A Very, Very Simple Question..... Can't Find an Answer Anywhere.........

In the built-in Photos App, i'd like to show my photos in a particular sequence, in other words, i'd like to control the order of photos in any folder....... i can't seem to sort them, not in the ipad, nor in itunes on my home mac. i have tried numbering them, i can't seem to get any kind of control.
i'd like to show portfolios of work, in a particular sequence in each set.
any ideas???
TIA!
-Josef

i have tried numbering them, i can't seem to get any kind of control.
An interesting question. Mine seem to be in the same order as my photo managing application -- Aperture. In my case, I have left them in their default order (alpha-numeric names assigned automatically by their time stamp). Since you say changing the name does not work, you might try altering their physic order in the managing program or, if that doesn't work, try changing the time/date info as either may be used as the basis for their order for iTunes syncing of the iPad. Unfortunately, the iPad does not always seem to update its data base when changes are made. (E.g., multiple iBooks cover changes made in iTunes don't seem to be updated after the initial change.) Therefore, even if changing the name, date, or physical order does re-write the info as far as iTunes is concerned, it may not be reflected on the iPad. (I.e., you may have to run your tests on albums being sync'd to the iPad for the first time.)

Similar Messages

Simple question but can't find an answer anywhere

This must surely be a very easy question for someone to
answer (although I can't find an answer from any tutorial or
forums, despite lots and lots of Google searching).
I want to create a link from one SWF file to another (when
these two files are 'stand alonE', not online). How do I it?
I've managed to use Actionscript to create links to a website
and another scene within the same SWF, so I'm surprised that this
is proving so much more difficult.
The script I have that's not working is:
lesson1_btn.onRelease = function (){
gotoAndStop("lessons.swf");
(BY THE WAY Before you recommend I put everything online,
this is for coursework and it specifies that the whole thing must
be stand-alone.)
Could the problem be with my Flash Player or the way I'm
vieiwng the SWF? It doesn't work in test mode but neither does it
work when I open the SWF directly from it's location.

I'm not sure what you're doing with the
gotoAndStop("lessons.swf"); command - whether lessons.swf is
a scene or a frame label. If its a scene, then I think you need a
frame number as well. (actually I don't know - I don't use this
function)
But you
might want to take a look at the comments at the bottom of
this page, I think - not sure if its relevant, but it seems like it
could be :
http://livedocs.adobe.com/flash/8/main/00001733.html#135769

HT204389 Is Siri available for 4th generation Ipod's? I can't find the answer anywhere. (Please no mean comments either)

I can't find the answer to my question anywhere and I just simply want to find out. Please, because it is the Christmas season, PLEASE do not leave me negative comments. I'm only wanting to find out for sure if I can get Siri on my 4th generation Ipod touch. Thank You!

http://www.apple.com/ios/siri/
*Siri is available in Beta only on iPhone 4S, iPhone 5, iPad (3rd generation), and iPod touch (5th generation) and requires Internet access. Siri may not be available in all languages or in all areas, and features may vary by area. Cellular data charges may apply.

Custom report layout question...can't find any answers anywhere

I am trying to build a report in Portal, using the custom report layout. The report displays like so, before I do any customization:
COLUMN1 COLUMN2 COLUMN3
COLUMN1 COLUMN2 COLUMN3
COLUMN1 COLUMN2 COLUMN3
COLUMN1 COLUMN2 COLUMN3
where COLUMN1 is the same value, always per report; COLUMN2 and COLUMN3 vary.
What I want is:
COLUMN1
COLUMN2 COLUMN3
COLUMN2 COLUMN3
COLUMN2 COLUMN3
COLUMN2 COLUMN3
In the report layout editor, Body section, this is what I see:
<TD ALIGN="LEFT"><#COLUMN1.FIELD#></TD>
<TD ALIGN="LEFT"><#COLUMN2.FIELD#></TD>
<TD ALIGN="LEFT"><#COLUMN3.FIELD#></TD>
so #COLUMN1.FIELD# must be some kind of array, but I am not finding any documentation anywhere on how to reference the individual values. All I need is the very first value of the COLUMN1 variable. Once I have that value, I can put it where I need it, but I can't get at that value, just the array.
I have searched portal center, the app server documentation, html documentation. I have googled everything I could think of, but came up with nothing. I found a similar question on this forum, but no one responded with an answer. Any help would be greatly appreciated.

Helen,
The best way for your case is to use a content folder and customize it whichever way you like.
however, your question is about reports. the problem in reports is this that you have to use just one single query and the layout of the results of this query are displayed in a peculiar way.
anyway. something similar but not exactly the same as what you wanted do is the following.
use a query like the following: (with a union in between)
SELECT COLUMN1,NULL , NULL ,NULL ,NULL
FROM my_source_table
WHERE myCriteria LIKE 'SoAndSo%'
UNION
SELECT NULL,COLUMN2 , COLUMN3, COLUMN4, COLUMN5
FROM my_source_table
WHERE myCriteria LIKE 'SoAndSo%'
---------- Now, have the following codes in the layout segments:

<table border="0" cellpadding="1" cellspacing="1" width="20%" align="center">

<tr align="center">
<td><table border="0" cellpadding="1" cellspacing="0" width="30%" align="center">
<tr align="center">
<TH><#COLUMN1.FIELD#></TH>
</tr>
</table>
</td>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN2.FIELD#></TD>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN3.FIELD#></TD>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN4.FIELD#></TD>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN5.FIELD#></TD>
</tr>

<TR><TD></TD></TR>
this should produce a report with a table structure (you may see the whole if you give BORDER="1" in the main table tag). Within this table, the first column of the first row should be showing top-leftmost column value once (COLUMN1 value) and then the next rows would show last four column values as a table block on the right-bottom part.
with kind regards,
naqvi

I have (5) eMacs, (2) 1GHz, (1) 1.25GHz, and (2) 1.42GHz, running, 10.4.11, can I purchase, just one Leopard upgrade to service, all of my computers? I really appreciate your, assistance, in this, I can't find the answer, anywhere. Thanks.

I, have (5) eMacs, (2) 1 GHz, (1) 1.25GHz, and, (2) 1.42 GHz, Will, I be, able to purchase, A, single copy of, Leopard, to upgrade all my eMacs? I've, tried, to, find, the, answer, to, this, on my own, but to no avail. Any assistance, on this, would be appreciated. Thanks, in advance!

Your biggest problem will be finding a retail copy of the Leopard install DVD. Finding a Family Pack will be even harder.
Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
The DVD should look like this
Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
 Cheers, Tom

HT4623 When does my score show an increase I can't find the answer anywhere!

When does bejeweled diamonds show an increase in my score I can't find any reference to this?

Try contacting the developer of the app

Very simple question - but cant find anything to do this! (other than a full proxy server)

Simple one for everyone who has kids... I run a wrt54gs, v1.50.9 wireless network in my house. I have 2 teenage kids both with laptops...
I'd like to be able to see what sites they're browsing (ie firewall logs) - but without installing something like 'netnanny ' on each laptop (there apears to be a log setup on the router but doesnt record anything let alone outgoing traffic)
I know I can bar sites through the setup...but does anyone know of any app that will record from the router, who's looked at what site?,,,so I know (quietly!) what they're looking at?
Cheers.

Why not ask in the Flash or Actionscript forum; this is the Flash Player forum.

Very Strange error and can't find any answer anywhere in the net

I created a login form (see below).
If I use the regular HTML form and form fields for the username, password and submit button I don't get any problem viewing my form
But if I use cfform and cfinput form fields I get this error.
Here is my cfform codes:
cfform name="login" action="/login/checkLogin.cfm" method="post">
cfinput type="text" name="username" size="25" required="Yes" message="Please enter your username">
cfinput type="password" name="password" size="25" required="Yes" message="Please enter you password">
   cfinput type="submit" value="Sign In">
/cfform>
When I launch this page I get this error and I don't understand what this means and what am I supposed to do, please help!
Total Time Avg Time Count Template
1 ms 1 ms 1 /opt/coldfusion10/cfusion/wwwroot/CFIDE/administrator/templates/secure_profile_error.cfm
0 ms 0 ms 1 top level /home/space/users/www/webdocsec/login/login.cfm
19 ms   STARTUP, PARSING, COMPILING, LOADING, & SHUTDOWN
20 ms   TOTAL EXECUTION TIME
red = over 250 ms average execution time
Exceptions
10:08:08.008 - Template Exception - in : line -1
     Attribute validation error for tag CFINPUT.

Using cfform
To start with, leave cfform aside. You will find in the documentation that most developers are abandoning Coldfusion's native UI tags, for example, cfform, cfgrid, and so on. They are outdated and occasionally perform erratically. If you wish to validate forms, use a Javascript library such as jQuery.
Implementing Site-Wide Error Handler
By default, there is no site-wide error handler configured. It is advisable to create your own. Then register the path of the page in the Coldfusion Administrator.
As the name implies, it is a CFM page which ColdFusion runs when it encounters an error on your site. Creating your own enables you to present a simple, customized, user-friendly page to your visitors.
Alternatively, you may choose to implement a Secure Profile. This is available in the Administrator, on the page Security => Secure Profile.
When you check the box, you configure Coldfusion to automatically implement all the security measures listed in the table. That includes Coldfusion's own the Site-Wide Error Handler. It is the system file, /CFIDE/administrator/templates/secure_profile_error.cfm.

Quick Backup Question - Can't Find the Answer

I need to restore my phone with an old backup to get some (read 300+) photos of my newborn that were lost.
I tried restoring the phone, but the only backup in the drop down was from a sync that caused the problem in the first place.
I was able to find a backup folder under library in the finder that I think could fix the problem, but I can't seem to figure out how to actually use that backup file.
What is my next step to backup my phone with that old file, hopefully restoring the lost photos, and returning my wife from the abyss she currently resides in?

As I posted in your other thread, only one backup is kept (usually, unless you manually archive them).
A 'backup' consists of a folder with a UID (a long, seemingly meaningless name), stored in ~/Library/Application Support/MobileSync/Backup. How many folders do you have in there? If there is more than one (and you only have one iPhone/iPod Touch), then you have 'extra' backups. Check the date modified for the folder to determine the date of the backup.
Within the backup folder are some .plist files and many .mdbackup files. It is possible to extract files from the backup, for skilled users. However, if the modified date/time of the folder is the date/time of the last sync, the pics are gone because they were overwritten.
FYI, the process to recover data from the backup involves running a python script from the terminal, then parsing the resulting SQLite database. If those concepts have meaning for you, then you might be able to at least have a look at the backup. But, I really think those pics were overwritten by the more recent backup.
Very sorry!

How can I talk with someone? I have a simple question and it's not answered anywhere in the forums. I have asked it before and repetedly gets swept over

Where do my files have to be in order to use creative cloud and not have my indesign links break? I'll need to use Indesign on different computers and my images won't be traveling with me... will I need to relink every image every time? this gets way too tedious after 5 pages of links are broken. Also,,, why do I need all these plugin's once I use an icloud version of indesign when I've saved the file on my external hard drive, and then open the exact same file from the exact same hard drive? The file never opens and is corrupt which means I have to rebuild the entire thing or physically travel back to that computer which has the indesign cloud.... It's baffling.
And another question... how does adobe not have a live support number to call and ask questions? I've been in the same "click-loop" now forever and I can't ever get to an actual useful forum.

WesternJarhead wrote:
Where do my files have to be in order to use creative cloud and not have my indesign links break? I'll need to use Indesign on different computers and my images won't be traveling with me... will I need to relink every image every time?
Standard practice is to use File>Package and then save to drive/location that suits you. If you need it to travel with you bring the entire folder.
The InDesign file will link to the folder where the Links folder is situated.
WesternJarhead wrote:
Also,,, why do I need all these plugin's once I use an icloud version of indesign when I've saved the file on my external hard drive, and then open the exact same file from the exact same hard drive? The file never opens and is corrupt which means I have to rebuild the entire thing or physically travel back to that computer which has the indesign cloud.... It's baffling.
The file isn't corrupt. The Craeative Cloud version is a newer version than you have on your computer at home. That's why the plugins are missing, as older versions don't have the same plugins as the newer version of InDesign.
If you want to work on a version created with CC - then you need to use file Export/Save and choose IDML - then open that in earlier versions of InDesign.
However, you could install the Creative Cloud on your computer at home and use the same version of InDesign - this would solve your problem without any extra work.
WesternJarhead wrote:
And another question... how does adobe not have a live support number to call and ask questions? I've been in the same "click-loop" now forever and I can't ever get to an actual useful forum.
InDesign has never offered user support in using the software. It's telephone and helpline service is not for that purpose. InDeisgn is a professional graphic designer/typesetter/whateveryourjob is tool.
Like any tool you need to have specific training to it's end use, most people used to do an apprenticeship/trainee position going to college to learn the software and the fine principles of lithographic/screen/flexo/gravure printing and the use of images/text/graphics etc on the web.
It's a professional's tool that requires professional training. Much like I wouldn't go out and buy a carpenters tool set and then complain that none of the tools do what I want them to do, like hammering in a screw.

Slideshow with filmstrip plz help, can't find the answer anywhere!

Hi, I'm def not a website designer but need to do 1 up for myself and am trying to keep it pretty basic.
I'm using 2 widgets, a menu and the slideshow with filstrip. The slideshow worked fine for me but my dropdown menu would always be under it so you couldn't see some of the ones to click on. To fix this I played with the z-index and it finally worked when I added a z-index of -1 to the slideshow. However now the slideshow is simply that a slideshow. I can no longer go forward or backwards or pause nor can I click on the thumbnails to go directly to those images.
Does anyone know what Im doing wrong. Either to get this going or to remove the z-index so the slideshow works but have a way to get my drop down menu then still infront of the slideshow? Its almost as if I need my menu infront of the slideshow but the slide show controls in front of the menu and I have no idea what I'm doing.
Please if you have any ideas or suggestions I would love any help possible, I'm going insane here! :S Thank-you all so much in adance!

sorien,
You can run dual monitors.
The following combinations are possible in DualView mode:
digital monitor (onboard DVI) + analog monitor (onboard VGA)
digital monitor (onboard DVI) + TV (onboard TV out)
As GeForce 6150 has only one RAMDAC (Random Access Memory Digital/Analog Converter), the following combination is not possible:
analog monitor with a DVI to VGA adapter (onboard DVI) + analog monitor (onboard VGA)
analog monitor (onboard VGA) + TV (onboard TV out)
Take Care,
Richard

I can't find this answer anywhere, whats the best way to tune my beats audio on my hp dv6t?

I have an HP dv6t with beats. i think its a dv6t...the tone settings look like this... but on mine i have 4kHz then 1kHz again, insted of what the picture has...? please tell me the best way to tune all this for rap/hip-hop music and the numbers for the bass, def, center, space, and focus THANKS!!! if i repeated a previous post by someone else please let me know where its at and ill delete this post...
This question was solved.
View Solution.

TomTom and the iPhone - I CAN'T FIND AN ANSWER ANYWHERE

1) Will the new TomTom app work with the iPhone 3G as well as the 3GS?
2) If it will work with the iPhone 3G as well, will it require internet connectivity? Or will it have the maps onboard and use the built-in GPS chip? In other words, can I use it in the middle of nowhere?
Thanks!

1) I'm sorry for being rude
2) If I was a developer, I'd want it to use the built-in normal GPS and not rely at all on cell phone tower connectivity. You're right, it says the maps are inside, but I guess I'm worried that it will for some reason still require there to be a cell phone tower signal. I only say that because at no point during the WWDC and nowhere on the site does it stress that the software can be used without cell tower connectivity. I would think they would've at least mentioned that fact if it were true. I mean, it's been a year with the iPhone 3G with a built-in standalone GPS chip, and no map software that uses it.
Also, the dashboard device has its OWN GPS chip in it. I'm worried that maybe you have to have that device in order to use the software outside of tower connectivity.
Message was edited by: Maliathtaibootho

HT4753 I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

It's actually even easier than using Save As to see the full path to the currently open document. Just do a "Secondary click" on the document title in its window's title bar.
Like you, I relied upon Save As my whole life to check a file's location and considered it a must-have capability. Turns out it's even faster to use the single-click method to reveal the full path to the open document. It displays the entire path to the current document starting from the level of your Mac, and works for files stored on drives as well as iCloud.
If you're not sure how to do a secondary click, go into System Preferences, select Trackpad, Point & Click to find the current preference for secondary click on your Mac. If you happen to have a mouse with more than one button, it's probably the right button. As a trackpad user, I check the box to "Click or tap with two fingers," so a simple two finger tap on the title of an open document reveals its full path. This feature actually has been around for a very long time.
Note that this is not the same thing as the Autosave and Versions menu, which is exposed using a little drop down triangle to the right of the title. There is no visual clue for the presence of this feature - you just have to know it's there, probably because this feature goes all the way back to pre-OS X days.

Can anyone answer a very simple question for me ive heard the apple was giving a free iphone 4 or 4s bumper away is there any truth to that?

can anyone answer a very simple question for me ive heard the apple was giving away iphone 4 or 4s bumpers is there any truth to that?

Not any more, no. There was a free bumper program back when the iPhone 4 originally came out. It has long since expired.

A Very, Very Simple Question..... Can't Find an Answer Anywhere.........

Similar Messages

Maybe you are looking for