A way to connect multiple drives at same time?

Are there any current products or soon to be released products that will allow me to place multiple bare drives into an enclosure and connect the enclosure via thunderbolt so all of the drives will be accessible at the same time on a Mac? I have a Macpro and have multiple drives in it and am trying to find a way to also do this with a new iMac.
Thanks.

The Elite Pro Dual + Thunderbolt Adapter
states
Set up as individual volumes, RAID-1 Mirror, RAID-0 Stripe, or SPAN via Apple's Disk Utility or Windows PC RAID utility.
So it might work for you.

Similar Messages

  • RV042 VPN Client Access not able to connect two users at same time

    I have a RV042 and have set it up for VPN Client access using the QuickVPN client to connect my remote users. I discovered today that I cannot have two users connect in at the same time. Both users are in the same remote office. They can connect individually with no problem but if one is connected and the other tries connect also the second user gets a message the gateway is not responding. They are both running WinXPPRo SP3. Any help is greatly appreciated.

    Were your QuickVPN clients behind a firewall router of some sort? For multiple QuickVPN clients to be able to connect to the remote RV042 at the same time, the local firewall router must have VPN Passthrough correctly implemented. You could try using a RV042 as the firewall router for your QuickVPN clients and you should be able to maintain 2 tunnels at the same time to the remote RV042.

  • Connect two ipods at same time?

    I have a fortunate problem/question. My son got a nano ipod and I got a 30MB ipod. We both would like to charge them and get running. Can you connect both at the same time? I have two USB ports and could physically do it. I know that you can use multiple units with a single computer, but there is nothing about charging them at the same time in the documentation.
    Thanks

    I've had 3 ipods connected at the same time. They all show up under Devices.

  • How to change Payment Terms in multiple orders at same time?

    How to change Payment Terms in multiple orders at same time?
    I have got 10,000 Order, I need to change the payment terms for all these Orders.
    Can I Know the way out for this.
    Regards,
    Dantham Conpolwedson
    Edited by: Dantham Conpolwedson on Mar 25, 2009 11:18 AM

    Hi
    There are as many options for that
    You can go for
    1)MASS t code
    2) LSMW  (by recording)
    3)BDC (by recording)
    and the most easiest way is by doing the MASS tcode
    goto MASS and enter the object type as BUS2032
    execute now select the sales order haeader data and execute and now enter the sales doc from and to range and execute now all the sales dox will be displayed
    and from the menu click on select fields  and select the terms of payment
    now select the terms of payment row and enter the new values  and click on carry out new changes
    regards

  • How many pcs can connect to hub at same time

    how many pcs can connect to hub  at same time, I have looked everywhere and if you know where did u find the answer,  many thanks

    Most routers specs I've seen have a theoretical maximum of 256, but obviously due to practical performance issues would likely limited to less than 20.
    As said, usually more than a home user would need.
    Check your exchange or major service outagesIf someone has given a helpful answer, please click on their Ratings star on the left-hand side. ***

  • Best way of connecting multiple hard-drives to imac?

    Hi - can anyone suggest the best way/alternative way to connecting 2 LACIE d2 extreme hard-drives to my imac G5.
    Dilema - I don't have enough native firewire ports to have both drives direct to the imac. I don't have any firewire 800 sockets on the imac and I don't have enough native usb ports (although I don't really want to use USB anyway!).
    Although I have both USB and Firewire hubs - I am not keen at putting harddrives through hubs.
    However, what I was thinking (and this is the question really - has anybody done this?) - is it ok/stable to connect one drive to the other with firewire 800 cable and take the output of these two via firewire 400 to the imac? Is this an exceptable solution or are there any obvious alternatives I am missing?
    Has anybody done this? Does it work fine/fast enough for video/audio projects?

    I was disappointed at the lack of a second Firewire 400 port for chaining Fire wire devices on the LACIE drive when I got it, not that its a huge deal I guess.
    So basically you want to try
    [Drive 2] <<FW 800--Cable--FW 800>> [Drive 1] <<FW 800--cable--FW 400 >> [iMac FW 400 port]
    or
    [Drive 2] <<FW 800--Cable--FW 800>> [Drive 1] <<FW 400--cable--FW 400 >>[iMac FW 400 port]
    I have no idea if this would work or not, cant wait to see if you can pull it off or not. For the first example it would depend on whether the FW 800 bus in the drive fell back to 400 speeds properly.
    For the second example it would depend on whether the FW 800 and FW 400 connections in the drive were bridged or not if not then it would only see the first drive.
    Hopefully someone has some first hand info out there. Good luck
    --Spire

  • Multiple ResultSets from the same connection occuring at the same time

    Is it possible to have the following code? The issue is that you are iterating through two result sets created from the same connection at the same time.
    try {
    Connection conn=createConnection();
    Statement s=conn.createStatement();
    ResultSet rs=s.executeQuery(someSQL);
    while (rs.next()) {
         Statement s2=conn.createStatement();
          ResultSet rs2=s2.executeQuery(someOtherSQL);
          while (rs2.next()) {
               //do something
    } catch (SQLException sqle) {
    } finally {
    freeConnection(conn);

    Joel,
    The code compiles, but I have not tried running it. It is a question I need to know, designing a program.
    The question is whether some error would come up or the first ResultSet would be corrupted because a second were created before the first one was closed.
    --Gabe                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • HP Stream 8 tablet cant see external & internal drives at same time

    I have an HP Stream 8 tablet. I have plugged an OTG 64gb flash memory card Sandisk Dual USB drive into the tablet charging slot. The Tablet recognises all of the 64gb of storage & can read & write to the drive with no problems.
    However, when an external storage  drive is plugged in, the device cannot see the 32gb sandisc micro usb , which I installed . The tablet only seems to be able to see 1 removable drive at one time, which is frustrating as I cant then copy items from the micro sd to an external drive.
    Is there a way to make windows/hp stream tablet see all drives at the same time. I have insufficient space on the built in 32gb drive , after win 8.1, office 365 & other programmes are installed so I can't  copy items onto that drive.
    When the external flash is connected, I can only see the C: Drive & the plugged in flash drive. When the external flash drive is disconnected, I can then see the c: Drive & the microsd32gb card.
    One of the problems I think is that the tablet doesnt seem to always assign drive letters to extra storage drives. How do I activate this?

    It's something to do with the OTG 64gb flash memory card Sandisk Dual USB drive.  Mine sees an internal 64GB uSD & a flash drive connected with an OTG cable.  Drive letter asssignment is a Windows thing.  You can customize it with USBDLM.
    http://www.uwe-sieber.de/usbdlm_e.html

  • Can I have 2 Bluetooth connection active at the same time? Works with other phones...

    Is it possible to have one Bluetooth connection for "phone audio" and a 2nd connection for "A2DP" music streaming at the same time on my iPhone 5? My car-stereo has Bluetooth for phone calls but NOT for audio streaming. However, there's a 3.5mm aux in on the head unit. On my S5 I can create one Bluetooth connection to the car-stereo and select "phone audio" and a 2nd for my Bluetooth aux-in adapter. It works perfect since months but last week I changed back to an iPhone (5s) and it appears that I can only have ONE BT connection active at a time!?  Any ideas anyone?

    Hi SwedelostinAmerica,
    Welcome to the Apple Support Communities!
    The iPhone can maintain multiple pairing records, but it can only connect to one headset or hands-free device at a time. However, in your situation there may be a solution. You can connect the iPhone via Bluetooth for calls and use the 3.5mm jack on your iPhone and car radio to connect for music.
    The following article explains Bluetooth pairing and usage. Please use it as a reference.
    iOS: Third-party Bluetooth accessories
    http://support.apple.com/kb/HT1664
    Have a great day,
    Joe

  • Editing multiple clips at same time

    Hi, I am attempting to edit a project that, among other things, has multiple subtitles. So each subtitle that appears on the screen is its own seperate clip. If I want to make an edit to all of the clips of subtitles at the same time (for example, to add drop shadow) is there a way i can do this without having to edit each clip individually?
    As well, I am trying to put 1.85:1 aspect ratio on the project. I was able to put widescreen (1.67:1) on the entire project at the same time, but have been unable to figure out a way to make alterations to the entire project at the same time. Again, would I have to go through every clip and change the widescreen ratio, or is there an easier way?
    Thanks in advance! noah

    thats not really the way it works
    what you'd do is edit within the nest ... just double click the nest 'clip' and it opens up in its own timeline
    an alternative is to add a cropped color matte on an upper video track to give you the letterbox, or you could build a widescreen matte in photoshop and drop that on an upper track (or you can download my letterbox generator from David Slaters http://www.proapptips.com/ site, you'll need to register first then go to the MyDownloads section)

  • Backing up to two external drives at same time

    I have two external drives, one for Time Machine and one using SuperDuper, both using USB. Can both be running at the same time or should one be disconnected before running a backup on the other? Thanks

    Both can be used at the same time.
    If the backups run at the same time, both will be trying to use USB at the same time, so both will be slowed down.
    Unless TM is doing a large backup, though, the impact should not be great.
    And it's best to leave them connected at all times, rather than connect and disconnect (unless you're taking one off-site).

  • Triggering a sub work flow for multiple users at same time.

    I have a scenario in which I have created sub workflow as an activity for approval process. This sub work flow should be triggered for multiple users at the same time and their decison is independent of each other.
    This is like creating multipe instance of the same sub work flow and then the sub work flow runs indepedently as a new work flow for each of the approver and the process is completeded for approver independently.
    How can this be achieved?

    Tyr to do like this,
    1. First include the subworkflow in the main workflow template.
    2. Now include standard Block Step in the main workflow template.
    3. In the block select the block type as ParForEach.
    4. Before doing the 3rd point make sure that all the agents for whom you want whom you want to initiate the workflow, populate them in a Multiline conatiner element.
    5. Once completing 3rd and 4th points open the block step under the tab ParallelProcessing  assign the multiline container element name in the   for e;g if the multi line container element name is COSTCENTER then do the binding like below. the conatiner element COSTCENTERLINE is created by default once you include the multi line conatiner element under parller processing tab.
    &COSTCENTER[&_WF_PARFOREACH_INDEX&]&   -------->     &_COSTCENTER_LINE&
    Now assign the agent of the subworkflow as COSTCENTERLINE , imean if suppose you have 3 entries in the internal table then three separate and for three different agents the workflow is instantiated.

  • Is there a way to delete multiple emails at one time?

    I did a search but didn't find anything on this.
    I just got the new 3G and when I setup one of my email accounts (not .mac) it downloaded 700 emails from that account even though about 600 had been previously deleted.
    Is there a way to select multiple emails for deletion? Deleting that many one at a time would be tedious to say the least.

    These messages may have been deleted from the email client used on your computer for accessing the account but they weren't deleted at the incoming mail server for the account. If so, the iPhone's Mail client would not have downloaded these messages.
    With the mailbox selected, select edit. Each message that you want to delete must be selected which will place a check in the circle to the left of the message.
    Select Delete at the bottom.

  • Connecting multiple companies at a time????

    hi all,
             Can we connect to multiple companies at a time through DI-API.this is the coding where i connect to single company through combobox..
           oCompany.CompanyDB = Combo1.Text
            oCompany.UserName = Text1.Text
            oCompany.Password = Text2.Text
            lRetCode = oCompany.Connect
    but i want to connect to 3 companies at a time using list box items(3 items)...i have that doubt whether cn we connect at a time???
    regards,
    shangai.

    hi,
    this is the coding iam trying to connect multiple companies....the first company is connected successfully but from 2nd company it's showing as -116 error..this is the coding iam using...
    For N = 0 To lstDealerDb.Items.Count - 1
                        j = lstDealerDb.Items(k)
                        k = k + 1
                        oCompany.CompanyDB = j
                        oCompany.UserName = Text1.Text
                        oCompany.Password = Text2.Text
                        lRetCode = oCompany.Connect
                        If lRetCode <> 0 Then
                            oCompany.GetLastError(lErrCode, sErrMsg)
                            MsgBox(sErrMsg)
                        Else
                            MsgBox("Connected to " &  oCompany.CompanyName)
                            Me.Text = Me.Text & ": Connected"
                        End If
                    Next
    regards,
    shangai.

  • Error when sending multiple request at same time

    When we send multiple request at the same time, we get an error.
    Same scenario
    XIServer:AE_DETAILS_GET_ERROR:Error while reading from the secure store:
    ERROR_U: No service user password found for Adapter Engine
    The first request is processed OK, it's the second one that gives the error...
    Anybody any ideas?

    Check out the below thread : Re: No service user password found for Adapter Engine
    May be some of the solution from the thread will work for you.
    Thanks,
    Pooja Pandey

Maybe you are looking for