A user exit for table KONV

Hi,
I am looking for a User Exit that will enable me to update the fields of the conditions table KONV, while entering materials during the process of a Sales Order in VA01 or VA02.
Thanks,
Amit Shur

I would like to enter some logics when determining the price of an order line item when entered, for example take into account old purchaes made by the same sold-to, in order to decide whether he deserves a discount.

Similar Messages

User exit for changedocument ?

Is there any user-exit for table CDHDR/CDPOS that i can update value into them?
Could anyone tell me?

Hi Jimy,
I dont think u will have specific USer exit for this.
IF the 'Changedocument' check box is checked in the dataelement of the field the.Whenever the value changes in that fiels the CDHDR and CDPOS will automaticaaly updated.
Please let me know u r requirement.
Thanks

User exit for price check( KONV-KBETR )

hi,
i need to put price check in sales order on field KONV-KBETR . for this i need a user-exit. can any one help me in this.
regards,
pavan,

Hi,
There is no problem with the pricing config here. When ATP check is performed, the system checks the availability in APO system and redetermines the pricing so the pricing is lost.
I am just looking our for a solution, where in I can store the data in internal table and when ATP check is completed, transfer the changed price from internal table back to the sub-line.
I am just looking into RV61AFZB with user exit USEREXIT_XKOMV_FUELLEN. Appreciate any help in finding the user exit for this requirement.
Best regards,
Siva

BADI/User Exit for custom table update from Delivery

Hi
Our requirement is to update a custom table with the delivery number and other related details when the picking status is changed to "C". Kindly suggest BADI/User exit for this requirement .
Thanks in Advance for your immediate help .

Hi Joseph,
See SAP Note 415716 - User exits in delivery processing. It says when you have the document number available, what is permitted, what not, ....
I hope this helps you
Regards
Eduardo

VT01N User exit for adding additional field to VTTP table and populate the

Hi,
Can any one sujjest what is the use exit/bapi when we add(append) a custom field to vttp table to populate the incremental number based on ship to address when we create a shipment..
need user exit in ...............to populate data to vttp table custom field when we append......

hi,
check these exits for vt01n.
Transaction Code - VT01N                    Create Shipment
Enhancement/ Business Add-in            Description
Enhancement
V56USVDP                                Preparation for updating new objects for transport?
V56USVDO                                Update new objects for transport
V56USTAT                                User-individual definition of transportation planning status
V56UNUMB                                Shipment number allocation
V56UDLUP                                Obsolete as of 4.6C: Delivery Update on Delivery Routines
V56UCHCO                                Check shipments are complete
V56UCHCH                                Shipment processing: Check whether changes were made
V56TDLIF                                Filter Delivery Items for Shipment
V56SLDET                                Shipment processing: Leg determination
V56MVT04                                Extensions for Collective Processing of Shipments
V56LOCID                                Shipment Processing: Determine Location Identification
MV56AINI                                Initialization of transaction control for transportation
V56AFCCH                                Shipment processing: Check function code allowed
V56AGTAR                                User Exit for Filtering Shipping Unit Calculation
V56ARCHV                                Customer-spec. checks for archiving shipments
V56ATKTX                                Change the number of lines for text input in shipment
V56BMOD                                 Transportation processing: Field modification
V56DISTZ                                Shipment Processing: Determine Distance
V56FCOPY                                Shipment processing: Copy delivery data
V56FSTAT                                Shipment processing: Activities when setting a status
V56L0001                                Status of Shipments for a Delivery
V56LDELI                                Read Delivery Data for Shipment Processing
Business Add-in
BADI_LE_SHIPMENT                        BadI: Shipment Processing
BADI_V56N                               User Exit for Message Determination: Shipment

User exits for VBAP table

hi,
i want to add 3 custom fields to the VBAp table. so i need the user exit for the VBAP table .
can any one help me in finding it out.
thanks.
suki

hello Erwan,
yes the link was useful.
i found the include MV45AFZZ useful .
is there a way to find out the function exit for vbap?
or else in which function exit this MV45AFZZ include is used ?
because i have to use a Function exit to include 3 fields in VBAP table.
waiting for ur reply.
thanks
suki

User - exit for STKO table (PCSD0003). How to update customer field.

Hello,
I made a user - exit for STKO table.
It works like a formula field - calculate total weights of the specification components.
But there is a problem!
When I add new components into my specification or change them, my customer field is now calculated.
I always need to click a Customer tag and explode a user subscreen. Is there any way to sort the problem out?
I want to recalculate my customer field every time I change components?

Hi,
There is a specific user-exit for delivery-creation/delivery processing/change delivery status.
the program name is MV50AFZ1. Inside this exit, there is a particular sub-routine called as
FORM USEREXIT_MOVE_FIELD_TO_LIPS.
endform.
May be probably you can try this. This also needs an access key for changing the SAP standard program.
Another way is you can use the BADI : LE_SHP_DELIVERY_PROC
This BADI influences processing of delivery data, during creation and changing of deliveries at specific points described in the interface. The BAdI methods enable you to read, write, determine, delete, and save your own delivery-related data, and to change the standard delivery data.
Lakshminarayanan.
P.S. Mark all helpful answers for points

User exit for AS01 - table ANLZ

Hi,
i need an user exit for transaction AS01.I want to change field ANLZ-CAUFN when user press the save button.I found enhancement AISA0001, but it doesn't contain the table anlz, only anla.Can u help me pls?
regards ,
Burak

HI
THESE ARE THE USER EXITS AVAILABLE FOR TCODE AS01
Exit Name     Description
AIST0001---     Exchange number range in master data maintenance
AIST0002---     Customer fields in asset master
AMSP0002---     Determine relationship type for two company codes
AAPM0001---     Integration of asset accounting and plant maintenance
AFAR0003---     External changeover method
AFAR0004---     Determination of proportional values for retirement
AINT0004---     Change amount posted for certain areas
AINT0005---     Dummy for extended syntax check. Do not use.
TRAN0001---     User exit for asset transfer
IF THIS IS USEFUL PLEASR REWARD POINTS
REGARDS
ANOOP
Message was edited by: ANOOP R.S

User Exit for saving Invoice

Hi Experts,
My req, is I have to check billing date with order date/ delivery date while creating the invoice in VF01.
For that I have done codig in user exit RV60AFZZ, so it gives error ,but the billing date field get disable.
& this invoice no. alsp get created.
So can anybody plz tell me in which user exit i have to put my code ???
I have tried with RV60AFZC.But it is not working.
My code is
FORM userexit_pricing_prepare_tkomp.
* TKOMP-zzfield = xxxx-zzfield2.
* structure for vbak
TYPES:BEGIN OF ty_vbak,
      vbeln TYPE vbak-vbeln,
      audat TYPE vbak-audat,
      END OF ty_vbak.
*likp structure
TYPES:BEGIN OF ty_likp,
      vbeln TYPE likp-vbeln,
      lfdat TYPE likp-lfdat,
      END OF ty_likp.
*vbrp structure
TYPES:BEGIN OF ty_vbrp,
      vgbel TYPE vbrp-vgbel,
      vgpos TYPE vbrp-vgpos,
      aubel TYPE vbrp-aubel,
      aupos TYPE vbrp-aupos,
      END OF ty_vbrp.
DATA:it_vbak TYPE STANDARD TABLE OF ty_vbak,
     it_likp TYPE STANDARD TABLE OF ty_likp,
     it_vbrp TYPE STANDARD TABLE OF ty_vbrp.
DATA:wa_vbak TYPE ty_vbak,
     wa_likp TYPE ty_likp,
     wa_vbrp TYPE ty_vbrp.
***** take reference document no & delivery no. *****
LOOP AT xvbrp.
wa_vbrp-vgbel = xvbrp-vgbel.
wa_vbrp-vgpos = xvbrp-vgpos.
wa_vbrp-aubel = xvbrp-aubel.
wa_vbrp-aupos = xvbrp-aupos.
APPEND wa_vbrp TO it_vbrp.
ENDLOOP.
IF it_vbrp IS NOT INITIAL.
SELECT vbeln audat FROM vbak
      INTO TABLE it_vbak
      FOR ALL ENTRIES IN it_vbrp
      WHERE vbeln = it_vbrp-aubel.
SELECT vbeln lfdat from likp
       INTO TABLE it_likp
       FOR ALL ENTRIES IN it_vbrp
       WHERE vbeln = it_vbrp-vgbel.
ENDIF.
**** check for invoice date with order date *****
LOOP AT it_vbak INTO wa_vbak.
IF xvbrk-fkdat IS NOT INITIAL AND xvbrk-fkdat < wa_vbak-audat.
    MESSAGE 'Invoice Date is less than Order Date' TYPE 'E'.
ENDIF.
ENDLOOP.
**** check for invoice date with delievery date *****
LOOP AT it_likp INTO wa_likp.
IF xvbrk-fkdat IS NOT INITIAL AND xvbrk-fkdat < wa_likp-lfdat.
    MESSAGE 'Invoice Date is less than Delivery Date' TYPE 'E'.
ENDIF.
ENDLOOP.
ENDFORM.                    "USEREXIT_PRICING_PREPARE_TKOMP
Thanks & Regards,
Anagha Deshmukh

Hello,
These are the user exits for the tcode.
J_3RSINV            Export sales
SDVFX007            User exit: Billing plan during transfer to Accounting
SDVFX008            User exit: Processing of transfer structures SD-FI
SDVFX009            Billing doc. processing KIDONO (payment reference number)
SDVFX010            User exit item table for the customer lines
SDVFX011            Userexit for the komkcv- and kompcv-structures
V05I0001            User exits for billing index
V05N0001            User Exits for Printing Billing Docs. using POR Procedure
V60A0001            Customer functions in the billing document
V60P0001            Data provision for additional fields for display in lists
V61A0001            Customer enhancement: Pricing
Keep the break point and try in the debugging in each and every exit and see which user exit is triggred.

How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,

Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM

How to find the user-exit for transaction fpp2

Hi experts,
could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.

Hi,
Use the following program to find user exits of specified code.
*& Tables
TABLES : tstc,     "SAP® Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP® Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
Find SAP® Modifications
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
I executed the above program but there are no user exits for the specified Transaction.
Thanks,
Naveen Kumar.

How to find the user exit for order cancellation

I want to find the user exit for order cancellation. And also to ensure that no one amends the order once the canellation has taken place. The cancellation shall be deemed to be affected only if the vendor has confirmed the acknowledgement of the order cancellation.
I have got a Zreport where this order should not come as open order item.
Please tell me the method of finding the users exit for order cancellation and stop the order from getting modified. And also how to find the tables in which the data has to be updated that the order has to be cancelled.
In the PO header i want an additional tab <cancellation> by which the user by the help of userid and password should be able to cancel the order. An order once cancelled cannot be undone. A new order has to be placed. The new order can be placed refencing the cancelled purchased order.
My client has got a very stringent requirement. In the past cancelled order has been undone and caused lot of problems.
Regards.

hi
pls tell me t.code so that i will send all user exits related to that particular t.codes
Thanks & Regards
phaneendra

How to find the user exit for a screen..

Hi,
plz help me how to find the user exit for a screen..?
Regards
Anbu

Hi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
    SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
    tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
      WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
        WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
        WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'FUGR'
        AND obj_name EQ enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
    SELECT * FROM tadir INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object IN ('SMOD', 'SXSD')
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
    WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(105) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
      SORT jtab BY object.
      DATA : wf_txt(60) TYPE c,
      wf_smod TYPE i ,
      wf_badi TYPE i ,
      wf_object2(30) TYPE c.
      CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
      LOOP AT jtab INTO wa_tadir.
        AT FIRST.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Enhancement/ Business Add-in',
          41 sy-vline ,
          42 'Description',
          105 sy-vline.
          WRITE:/(105) sy-uline.
        ENDAT.
        CLEAR wf_txt.
        AT NEW object.
          IF wa_tadir-object = 'SMOD'.
            wf_object2 = 'Enhancement' .
          ELSEIF wa_tadir-object = 'SXSD'.
            wf_object2 = ' Business Add-in'.
          ENDIF.
          FORMAT COLOR COL_GROUP INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 wf_object2,
          105 sy-vline.
        ENDAT.
        CASE wa_tadir-object.
          WHEN 'SMOD'.
            wf_smod = wf_smod + 1.
            SELECT SINGLE modtext INTO wf_txt
            FROM modsapt
            WHERE sprsl = sy-langu
            AND name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WHEN 'SXSD'.
For BADis
            wf_badi = wf_badi + 1 .
            SELECT SINGLE text INTO wf_txt
            FROM sxs_attrt
            WHERE sprsl = sy-langu
            AND exit_name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED ON.
        ENDCASE.
        WRITE:/1 sy-vline,
        2 wa_tadir-obj_name HOTSPOT ON,
        41 sy-vline ,
        42 wf_txt,
        105 sy-vline.
        AT END OF object.
          WRITE : /(105) sy-uline.
        ENDAT.
      ENDLOOP.
      WRITE:/(105) sy-uline.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No.of Exits:' , wf_smod.
      WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
    WHEN 'SMOD'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    WHEN 'SXSD'.
      SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
      CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat.

To find the User Exits for a particular Transaction.

hi,
    I want to find the number of User Exits for a The Transaction MM01 or MM02,
    I serched in the forums but could not find satisfactory ans,
    I tried with:
             T.Code-> System>Status->Prog Name>SE38>find Call Customer-Exit.
    But its not helping me,
    Please help me.
Thanks and Regards
Suraj S Nair.

hi ,
if you are new to user exist use --> follw the below methos to find the user exit for a particular transaction or t-code
create one custom pgm in se38 and execute >selection screenenter t-code and execute it will return all the user exists for a specific transaction..
Finding the user-exits of a SAP transaction code
* Finding the user-exits of a SAP transaction code
* Enter the transaction code in which you are looking for the user-exit
* and it will list you the list of user-exits in the transaction code.
* Also a drill down is possible which will help you to branch to SMOD.
* Written by : SAP Basis, ABAP Programming and Other IMG Stuff
*              http://www.sap-img.com
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
Regards,
Prabhudas

User Exit for ME21 PO Creation at the time of saving--Urgent

Hi,
Can some one help me out in finding the user exit for PO creation at the time of saving.
The Requirement is:
I need to create a custom field in EKKO table.
After appending the structure with the field to the EKKO table, i need to create a PO.
Now i need to update the field which has been created at the time of pressing the SAVE button.
I need to update the EKKO table it self.
I could find the user exits but none of them have the EKKO table either in Changing or in Tables.
Thanks,

Hi,
You may want to check this user exits.
EXIT_SAPMM06E_012 - Check Customer-Specific Data Before Saving
EXIT_SAPMM06E_013 - Update Customer-Specific Data in Purchasing Document
Here is the list of available user exits for ME21.
EXIT_SAPMM06E_001 - Other Number Range or Own Document Number
EXIT_SAPMM06E_004 - User Exit for Cust.-Specific Control of Import Data Screens in Purchasing
EXIT_SAPMM06E_005 - Field Selection Control: Vendor Address Screen
EXIT_SAPMM06E_006 - Export Data to Customer Subscreen for Purchasing Document Header (PBO)
EXIT_SAPMM06E_007 - Export Data to Customer Subscreen for Purchasing Document Header (PAI)
EXIT_SAPMM06E_008 - Import Data from Customer Subscreen for Purchasing Document Header
EXIT_SAPMM06E_009 - Reset Customer Data at Beginning of New Document (Without Dialog)
EXIT_SAPMM06E_012 - Check Customer-Specific Data Before Saving
EXIT_SAPMM06E_013 - Update Customer-Specific Data in Purchasing Document
EXIT_SAPMM06E_014 - Read Customer-Specific Data when Importing Purchasing Document
EXIT_SAPMM06E_016 - Export Data to Customer Subscreen for Purchasing Document Item (PBO)
EXIT_SAPMM06E_017 - Export Data to Customer Subscreen for Purchasing Document Item (PAI)
EXIT_SAPMM06E_018 - Import Data from Customer Subscreen for Purchasing Document Item
EXIT_SAPMM06E_020 - User Exit: Change Document for Requisitions (Conversion into PO)
EXIT_SAPMM06E_021 - Fulfillment of Target Value: Release Orders Against a Contract
<b>Reward points</b>
Regards

A user exit for table KONV

Similar Messages

Maybe you are looking for