A very new and strange warning message from my iPhone

I am getting a very new and strange warning message on my iPhone. The phone will repeatedly - even when sitting idle - flash a message that states, "This accessory not made to work with iPhone. Would you like to turn on Airplane Mode to reduce audio interference ... you will not be able to make or receive calls?"
This message started to flash up on my iPhone after I installed Leopard yesterday evening (11/15/07). I just updated my iTunes software today so I have iTunes 7.5 (19) and my iPhone software version is 1.1.2. Finally, I am not trying to hack my iPhone since I ain't smart enough to do so and, even if I were, I wouldn't want to have a dead phone on my hands.
Any suggestions or thoughts? Thanks.

Charles
I think my first instinct would be to try a Reset of the iPhone, if that doesn't improve things then try a Restore from within iTunes BUT.....
I would also wait awhile and see in anyone else weighs in with other suggestions first.
Good luck
FlatE

Similar Messages

How do I backup and view text messages from my iphone 4?

How do I backup and view text messages from my iphone 4? I want to know where and how to backup and view text messages and all other personal files, including voicemail, recent calls, etc. from my iphone. Is this function in iTunes and/or does iTunes already backup this stuff when I sync?
I really just want the answer to how and where this works.
Thanks

Apple provides functionality in the backup done via iTunes to backup the device and text messages. There is no functionality to view the text messages on the computer.
About iOS backups
Other programs are available which can extract text messages from the device or the iTunes created backup and then be viewed on the computer. To my knowledge, no program exists which can force backed up text messages into the device once they've been removed.
Google is your friend when looking for 3rd party software related to text messages.

I recently bought a neew ipad mini and have sync messages from my iphone. Which worked fine. I just picked it up and I have only to messages and can't figure out how to get back to the screen with the inbox and other folders?

I recently bought a mini IPAD and have sync messages from my iphone. Now I am stuck under group message and can't get back to the main screen that has the inbox and the various folders. Help???

youngkristen wrote:
So, our hope was we could just hook up the external to the mac and have it transfer seamlessly. Is there any hope of that?
Yes there is, scroll down to the bottom of the following Switch 101 article and click on the arrow next to Manually migrating.
Switch 101: Migrate your Windows files or system to your Mac

Pro Tools won't open and strange Warning message

I have been using Pro Tools 11.3 successfully for about a month. I just did an OS X update a week or so ago. I also did a Pro Tools update about a week ago (to 11.3.1). I went to open PT and the app opened, but my top menu never came up. It was just the normal Finder menu, but with my Pro Tools interface open where I could see all the tracks, etc. Clicking to desktop and back to PT several times did nothing.
I closed PT and did a Disk Utility "Repair Permissions". As the repair started up, the progress text gave me the warning below. I'm trying to figure out what it means. If it is a Mac thing or a Pro Tools issue. If someone can help me I would sincerely appreciate it.
<<<<<< Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.>>>>>>>>>>
The repair progress continues with this:
<<<<<<Group differs on “Library/Printers/InstalledPrinters.plist”; should be 80; group is 0.Permissions differ on “Library/Printers/InstalledPrinters.plist”; should be -rw-rw-rw- ; they are -rw-r--r-- .Repaired “Library/Printers/InstalledPrinters.plist”User differs on “private/var/db/displaypolicyd”; should be 0; user is 244.Group differs on “private/var/db/displaypolicyd”; should be 0; group is 244.Repaired “private/var/db/displaypolicyd”>>>>>>>>>>>>
I've never seen this message before and wonder it is part of the problem or signals what the problem is. I have downloaded a few free Pro Tools plugins. If anyone can help, I would sincerely appreciate it.
Thank you,
Leonard

Thanks apostol13,
You need to make SURE the Digidesign Core Audio Manager software, which Logic and iTunes use to "talk" to Digi hardware, is NOT running. if ti IS, turn it off.
Then PT will start up.
Cheers

TS2755 why can i only send and recieve text messages from other iPhones whith my new iPhone 5?

why can i only text between other iPhones whith my new iPhone 5?

Hello i need help! My text are only getting to iphone users and some other people without them but some non iphone users are not getting my text?

I have an iPhone and a new iPad. Both access the same iCloud account. The iPad new is new and all the photos from the iPhone have been backed up to the iCloud account. How can I download the pictures from iCloud on to the iPad?

Y

ALWAYS sync photos to a computer, don't count on icloud to store them for you. It does include photos from the camera roll in a backup, but that's all - and restores are not reliable when it comes to photos.
Added info...
Since you should always be syncing photos to your computer as you would photos from a camera, then sync from iphone to itunes/computer, then sync from itunes/computer to ipad.
http://support.apple.com/kb/HT4083
http://support.apple.com/kb/HT4236
http://support.apple.com/kb/HT4486
FOR A PC:
On a PC, simply drag photos to the designated Photo Stream Upload folder. By default, this folder is located atC:\Users\<user name>\Pictures\Photo Stream\Uploads. You can change this location by visiting Photo Stream Options in the iCloud Control Panel for Windows.

Strange warning messages of initiators change

Dear all:
I got a lot of strange warning messages from our SAN.
Do you think it is normal?
Thanks a lot!
DESCRIPTION:
Number of LUN(s) on 6120 sp0-array00 (ip=192.168.0.40) changed from 54 to 0
Agent : sp0
Severity : Warning
Category : StorEdge 6120
DeviceId : sp0-array00 (ip=192.168.0.40)
EventType: AlarmEvent.initiators
EventCode: 21.3.114
EventTime: 2006/06/02 07:17:50
DESCRIPTION:
removed 846 initiators from 6120 sp0-array00 (ip=192.168.0.40)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Agent : sp0
Severity : Warning
Category : StorEdge 6120
DeviceId : sp0-array00 (ip=192.168.0.40)
EventType: AlarmEvent.volCount
EventCode: 21.3.87
EventTime: 2006/06/02 07:25:36
DESCRIPTION:
Number of LUN(s) on 6120 sp0-array00 (ip=192.168.0.40) changed from 0 to 54
Agent : sp0
Severity : Warning
Category : StorEdge 6120
DeviceId : sp0-array00 (ip=192.168.0.40)
EventType: AlarmEvent.initiators
EventCode: 21.3.113
EventTime: 2006/06/02 07:25:36
DESCRIPTION:
Added 846 initiators from 6120 sp0-array00 (ip=192.168.0.40)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

These colors are based on standard BLAF standards used in oracle apps. You will have to use CLAF Customizing Look-and-Feel. Check OAF personalization guide.
--Shiv

Do you have an option for block all incoming message and request EXCEPTED messages from my contacts?

Please help!!To whom it may concernDear Madam/Sir who works for Skype & Microsoft Dear all who can really help, Do you have an option for block all incoming message and request EXCEPTED messages from my contacts? or Do you have any solution to solve my problem from begin to now in present time? Even though, I set the Privacy settings: - Allow calls from... "people in my Contact list only"- Automatically received video and share screens with "people in my Contact list only"- Allow IMs from "people in my Contact list only" I still received unknow users sent me messages in every day, contact requests etc. And they're all clearly spammings and identity thefts. I only wanna contact with my family and my freinds here with Skype via my Windows device and my mobile phone (w/Android OS). And this is the only way to contact with them, because they could use Skype only in overseas. BUT I don't need new friend from other unknow Skype member. I keep blocked all unknow spammers in every day. However in this morning, I feel so scared with Skype on my mobile, I looked at my mobile Skype, I saw it automatically showed me the list of all blocked members. BUT they were all unblocked (contact unblocked) by my mobile (Android version) Skype itself automatically, and listed them one by one on the screen, and about 30 seconds later, they all were disappeared suddenly. I don't know what do to now, is it indicating my account was hacked?And how could I found out all those members again and block them again and delete all of them for ever? I appreciate if you would improve the privacy protection. Thank you very very very much.

Hrm... that may be true and this may be a function of the phone email client that Apple just doesn't do.
No, I can easily MANUALLY delete the messages. I would prefer if I didn't have to do it twice, tho. Once on the mail server and once on the phone.
What I think the phone needs to do is, when it checks the POP, anything NOT there should be removed locally. I think you are correct on POP; the phone will poll the mx (mail exchanger) and the mx will pass off the messages to the phone. The phone then keeps ALL of that unitl you manually delete it.
If, say, I remove a message from the mx, I would like the phone, when next polls, to see that that particular message isn't on the server anymore and remove it locally.
Perhaps it's just me but if I delete the message on the mx itself, via my ISP's webmail interface, I really don't want to have to remove it again from my phone.
thxs!
cheers
rOot

Tcode DSWP, Determining warning messages from CCMS

We use SAP Solution Manager 4.0, SPS 13 for System Monitoring of almost 100 systems.
We configured SOLMAN as CEN system and activated the CCMSPING with push option.
For almost the 2/3 of the systems we configured SAPCCM4X agents.
Our current problem is a performance issue in tcode DSWP. When we try to enter into one of the solutions there (by pressing on it) we get the following warning:
Determining warning messages from CCMS
It tooks a while and then it is possible to access the desired solution.
My important question is of course:
How can this issue be solved?
Is there some techniques to analyse and change the problem
How can I check whether all the agents work in push mode and that we do not use standard CCMS methods that can cause the RFC load?
Thank you very much for any helpful information
Regards
Thom

Hi Thom,
Have you already installed CCMS agents, the will speed up communication? That's definitely required in your situation with many systems connected to SolMan.
See [http://service.sap.com/monitoring|http://service.sap.com/monitoring]
You can also check CPU, Memory, as recommended by Afi, but I expect that this will not be the bottleneck.
Response times depend on the number of connect systems, number of activated monitoring objects (MTE nodes), number of server, instances.
If you are not satisfied with performance, I would recommend to open a customer message on component SV-SMG-OP or SV-SMG-MON-SYS.
Best regards,
Ruediger

Hyperlink warning message from HLINK.dll

Hi,
I have a access file (Created in Win Xp and Access 2000) which has forms. I have a hyperlink in one of the forms which opens a word file and merges data with the word doc.
Now I am supposed to make it work in Win 7 and Office 2010.
When I click on the link, it opens the file once and completes the procedure. As soon as this is done, I get warning message from HLINK.dll as "some files may contain viruses....etc". When I click OK, it open same file again does same processing. So
same file is generated twice.
I believe that if the warning message is suppressed, it wont generate second file. Please help me to suppress the warning message.
And if you feel there is some other solution to this, please suggest.
TIA
Regards,
Naresh

Hi
Naresh,
You may disable warning messages hyperlink in Office 2010 by the steps below:
===========
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious
problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.
1.
Click
Start, and then click Run.
2.
In the
Open dialog box, type regedit, and then click
OK.
3.
In Registry Editor, locate one of the following registry subkeys:
o
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Common
o
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Common
NoteYou only have to modify one of these registry
subkeys. You do not have to modify both of them.
Note If the Security subkey already exists, skip to Step 6 after selecting the Security subkey.
4.
Click the registry subkey, point to
New on the Edit menu, and then click Key.
5.
Type Security, and then press ENTER to name the key.
6.
On the
Edit menu, point to New, and then click
DWORD Value.
7.
Type DisableHyperlinkWarning, and then press ENTER to name the entry.
8.
In the right pane, right-click
DisableHyperlinkWarning, and then click Modify.
9.
In the
Edit DWORD Value dialog box, click Decimal, and then type 1 under
Value data.
Note A value of 0 enables the hyperlink warning message. A value of 1 disables the hyperlink warning message.
10.
Click
OK.
11.
Exit Registry Editor.
For details, refer to the KB articles:
http://support.microsoft.com/kb/829072
http://support.microsoft.com/kb/925757
Best Regards,
Sally Tang

CCMS: Determining warning messages from CCMS

Hi!
We use SAP Solution Manager 4.0, SPS 13 for System Monitoring of almost 100 systems.
We configured SOLMAN as CEN system and activated the CCMSPING with push option.
For almost the 2/3 of the systems we configured SAPCCM4X agents.
Our current problem is a performance issue in tcode DSWP. When we try to enter into one of the solutions there (by pressing on it) we get the following warning:
Determining warning messages from CCMS
It tooks a while and then it is possible to enter into the solution.
My important question is of course:
How can this issue be solved?
Is there some techniques to analyse and change the problem
As I know there are two ways of sending/retrieving the data:
via RFC (pull)
via CCMS (push)
Which method is faster?
Is there some changes in CCMSPING possible? (interval for sending/retrieving the data)?
Is there some other settings (likw profile parameters e.g. rdisp/...) that could be performed to solve the problem?
Thank you very much for any helpful information
Regards
Thom

Hi Thom,
The CCMSPING agent uses two methods to check availability. One is to connect to the message server using "Ping monitoring" the other method is to check whether you can actually login on the application server and that requires an RFC connection. When you configure Availability monitoring you will see you can configure either or both methods depending on what your requirements are.
The data is collected and stored in a memory segment reserved for monitoring. The agent connects to this segment on your monitored systems and transfers it to your CEN at the set intervals where it is cached. Edit: sorry if confusing, this method used by sappccm4x agent. CCMSPING connects directly to your application server message service to check availability.
You keep asking which is faster but as mentioned you may require both methods depending on your requirements.
Factors like how busy your application servers are(RFC calls require free dialog work processes) and how long the agent should wait before receiving a response will effect the performance which is why you are able to adjust ping timeout and frequency. How many systems are being monitored and how much data is being transfered from those systems is another factor to consider.
Regards,
Nelis
Edited by: Nelis Lamprecht on May 15, 2008 3:11 PM

How do I get my old text messages from my iPhone to my new Galaxy?

Recently, I just upgraded from an iPhone 4 to a Samsung Galaxy 4. I upgraded my account from Sprint and got my new phone at Best Buy. I'm trying to get into my iTunes because I know I recently synched my iPhone on my iTunes a little over a week ago. What I'm trying to do is get into my iTunes because I know my iCloud is backed up on iTunes. I got all of my contacts and pictures already transferred from my iPhone to my Galaxy. Now, that last thing I'm really worried about is my old text messages. There is this old text message that I'm needing to save, but I can't seem to figure out how to get my old text messages to my new phone.
Is there some way I can get those back or what I need to go to Geek Squad to help me with this?

Apple has not designed the iPhone for loading up old messages across phone platforms.
Screenshot the important stuff on the Android or use a tool to archive the old SMS on your computer.

Is there a way to recover deleted mail from my iPad and recover deleted messages from my onw iPhone?

Is there a way to recover deleted mails sent from iPad and/or recover deleted messages from my iPhone?
A software or even open it? It is very important for me get back the messages sent on December. I did not have a back up at that time, at least that I know, but I change my iPhone and had as I got a micro chip, I could take my contacts from iTunes.
Does it means a back up was done at the Note book I used that time or the messages are lost?
And my mails? From my server, I can recover only from 5 last days!
Thank you for any help!!

Thanks for replying - no, I had not done a backup since the shots were taken and then attemped to put them in an album as I did not want to change the enviornment of the phone from when I had inadvertently delted them. Unfortunatlely, when asked "Do you want to delete these photos from all locations," I hit yes and they were also deleted from my Photostream.

I need to retrieve a series of very old (more than 1 year old) text messages from my iPhone 4S. Is this possible?

I need to retrieve a series of very old (more than 1 year old) text messages from my iPhone 4S. Is this possible?

If the text is still on the phone and wasn't deleted, I don't see why not. Probably easiest to use an app like TouchCopy (Mac and PC) or PhoneView (Mac), rather than looking through things on the phone itself.

Im having trouble sending messages from my iPhone 4..ever since i upgraded to iOS 5, its giving me this problem. It says your SMS mailbox is full. Delete some messages to recieve new messages. I've deleted around 10 huge conversations, rebooted it, resto

Im having trouble sending messages from my iPhone 4..ever since i upgraded to iOS 5, its giving me this problem. It says your SMS mailbox is full. Delete some messages to recieve new messages.
I've deleted around 10 huge conversations, rebooted it, restored it, done a soft and hard reset too. What should i do?

my boyfriend restored his iphone as a brand new phone and still had this problem, he deleted all his text conversations except mine and his best friend's conversations still nothing, i told him to delete OUR conversation since its a 2 year conversation that he has NEVER deleted ..... he said YES!! we tried to delete it and the phone freezes as soon as we click on the CLEAR CONVERSATION button!!!! we tried about 5 times and this happened everytime we tried!!!! ....is like the phone doesnt wanna let go of our conversation!!! every other conversation he deleted the phone was fine except for when we try and delete ours!!
so yesterday he left his phone alone around 4 pm since we have the apple appointment today at 130pm.......around 11 pm last night his phone went NUTS receiving all the text messages i had sent and never received!!!! and now the phone works just fine!!! ...... CONFUSED?????? yeah we are too!!!
but we're still going to the apple store to see what they can tell us!!!

A very new and strange warning message from my iPhone

Similar Messages

Maybe you are looking for