A way to find as to a variable from table TAVRV is used in which program?

Hello Experts,
Is there a way to find as to a variable from table TAVRV is used in which of the variants and in what programs. Example: can we find a variable ZZ_AAAA_ACTUEL (from table TVARV) is used in which variants / programs?
I want maintain one variable and i will be sure that not affect others programs.
Regards.

Hi Salhi
open your table in SE11 and click on that variable, then there is a option 'where used list' in your application tool bar
click on that option, it will give you a small pop up window from where you can select in which options you want to search for that variable.
i hope this will work for you
Thanks
lalit Gupta

Similar Messages

  • Is there a way to find where you imported files from?

    I imported a batch of photos from a wedding. Edited them all, and then I moved the original files from their native folder. This created the "This file is offline or missing" dialogue. I tried moving the files back but with no luck. I think I just forgot where they were originally at.
    So, my question is, is there was a way to find out which folder you imported the files from so I can put them back in place and export them without losing a weeks worth of edits?
    Thanks,
    Cody

    If you left click on the question mark it will throw up a dialogue (a) advising you that the file is missing (b) show you the last location it was located and (c) offer you the option of pointing LR in the direction of where the image can be found. Often, when LR is given the new location for one image it manages to do the rest.
    The alternative is to right-click on the top level folder in the libraries left hand panel and choose 'locate folder'. Again, once the top level folder has been located LR usually updates the sub folders.
    When moving folders etc around it is better to do this from within LR itself therebye preventing these sort of problems.

  • Is there any way at all of accessing captivate variables from flash?

    Hi,
    I would be grateful for any help on this one.  I have been working in flash and I wanted to know whether there is any way at all of calling/accessing captivate 4 variables from flash (I'm working in flash Cs4 Actionscript 3.0 and I'm trialling Captivate 4, but I just want to know whether there is any way/method of communicating between a flash file and a captivate 4 file, and if so, can this be done with an embedded captivate 4 file/swf).  Surely there must be a way of communicating between the two - they are both Adobe products!
    Thanks for any help, pointers, advice, tips in advance.

    Hi Louon,
    Don't know if this would help you.
    http://blogs.adobe.com/captivate/2009/09/captivate_variables_-_how_to_a.html
    We have many experts here who could give more precise answers.
    Cheers.
    Miguel

  • Is there a way to request values of configuration variables from EM?

    Hi, All.
    Please advise is there a way to request values for some configuration variables from EM.
    For example there is a variable - DefaultRowsDisplayedInDownload.
    How can I get its value in Repository or Analyses?
    My use case is: disable navigation in aggregated report with count > DefaultRowsDisplayedInDownload
    Thanks in advance.

    I dont think you can call them in analysis since these tags are used in the form of xml files used as instructions to the application, within the application you may not use them.
    More over there is no syntax as obiee variable to call them.
    if helps pls mark as correct/helpful

  • Cant find the pictures I imported from my digital camera using iphoto

    Hi,
    I have a macbook pro and imported part of some photos from my digital camera using Iphoto. When it prompted me whether the photos should be deleted from the camera, I chose 'yes'. It deleted the pictures from the camera, but I cant find them anywhere on iphotos. I have tried searching for the pics on my mac using the 'finder', but had no luck.
    I repeated the same thing.. took some more pictures and tried to import part of them and then delete the same pics from the camera. Iphotos did the same thing..
    I usually import all (and not part) of the pictures from my camera and then use the same option to delete the pictures from the camera after importing them to iphotos. This has always worked.
    Please help. Thanks,
    Kanchan

    In the Event mode make sure the sort order is By Date ➙ Descending.  That will put the newer Events at the top of the window.  Check there to see if they are there or not.
    The safest method to get photos from a camera to the library is to upload them to a folder on the Desktop first.  That makes sure they are safely on the hard drive.  From there you can import the folder into the library and when you've confirmed they are in the library you can delete the folder from the Desktop and have the camera reformat the memory card.
    OT

  • How to find that a statement is used in which programs

    Hi Experts,
    Is it possible to find the statement "gi_tline-tdformat = ‘>*’ " is present in which programs?.
    Please reply.Its urgent.TIA
    Regds
    Abhishek

    Another option is SE38->Utilities->Find in source code->enter string into "Find" field -> Programs to Be Included: e.g., 'In Program" select options-> enter Search range (e.g., Z*)->select all.
    Kind Regards

  • Function module to find out the changed values from tables

    What is the standard function module to find out the changed values (the old & new values) from tables in SAP ?

    Hi Harish,
    Please elaborate your requirement...
    Please have a look on CDHDR AND CDPOS tables... it contains changed data... but all chages are not being tracked using it..
    Try Below FMs as well..
    For Header Level...
    CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
        EXPORTING
          date_of_change    = cdhdr-udate
          objectclass       = cdhdr-objectclas
          objectid          = cdhdr-objectid
          time_of_change    = cdhdr-utime
          username          = cdhdr-username
        TABLES
          i_cdhdr           = icdhdr
        EXCEPTIONS
          no_position_found = 1
          OTHERS            = 2.
    For Item Level
    CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
          EXPORTING
            changenumber      = icdhdr-changenr
          IMPORTING
            header            = cdhdr
          TABLES
            editpos           = icdshw
          EXCEPTIONS
            no_position_found = 1
            OTHERS            = 2.
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7
    ilesh Nandaniya

  • Is there an easy way to find out your  Bind Variables?

    There are times I get called on a Production Performance problem a little too late. The only way I can trace what happened is by running Statspack reports for an hour or two earlier. But the Top sql comes with bind variables. And without knowing the actual data value it is difficult for us to guess if that is the problematic sql. Is there an way we can find the value for these Bind variables back in time?

    What Oracle version are you on?
    In Oracle 10g, V$SQL_BIND_CATPURE view provides what you want. But keep in mind that bind capturing in not happening on the fly. When the SQL statement is compiled(hard parse), the bind value is captured. And after Oracle periodically updates the bind value.
    If AWR is enabled which is default, you have DBA_HIST_SQLBIND view which provides historical snapshots for V$SQL_BIND_CAPTURE. This may be helpful for you.
    Not in Oracle 10g, it's beyond my knowledge. :)

  • My ipad (including the box) was stolen but icloud is saying I have no devices registared with my account. Is there a way to find my ipad, as it was the only one used with that apple id?

    Is there anyway of tracking my ipad using only the apple id account that I used on it?
    It hadn't hardly been used for anything other than updating to iOS7 recently...

    No, sorry, there is no way you can get that information. The police perhaps could, but it would probably require a court order and it's unlikely the police will go to those lengths unless they have reason to believe that this theft was not an isolated instance and hence worth more of their time than the single theft of an iPod.
    Even if they got the ID, it may well just be yours. Apple's registration database often contains such errors; I get the same message for some of my devices when I know I registered them to my Apple ID and the devices are all still right here.
    Regards.

  • Where can I find the "Shared Variable Properties" VI to be used in my program for configuring SV remotely?

    I was using the "configure Alarms" and "configure Logging" VIs to design two user interfaces to make use of these VIs when I came across a problem.  In both VIs you can enable logging of alarms.  So which one is valid?  Which one has priority?  Then I looked at the "Shared Variable Properties" built into the project explorer.  Now I realize that I am spending all of this time redesigning this properties dialog (which also has two options of enabling logging of alarms (on the Alarms tab to the far right side as well as on the Logging tab).  So now my question is, how do I access this "Shared Variable Properties" dialog through my program (Note: this would be on a different machine than where the shared variables are set up.  The point is to configure shared variables remotely).
    Thanks
    Matt

    Here is a VI I re-created and posted for all.  I'm not sure why NI doesn't provide their VI to the developer.  The only thing I can't figure out is that when reading in the "Ack Type" into a variable, it generates an error.  It will work if you go into "project explorer" and right click on the library with the shared variable and "deploy" but eventually stops working.  I have tried using the "undeploy library" and "deploy library" to see if this would be a work around but had no success.
    Just pipe the path of the shared variable into the vi.
    Mattk
    Attachments:
    Shared Variable Properties.vi ‏95 KB

  • Any way to Find correct set of Media from Browser within project?

    I've been working on a bunch of projects for a couple of years -yes- and periodically backed up various media elements to other hard disks.
    Now I have a problem. Since FCP4.5 places media in the last project's selected folders and because of my backups, I no longer know which set of media some items in my browser are referring to. Duh.
    By selecting items in the Browser or Timeline or annnnywhere, can FCP tell me where the media I am actually referencing is located. (Since I have multiple "backup" copies of media in multiple folders on multiple drives, this is a problem)
    Thanks muchly to all.
    Sincerely, duh
    Frank
    FCP 4.5 HD
    G4 800 (2002)   Mac OS X (10.3.9)   1.5GB RAM, FCP4.5, DVDSP3, Motion1,QT6Pro, Finale, Digital Performer, MOTU 896HD

    If you select the clip in the browser, and right
    click or CNTRL-click on it, on the menu that pops up
    there is REVEAL IN FINDER as an option.
    Now you see the importance of being extremely well
    organized. Simply choosing the media drive as your
    capture scratch will create folders that separates
    footage by project. If you try to make folders and
    do all the naming yourself, then you'll have to be
    diligent in changing the capture scratch when you
    change projects. But really, just let FCP do it's
    thing. It is very well thought out. AVID doesn't
    separate media by project like this...it is a huge
    plus.
    Shane
    The organization recommendations are great.
    But, for finding the clip . . . Thanks. I tried that, but my options in FCP4.5 show only
    Open in viewer
    Open in new viewer
    Open in editor
    Batch capture
    Reconnect Media
    Media Manager
    Make offline
    Duplicate as new master clip
    Merge clips
    Export
    Batch Export
    Cut
    Copy
    Item properties
    Label
    If that's a new feature in FCP5, I might be stuck. Or did I do something wrong. I tried right-click and control-click and got the same options. Didn't see REVEAL IN FINDER.

  • Is there a way to find old ( iPhone) back ups from iTunes

    where are they stored (mac)

    You're welcome.
    FYI:
    iTunes only keeps ONE normal backup, per device. It's actually an incremental backup, in that only data that has changed is actually backed up. Any other backups listed would be backups from restore points. These backups are time/date stamped and are not overwritten.

  • Can I set a Session Variable from a Dashboard Prompt, using values that are

    Hi All
    Trying to set a Session Variable to an integer value, by letting users select a text value from the drop-down list on a Dashboard Prompt. The goal is to set the input parameter to the IndexCol function, but to provide the end users with a text description of what they are setting.
    Select Value Set Variable Value
    My 0
    My Team 1
    My Companies 2
    My Teams Companies 3
    Any suggestions on how to accomplish this? Certainly we could populate the drop-down from a data source, however I don't see how to populate a variable with something other than the values on the screen.
    The IndexCol function is referenced in a Filter in Answers, and I'm thinking to populate a Session variable using the (Presentation) variable value set from the prompt. But how to do this? I see a reference to a function NQSSetSessionValue(), but cannot find documentation on how it works.
    Any clue will be greatly appreciated.
    Thanks

    Hi kishore..
    Looks like the link u have sent uses advanced SQL tab to set session variables. I want to know if I can use "set variable NQ_SESSION.myvar= @something" in the "SQL results" -while creating a dashboard prompt-.
    Purpose: I want the session variable to be set based on whatever report that im currently in.
    And i dont want to use presentation variables because im using a reset button in my page.
    My reset script resets presentation variables and NOT session variables.
    Thanks in advance
    Loy

  • Find gap between two dates from table

    Hello All,
    I want to find gap between two dates ,if there is no gap between two dates then it should return min(eff_dt) and max(end_dt) value
    suppose below data in my item table
    item_id    eff_dt           end_dt
    10         20-jun-2012     25-jun-2012
    10         26-jun-2012     28-jun-2012 There is no gap between two rows for item 10 then it should return rows like
    item_id eff_dt end_dt
    10 20-jun-2012 28-jun-2012
    item_id    eff_dt           end_dt
    12         20-jun-2012     25-jun-2012
    12         27-jun-2012     28-jun-2012 There is gap between two rows for item 12 then it should return like
    item_id eff_dt end_dt
    12 20-jun-2012 25-jun-2012
    12 27-jun-2012 28-jun-2012
    I hv tried using below query but it giv null value for last row
    SELECT   item_id, eff_dt, end_dt, end_dt + 1 AS newd,
             LEAD (eff_dt) OVER (PARTITION BY ctry_code, co_code, item_id ORDER BY ctry_code,
              co_code, item_id) AS LEAD,
             (CASE
                 WHEN (end_dt + 1) =
                        LEAD (eff_dt) OVER (PARTITION BY ctry_code, co_code, item_id ORDER BY ctry_code,
                         co_code, item_id, eff_dt)
                    THEN '1'
                 ELSE '2'
              END
             ) AS new_num
      FROM item
       WHERE TRIM (item_id) = '802'
    ORDER BY ctry_code, co_code, item_id, eff_dtI m using oracle 10g.
    please any help is appreciate.
    Thanks.

    Use start of group method:
    with sample_table as (
                          select 10 item_id,date '2012-6-20' start_dt,date '2012-6-25' end_dt from dual union all
                          select 10,date '2012-6-26',date '2012-6-26' from dual
    select  item_id,
            min(start_dt) start_dt,
            max(end_dt) end_dt
      from  (
             select  item_id,
                     start_dt,
                     end_dt,
                     sum(start_of_group) over(partition by item_id order by start_dt) grp
               from  (
                      select  item_id,
                              start_dt,
                              end_dt,
                              case lag(end_dt) over(partition by item_id order by start_dt)
                                when start_dt - 1 then 0
                                else 1
                              end start_of_group
                        from  sample_table
      group by item_id,
               grp
      order by item_id,
               grp
       ITEM_ID START_DT  END_DT
            10 20-JUN-12 26-JUN-12
    SQL> SY.

  • I want to find where the field of a table has been used

    Thanks.Deniz.

    If u want to display the where used list of a Database table field. Just select the field and there is button where used list in SE11, just press that button. It will display all the programs, tables used this field.
    If u want to find it in a program just press Ctrl+F and type the name of the field and press enter it will display all the program lines where it is used...
    reward points if helpful.
    with regards,
    Srinivas.

Maybe you are looking for