A way to set presets for Keylight?

Is there?  I see myself using the same 4 things over and over.  It'd be nice to have custom presets.  Is this possible?

Mylenium's right about the preset, but I don't know how useful it would be. 
In my experience, you always end up tweaking a preset to pull the absolute best key.  The exception would be if you shoot in a studio using the exact same lighting conditions every time at the exact same exposure.  You could probably do it then without wondering, "Is that the best key I can get?"

Similar Messages

  • I want to install CCPL ,but it is not taking PAC file proxy.So please suggest an alternate way to set proxy for this exe file..

    I want to install CCPL ,but it is not taking PAC file proxy.So please suggest an alternate way to set proxy for this exe file..

    That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

  • IPad 2 Mail: Is there a way to set Rules for folders, similar to Mail in the iMac?

    iPad 2 Mail: Is there a way to set Rules for folders, similar to Mail in the iMac?

    Based on your answer, and the answer to another question (which I didn't see before I asked mine, even tho I searched), I get the impression that iPad Mail is just a different face on web mail, that the messages are only stored on the server, not downloaded and stored on the iPad 2. Is that correct?

  • Assistance Setting Presets for Exporting to .FLV

    I need assistance in customizing the presets for exporting a file to .flv format. Here is what I need Abode to export TO:
    .flv
    320x240
    4:3
    800kbps
    29-97 fps
    audio - 44 khz 66kbps stereo

    Jesse_Martinez(Calvary)
    Your requirements are stated as
    .flv
    320x240
    4:3
    800kbps
    29-97 fps
    audio - 44 khz 66kbps stereo
    You can accomplish nearly all in Premiere Elements 12, but there is a problem achieving the exact audio sampling rate/bitrate combination that you list.
    In Premiere Elements 12, go to Publish+Share/Computer/Adobe Flash Video and select Presets = FLV - Web Large NTSC Source (Flash 8 or Higher)  On2VP6 MP3 FLV
    Under the Advanced Button/Video Tab, make adjusts
    Remove the link between Frame Width and Height and type in
    Frame Width = 320
    Frame Height = 240
    Bitrate = 800 kbps (kilobits per second)
    Under the Advanced Button/Audio Tab, make adjusts
    Output Channel = Stereo
    Bitrate Settings - now here is where it get tricky...there is no set for sampling rate/frequency = 44 KHz or other. And, there is no audio bitrate of 66 kbps (closest is 64 kbps), There appears to be a sampling rate associated with the export, but viewable once you have the export and look at its properties in a program such as MediaInfo.
    Here is what I found
    if the audio bitrate = 64 kbps, then the sampling rate is 22.05 KHz
    if the audio bitrate = 80 kbps, then the sampling rate is 22.05 KHz
    if the audio bitrate = 96 kbps, then the sampling rate is 44.1 KHz
    if the audio bitrate = 128 kbps, then the sampling rate is 44.1 KHz
    Are there trade offs for you or must you have those exact values that you posted?
    H.264 AAC F4V
    If you were to export your Timeline as F4V, then you would have the opportunity to set sampling rate 44.1 KHz and bitrate 64 kbps.
    We can discuss other not mentioned settings later once we have worked through the core ones.
    Please review.
    Thanks.
    ATR

  • Hello, I trying to create a program that would run a household furnace. I can't find a way to set timers for the ignitor,flame sensor and blowers. Any thoughts.

    Hello, I'm trying to create a program that would run a household furnace. I can't find a way to set timers foe the ignitor,flame sensor and blowers. Any thoughts would be greatly appreciated. Thanks, primetime

    In the detailed help for the event structure there is a link to caveats and recommendations for using event structures.  It is a good starting point.
    It is courteous to let the Forum know when your questions are related to a school assignment or homework.  We are glad to help you learn LabVIEW, but do not do your homework for you.
    You have learned the major disadvantage of the sequence structure: It must run to completion before anything else can happen.
    If you are building a state machine (typically a while loop with shift registers enclosing a case structure with one case per state) and having trouble with timing, then think about your requirements. Apparently you have some time delays, but under certain conditions you must terminate a delay/wait and do something else.  One way of doing this is to have a Wait state.  The wait state has a short delay, determined by the minimum time you can delay responding to a changed condition, and a check to see if the required elapsed time has occurred.  If the time has not elapsed, the next state is the Wait state again.  The state machine can repeat any state as often as necessary.  So a 15 second delay could be implemented by going to a Wait state with a one second wait 15 times. Any error or new command will see a response in no more than one second.
    Lynn

  • Any way to set iTunes for automatic updates?

    For example, if I have a "My Music" folder, and I copy over some MP3 files from wherever, is there a way to set iTunes to automatically "watch" that folder for new files and add them to the library when it finds them? I haven't been able to find a feature that does this.
    If not, why not? "Watch folders" have been in use for years on my other music players.

    No. Itunes has no such feature

  • Any way to set color for value in chart and still filter out values (but retain colors)?

    Is there any way that I can hard code a color into a chart and still filter out values?
    I have 5 divisions, each with a specific color.  I have put them into a stacked column chart and it looks fine.  My issue arises when I try to filter out some of the divisions.  The colors do not stay with the specified divisions.
    Ex.)
      Div 1 = Red
      Div 2 = Green
      Div 3 = Black
    When I filter out Div 1, this is what I see:
    Div 2 = Red
    Div 3 = Green
    I have tried standard delivered filter panel, and check-boxes using CHART_1.setDataSelection( )
    It seems like the color hard coding in the "additional" properties of the chart are not tied to the value, but are determined by sort order.  Any help is greatly appreciated

    Hi,
    There is one Possibility bu not By chart .
    It will look like chart but will use Text box .
    Lets say you have 5 Divisions & 3 Key figures .
    Then You need 5 * 3 = 15 Text box .
    Arrange them in 5 columns and 3 rows type of view .
    now .
    set fix width for all .
    set the height & position by coding
    You need to set this type of code for filter selection also .

  • Reminders are not appearing in Mail - and its the only way to set labels for flags.

    Every place I look for information about how to set the labels for flags in Mountain Lion Mail shows that they're editable once you click "show" next to "REMINDERS" in the sidebar. However, my sidebar has no "REMINDERS" heading, and there seems to be no preference or option anywhere related to this. I upgraded from Snow Leopard today; I had reminders showing (as "To Do's"). I really really want to change the labels on the flags because they're useless otherwise.
    Am I the only one with this problem?

    Flags and reminders are no longer coupled in Mountain Lion.  So I'll try to explain how to see your flagged messages.
    You can see a sidebar in Mail that looks like this.  Yours may not display the "Flagged" row yet.  I'll explain that in a minute,  If you don't see this sidebar, make it visible by clicking that arrow on top that would say "Show" if the sidebar were invisible (it says "Hide" here):
    You can flag a message by clicking the "Flag Selected Message" in your favorites bar, which should appear just above the screenshot.  Once you have at least one flagged message, the "Flagged" row shown above will appear.
    I hope this helps.

  • Correct way of setting styles for custom components

    Hey everyone,
                            I have a custom component which extends UIComponent and holds a image and a button. If I want to set the default style for my button where do I set it in the createChildren, stylesInitialized ,  updateDisplayList  or styleChanged ? I know styleChanged gets called first but the param is always null
    styleChanged = null
    stylesInitialized
    initialize
    createChildren
    initializationComplete
    commitProperties
    measure
    updateDisplayList
    Cheers,
    Firdosh

    Thanks for your recommendations. I have seen a lot of components (yahoo-astra e.g) call a static function or use Mixin (asfusion Rating Component)
    public class CustomComponent extends UIComponent {
              public static function initializeStyles():void
                   var styleDeclaration:CSSStyleDeclaration = StyleManager.getStyleDeclaration("BaseMultiFieldInput");
                   if(!styleDeclaration)
                        styleDeclaration = new CSSStyleDeclaration();
                   styleDeclaration.defaultFactory = function():void
                        this.backgroundColor = 0xffffff;
                        this.backgroundDisabledColor = 0xdddddd;
                        this.textAlign = TextFormatAlign.CENTER;
                        //other styles are based on the framework defaults
                   StyleManager.setStyleDeclaration("BaseMultiFieldInput", styleDeclaration, false);
              initializeStyles();
    is there a reasons why they are set in a static call?

  • No way to set ringtones for whatsapp

    How can i set a ringtone for whatsapp. I just get a short vibrate so miss all calls. There is no option in settings.
    Solved!
    Go to Solution.

    Which Phone would that be for? Addidionally, you may want to talk to WhatsApp support instead. This is not an app developed and/or maintained by Nokia.
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Linksys WRTU54G-TM on the way, best set up for use with my Airport Extremen

    I am about to sign up for T-Mobile at home which uses the Linksys WRTU54G-TM router for it's voip functions to connect to a standard phone. Currently I am on broadband (cable) internet using a Motorola surf board cable modem stashed away in my home networking cubby in my bedroom closet where it sends it's signal via cat 5e to the den where I hook up to my Airport Extreme and serve out the wireless signal.
    I want to put the Linksys in the closet too, basically in between my cable modem and my Airport Extreme so things will be basically the same. Now I have read a little about the Linksys and it does have the option to run in "bridge" mode as does the Airport Extreme, what I am wondering is what is the best option, make the Linksys the bridge and continue to let my Airport be the DHCP server or the other way around and let the Linksys be the DHCP and bridge my Airport.
    Sorry for the long question, anyone have any input?
    thanks,
    Danimal

    Thanks for the input Duane, I was also thinking along with same lines that the Linksys might need to be the DHCP as it is the VOIP Gateway. I will try both and see what happens.
    Luckily for me my home's infrastructure is a channel vision system that basically has a patch panel with a single input (combo RJ11 or RJ45) and 6 outputs. Currently I have the telco cat5e service line plugged into the input and then the rooms that I have phones in get their respective cat5e plugged into the output jacks. The cat5e cable to the office where the AEBS is located just goes straight into the cable modem.
    I had planned on using the RJ11 output of the Linksys and using a short phone cable plugging the other end into the input of the channel vision (after unplugging teclco's line) so I can distribute to the rooms with phones as is now.
    I guess ultimately the channel vision system could be better if it had a data side and a voice side instead of just having to use it for one or the other.

  • Any way to set StartDayOfWeek for Date Picker in af:inputDate

    In af:inputDate, First Day of Week varies in different locales, is there any way the Date Picker can show it correctly without formatting-locale?

    af:inputDate should do this automatically based on the browser's locale setting. Can you describe your use case in more detail where this is not the desired behavior?

  • GTK wiki - A way to set themes for GTK2 and GTK3 in XFCE

    Hi,
    I think I have something to add to the GTK page of the Arch wiki but I wanted to confirm if this works for others or if I just found an exception to the rule.  Anways, I was trying to figure out why some of my apps on XFCE were looking different than others and I came too the GTK page to find the section explaining that XFCE tries to use the same theme for both GTK 2 & 3 which causes errors if the theme you use isn't for both.
    Since I could not find a theme that I liked a lot that worked for both, I tried to manually fix the issue.  The way I did so was by simply making a new directory in the themes folder and copying all the files from the GTK 3 theme I liked and then replacing the gtk-2.0 folder with the folder of the theme for GTK2 that I liked.  This seems to be working flawlessly so I was wondering if I should add it to the wiki in the section that mentions the few themes that work for both GTK 2 & 3.
    I wasn't sure if the GTK wiki should have more XFCE specific information added or if this would be more appropriate in the XFCE wiki but I was thinking that since there is already mention of the problem and a potential solution on the GTK page, it might make sense to add it there.
    Can anyone confirm that this works for them as well or does anyone have objections to the addition to the GTK wiki?
    Last edited by boswbr25 (2012-05-28 21:47:14)

    I am not that familiar with this bug because I do not use xfce. But I would say adding it as a tip or similar on the xfce page would be the better place to put it as opposed to the gtk wiki.

  • Setting timeout for all the web test scripts in the solution

    Hello,
    I have around 16 web test scripts (using VSTS 2010 ultimate version) in my project (in a solution). By default the timeout set for each request is 60 sec. I need to increase the timeout to 180 sec. Currently, I am clicking on each request and modifying
    the timeout parameter from the Properties window.
    Is there any common setting for timeout available which would be acting across all the scripts?
    Thanks.

    Hello,
    We only can set Timeouts for a separate request in Visual Studio Web Test. There is no way to set Timeout for all requests in VS IDE. But you can write you own logic code using
    Timeout Property in a web test plugin to set Timeout for all requests in a web test.
    About how to write a web test plugin, please see:
    How to: Create a Web Performance Test Plug-In
    Best regards,
    Amanda Zhu <THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
    Thanks
    MSDN Community Support
    Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

  • Set password for code / no display

    hi all
               i have written some report 'z1'. i don't want other to view my code . is there any way to set password for my code ? is there any other solution.
    thanks
    bala

    If you hide the source as described in this posting, the program cannot be regenerated.  If any dictionary object that your program uses gets changed, then the system will mark your program as needing to be regenerated.  The next time it is executed, the system will attempt to regenerate, will fail to find the source code and therefore your program is unusable.
    You may also lose the ability to debug the program.
    You may also lose the ability for the dump manager to point out the line of code where a failure occurred.
    As long as you are okay with these restrictions, then go for it and let us know how it goes.

Maybe you are looking for