A/V Connection Settings

I recently purchased a Pioneer VSX-1020-K and a Samsung UN55C6300 LED TV.
I have connected the satelite STB to the receiver using an HDMI cable. I then connected the receiver to the TV using an HDMI cable. I am using the receiver to control all of the components. The problem I am having is the TV is not recognizing that the receiver signal is on SAT/TV when I turn on both components. It says NO SIGNAL. The TV will recognize the receiver once I use the receiver's remote control to switch from SAT/TV to aonther input and then back again. Once this happens the TV then recognizes the signal and will display a picture. Is there something not configured correctly?

Probably a timing issue with pulses sent from your remote. If the remote does not have the facility to adjust sequence/timing of remote commands, suggest you buy a Logitech Harmony remote, which does have that capability. If you decide to go the Harmony route, you will not regret it. It puts every other remote control to shame, bar none...
If you find my post useful or informative, please click the icon below with the plus sign and star to give kudos. Thank you!

Similar Messages

How to use JNDI datasource instead of database connection settings JDev 10g

Hi,
In order to use the different database from other environments, we are not able to use the JNDI datasource configuration settings, all the time need to configure the database connection settings from JDeveloper by changing the database connectivity settings in the JDeveloper for each environment separately, need a solution on how to make the database connectivity unique using the JNDI datasource name for all the environments for database connectivity settings through the application server console rather than changing the database adapter configuration in JDeveloper.
Please provide the update at the earliest. Your help is greatly appreciated. Thanks in advance..

What are you not clear on?
What you need to do is get your developers to conform to a database naming standard, as stated above, so if you have an oracle database that is for eBusiness Suite you get all developers to create a DB connection in JDev called, ora_esb as an example.
When the developer creates a DB adapter this will create a JNDI name of eis/DB/ora_ebs. When the BPEL project is deployed it looks for the JNDI name in the oc4j-ra.xml file to see its connection details. If they don't exist then they use the developers connection details. The issue with this is that they generally always point to the development DB. It is best practice for the developers to remove the mcf settings in the DB adapter WSDL. This way if the JNDI name has not been configured it will fail.
So when you migrate from dev-test-prod what you have is the JNDI name eis/DB/ora_ebs. The dev points to the dev instance of ebs, test points to the test instance and so on. This means that you don't need to adjust any code in the BPEL projects.
cheers
James

Are there any connection settings for using rtsp:...

In my effort to get access in 'YouTube" steaming videos, I tried to find the scope available in Nokia 3110C handset. After going through the Menu icons, I identified one Menu Item in the path : MAIN MANU>MEDIA>MEDIA PLAYER>GO TO ADDRESS. It is...rtsp://. The help message states ...'Lets you manually enter Web Address...'. I entered : ' rtsp//m.youtube.com. The response was a Note which reads - Check Connection Settings... Again I followed the above path : MAIN MANU>MEDIA>MEDIA PLAYER>STREAM SETT. I click the Stream Settings. The nesponsing note : 'No Settings found. Contact your Service Provider'. So, from the above discussion the net learning I got is I must have the Stream Settings to get YouTube going in my Set. My querry is : Whare those settings and what is the source in getting those settings ? I understood the rtsp (Real Time Stream Protocol) is more versatile than HTTP and MMS in getting Streaming data (numerical, photograph/radio). Please suggest.

I experienced same problem with my 3110c handset. At first the STREAMING SETT was shadowed dark with a restriction to get access there. Later I got contact with BSNL (my SP). After downloading the settings I discovered that the shadowy patch over Streaming Sett. has gone. It now shows an entry ..."bsnlstream."
So far an attempt was made to activate the Youtube, a message reminds me that the software of 3110C is not supporting such application.

XI and R/3 System connection settings for IDOC to File scenerio.

Hi SAP champs,
I am working on a IDOC to File XI scenerio. But I am confused while configuring connection settings at XI system and R/3 system. I am finding problem in transaction IDX2 to maintain the IDOC metadata. Please let me know the complete step by step system cofigurations in XI and R/3 systems for the scenerio. Thanks in advance..
Regards
Sanjeev.

Hi Sanjeev,
We upload Medata in IDX2 to just reduce runtime effort and hence to improve the performance. However it is not a mandetory step to be performed for R/3 TO XI scenario.
You are confused just because here you dont find any F4 help to select the metadata and the PORT.
Thanks
Sunil Singh

You may need to configure the connection settings in the deployment descrip

Hi All
I am new to BPEL and going through Order Booking Tutorial (using 10.1.3.4 version of opmn ) .
I have a problem in 'Designing the Database Adapter to Insert Data' Chapter.
I have installed Oracle 10g Express Edition and BPEL Process Manager on my local system.
In the Example it has been asked to create a daabase connection with Third Party JDBC Driver. Instead I have created a database connection with Oracle(JDBC) Driver.So i didnt have to register any third party driver.
I cud access the Order/OrderItems table as well .
I Deployed the same on the server.But while running the process I get following error--
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
nested exception is:
     ORABPEL-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore. [Caused by: Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
The Connection descriptor used by the client was:
localhost:1521:XE
See root exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml) and restart the server. Caused by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.4.0) (Build 080602)): oracle.toplink.exceptions.DatabaseException
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I have checked several post on this error but every post talks about third party database.I have used Oracle Database only so why/What shud I change anything in oc4j-ra.xml?? This is my doubt .
Pls help me on this .Also Let me knowe in my case is there any need to create the datasource.?I am low at concept of database.
Pls help
Regards
Naveen

Hi
I am trying to insert orader and order Items as given in the Order booking tutorial..
Here are the files description
.wsdl file looks like
<service name="DBInsert">
<port name="DBInsert_pt" binding="tns:DBInsert_binding">
<jca:address location="eis/DB/MyConnection"
UIConnectionName="MyConnection"
ManagedConnectionFactory="oracle.tip.adapter.db.DBManagedConnectionFactory"
mcf.DriverClassName="oracle.jdbc.OracleDriver"
mcf.PlatformClassName="oracle.toplink.platform.database.oracle.OraclePlatform"
mcf.ConnectionString="jdbc:oracle:thin:@localhost:1521:XE"
mcf.UserName="system"
mcf.Password="6672B62098892995C8B651EFDF798A59"
/>
</port>
</service>
data source file looks like
<connection-pool name="MyConnection">

<connection-factory factory-class="oracle.jdbc.OracleDriver" user="orabpel" password="->pwForOrabpel" url="jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=tcp)(HOST=nakhanna)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=XE)))"/>
</connection-pool>
<managed-data-source name="MyConnection" connection-pool-name="MyConnection" jndi-name="jdbc/MyConnectionDS"/>
</data-sources>
oc4j-ra.xml looks like
<connector-factory location="eis/DB/MyConnection" connector-name="Database Adapter">
          <config-property name="xADataSourceName" value="jdbc/MyConnectionDS"/>
          <config-property name="dataSourceName" value=""/>
          <config-property name="platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/>
          <config-property name="usesNativeSequencing" value="true"/>
          <config-property name="sequencePreallocationSize" value="50"/>
          <config-property name="defaultNChar" value="false"/>
          <config-property name="usesBatchWriting" value="true"/>
          <connection-pooling use="none">
          </connection-pooling>
          <security-config use="none">
          </security-config>
     </connector-factory>
##################################################################3
Still I get the same error .
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="summary"><summary>file:/C:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_FulfillOrder_4.0_e77c64251e45eb4711a3a093f92e6a86.tmp/DBInsert.wsdl [ DBInsert_ptt::merge(OrdersCollection) ] - WSIF JCA Execute of operation 'merge' failed due to: java.util.MissingResourceException
java.util.MissingResourceException
; nested exception is:
     ORABPEL-00001
java.util.MissingResourceException
java.util.MissingResourceException
java.util.MissingResourceException
</summary>
</part><part name="detail"><detail>null</detail>
</part></bindingFault>
Pls let me know if something looks wrong in the above files
Thanks
naveen

Unable to apply connection settings. The detailed error message is: 'NoCount' is not a recognized option

My corporate database wizards have created a login for my small subsidiary to use to read selected data from the HR database. It's meant to be used by an SSIS package to bring over data on who's a current employee and who's not.
The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login I get the following message:
"Unable to apply connection settings. The detailed error message is" 'NoCount' is not a recognized option."
If I click on OK I can still log in, but it looks like this error is causing SSIS to produce an error. I've seen articles on vaguely similar errors logging onto an Azure database, but this one's on SQL Server 2012.
Anybody got any ideas? Is there something I can change at my end, or is it a change that has to be made in the remote DB?

I'm getting confused seeing this
The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login
I get the following message:
Whats the purpose of SSIS package if you're trying to connect to DB using SSMS?
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Help required with (soundcard) connection / settings, thanks in advan

Help required with connection / settings between a Creative Sound Blaster Audigy Platinum EX (soundcard) and a Creative DTT3500 Digital (5. speakers).
The problem
No sound from any of the speakers. (Exception can plug in headphones at front)
Background
My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). However after reconnecting speakers and restoring the original settings I?m getting no sound from any of the speakers. I?ve followed all the available advice/instructions I can find on this website and manuals to no avail.
Set-up
Physical
(Digital DIN) Speakers/decoder amplifier (DTT3500) connected to the (digital out) soundcard (Audigy Platinum EX) using minijack to DIN cable. (As per instruction manual)
Software
Creative Audio Consul ? setting as per instructions, however have tried variations in vain. (Note: above tabs there is a select device box with SB Audigy [A0000] in it ? only option. Just wondering what [A0000] means?)
Your advice please. A simple step by step guide would be appreciated, many thanks in advance, Jon

"My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). "
Do you have the original installation disk?
If so, try installing THOSE drivers, ESPECIALLY if it worked before. Be sure to uninstall what is there now, first.
Its natural for most people to want the 'latest' drivers for their hardware. However:
After experiencing some difficulties with some CL 'updates' for certain products, I now avoid them UNLESS I am having a PROBLEM with the existing drivers.

Can you retrieve a task list for a user without specifying that user's connection settings?

Hi
I would like to know if it is possible to obtain a list of workspace tasks for a user of my choice. In the following code, taken from the relevant quickstart, I am able to retrieve a list of tasks for "administrator" because it is the "administrator" settings specified in the connection properties when obtaining an instance of ServiceClientFactory. If I wanted to obtain a list of tasks for user "greg", for example, is there a way I can do this without having to specify the settings for "greg" in the connection properties? I tried to invoke the setUserId() method of the TaskFilter interface but no tasks are returned for user "greg" in that scenario. The aforesaid user has 3 tasks assigned to him. If I specify the user name and password for "greg" in connection settings, I am able to retrieve his list of tasks successfully. However, this is undesirable because I want to be able to retrieve a list of tasks for any user of my choice, by passing a parameter. Is that possible? Code follows:
//Start of code
import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
import com.adobe.idp.taskmanager.dsc.client.TaskManagerClientFactory;
import com.adobe.idp.taskmanager.dsc.client.TaskManagerQueryService;
import com.adobe.idp.taskmanager.dsc.client.query.StatusFilter;
import com.adobe.idp.taskmanager.dsc.client.query.TaskFilter;
import com.adobe.idp.taskmanager.dsc.client.query.TaskRow;
import java.util.Iterator;
import java.util.List;
import java.util.Properties;
public class RetrieveTaskInfo {
    public static void main(String[] args) {
        try {
            //Set connection properties required to invoke LiveCycle
            Properties connectionProps = new Properties();
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_EJB_ENDPOINT, "jnp://localhost:1099");
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,Service ClientFactoryProperties.DSC_EJB_PROTOCOL);
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
            //Create a ServiceClientFactory object
            ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
            //Create a TaskManagerQueryService object
            TaskManagerQueryService queryManager = TaskManagerClientFactory.getQueryManager(myFactory);
            //Define search criteria by performing a search on
            //Assigned tasks (tasks assigned to the user specified
            //in connection properties)
            TaskFilter filter = queryManager.newTaskFilter();
            StatusFilter sf = filter.newStatusFilter();
            sf.addStatus(StatusFilter.assigned);
            filter.setStatusFiltering(sf);
            //Perform the search
            List result = queryManager.taskList(filter);
            //Create an Iterator object and iterate through
            //the List object
            Iterator iter = result.iterator();
            while (iter.hasNext()) {
                TaskRow myTask = (TaskRow)iter.next();
                //Get the task identifier value
                long taskId = myTask.getTaskId();
                //Get the status of the task
                long taskStatus = myTask.getTaskStatus();
                //Get the name of process on which this task is based
                String processName = myTask.getProcessName();
                //Get the task description
                String taskDes = myTask.getDescription();
                System.out.println("The task identifier is " + taskId + "\n" +
                        "The status of the task is " + taskStatus + "\n" +
                        "The name of the process on which the task is based is " + processName + "\n" +
                        "The task description is " + taskDes);
        } catch(Exception e) {
            e.printStackTrace();
//End of code
Thanks
Darren

Paul,
Thanks very much, I never tried just asking for the parameter I was looking at the entire list coming back from a query with no filters. Using the DBMS_LDAP package you can in fact get their GUID.
I understand your concern for the use of the field and for other reasons have moved to a different identifier to tie OID accounts to our internal application user accounts.
Thanks very much, I'm still glad to know how to do get at the info.

Is there a way to password protect the access options pannel, in particular the Connection Settings?

Is there a way that access to the Options panel can be locked by an administrator. In particular I would like to block a user from being able to change the proxy server settings in Tools > Options > Advanced > Network > Connection Settings. I would like to be able to lock the settings to (Use system proxy settings). The OS is windows 7 standard user account controlled by a windows small business server 2008.

You can lock the related network.http prefs to prevent users from changing the settings.<br />
That will only make it impossible to change the prefs on the <b>about:config</b> page directly.
*http://kb.mozillazine.org/network.proxy.type
*http://kb.mozillazine.org/network.proxy.%28protocol%29
*http://kb.mozillazine.org/network.proxy.%28protocol%29_port
Use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
See:
*http://kb.mozillazine.org/Locking_preferences
These functions can be used in the mozilla.cfg file:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes

Settings connectivity settings for nokia N8 does...

i have a problem with my nokia N8 that when i try to go to Settings>>connectivity>settings> its again reverts me back to the main menu.....kindly please help me how to slove this problm/
thanks in advance.

You should also be able to set all wigets to offline from options on homescreen ? And if you can get into connectivity settings, set phone to Offline , then edit all access points to always ask, then decline when you don't want an app to connect to the web !!
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Migration of EA3 connection settings into the final SQL-Developer 3.0

The automatic connection migration of EA3 (3.0.03.97) connections into the final version 3.0 does not work. Any ideas what's wrong? I am using several folders to hold many connections to different database servers and database users. The migration of EA2 (3.0.0.45) connection settings was successful.

Doesn't either with EA4.
Only solution is to export them from your previous version (right-click Connections), then import into the new one.
Have fun,
K.

GUI Bug / Suggestion - View Network Connection Settings

I'm currently running Windows Server Technical Preview in a VMware Workstation environment. When I click on the network icon in the system tray, and then proceed to click on "View Network Connection Settings", nothing happens. Is this
a bug?
I know in the desktop OS this opens PC Settings which doesn't exist in Server, but it makes sense for this button to link to "Network Connections" or even "Network and Sharing Center" in Server.

Enable Desktop Experience. Server with a GUI is not the full GUI, you need to enable Desktop Experience (on User Interface options), Fax Server (for Windows Fax and Scan), Server Backup, wireless, XPS Viewer and GUI for Windows Defender, to make use of
the full graphical experience. Some shortcuts and elements in the GUI make sense only after you activate thoose functions. Windows Server seems a modified version of Windows client x64, more or less, some leftovers from the client origin still remain
in the server version. Some client features are present, but turned off by default, if you want to experiment, you can enable them. Windows Server can become very close to the Windows client, if you know what to turn on.

PI Configuration and connection settings between SAP ERP and peoplesoft

Can someone please share some docs or the link for the PI Configuration and connection settings for the connection between SAP ERP and people soft system. Thanks in advnce
Regards
krish

Hello,
The following links will be helpful in this regard:
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nwpi711/helpdata/en/d9/f3d22f01c741bdb0e62a2f4205411c/content.htm

Connection Settings between Content Server and DMS server

Dears,
I installed DMS server and Content Server,Now I need to do connection settings between these server.
Both are installed on seprate servers.
So please suggest what are the steps to set connection between these servers.
Shivam

Hi all,
I installed the Content Server with DB instance. ECC on AIX and the Content Server on Windows are on different domains and wanted to integrate. After the installation what I did is as follows...
I am trying to create the Content Repository using the Tx- OAC0, given the the following details as
Content Repository name--- DMS_xxxx
Document Area - DMS
Storage Type -- HTTP Content Server
Version -0046
HTTP Server --- fully qualified host name of the Content Server
Port Number --- 1090
HTTP Script --- ContentServer\ContentServer.dll
Physical Basic Path--- (initially) -
/usr/sap/<ECCSID>/SYS/global/
(modified) --- E:\ContentServer\ -
not available, thought it will create, even created later
Physical archive path --- SAME as Physical Basic Path
When I check the connection, I am getting an error "Content repository DMS_xxxx does not exists.
When I check Tx- CSADMIN-- it gives an error saying the "HTTP error : 4010 (authorized) ' Permission denied: adminContRep&configSet"
I am not sure what user should i use for this and what should be the information of ContentStorageHost, ContentStorageName and Storage need to be provided.
Please help me in this....
Regards
Krishna

"Check Connection Settings" msg in 6070

I have a Nokia 6070. When I turn the phone on I get a red "STOP" sign and it says "Check Connection Settings". I have checked my settings and all seems to be OK. I can receive e-mails and I can send and receive SMS messages. Does anyone have any ideas as to what this problem is an how to resolve it. It doesn't seem to stop me doing what i want or need, it's just so annoying !. Already went several times to the shop where I bought the phone, but not help at all from them. Thanks!!.

I'm guessing this probably refers to your internet connectivity via GPRS or similar.
I would contact your network provider and report the symptoms to them and they should have further information regarding this issue. Most likely they will send you a SMS update message which will reset your GPRS/WAP/internet connectivity.
Regards,
Edward

Firefox will not save my Connections settings, so opens on manual proxy every time, rather than No Proxy?

I'm using Firefox 4.01 and it will not save my connections settings when I set them to "No Proxy" keeps defaulting to manual therefore it wont load any pages until I change it to "No Proxy" which I have to do every time I open firefox.

See:
* http://kb.mozillazine.org/Preferences_not_saved

A/V Connection Settings

Similar Messages

Maybe you are looking for