A vendor is automatically selected after selecting aproduct category

Hello
In the shop transaction we are facing a problem in vendor selection. In describe requirement , we are selecting a product category and then a vendor is coming automatically.We are not to change or select any new vendor. Please suggest how to solve this problem.
Thanks
Manas
Edited by: Manas Behera on May 6, 2010 1:55 PM

Hi Manas
since you have unique contract for that product category it picked automaticallyu.
if you wanna STOP. create dummy Contract and include the product category. so that enduser can manually select or buyer can assign right contract to the sc item.
muthu

Similar Messages

Automatic drilldown after selection load in data view

Hello,
I work in a specific data view of a planning book. After loading a defined selection a drilldown is executed automatically.
I do not know how to avoid this - where can I stop this behaviour?
The drilldown is executed for every defined selection - so it must be stick together with settings in the data view or the planning book.
But I do not the point where to switch it off.
Can somebody help?
Kind regards
Heinz

Hi Heinz,
this could be due to user settings. Go to: settings --> maintain user settings (ctrl+F7). click on tab navigaion path (drill down). if you see any characteristics defined there, delete these characteristics. Update settings, save & exit.
come out of planning book and get in again. things should be good.
Hope this helps.
Regards,
Harshil Desai

In trying to edit a track - I want to "Delete and Move" the track to automatically fill the area that I deleted - However, after selecting a section to delete - the "Delete and Move" option is grayed out. How do I fix this?

In trying to edit a track - I want to "Delete and Move" the track to automatically fill the area that I deleted - However, after selecting a section to delete - the "Delete and Move" option is grayed out. How do I fix this?

Thank you for your attempt to help me. I appreciate that.
I think I figured out how to fix it-
I found that if I only delete a small amount at the beginning and at the end of the section that I want to remove - and then highlight that section - Then (and only then) does the "Delete and Move" function work to remove the unwanted section and automatically close the gap between the surrounding sections. I was trying to select a whole section and could only delete it - and then manually move it.
Problem solved.

Apple TV3 doesn't start automatically when i select airplay from my iMac and Ipad 3. i have to manually turn it on then it works fine after that! what is wrong with which setting.

Apple TV3 doesn't start automatically when I select airplay from my iMac (Yosemite) and Ipad 3( iOS 8.1.3) i have to manually turn it on then it works fine after that! what is wrong with which setting.

You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
https://discussions.apple.com/message/23957654#23957654
Peace
Harry

Error after selecting value from LOV - You are trying to access a page that is no longer active.

Created a simple page with a few text inputs and 4 LOV. After selecting a value from the last LOV the following error is displayed:
Error:
You are trying to access a page that is no longer active.
- The referring page may have come from a previous session. Please select Home to proceed.
OA Framework 12.1.3
Oracle OA Extension 10.1.3 - build 1313
Any pointers to the cause ?
Thanks

[57]:EVENT:[xx.oracle.apps.ap..webui.EngagementCO]:OAF LOG: Event : Call Process Form Data, in: xx.oracle.apps.ap..webui.EngagementCO: Entering Process Form Data
[57]:EVENT:[xx.oracle.apps.ap..webui.EngagementCO]:OAF LOG: Event : Call Process Form Data, in: xx.oracle.apps.ap..webui.EngagementCO: Entering Process Form Data
[57]:EVENT:[fnd.framework.webui.OAFormValueHelper]:OAF LOG: Event : Get Attribute Value, in: oracle.apps.fnd.framework.webui.OAFormValueHelper: View:xxEngagementVO1 ,Attribute:VendorId , Return Value without datatype conversion :996
[58]:EVENT:[fnd.framework.webui.OAFormValueHelper]:OAF LOG: Event : Get Attribute Value, in: oracle.apps.fnd.framework.webui.OAFormValueHelper: View:xxEngagementVO1 ,Attribute:VendorSiteId , Return Value without datatype conversion :60158
[58]:EVENT:[fnd.framework.webui.OAFormValueHelper]:OAF LOG: Event : Get Attribute Value, in: oracle.apps.fnd.framework.webui.OAFormValueHelper: View:xxEngagementVO1 ,Attribute:BusinessPrincipalId , Return Value without datatype conversion :48375
[59]:EVENT:[fnd.framework.webui.OAFormValueHelper]:OAF LOG: Event : Get Attribute Value, in: oracle.apps.fnd.framework.webui.OAFormValueHelper: View:xxEngagementVO1 ,Attribute:AttorneyPersonId , Return Value without datatype conversion :37430
[59]:EVENT:[fnd.framework.webui.OAMessageLovInputHelper]:OAF LOG: Event : Get Attribute Value, in: oracle.apps.fnd.framework.webui.OAMessageLovInputHelper: View:xxEngagementVO1 ,Attribute:Vendor , Return Value without datatype conversion :CLIFFORD CHANCE
fnd.framework.webui.OAMessageLovInputHelper][60]:EVENT:[fnd.framework.webui.OAMessageLovInputHelper]:OAF LOG: Event : Get Attribute Value, in: oracle.apps.fnd.framework.webui.OAMessageLovInputHelper: View:xxEngagementVO1 ,Attribute:AttorneyName , Return Value without datatype conversion :Bloggs, Mr. Joe
[60]:UNEXPECTED:[fnd.framework.webui.OAPageContextImpl]:MACCHECK: . Parameter failing validation is :MatterCode. Parameter "MatterCode" failed Validation. Value got from request object is 2435
Incoming URL is : /OA_HTML/OA.jsp?page=/xx/oracle/apps/ap/legal/webui/EngagementPG&_ti=752953423&language_code=US&&OAFMID=94470&OAPB=_OAFMID&oapc=16&oas=xSrFYCAbgOaPGVhqpb0-hA.. .
Current URL is : /OA_HTML/OA.jsp?page=/xx/oracle/apps/ap/legal/webui/EngagementPG&_ti=752953423&language_code=US&&OAFMID=94470&OAPB=_OAFMID&oapc=16&oas=xSrFYCAbgOaPGVhqpb0-hA.. .
Referer URL is : https://paydev.company.com/OA_HTML/RF.jsp?function_id=48080&resp_id=53189&resp_appl_id=20003&security_group_id=0&lang_code=US¶ms=CtXL5LFdg5E7c.aFPRw7fTZ5STWrUsz9iXF2ByXh3F4&oas=gAqepzP-un4kBOC8NUxtIQ.. .
HTTP Request Method is : POST
[62]:ERROR:[fnd.common.Message.auto_log]:FNDFND_FORM_POST_SECURITY_FAILEDYHOMEFND_GLOBAL_PRMPT_HOME
[62]:ERROR:[fnd.framework.OAException]:You are trying to access a page that is no longer active.
- The referring page may have come from a previous session. Please select Home to proceed.
Click on browser Back button and all LOV values are empty on original screen. Try and select value from LOV and after selection:
[23]:EVENT:[xx.oracle.apps.ap.legal.webui.EngagementCO]:OAF LOG: Event : Call Process Form Data, in: xx.oracle.apps.ap.legal.webui.EngagementCO: Entering Process Form Data
[23]:EVENT:[xx.oracle.apps.ap.legal.webui.EngagementCO]:OAF LOG: Event : Call Process Form Data, in: xx.oracle.apps.ap.legal.webui.EngagementCO: Entering Process Form Data
[23]:UNEXPECTED:[fnd.framework.webui.OAPageContextImpl]:MACCHECK: . Parameter failing validation is :VendorId. Parameter "VendorId" failed Validation. Value got from request object is 996
Incoming URL is : /OA_HTML/OA.jsp?page=/xx/oracle/apps/ap/legal/webui/EngagementPG&_ti=752953423&language_code=US&&OAFMID=94470&OAPB=_OAFMID&oapc=17&oas=lC4tbZwHYHffQY6uX7agiA.. .
Current URL is : /OA_HTML/OA.jsp?page=/xx/oracle/apps/ap/legal/webui/EngagementPG&_ti=752953423&language_code=US&&OAFMID=94470&OAPB=_OAFMID&oapc=17&oas=lC4tbZwHYHffQY6uX7agiA.. .
Referer URL is : https://paydev.company.com/OA_HTML/RF.jsp?function_id=48080&resp_id=53189&resp_appl_id=20003&security_group_id=0&lang_code=US¶ms=CtXL5LFdg5E7c.aFPRw7fTZ5STWrUsz9iXF2ByXh3F4&oas=gAqepzP-un4kBOC8NUxtIQ.. .
HTTP Request Method is : POST
[25]:ERROR:[fnd.common.Message.auto_log]:FNDFND_FORM_POST_SECURITY_FAILEDYHOMEFND_GLOBAL_PRMPT_HOME
[25]:ERROR:[fnd.framework.OAException]:You are trying to access a page that is no longer active.
- The referring page may have come from a previous session. Please select Home to proceed.

In AP invoice i need to make "Terms date " field to calculate the date automatically when i select the payment terms

In AP invoice i need to make "Terms date " field to calculate the date automatically when i select the payment terms.
How can i do this?

Hi,
You can select the Payment Term at PO Header Level.
When you book an invoice, that Payment Term will automatically defaulted to Invoice.
You can define Payment Term in AP.
Payment terms have one or more payment terms lines, each of which creates one scheduled payment. Each payment terms line and each corresponding scheduled payment has a due date or a discount date based on either a specific day of a month, such as the 15th of the month, or a number of days added to your terms date, such as 14 days after the terms date.
Payment Terms (Oracle Payables Help)

How to Put Date in a Textbox after Select

Hi, DWMX. How do i put todays date into a text box after
selecting an item from a ListBox. ie I want to change the staus in
the Listbox and have the StatusChangedOn Text box filled
automatically so it gets saved on submit.. I guess it's a bit of
java which i don;t know any of. I am using VBScript for the server
code. Thanks. Dave(UK)

Dave
If this is being a saved to a database simple set the default
value of the
database field to record the server time when the entry is
made. In Access
this is Date(), in msSQL it is getDate()
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"Dave(UK)" <[email protected]> wrote in
message
news:e5v91r$olj$[email protected]..
> Hi, DWMX. How do i put todays date into a text box after
selecting an
> item
> from a ListBox. ie I want to change the staus in the
Listbox and have the
> StatusChangedOn Text box filled automatically so it gets
saved on submit..
> I
> guess it's a bit of java which i don;t know any of. I am
using VBScript
> for
> the server code. Thanks. Dave(UK)
>

Rejection Code is Disabled After Selecting Status as "FINI"

Hello,
I have a document type "BUS2000116 - Service Process". In the status schema of this document, there are "OPEN", "INPR", "FINI" and "CANC". First, I select status "FINI" and i save the document. After this process, ERP billing is working and automatically an ERP billing document occurs and i can see it in the transaction history of Service Process document.
Then i want to reject all items. After selecting "More->Reject all items", a pop-up with rejection codes appear. I selected the one of the rejection code but after this, nothing happened on the document. The status of the document and status of the items didn't change and rejection code area in items is disable.
What do i have to do to reject all items of a service process document that has a status of "FINI"?
Thanks for all answers.

Hi Gobi,
This is more on the functional side as I have debugged the status management almost completely and in event callback function CRM_STATUS_BEFORE_REJECT_EC it is clearly stated that Reject is not allowed after Complete.
But in Help documentation it is mentioned that in CRM Service Billing in ERP functionality there is a possibility to cancel individual items and even there is a customizing step for this in ERP.
But as I said the system does not allow rejecting after completing.
Thanks though.
Emre

After selecting multiple values, immediately it will placed in Table contro

hello experts,
I m using select-option for multiple value selection.
I want:-after selecting multiple values, immediately it will placed in
Table control columns which is on same screen of select-option and that columns are grayed out.
I'm using this table control for input purpose.
I tried multiple value selection for input in table control but it is not possible.
Please Help.

There should be some user action to trigger the filling in of the table control with values from the select options.
Typically it is a click of Enter from the User s side. This would automatically trigger the PAI of the Module Pool program. So i feel the FM that is mentioned in the above post is not required to read the values because in the PAI , the value from the Select Options would have already flown from the Screen to the Program.
It is important that you use Subscreen for Select options and write your code in the PAI between loop endloop.
LOOP at Itab.
MODULE fill_itab.
Endloop.
I hope everyone agrees with me on this .
Regards,
Arun

EVENT FIRST COMMAND AFTER SELECT

Dear friends
I'm now using Gemalto Developer's Suite and I want to test this event. However, I try different ways but fail to accomplish my test.
Do you know any materials, or just anything about this event? I searched throughout various sources, materials but all I have now is a small piece of information in GSM 43.019
Upon reception of the first command received by the GSM application after it has been selected or after the ATR if it is the default application, and before the Status >Word of the processed command has been sent back by the GSM application, the toolkit framework shall trigger all the toolkit applets registered to this event.
If the first command received by the GSM application is a toolkit applet triggering command (e.g. TERMINAL PROFILE), the toolkit applets registered on the >EVENT_FIRST_COMMAND_AFTER_SELECT event shall be triggered first.
The ProactiveHandler and the ProactiveResponseHandler shall not be available at the invocation of the processToolkit method of the toolkit applet on the >EVENT_FIRST_COMMAND_AFTER_SELECT event.From this material, I think it's quite vague to understand clearly this event.
Thanks in advance,
Jason
Edited by: Jason Gosling on Oct 19, 2011 7:29 PM

hi Jason.
This is automatic event that was born by OS instead mobile.
When OS received the first command "00 A4 04 00 00 0xXX + AID APPLET GSM" from User, OS will look in the ToolkitApplet Registry table and find the applet with EVENT FIRST COMMAND AFTER SELECT, then OS call method "process toolkit" of this applet.
the called applet will do something that it want. Maybe send data to ME.
When method done, OS continue action normally.
This is for GSM applet on JavaCard. And the GSM applet is not default program.
For the case: GSM is default, that mean OS automatic select GSM APPLET when it starts, no need to any command form ME or User, OS auto create this event and look toolkitapplet to run processToolkit method.
hope this is fun !!

TS2518 My RAW (nikon .NEF) files changing to a dull, darker version of themselves after selecting them for the first time after import.

My RAW (nikon .NEF) files are literally changing to a dull, darker version of themselves after selecting them for the first time after import. I.e. The correct photo (light/color/etc) seems to be there and then a second later the photo changes. It's almost like it's showing a quick enhanced version then back to basic raw image. Started within last two updates.
Is there a fix or is this the straw that forces a switch to Lightroom?

Just recall that Aperture (or any other 3rd party raw converter) has NO information about the JPEG preview and how it was made. That information is camera-vendor proprietary.
Also note that there are like 6 "picture styles" in camera and this change you're seeing is entirely dependent on how you have them set. If you have your camera set to "vivid" or something you'll see more of a change than if your on-camera is set to "faithful."
That said, people here ALSO complain that Aperture's initial renders are TOO vivid, the exact opposite of your complaint, so you can't please everybody (in some cases, it seems you can't please ANYBODY ;-)
Aperture provides a starting point. Again, if you don't like it, you can tell Aperture to go with a "punchier" interpretation at its first render. In the import dialog, try setting Aperture to use the "auto enhance" preset which is built in. Aperture will add a little vibrancy adjustment, and it will add a curve, which will greatly add punch to the image. If you want adjustments in a different direction, you can create a preset and set it at import.
The only thing Aperture CANNOT do is what you're asking, which is "take the JPEG that my camera vendor generates through some voodoo and try and render the raw file just like that." It's, unfortunately, impossible to do.

Power View crash after selecting one bar

After the December update, 15.0.4675.1002, my power
view sheets crash (they disappear) after selecting one bar (or column) in a
graphic. 32 bits version in Spanish language.<o:p></o:p>
Any suggestion or workaround?
Best Regards.<o:p></o:p>

You may not be the only one Matt Allington at Excelerator reported about this in his
blog post (which seems to have been removed?!). You may be able to view a cached copy of his post
here. At the bottom of the post it says:
"Some users have reported that the O365 Update has broken previously working Power View reports. Given O365 updates are automatic, I guess this will need to be fixed with some priority."
Regards, Avi
www.powerpivotpro.com
Wiki:How to ask a Power Pivot Question to get a prompt, accurate and helpful response

How can I get a list view after selecting "see all"?

I just updated to iTunes 12. I've looked on the net for this but couldn't find anything on it.
Previously when I searched for something in the iTunes store I'd pick a certain category of media (podcasts, for example). It would give me the first few results and then I could select "see all." Then get a list view and sort it.
Now when I click on "see all" I get an album cover view. NOT a list view. And I have no way to sort the results. I usually sort by time.
What's odd is when I'm still on the initial page you get after making a search I *can* sort the results. But only the first 10.
Basically, I need a way to sort all of my search results by time. Either after selecting "see all" or having iTunes show many more than 10 results.
This was possible (and the default, I think) in previous versions. I've looked through every menu and I don't see a way to turn this functionality back on.
Thanks.

Hi,
There is no such PowerShell command can achiev this. Maybe you can use a script to get the user name with folder redirection enabled. However, I am not familiar with writing script, and it would be better for you to ask in script forum below for professional
assistance:
http://social.technet.microsoft.com/Forums/en-US/home?forum=ITCG&filter=alltypes&sort=lastpostdesc
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Data Error in the Query/Report after selective data deletion for infocube

Hi Experts,
Please advise what i was missing and what went wrong...
I got a Query (Forecast) on a Multicube...which is based on 2 Infocubes with Aggregates...
As i identified some data discrepency..yesteraday i performed selective data deleation on one of the Infocube
and executed report yesteraday and the results in the query are correct...
When today i executed the same report i am getting different results..
When i compared the results of the report with that of data in cube they are not matching
The report is not displaying the data in cube..for some rows it is displaying the data in the cube but for some rows it is just displaying same as the above row
there is no data loaded into info cube after selective deleation
Do i need to perform request compression and fill the aggregated after selective deleation
Please advise what went wrong

Hi Venkat,
No i haven't done anything on aggregates before or after selective delete
As there is not data load after the selective delete according to SAP Manual we don't need to perform any thing on aggregates...as selective data deletion on cube will delete data from aggregates as well
Please update how to identify error

After download and installation of PS PE12 I have problems starting the programm. After selecting video and new project nothing happens, only the colorbar below new project is showing

New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM

New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM

A vendor is automatically selected after selecting aproduct category

Similar Messages

Maybe you are looking for