A/V controls disabled QT

I recently tried to view the iPhone keynote address. However, no sound but video was fine. When opening A/V controls, I can adjust hue and brightness, but the audio sliders are "gray" and disabled. volume is completly down but I cannot adjust.

No. The A/V adjustments are not a permanent setting and are file by file.
The only way to adjust the volume of a streaming file (outside of system sound settings) is to use the Movie Properties settings available in QuickTime Pro.
Since you say you don't even get audio I think there is something wrong with your Transport Setup settings.
QuickTime System Preference Pane/Advanced tab
switch from "Automatic" to "Custom" and try HTTP and port 80.

Similar Messages

Why does Parental Controls disable bonjour?

Why does Parental Controls disable bonjour?

my kids at age 7 are not allowed on the internet and I have to make a safe website list on my wifi router.
I know if they bring it to a friends house then its will be wide open and they are not allowed to do so yet.
I hope a kids safe app will be made or some parental controls to be made available soon
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Help - Creative WebCam Audio Control disabled

Hi, Just set up my Creative Live Vouce webcam for Skype use and everything is going well but when I select the WebCam Audio Control to play with the different settings it appears to be disabled. No option is highlighted and I can't select any of the options. Any thoughts?Thanks.

Yeah, it's very strange - I've been fiddling with it since; basically I get sound more often than not now when I turn it on.
When I plug in the headphones they always work - the problem seems to be the decoder; it jumps away from the dolby PLII settings to stereo, and obviously coming in through the optical cable there's no stereo...
Could it be something like a dodgy DIN cable, or is it something more serious?
It's become less of an issue now - it only cuts out occasionally, which while annoying is bearable.
Any help would be great.

Report Viewer control disabled in aspx page

Hi All,
I am trying to generate a report with data pulled from one of a SharePoint list and binding it to report viewer control. The binding happens fine through code. Page is actually a layout based and deployed to one of folder in layouts and in the
same folder the rdlc file resides. But when the aspx page is opened in SharePoint site, the report viewer control appears as disabled. We are using visual studio 2012 and SharePoint 2013 setup to generate the report. Does anyone have idea how to fix this
issue
Regards RCP

You can get the report viewer disabled if scripts aren't enabled.
Check your browser settings.
I should imagine if the correct scripts aren't served with the control for whatever reason then the same problem could occur.
You might want to consider posting the question on the sharepoint forum. I know configuring SharePoint is notoriously tricky and that might be your issue here.
But I don't do sharepoint.

Table Control: Disabling editing for a column

Hi everyone. Greetings from Buenos Aires, Argentina.
First of all, I want to apologize for this question in case of it has already been made. The forum is too large to read it completely and I really need the answer, if any, to my trouble.
I have a table control inside a screen. In it's PBO, I coded a module to change the table control attributes. I declared a work area like the line of the table control's control in order to loop it. I mean this:
In the TOP of Table Control (I made it by using the wizard) I have this:
CONTROLS: TC_1 TYPE TABLE VIEW USING SCREEN dynpro_number)
And in the PBO module I have typed the following:
MODULE control_change_attrs OUTPUT.
DATA: wa_tc_1 LIKE LINE OF TC_1-COLS.
LOOP AT TC_1-COLS INTO wa_tc_1.
ENDLOOP.
ENDMODULE.
In the (...), I have put code with such a logic that, depending of the contents of certain fields in the dynpro, it will hide (or not) some columns of the Table Control. This part is made correctly.
This logic, also makes (or should make) the table control to disable the input of a column, depending wether a flag is active or not. This flag is activated in other screen's PAI, which is called depending on the contents of the sy-ucomm field of this screen (the one with the table control).
The (...) is something like this (I'll omit some parts):
IF wa_tc_1-screen-name = 'COLUMN_TO_HIDE'.
   IF gv_flag = 'X'.
      wa_tc_1-screen-input = 0.
   ENDIF.
   MODIFY TC_1-COLS FROM wa_tc_1.
ENDIF.
In a PAI module of this screen, I have coded the following:
MODULE user_command INPUT.
CASE gv_ok_code.
   WHEN 'RUN'.
      PERFORM RUN.
    WHEN ...
ENDCASE.
END MODULE.
And in the RUN subroutine, obviusly among other things, I have this:
CALL SCREEN 0150 STARTING AT XX YY.
In a module in the PBO of the screen 0150, I clear gv_ok_code. In a PAI module, this is what I have put:
CASE gv_ok_code.
   WHEN 'ACCEPT'.
      gv_flag = 'X'.
      CLEAR gv_ok_code.
      LEAVE TO SCREEN 0.
WHEN ...
WHEN ...
ENDCASE
The thing is, when the contents of gv_ok_code is 'ACCEPT' and therefore the flag is activated, then the 0150 screen's PAI finishes and the previous screen's PBO is processed, I know for sure (by the mean of the debugging mode) that the table controls's atrributes are correctly modified, and the most important thing, they stay like that... But, the column desired does not gets disabled, at least not until the NEXT PBO (I mean, it gets disabled when I press the Enter key).
Why is happening this?

Thanks a lot for the response, Max.
I' ve been testing your answer. When I implemented the code that you suggested, after the first PAI, the table control's columns appear as I want.
The thing is, in order to test if the changes in the columns are reflected in the screen after the call of the dynpro no. 0150 (and the obvious return to the first one), I need to be able to select one or more table control's rows (since when I followed the table control wizard, I made it with selection column, and with multiple selection). But, after implementing your code, I'm not able any longer to select any rows.
I click on them, but they don't turn yellow. I commented the call of the module inside the LOOP AT itab... of the PBO and I was able to select them once again, so we're sure the problem is caused because of the call to this new module. But why?
Note: you should know, since the table control is with multilpe selection, the LOOP sentence in the PBO is like this:
LOOP AT itable
       INTO work_area
       CONTROL tc_1
       WITH CURSOR tc_1-current_line.
MODULE change_attribs.
ENDLOOP.
Does that give a hint to you?

Table control disables all the lines

hi Goo day,
i have worked a lot on on TC and am struggling to get it right with the insert option.
i have button on the main screen where i read the data and fill the table control and display on the RADIO Button How many records are in the TC.
So i click the button and get into the TC but accept the records that i have displayed will all be disabled. even if i try to enable a line by insert i cant do it.
PROCESS AFTER INPUT.
LOOP AT IT_WAGON.
   chain.
   field : IT_WAGON-TRAIN_NUM,
           IT_WAGON-DELAY_MIN.
    MODULE modify_tabview_wagon.
   endchain.
ENDLOOP.
   IF sy-ucomm = 'INST'.
      DESCRIBE TABLE it_wagon LINES v_count.
     ADD 1 TO v_count.
     INSERT it_wagon INDEX v_count.
    ENDIF.
i want to know why they are are disabled.
what can i do to overcome.

Do this in the PBO.
rob

Numeric Control Disable

Hi, I have a numeric control. I want to disable the option of having the user enter a number and hit enter. I only want them to be able to use the up and down arrows to change the control. Is this possible and how do i implement this? Thanks!

Wait...I posted the wrong one
EDIT: Actually I didn't post the wrong one...When you save this make sure you save it disk then place the control on the front panel....I added it the block diagram via drag/drop, but came in as a constant (which I converted to a control), and it didn't work right....So save it, then add the control to the front panel via the controls pallete.
Message Edited by TWGomez on 04-22-2008 07:15 AM
Use the rating system, otherwise its useless; and please don't forget to tip your waiters!
using LV 2010 SP 1, Windows 7
Attachments:
Control 1.ctl ‏5 KB

Blur control disabled for Drop Shadow Effect and Filter

Win2k Pro
2GB Ram
AICS 11.0.0
This is odd: the blur control in the Drop Shadow Effect and Filter dialog boxes is disabled. It seems to me there was a time it was ENabled.
This is the situation for both vector and bitmap objects. I've played with Document Raster Settings.
Truth be told, I _did_ reinstall Illustrator last year and have not used it much since.
Any insights you can share?
Thanks

Please excuse this post ... didn't mean for it to appear as a reply under another post. My apology. lk <[email protected]> wrote in message news:[email protected].. >I purchased a vector image from istockphoto ... when I opened the file in > illustrator it is just an outline without color. I select the outlines > but > can't fill it with color! What am I missing? > > > > > > <[email protected]> wrote in message > news:[email protected].. >> Win2k Pro >> 2GB Ram >> AICS 11.0.0 >> >> This is odd: the blur control in the Drop Shadow Effect and Filter dialog >> boxes is disabled. It seems to me there was a time it was ENabled. >> >> This is the situation for both vector and bitmap objects. I've played >> with >> Document Raster Settings. >> >> Truth be told, I _did_ reinstall Illustrator last year and have not used >> it much since. >> >> Any insights you can share? >> >> Thanks >

IB51, IB52 : Page up & Page Down option for table control disabled

Hi experts,
IB51, IB52 Page up & Page Down option for table control is disabled.
We want to use these options in the table control while recording .
Can any one tell us?
Regards,
Lakshmi

Hi,
You can refer to Note 379208 .
The same is applicable in CRM too.
Thanks ,
Jomy

IMovie 10.0.3 on OSX 10.9.4 speed controls disabled on new projects

Hi,
Since iMovie 10.0.3 / OS X 10.9.4, the speed controls are disabled / greyed out for all clips added to new projects.
However, I can still use the speed function on existing projects created prior the upgrade.
Video Clips were shot with iPhone 5 and are imported from iPhoto.
Do anyone experience the same issue ?
And is there a workaround to this problem ?
Thanks.

*** update ***
This bug only applies to new projects.
I can still use the speed function on existing projects created prior the iMovie/OS X upgrade.
I've just updated iMovie to 10.0.4 but the problem remains.
Do anyone experience the same issue ?
And is there a workaround to this problem ?
I found a workaround for this issue, but it's neither convenient nor elegant. You have to duplicate and old project, created prior the last OS X update or prior the iMovie 10.0.3 or 10.0.4 upgrade, and remove all clips off the duplicated project, and there you have a clean project were all clips you'll add will be speed controls capable.
Thanks.

Why are ribbon controls disabled even with full control?

I have full control of both of my sites however the controls on the ribbon are disabled. If I use the drop down menu on the library or list item I can utilize those controls. Is there a setting I disabled? The sites have been set-up for about 6 months
and now all of a sudden the controls are greyed out.
Lyndsey

Hi all:
I am a site collection admin on my farm and I am facing similar issue.
ON all the lists, the View item and Edit item is disabled in ribbon. Moreover, the same options are enabled when accessed the site from the server itself.
Let me know if any body has any solution to the same.
Regards,
Joeprakash

Audio Controls Disabled with Firewire Interface?

I've found a few references to this in other posts from the past, but rarely and never with any answer or solution.
I just replaced my cheapo USB audio interface with a *Tapco Link.Firewire* interface. It works and sounds fantastic except for one issue that is a huge problem for my set up, and one I never anticipated.
With the firewire interface selected, Mac OS X disables all volume and mute controls. This means the only way to adjust volume control is with the knob on the interface.
The USB interface I was previously using worked like a charm with the native OS X volume controls, and it just doesn't seem right that I am locked out. I rely very much on the Apple remote and keyboard volume controls, especially the muting button.
If there is a solution for this, a different driver I could install, I would love to know about it. There are no drivers from Tapco, they say it just works with Core Audio.
Is this normal for these firewire interfaces or did I just maybe get a dud?

When I use my FW interface (Ultralite) my laptop volume controls don't work, I have to use the volume control on the interface, my monitors' volume control or volume controls within any software I'm using.
It's normal.

All "Play" controls disabled

I'm a brand-new Flash user who has just installed Flash CS3.
I've done a couple of tutorials and today bought a copy of "Flash
CS3 Professional Visual Quickstart Guide."
I've gotten into a situation that neither this book nor the
online help seems to address:
In my Control menu, all of the items related to playing the
movie (except Test Movie and Test Scene) are disabled. I cannot
Play, Rewind, Go to End, or Step Forward or Backward One Frame. The
period and comma keys don't do anything. Also, the buttons on the
Controller toolbar are all disabled, and I cannot move the Playhead
manually. It's "stuck" in Frame 1.
I closed Flash and then re-opened this .fla file. The result
is the same--the playback controls are still disabled.
(BTW, Control > Test Movie works, and my movie plays as
expected. But I want to inspect things in a specific frame.)
I'd appreciate advice on how I managed to get into this
situation, and what to do to remedy the problem.
Thanks,
Bill

stopAllSounds() will stop all currently playing sounds. it
will not stop sounds instantiated in the future from
starting.

All View controls disabled when in Transform dialogue... WHY?

Transform Each. A reasonably useful, if minimalistic dialog box disables ALL view controls.
Including Zoom and Pan.
And of course the really useful stuff, like hide Bounding Boxes and Frames/Edges and Guides... they also don't work.
Why such a monochromatic and linear way of working in 2013?
Has Adobe spent NON of its record profits on hiring more programmers?
Are their any scripts that get around this heinous oversight, left over from what... 1995?

Again: The users here cannot tell you why. Illustrator is a very old and archaic program that has not kept up with the times. But you already know that.
Or is there another explanation?
There are other speculations. Mine is simply that the user base continues to tolerate it. In the end, that's why. If you need further explanation, read on:
Adobe created PostScript in the 80s. Adobe has dominated the graphics industry ever since. So people buy Illustrator because it carries the Adobe brand. None of this has changed.
It becomes a self-fullfilling cycle. Newcomers buy Illustrator early-on assuming it is the "safe bet" because it carries the Adobe brand. As a result, most Illustrator users have very little experience with any other mainstream 2D Bezier drawing programs, if any at all. Longtime Illustrator-only users become increasingly vested in its archaic and cumbersome interface and fearful of having to apply that kind of learning effort to any other program. They--in self-protective turn--advise newcomers that it is the "professional" choice; the "safe bet."
So the cycle repeats.
Illustrator-only users assume Illustrator's feature set to be "state of the art" for its software category. Adobe's marketing, of course, sustains this myth.
And a comedy of absurdity ensues. Literal decades pass before Illustrator users realize that "page 2" is not only possible but valuable in a drawing program. The year 2013 (and who knows how many more) comes and goes without Illustrator ever acquiring the most basic functionality of a proper set of basic live geometric shape tools. You are just discovering this. But it is nothing new. It's the way it's always been.
Adobe continues to market the same archaic functional underpinnings with occasional window-dressing changes of the UI skin. Functionality long taken for granted in other Bezier drawing programs is only occasionally added and even then in a half-baked fashion being hamstrung by devoted adherance to an outdated interface foundation which Adobe dares not change lest risk alienating existing users.
The interface becomes increasingly scattered, cluttered, redundant, inconsistent and old-fashioned despite its ever-changing stylistic facade. The resulting complicated confusion is perceived by newcomers as "powerful" and "full featured" thinking that must be why it's so unintuitve. They come here to ask "how" and to become vested in the highly esoteric learning curve.
And the cycle repeats.
Other vendors try to capture/maintain market share by emulating the most prevalent interface schema in hopes of easing the "transition" to their products. They concentrate more on replicating the same old Illustrator functionality than on innovation, even when their interface foundations are superior. Illustrator's interface scheme becomes the defacto standard and the whole software segment stagnates in an endless cycle of "me, too" offerings.
Illustrator's domination thereby effectively holds the entire segment in decades-old lethargy. Users become adicted to the same old mediocrity.
Meanwhile, other graphics softwares in growth segments march on. The users of 3D modeling, for example, enjoy a plethora of different interface schemes, each competing to deliver both superior functionality and a superior user experience. The user base assumes a stance of versatility and adaptability and is less dogmatically defensive of a paticular software. Obtaining and maintaining working proficiency in multiple programs is considered the norm. And the category advances, becoming more powerful even while becoming more affordable (growth).
Energetic beginners devote their efforts to energetic developments: mobile apps and platforms, scripting, data-driven solutions, gaming. Open source innovates in terms of business model, if not in terms of software functionality, and delivers powerful apps at near zero price.
And everyone yawns at the 2D drawing segment and "yesterday's news" appears increasingly archaic as its stagnation continues. And it sadly continues to fail to achieve its yet-to-be-realized potential.
Eventually self-fullfilling cycles are broken. Eventually. The latest disturbance to this particular cycle comes from Adobe itself: It's self-defensive, self-perpetuating rent-only license scheme.
It is yet to be seen if this also becomes a trend with other software vendors, or if it breaks Adobe's stranglehold on the market. If tolerated by the user base, it certainly becomes more revenue-generating for the vendor (at least for a time) and self-perpetuating as customers willingly become entrapped by vendor-specific dependency. That lets the vendor deliver less value at same (or even less) cost, while maintaining same (or even higher) price. It's every software vendor's dream.
It's every monopolist's dream. It's every socialist's dream. And it works (for a time) if only enough customers are successully are suckered into it. But eventually, even Berlin Walls and long-distance phone call pricing schemes come down. The cost and pain of the self-protective, self-perpetuating cycle's end is directly proportional to how long its damage is allowed to continue. It's best to nip such cycles in the bud. But history proves that doesn't always happen.
So there's your reason "why": It's what the customers buy, driven by what they buy into.
JET

Dynamic Opportunity Pipeline - control disable

Dear Expert,
In Sales Opportunity Report->Opportunity Pipeline -> Dynamic Opportunity Pipeline, the controls( Play, Stop, Remind, Forward) are disabled. How to enable them.

Dear Expert,
In Sales Opportunity Report->Opportunity Pipeline -> Dynamic Opportunity Pipeline, the controls( Play, Stop, Remind, Forward) are disabled. How to enable them. Please help me

A/V controls disabled QT

Similar Messages

Maybe you are looking for