A very strange thing happening with Nokia Map Load...

I am trying to load new maps onto my x6.
When I click on Nokia Map Loader it tells me that another instance of the programme is running and that I need to close that one down first.
But this is not the case. I have no other programmes running.
It mentioned that I might have the maps updater programme running. Again that wasn't true.
I uninstalled both and started again.
Same problem.
I try launching map loader through pc suite. Same thing.
I am really flummoxed and I hope someone can help.
Thank you.

Did you set up "hot corners" for Expose?
I bet you have the up/left corner set for "Application Windows" then when you move over and have no apps open you get the warning noise. When you move slowly you just don't hit the corner to triger expose
D:

Similar Messages

Very strange thing happening

I developed a spreadsheet today and had a very strange thing happen while I was working in Numbers.
Every minute or so Stuffit Expander would open and expand a file and place it on my computer. It started out as a quick flash on the screen and would be gone in an instant. I saw that it was being made by Stuffit so I opened up Stuffit and went into Prefs and told Stuffit to ask before expanding the file. This, then, stopped the process so I could see what was going on.
A folder was make called "[file name].numbersFolder"
Inside the folder are two files called: "buildVersionHistory.plist" and "index.xml". Along with these files is a "QuickLook" folder that has a thumbnail of the spreadsheet I am working on inside.
The xml file is large and has several URL's embedded including the Apple developer site (http://developer.apple.com/namespaces/sfa).
Can anyone tell me what is going on here.
Looks fishy to me!

If I recall, this is StuffIt expanding what it thinks is a ZIP file. It is correct, in a way, but you don't want it to do that. I do not have StuffIt so I do not know what settings it has. Hopefully it has one along the lines of "automatically unzip zip files" and you can turn it off.

Strange things happening with fonts?!?

Some strange things are happening with fonts. The following
picture shows part of the problem. This is only occuring with IE 6.
It doesn't happen in IE 7 or the current firefox. The information
in the silver and white box is the problem. This is being pulled
via spry and being displayed via a div tag. It shouldn't be bold
faced. No code is telling it to bold face, yet it is.
http://i211.photobucket.com/albums/bb305/silentbobsecret/fontissue.jpg

Are you using a fade effect on it? If so, that's an IE bug,
which has several workarounds which include setting the background
color on whatever it is your are fading, or making sure that after
the effect is done (via a finish function) making sure to remove
any opacity related style on the element you just faded in.
This sample also had that problem:
http://labs.adobe.com/technologies/spry/samples/data_region/DetailRegionEffectsSample.html
but we used the background color trick.
--== Kin ==--

Strange thing happen with my password

Dear all,
I just installed Leopard on a new machine (unfortunatly after I did some work, and I hope all is not going to be lost). Once the Leopard installed,I did a restart. Comes to the point when I need to insert a password. I am pretty certain that I put the correct one, as when I dont, the screen does a shaky thing to show that it is the un correct. When I put my password, the Mac seems that it accepts it, the screen change into plain blu for couple of second, just as it was going to take me to the desk, but then comes back into the password question again. NB. It is my very first trial into Leopard, am I missing something ? And if no luck, am I going to lose it all with a reset as explained in this forum ? Thanks for your support,
Nicolas

Nicolas, if you would have checked the yellow alert box at the top of the Leopard discussions you would have eventually come to this article about your problem.

Strange thing happens with JTable & JFormattedTextField

hello,
again a problem,
in my Jtable i have different JFormattedTextField with a mask for a datefield, everything works fine, for that i made a formatteddateeditor which holds a JFormattedTextField an a renderer which extends a JFormattedTextField and implements the tablecellrenderer.
Now here 's my problem, sometimes when i click on so a field, the mask (__/__/___) dispappears and i got a blank field with the cursor blinking,does anaybody knwo how to do solve this thing ???
THX
Tom

Sounds like that field is editable. The renderer renders the display when a field is not
being edited, a TableCellEditor is in charge when the field is edited, and the default
editor is just a JTextField.
: jay

Something very strange is happening with the adjustment brush

When I brush over an area of a photo with the adjustment brush, LR does not select all of the area I brushed over, regardless how many times I go over it. The unselected spots look like pepper sprinkled on mashed potatoes, small dots that will not select, and so will not do whatever effect I'm trying to do. Like if I brush a hillside, the little dots will appear (apparently randomly) If I change the color temp the selected area changes like it should but the little specks do not change. LR will not select them. Please help.

Sorry, not the right answer. But thankx for taking a shot. According to
Adobe LR does not have enough pixels when I'm working on a macro subject
(say a butterfly that I'm trying to work on at 2x in the navigator) there
just are not enough pixels. So I have to transfer projects that deal with
micro subject into PS, PS had no problem detecting the holed and filling
them in, what I've got to do is select using the magic pen or whatever
works best and then make adjustments to the selection. We do that, no
problem. Then back to LR for larger more general adjustments. I have no
idea why, WHY Adobe would have two programs that work so closely together
and yet not have identical selection abilities. That's a mistake in my book.
On Sun, Oct 12, 2014 at 11:13 PM, Bob Somrak <[email protected]>

Apex working ...but very strange thing happening

hi,
My forms is working ok in apex. I am able to click button and generate new id and save the record,i can see the new id in the table in the db .But the problem is when i checked the same record using oracle forms 6i ,i was able to search the record but in the details block its showing null.
The existing forms are working ok for all the records,but when i use the apex form to generate id then its showing null details for that records.
Please advise.
Thanks
Hsac

hope you are generating id through sequence. is the sequence created by you or if you are using sys_guid and if sys_guid sequence you would have used to_char and under format 'xxxxx.....xxx' would have been used. It is strange if i give less than 32 'X's, i am also facing your problem in apex itself too.

A strange thing happened with my 2nd generation nano today.

When I press the selection button to start playing a song, the nano instead starts playing the song that comes after the song I selected. I tried resetting it, but it didn't solve the problem. Has anyone else had this problem, and more importantly, does anyone know how to fix it?

Have you had a chance to look at these troubleshooting pages? They may be of some help:
Troubleshooting songs that skip on iPod
iPod: Troubleshooting songs and audiobooks that won't play
As a last resort try restoring your iPod. Just be aware that restoring will erase the iPod's hard drive, reload the software and put it back to default settings, so if you have songs on your iPod that aren't on iTunes you will lose them if you have no back up. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation. If you want to update manually or using selected playlists choose no and it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

Strange thing happening with iPhone 5??????

Just started yesterday. When getting a phone call after I end the call my music player begins playing without me selecting it to play. Anyone have this wierd issue?

IE 'The page cannot be displayed' message.Use a useful browser which displays the error message as it was sent by the server. This page is an annoyance because it hides the actual error message and,as far as I know, you can't turn this feature off.
Also have a look at your log files and check them for exceptions.
andi

Strange thing happened with the screen

I've had my Mac Pro for more almost 18 months.
Today I was in a site and I leave my desk for a moment, when I return the screen was distorted, the colors, like when you zoom in a pic and you see the pixels.... I press the button and it restarted normally.
My question is, do you think this is a virus or something like that? I recently download some templates for my blog.
Any advice?

Welcome to Apple Discussions!
Check and see if you might have the NVIDIA chip issue:
http://support.apple.com/kb/TS2377
Another possibility is that the Zoom may have accidentally been turned on. (System Preferences>Universal Access>Seeing.)
If it is the NVIDIA problem, Apple should repair it at no cost to you.
Good luck!

Nokia Map Loader Error in connection

Hi Guys,
I have an N80 and have the MAPS software installed on my phone and the Nokia Map Loader software on my Laptop. However, in order for me to download the maps I have to connect my N80 to my laptop in Data Transfer Mode and then run Nokia Map Loader. This should then allow me to download the Maps. I get an error when connecting to my laptop in Data Transfer Mode. It just says Invalid usb connection or something like that. No I don't think it is the maps software but I would like to know if any of you had the same problem before and how it can be resolved. I sent a note to Nokia Tech team to see if they know but it takes a while for them to get back to you.
So, does anybody know how I can get past this or get the MAPS downloaded?
Any advice would be greatly appreciated.
Cheers

can´t connect nokia map loader, error, won´t work?
I had this same problem, found your post looking for an answer (lol), and I just SOLVED the problem ; )
First, you don´t connect in data transfer mode. You must use pc suite mode, or it won´t work.
Second, (and this is the tricky part), YOU HAVE TO INSTALL nokia maps on your smartphone (so far ok, we all know this), but then you have to RUN THE PROGRAM ONCE.
Don´t ask me why, but if you just install nokia maps, then try to connect with nokia map loader, it won´t work. You have to install the program then run it once. Exit the program, then connect to you pc (nokia map loader) with pc suite mode.
BTW, do NOT install nokia maps on your smartphone on the phone memory. ALWAYS USE THE CARD MEMORY, install nokia maps on your memory card, because the maps are so huge. Most phones won´t have enough internal space.
So this is it, no more suffering. Damn, I´m good ; )
Message Edited by unsterblich on 17-Jan-2009 03:54 PM

Interesting facts about Nokia Map Loader 1.3 and 1...

Hi there, I have done some interesting tests yesterday after upgrading the Map Loader to version 1.3. First, I tried to connect my N95-1 (v.20.0.015) with a microSD card (4 GB) to my PC with Nokia Map Loader 1.3 running. The software asks to update to 1.2.1, then it tells my Map data is incompatible. Nothing new with this. Well I went to my wifes PC (with Map Loader v. 1.2.1. running) and found out the older version too claims that map data is incompatible! Well, then I changed another microSD card (2 GB) into my N95, formatted it, opened the Maps software. Now the Map loader did work OK. I could download maps and voices. I then changed my original microSD card (4 GB) back, and then deleted (with winXP resource manager) the folders "cities" and hidden "private" completely. After this the Map Loader (1.2.1) did work all right with this 4 GB microSD card. I downloaded the maps and voices I needed and now the N95 works fine. I haven´t, though, tried this with the version 1.3 yet. But you will find the version 1.2.1 from this Smart2go site: http://www.smart2go.com/en/help/maploader harrykaa

OK now, I have some more info on this topic now.
Firstly after having tried to open MapLoader 1.3 and getting the "uncompatible" message, you do not have to format the SD card.
Only delete the hidden "private" folder and the folder "cities". Then you go and delete the qf file from the root directory of the SD card too.
What is new is that I did this 3 days ago and then downloaded the maps with older MapLoader (1.2.1).
Now, yesterday I deleted folders and qf file again and found out that the new MapLoader (1.3) works too.
It even asks to update the maps before opening.
I did download the maps of the Europe with both versions 1.2.1 and 1.3.
But it was interesting to find out that Europe maps downloaded with 1.2.1 were 1,525 MB, but the maps downloaded with 1.3 were over 1,600 MB. So with new version you get more recent maps.
harrykaa

I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. Help!

I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. In one case, a message someone had sent to me wound up in the mailbox of a third person, who was not included in the address list!! I have only two accounts, and have checked everything; only one account is showing the repeats Now, that account is my professional account, and it resides in three places: I use it on the laptop described here, I use it through Apple Mail on the much newer desktop Mac in my office, and I can run it through Web mail on my employer's server, which is where the professional account resides (I have a mailbox there, etc.) That program is called Zimbra.
My personal account is with Earthlink and is not doing the repeats. I access it either through my MacBook's Apple Mail or the Web; the Apple Mail on my office Mac is not configured to access the Earthlink server.
What IS going on here?? My friends, colleagues, and students (I teach college) are mystified by these ancient messages.
Thanks for any help!!

I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. In one case, a message someone had sent to me wound up in the mailbox of a third person, who was not included in the address list!! I have only two accounts, and have checked everything; only one account is showing the repeats Now, that account is my professional account, and it resides in three places: I use it on the laptop described here, I use it through Apple Mail on the much newer desktop Mac in my office, and I can run it through Web mail on my employer's server, which is where the professional account resides (I have a mailbox there, etc.) That program is called Zimbra.
My personal account is with Earthlink and is not doing the repeats. I access it either through my MacBook's Apple Mail or the Web; the Apple Mail on my office Mac is not configured to access the Earthlink server.
What IS going on here?? My friends, colleagues, and students (I teach college) are mystified by these ancient messages.
Thanks for any help!!

I traded my iphone in and now have a new one (iPhone 5) with the same SIM. Since, I have had some iMessages meant for someone else and some strange things happening on my phone (applications opening by themselves, calls disappearing from log). Any ideas?

I traded my iphone in and now have a new one (iPhone 5) with the same SIM. Since, I have had some iMessages meant for someone else and some strange things happening on my phone (applications opening by themselves, calls disappearing from log). Any ideas?

The answer is very simple: You were not the original owner of the phone. Target sold you a phone that had been returned. You can verify the date of the original sale here: Apple - Support - Check Your Service and Support Coverage. I suspect you will find that the warranty expiration date is not one year from the date that you bought it.

A very strange thing . . .

Hi all,
A very strange thing just happened. One track in a project, which has several regions, just stopped playing back! All other tracks play fine. Even the track that stopped playing back, when selected, is still active, i. e., my midi controller still plays the software instrument associated with the track. All of the info is still there; I can see it all in the piano roll, the score . . . everything.
One clue, which I'm not sure how to describe, is that in the problem track, all of the regions have changed color and now have a little dot in their upper left corner. So, the regions which were all green, the default color, are now gray and green, but have the little dot at the top left.
Oh, this happened by accident while I was recording on that track. I was attempting to record a new region between two other regions, then suddenly this happened!!
Anybody know what's going on here?
Thanks, Joseph

thanks for the gray tracks thing. I have worked with Performer since 1985. I am having the hardest time simply getting around on logic express. Copying, pasting, setting regions. I record and sometimes it doesn't erase the previous info. I paste a track and it goes to another track. How do I erase measures on one track? Sorry for the lack of clarity in this question but the manual has been hard to understand. COuld I call you? I know the answers are easy. I don't see the logic in logic. Any help would be appreciated. [email protected]
fritzkersting.com

A very strange thing happening with Nokia Map Load...

Similar Messages

Maybe you are looking for