCREEN' '0500'.
perform bdc_field using 'BDC_OKCODE'
'=NEW_DC'.
perform bdc_dynpro using 'ZQRPCCOMEX_NEW_SWCB' '9507'.
perform bdc_field using 'BDC_CURSOR'
'W_SCR_REFNUM'.
perform bdc_field using 'BDC_OKCODE'
'=OK'.
perform bdc_field using 'W_SCR_MATNR'
'G22C'.
perform bdc_field using 'W_SCR_LIFNR'
'220947-00'.
perform bdc_field using 'W_SCR_REFNUM'
'C_DEF_11'.
it is not executing from here these screens belongs to QM01, it stops the whole execution
perform bdc_dynpro using 'SAPLIQS0' '7200'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RQM00-MAWERK'.
perform bdc_field using 'RQM00-MAWERK'
'CTT'.
perform bdc_field using 'VIQMEL-QMCOD'
'0120'.
perform bdc_dynpro using 'SAPLIQS0' '7200'.
perform bdc_field using 'BDC_OKCODE'
'=BUCH'.
perform bdc_field using 'BDC_CURSOR'
'RQM00-MAWERK'.
perform bdc_field using 'RQM00-MAWERK'
'CTT'.
perform bdc_field using 'VIQMEL-QMCOD'
'0120'.
perform bdc_dynpro using 'SAPLSLVC_FULLSCREEN' '0500'.
perform bdc_field using 'BDC_OKCODE'
'=&F12'.
perform bdc_dynpro using 'ZQRPCCOMEX_NEW_SWCB' '1000'.
perform bdc_field using 'BDC_OKCODE'
'/EECAN'.
perform bdc_transaction using 'ZM11'.
The screen gets hanged up in the QM01 screen and where the mandatory fields are not getting populated and thats it execution is not happening at any screens if i am trying to come out of transaction.
Assumption - Correct me if iam wrong.
There can be complication while calling a Ztcode (module Pool) which in turns calls a Standard Tcode.
Thanks & Regards,
S.SaravananHI,
Check the recording i think the recording does not contain the initial screen i.e SAPLIQS0 200.
Re record the bdc or just add the initial screen in the BDC
perform bdc_dynpro using 'SAPLIQS0' '200'.
perform bdc_field using 'RIWO00-QMART' 'Q!' " What ever notification type u have
perform bdc_field using 'BDC_OKCODE' '/00'.
This will sove ur problem .
Regards,
Madhukar Shetty -
i bought an new ipad 3rd gen 16 gb wifi cellular in may 2012. I hv a unique problem wherein the screen of ipad is not as smooth as what is general experience. Its not buggy but lacks smoothness and finger doesnot glide as smoothly .Can anybody help.
Do you clean your iPad screen? Do not use standard window cleaners, with ammonia or alcohol, like Windex, but a damp towel, followed by a micro-fibre cloth is recommended. There are also cleaners you can buy which are specifically designed for iPad/iPhone devices, such as iClean from Monster.
-
UNIQUE Problem in pulling DATA from DATA base table to internal table
Dear Experts,
I am new to ABAP. I have a very basic question but looks a quite puzzling one to me. Hemnce I am posting it here.
I am facing an unique problem in pulling data from database table and populating that data into internal table for further use.
The data in the database table "Zlt_mita" with fields M1 (Employee Name, Type: Char20) and M2 (Employee Code, Type Char7) are:
Plz refer the screenshot in the attached file:
My Code:
1) When I try to pull data from Dbase table by taking M2 as parameter.
This code is succcessful and I am able to populate data in internal table it_dat.
TYPES: Begin Of ty_DAT,
M1 TYPE Zlt_mita-M1,
M2 TYPE ZLT_mita-M2,
END OF ty_DAT.
DATA: it_dat TYPE STANDARD TABLE OF ty_dat with header line,
wa_dat TYPE ty_dat.
PARAMETERS: p_mitar TYPE Zlt_Mita-M2.
SELECT M1
M2
FROM ZLt_mita
INTO TABLE it_dat
Where M2 = p_mitar.
Loop at it_dat into wa_dat.
WRITE:/2 wa_dat-M1,
10 wa_dat-M2.
ENDLOOP.
2) When I try to pull data from Dbase table by taking M1 as parameter.
This code is NOT succcessful and I am NOT able to populate data in internal table it_dat.
TYPES: Begin Of ty_DAT,
M1 TYPE Zlt_mita-M1,
M2 TYPE ZLT_mita-M2,
END OF ty_DAT.
DATA: it_dat TYPE STANDARD TABLE OF ty_dat with header line,
wa_dat TYPE ty_dat.
PARAMETERS: P_Mita TYPE ZLT_Mita-M1.
SELECT M1
M2
FROM ZLt_mita
INTO TABLE it_dat
Where M1 = P_Mita.
Loop at it_dat into wa_dat.
WRITE:/2 wa_dat-M1,
10 wa_dat-M2.
ENDLOOP.
Why is this happening when both M1 and M2 are Type Character fields.
Looking forward for your replies.
Regards
Chandan KumarHi Chandan ,
Database fetch is case sensitive ,So u need to give exact format in where condition.
Make your parameter and database in same case so that you need not worry about case sensitivity .
Check the lowecase check box in the domain .
Then declare your parameter
PARAMETERS:
P_Mita
TYPE ZLT_Mita-M1 LOWER CASE .
You can do the vice versa also by unchecking lowercase and giving Upper case instead of lower in parameter declartion .
Regards ,
Juneed Manha -
dears,
I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware I do resoftware more than 3 times did not fix.
Network also always missing.
I am living in KS Wichita. I hope you help me pleas.
Regards.iPhone warranty is not international. You will have to return your
iPhone to Saudi Arabia for repair/replacement. Either take it back
yourself or send to friend/relative for them to take to Apple. Apple
will not accept international shipments for repair nor will Apple
ship repaired/replaced iPhones out of the country where the repair
was done. -
i have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!.
one more question when i phone5 update with iOS 8.1.2 this iOS supported iphone5???Hi Ios 8.1.2 Should work on iPhone 4s / 5 You may have a bug Backup to cloud over WiFi Then Restore back to Factory Settings This will make iPhone as new. Use same Apple ID & you will get your Apps & Data back Do Restore over your WiFi. Cheers Brian
-
I am having the same problem I think. With mobileme you simply copy documents to the idisk folder and then synch. I cannot seem to sink that folder anymore. Any idea as to how I can simply copy folders to icloud and then access the MS Word and PDF files on my iphone?
Apple never bopthered to explain that this would happen
Your iDisk is still accessible after moving to iCloud in exactly the same way as before. Nothing is deleted until June 30th 2012.
, so I could easily have lost ALL of the files I kept on iDisk.
No, you couldn't. Firstly, nothing was deleted from your iDisk. Secondly, any files stored on your iDisk should never be your only copy. Even if your iDisk spontaneously combusted, you should keep local backups elsewhere.
Does Apple WANT people to move their storage elsewhere and stop paying Apple for it?
Yes. Apple doesn't provide such a service anymore, nor are you paying them for it.
Apple has made no effort to suggest remedies for the problem it has given iDisk users
They've provided instructions on how to download your files from your iDisk. What you do with them after that is your choice. -
Keyboard and characters unique problem IN all programs
Hello, thank you reading I have a unique problem with my computer. I have searched a great deal to locate information on my issue with no luck. It is very hard to describe the problem and I figured asking here might be the best idea. I have all the latest update software. I have not installed any new ]programs and this problem just started out of nowhere with In the last week. No wireless keyboard.
First the computer writes capital letters on its own while I type. The letters seem to be only the n, I and s. This goes for every application or text box on the web that I can type In.
Second the left arrow key when pressed types this ]]]]]]]]
Third the right shift key when pressed works, but makes an error beep each time
Fourth the enter key randomly doubles spaces rather than single space when pressed in programs like mail and word.
Fifth the left shiFt key types IIII when pressed
I have done the usual rebooting, repairing of the disk and permissions, emptying cache, restored defaults IN keyboard setting, sticky keys off with no luck. Once again no new programs have been installed. Issue started about the same day I registered for and started using facebook one week ago if that means anything?
Thanks for taking a look at my Issue.
-BrodyStill having the same issue with my computer hs anyone ever heard of this?
-
I have a very unique problem, i have designed a small aplication involving MS acces and java. I am formatting the date into mm/dd/yyyy format using SimpleDateFormat.The application is running of 4-5 computers very succesfully but on a single computer the same application returning date in dd/mm/yyyy.
What could b the possible cause..???
plz help me out its really bugging me....Like I said, show the code where you are doing "formatting". If you are not doing it in the print statement, or when you define a String for the print statement, then it has absolutely no effect. A Date does not have a format, only its String representation does, and you have to format that representation every time you use it.
If you are simply doing System.out.println(date), then it will print the date using the locale settings to format it. -
Nokia 5800 Touch Screen unique problem
Hi
My 5800 is showing some unique problems these days.
If i click the telephone key on the touch panel the contact keys gets pressed.
And this happens acroos all applications.Tried reset, hard, soft everything but not got the solution.
If anyone has please do share as this is taking on my nerve.It's not unique because other people have had the same issue.
It happened on my device when I took it apart and put back together and tightened the screws too much. It has something to do with the connector connecting the display's touch sensor to the phone electronics.
Loosening the screws helped.
(I took it apart to install some non-Nokia covers on it which might not have the exactly same dimensions as the original ones. By the way some non-Nokia covers have a ridiculous design flaw which reflects the light from the LED flash right into the camera module and ruins all photos taken with a flash!) -
Unique problem, can get calls only from Airtel and...
Hi Friends, I have a unique problem here and some input on the same.
I can receive incomming calls only from Airtel and no other service providers. I do not know why. I cannot even recieve calls from landline and also cannot get other providers SMSes.
Please help me out in this regard.
I am using Nokia E72 handsetYou may want to check your firewall settings. Go to options-security-firewall. Check to see if it is enabled and the scroll down to exceptions and see if any of those are selected.
-
Creative Zen MicroPhoto, i think i have a unique problem
My 8gig player froze the other day, i couldnt turn it off so i restarted it. When i turned it back on most of the songs were gone, the music library looked similar to the way it had about a week or two after i got it. Also everytime i turn it on now it says "Rebuilding Music Library" and takes a good amount of time to start up. I can still play music but insted of the artist name, album and song name, the player says "select music to play". I have not tried to put back on the music that got deleted yet becuase i would like to try to get this fixed first. Has this happend to anyone else before? Or does anyone know what went wrong?
?How long does the battery last? Can you overcharge the battery? If you know either of these answers please respond. I have my entire music library on my Zen Micro Photo and am unable to access it because it will not "turn on".
I have been running it on the charger for the past two weeks and wonder if I destroyed the battery. -
Unique problem transferring songs...I think
Using Windows XP Home Edition
First, a short background...my computer crashed last month, and I lost my library. I eventually restored my library by transferring from my ipod. However, before I did that I had added about 10 new songs to the library. My library now shows all my songs. I have updated to current versions on itunes and my ipod mini. When I plug the ipod into the computer, itunes recognizes it. It updates automatically, but the 10 songs I added to library before transferring the old ones back will not update on the ipod. I have tried the manual update also. In addition, any new songs I add to the library now, will not transfer to my ipod. Any help or suggestions will be very appreciated.Also, somehow I put the songs in my library twice so i have duplicates of every song. Is there an option to delete duplicates or do i have to maually delete them one by one?
-
Looking for SQL Solution to Very Unique Problem
Hello,
New here, thanks. I have what I think is an interesting problem. I really don't want to post it because the background and explanation is rather lengthy. It has to do with one table that holds some general info; there is a unique numeric primary key. Associated with this table are three different tables identical in structure, having only two fields: the primary key, and a code. The three tables correspond to test results performed by a different individual. For each entry in the main table, where there is one and only one entry for the primary key, the same test could have been performed one, two, or three times. So there could be one, two, or three different sets of codes describing the test results. Only one set of the test result codes is the correct one. And there is a hierarchy that determines which is the correct set of codes. Say the main table is called LR. LR is linked to three different tables, each of which has the exact same structure. The relationship between LR and each of these three tables is one to many. Call the three tables that hold test results SCR, QC, and PT. Some assumptions can be made. In the table LR there are two flag fields: Q_STATUS and P_STATUS whose values each are either Y or N. If P_STATUS=Y, then we are guaranteed a set of test result codes in the table PT, and this set of codes is always the final word; always the correct results. If P_STATUS=N but Q_STATUS=Y, then we are guaranteed to have a set of test result codes in the table QC, and if this is the case, then this set of codes is the final word. Now if P_STATUS=N and Q_STATUS=N, then we know there is a set of test result codes in the SCR table, we know there is one and only one set of test result codes, hence this set is the correct one. Another assumption that can be made, for any row in the LR table, there will ALWAYS be at least one set of test result codes in the SCR table. There may or may not be a set of test result codes in the QC and PT tables, and the flags in the LR table indicate if either is the case. Hope this makes sense so far. For many years I have been trying to figure out one SQL statement that will return the correct set of test result codes. Often I have to analyze data that relies on the results of a test (e.g. how many tests had the code 850 in the year 2011?). That's a simple example, but you get the idea. Since I have to determine which set of test result codes is the correct one to use, I've always had to rely on writing a PL/SQL procedure anytime I have to work with test result codes. I tend to use a conditional: IF (P_STATUS=Y) THEN /*the right answer is in the table PT*/ ELSIF (Q_STATUS=Y) THEN /*the right answer is in the table QC*/ ELSE /*the right answer is in the table SCR*/. I have a document with a little more detail, and an example. Or maybe this makes absolute sense to someone out there and they know exactly what to tell me! And let me say this is not a critical issue for me. I've been searching for this SQL statement for about 10 years now. I consider myself pretty proficient with SQL, but definitely not a guru. I'm thinking the solution I'm looking for might rely one some kind of full outer join on all three of the tables SCR, QC, and PT and then if those results could be linked to the LR table, and then maybe in the SQL statement use of DECODE might do it. I want one SQL statement that will return me the correct set of testing result codes. Hope this all makes sense. To anyone who has read it I thank you very much. I would be very happy to provide my document with further explanation and an example. Any response is greatly appreciated. Guess I have to keep coming back here now to see if anyone responded. Oh, I might add that we use a very old version of Oracle (8.0.3) but, if all goes according to plan, we should migrate to the most current version within the next year.
Thanks,
John Cardella
Edited by: BluShadow on 21-Feb-2012 13:52
Email address removed for your own benefit, unless of course you'd like spam bots to pick it up and send you lots of rubbish?Why do I keep three tables. Each sample that is evaluated is always screened by what I will call a "tech." Every so many cases the test must be repeated for quality control. If the findings of the initial testing or of a quality control test are found to contain abnormal results, then the test must also be repeated, this time looked at by a doctor. So I have what I refer to as the "main" table; the one that holds final data, which in my example I explained the two "flag" fields that indicate if the test was repeated. Every time a test is evaluated it is done by the same person, and the findings of an individual testing, or screening, are a set of test result codes. There is the "main" control table which I have called LR in my example. The reason I have the other three tables: one is used to store the test results of the initial screening (always done); one is used to hold the test results of a quality control case (may or may not be done); and one is used to hold the test results of an abnormal case that was screened by a doctor (may or may not be done). There is a separate table for each individual who may have done a screening.
Let us consider the results of just one case. In the table LR we have something like this:
| KEY | P_STATUS | Q_STATUS |
| 100 | Y | Y |
By default, for any entry in the LR table there is always a set of codes in the SCR table. We know a quality control was performed because QC_STATUS=Y, and we know it was screened by a doctor because P_STATUS=Y. So we would have three different sets of findings, each in one of the three tables:
SCR TABLE: QC TABLE:
| KEY | CODE | | KEY | CODE | | KEY | CODE |
| 100 | 014 | | 100 | 13R | | 100 | 13R |
| 100 | 13R | | 100 | 150 | | 100 | 170 |
| 100 | 150 | | 100 | 170 | | 100 | 180 |
| 100 | 160 | | 100 | 190 |
The values in the three tables represent the findings of three different people who screened the test sample. Now suppose I combined all the data, I would suppose it would look something like this:
| KEY | P_STATUS | Q_STATUS | KEY | CODE | KEY | CODE | KEY | CODE |
| 100 | Y | Y | 100 | 014 | null | null | null | null |
| 100 | Y | Y | 100 | 13R | 100 | 13R | 100 | 13R |
| 100 | Y | Y | 100 | 150 | 100 | 150 | null | null |
| 100 | Y | Y | 100 | 160 | null | null | null | null |
| 100 | Y | Y | null | null | 100 | 170 | 100 | 170 |
| 100 | Y | Y | null | null | null | null | 100 | 180 |
| 100 | Y | Y | null | null | null | null | 100 | 190 |
Since P_STATUS=Y I would want the result set returned to be {13R, 170, 180, 190}.
But suppose P_STATUS=N and Q_STATUS=Y then I would want the result set to be {13R, 150, 170}
And if P_STATUS=N and Q_STATUS=N then I would want {014, 13R, 150, 160}
Of all of the sets of test results codes, only ONE is ever the final word (i.e. the right answer).
So what I was trying to do is find a query that would give me what I want. And my apologies if there is a major design flaw. I always thought it was not that bad. But then I am no SQL guru either.
To anyone who has read on further my most humble thanks. I really did not mean to waste anyone's time or be a pain in the ass.
Thanks Again,
-JC -
I purchase a new album on my phone but then cannot download it to my laptop - I get the message:
"You can use iTunes Match on this computer with just one Apple ID every 90 days. All I can think is that the problem stems from purchasing a mobileme family & some of the music being my daughters. (she is 9 & I need to be ble to listen to more than Katy Perry & Justin Bieber) Please help! :-(Welcome to the Apple Community.
Youll get that message when you change the iTunes account you are logged into, you can't keep changing it.
Maybe you are looking for
-
Data in the structure clearing when chicking custom tab in screen exit
Hi All, I am working in screen enhancement for WZR1(payment document).Here in header details the custom screen will appear under additional fields tab. I have appended the custom fields in structure KOMLFK and table WBRK.here when i debug the scre
-
I just purchased match to download my itunes library from my computer to my phone. how do I do that
I just purchased match to download my itunes music library from my computer to my android phone. How do I do that?
-
SChannel Errors on Front Ends Affecting Client Connectivity Between Pools
We have an SE pool in Asia. A user tried attending a conferencing hosted on the US EE pool but received an error. Looking in the logs I see the following error (30988) in the Lync events on the Asia server: Sending HTTP request failed. Server funct
-
JDeveloper build application with JAAS
Hello! I try to pack my application using JAAS XML. I create the .war file and it works nice. The login-form appears, but the problem is that the .ear file must have the orion-application.xml and the jazn-data.xml in the META-INF folder but these fil
-
I cannot get the cellular data account on my ipad. I have gotten it in the past
I Have an ipad . I'm trying to get my cellular data turned on and all I get is an error 500-- internal server error; the server encountered an unexpected condition which prevented it from fulfilling the request. I have no internet service, but I do