A video clip import for a new project keeps showing up as a clip from an older project.

So here's the issue, I succesfully imported and trimmed 95% of the video clips from my GoPro today. However, when I upload the piece de resistance, it shows up as a clip from an older project that I've already deleted. Despite showing me the older clip in the imported section, I can still play approximately 1/3 of the actual, new clip. Problem is it stops and doesn't allow me to work with the remaining footage. I've tried importing it straight from the SD card, copying it to the desktop first, etc. No luck. Any advice?

So, it's Photoshop CS3.
Anyway, from what I understood, you open the photo directly form the disk in Photoshop. That is, you don't use Lightroom to open the photo in Photoshop. It just doesn't work this way. As I said above, Lightroom has no way of knowing when to import a photo that has been saved in Photoshop.
If you insist on using Jpegs for derivative files, your best way to go is indeed using Synchronize.
However, I'd advice to use a lossless format, like TIFF or PSD. Why leave image quality on the table (as Jeff Schewe likes to say)? Storage is cheap and you're editing only your best photos in Photoshop anyway.
And as an additional benefit, you can automate the process of importing derivatives:
Configure what file type to use in Prefs: TIFF or PSD, bit depth, color space etc.
Select an image in Lightroom and hit Ctrl+E.
The derivative file is created in the chosen format and opened in Photoshop.
Edit and save in Photoshop.
Voila! Your edited derivative is already in Lightroom.

Similar Messages

  • New to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

    new to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

    So where is LR trying to copy the files?  Check your destination in the Import panel at the right.

  • HT1689 Im having a problem purchasing additional storage the 20GB for $40.00 it keep showing me an error how can i get pass that.

    Im having problem purchasing additioal storage the 20GB for $40.00 it keep showing me an error message, how can i get pass it.

    Is this for iCloud?

  • Dedicated video card important for photo editing?

    I am in the market for a new mbp, for photo editting (Lightroom, and photoshop occationally), debating between the 13" with an external monitor or 15".  I am sure the cpu power of the 13" should be enough.  What about the video card.  Is the integrated video card on the 13"s good enough?  I don;t play video games.
    Thanks!

    I would actually be more concerned with the CPU power on the 13''. Though it will run CS6, the dual core processor will limit performance more than the integrated graphics. The integrated Iris on the 13'' is good enough, but processing speed may be an issue if you are doing heavy editing/ running concurrent processes. You may want to go with the baseline 15'' without the discrete GPU, with even better integrated graphics (Crystalwell), and, most importantly, with the quad core i7 configuration.
    Comparison of the multicore 64bit benchmark test scores from Geeksquad show that CPU performance between the mid 2013 Air and Late 2013 13'' MB Pro are almost identical:
    Macbook Pro Retina (13'' Late 2013): 6206
    Macbook Air (13'' Mid 2013): 6140
    Compare with....
    Macbook Pro Retina (15'' Late 2013): 13429
    http://browser.primatelabs.com/mac-benchmarks

  • Looking for a belt clip holder for my new iPhone 4

    Does anyone know of a case that is made for the iPhone 4 that has a belt clip on it so i can wear it on my hip? I've looked on the web and i can't seem to find one for the 4. The 3G S has them but not the 4.
    thanks in advance

    My bumper case is out for delivery but I keep missing the UPS guy. Once I have it, I'll give it a try in my Seidio holster and let you know how it works. As mentioned, I'm currently using a case-mate case that is working perfectly so I won't be using the bumper case. (but hey, it was free!) My understanding is the bumper case is tight around the dock connector so not a lot of stock connectors fit into the opening.
    Also, for your car, Pro-Clip makes an iphone 4 cradle specifically designed for the iPhone 4 using the original Apple bumper case which sounds like what you have. www.proclipusa.com will get you started and then you pick a vehicle mount and then a holder and the site will walk you through that. Kind of pricy but excellent quality and all custom for the specific car and phone.
    For all the hassle though getting a bumper case to work with anything, seriously, it's probably easier getting a case that is more compatible with stuff. Seidio is a great choice and they make a matching car cradle that works specifically with their case (or a bare iPhone 4 using the included insert) or check out the case-mate. Link below.
    http://www.case-mate.com/iPhone-4-Cases/Case-Mate-iPhone-4-Barely-There-Cases.as p

  • In Mail, one mailbox for Recovered Message (AOL) keeps showing 1 very large message that I cannot delete. How can I get rid of this recurring problem, please?

    In Mail on iMac, successfully running OS X Lion, one mailbox on My Mac for "Recovered Messages (from AOL)" keeps showing 1 very large message (more than 20 Mb) that I just cannot seem to delete. Each time I go into my In Box, the "loading" symbol spins and the message appears in the "Recovered Messages" mailbox. How can I get rid of this recurrent file, please?
    At the same time, I'm not receviving any new mails in my In Box, although, if I look at the same account on my MacBook Pro, I can indeed see the incoming mails (but on that machine I do not have the "recovery" problem).
    The help of a clear-thinking Apple fan would be greatly appreciated.
    Many thanks.
    From Ian in Paris, France

    Ian
    I worked it out.
    Unhide your hidden files ( I used a widget from http://www.apple.com/downloads/dashboard/developer/hiddenfiles.html)
    Go to your HD.
    Go to Users.
    Go to your House (home)
    there should be a hidden Library folder there (it will be transparent)
    Go to Mail in this folder
    The next folder ( for me ) is V2
    Click on that and the next one will be a whole list of your mail servers, and one folder called Mailboxes
    Click on that and there should be a folder called recovered messages (server) . mbox
    Click on that there a random numbered/lettered folder -> data
    In that data folder is a list of random numbered folders (i.e a folder called 2, one called 9 etc) and in EACH of these, another numbered folder, and then a folder called messages.
    In the messages folder delete all of the ebmx (I think that's what they were from memory, sorry I forgot as I already deleted my trash after my golden moment).
    This was GOLDEN for me. Reason being, when I went to delete my "recovered file" in mail, it would give me an error message " cannot delete 2500 files". I knew it was only 1 file so this was weird. Why 2500 files? Because if you click on the ebmx files like I did, hey presto, it turned out that they were ALL THE SAME MESSAGE = 2500 times. In each of those folders in the random numbers, in their related message folder.
    Now remember - DONT delete the folder, make sure you have gone to the message folder, found all those pesky ebmx files and deleted THOSE, not the folder.
    It worked for me. No restarting or anything. And recovered file. GONE.
    Started receiving and syncing mail again. Woohoo.
    Best wishes.

  • I used Target mode to transfer files to a new iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and po

    IS THE SITUATION HOPELESS
    I used Target mode to transfer files to a new i7  iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
              Please tell me how to get this disc to eject !

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • Why is Import Video greyed out for a new Flash project?

    I have been trying unsuccessfully to load any MP4 (H.264 encoding), FLV, or F4V files into a brand new project. I've tried importing FLV and F4V files via the Import to Library and Import to Stage menu choices but all result in "One or more files were not imported because there were problems reading them" error message. I just downloaded Flash CC today (Feb 23, 2014) and cannot even get started on my project since I cannot seem to load a video into the library or stage. I've looked at the tutorials, but they assume that I can choose the greyed out Import Video... menu choice. Searching the discussion didn't help me as most of the discussions are off-topic or from 2 or more years back.
    Thanks,
    Xtraspatial

    Thank you sinious. I had QT 7.5.5 installed. The problem was unrelated. Like a bufoon, I created a new HTML5 canvas, which is unable to import videos. When I switched to a AS3 canvas all was as it should be. And there was rejoicing throughout the land! Case closed.

  • Video card options for a new Mac Pro

    My G5 recently died on me and I am getting ready to upgrade to a Mac Pro. My question is regarding the video card options. I will be using Aperture 2, Photoshop CS2, and Final Cut Studio, but, not doing HD work. I am trying to decide between the ATI Radeon HD 2600 XT 256MB and the NVIDIA GeForce 8800 GT 512MB.
    As my G5 has stopped working, I was not prepared for an upgrade and I am trying to cut corners where I can. Does anyone have any experience comparing these two cards? Am I being to nitpicky about a $150 upgrade? My gut feeling is that I should not be questioning the extra cost and go with the NVIDIA, but, just want to make sure that I am not wasting money for a difference I will not see, as I do not play games on my Mac. Any opinions and input from other users is greatly appreciated. Thank you.

    Very interesting, I went to that link and then followed the one for Pro Apps:
    http://www.barefeats.com/harper10.html
    And, it states that the Radeon with less memory will consistently outperform the Nvidia on programs like Final Cut and Aperture. Guess I AM better off saving the money. Thank you for your direction!

  • Is there a Thunderbolt to Component Video cable / adapter for the new iMac?

    Hello!
    My church is looking to purchase a new iMac to run our presentation software.
    We currently have a PC that has a graphics card which has a component-out cable.  We connect that to a component video distribution amplifer to distribute to several HDTVs and a projector.
    Is there a way to connect the iMac to a component video (Y, Pb, Pr or Red blue Green) input?
    I understand that DVI is digital and Component is analog, but has anyone found a device, cable, and/or adapter that will do the job?
    Thanks,
    Randy

    There's at least this one:
    http://www.amazon.com/DisplayPort-Composite-Video-S-Video-Converter/dp/B004VV8R8 6
    and the review says that it works with current Macs, but I can't verify.
    Regards.

  • While working on FCPX project, power failed. Power on, restarted, opened FC, Project Library shows blank icon, no clips. Click on icon, nothing happens. Haven't done back-up. Can project be recovered?

    While working on a FXPX project, there was a power failure. Power back on, restarted FCPX, project name in Project Library is a blank icon, nothing happens when I click on it. Believing back ups were automatic and continuous, I made no back up. Can the project be recovered?

    Years of fine internet use via WIFI then randomly it starts dropping then one day (weeks later) it is no longer accessible at all and even saying "No hardware installed" when I click on WIFI icon at the top right on screen. Here is how I finally fixed it!:
    For six months I wallowed in this problem and had to connect my macbook pro to the internet via ethernet cable which as you can image was very restrictive :/
    I have had numerous laptop technicans befuddled by this WIFI problem and most concluding with how my WIFI card must be broken and that I will need to buy a new one. The last suggestion I had on the matter was to buy a USB wifi dongle.
    So I ended up buying this one, http://www.asus.com/nz/Networking/USBN10_NANO/Unfortunately my macbook pro didn't want to read the install disc and it didn't autorun so it didn't work. After reading more forums I saw that you could download the program from the net and sure enough it worked.. BUT STRANGER when I took the USB dongle out the WIFI was still working!! The program appears to have reminded my four year old macbook pro that it is indeed WIFI capable.
    So to find this miraculous program its located herehttp://www.asus.com/nz/Networking/USBN10_NANO/HelpDesk_Download/
    Same link as above just under SUPPORT>Driver&Tools
    You then click on a file when its downloaded and a file called MAC will appear, then click on install. Within 5 minutes you should have your WIFI back. My macbook pro crashed again today but without having to get the shortest ethernet cable you've ever seen out again - I was able to install the program again and WIFI was up and running once more. Moral of the story - didn't need to spend any money to fix this and not even using the USB dongle.
    So happy!! Hope it works for you too!
    This also worked on a MacBook that lost its WIFI when a user accounts password was changed and the keychain password wasn't known to them - another random way to lose WIFI apparently

  • HT1386 If I have a library of music on my ipod but just got a separate itunes for my new computer, how can i transfer the music from my ipod onto my new account?

    I got a new itunes account on my new computer. My ipod has all the music from my previous account. I would like to transfer the music from my ipod to my new account. Is this possible?

    Hello hevcheer,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    You can sync purchases from a ipod to computer.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/HT1848
    Purchases cannot be transferred from account to account.
    Best of luck,
    Mario

  • The image for my new podcast doesnt show up in iTunes

    I started a new podcast called Silph Radio A Pokemon Podcast.  Everything else worked fine, but the image is not showing up for the podcast.  When I first attempted to submit my podcast, I was told my image had to be at least 600x600 pixels and it wasn't big enough, so I fixed the problem and resubmitted.  This time it worked.  My podcast was approved and appears in the store, but the image is absent.  What do I need to do to make my podcasts image appear?

    The RSS is at www.secretroommultimedia.com/silphradio/silph.xml

  • App store for my new imac keeps telling me to turn cookies on...when I do have them on? How do I fix this..

    I bought this computer today and went to update my software and then it told me to sign in so I did, then it brought me to a review page and said turn cookies on, which I did by going to safari preferences and hitting never block. But I restarted computer and it still says I don't have cookies on which...is...so I can't do anything. What do I do?

    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account
    Creating an iCloud account- Frequently Asked Questions
    Frequently asked questions about Apple ID
    Apple IDs and iCloud
    Frequently asked questions about Apple ID
    iTunes- How to set up an Apple ID within iTunes

  • What's new app keep showing "updated"

    Hi support team,
    Whenever I press the "Refresh " button of Software
    Update function, there's always prompt "What's new updated " message even I already uploaded the app.
    Tried to clear its cache and force stop and reinstall the app but still the same.
    Appreciate your consideration on this issue. Thanks.
    Information :what's new app version v.2.0.A.0.11,current OS :Lollipop 5.0.2, Software no.14.5.A.0.270, Xperia Z1,model :c6902
    Solved!
    Go to Solution.

    @RumRai7
    Could you post a screenshot?
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Maybe you are looking for