A way to test if report server work correctly

There is a way to test if report server work correctly ??

Ciao vampiro, did you try, from your browser
http://<server name or IP address>:7777/reports/rwservlet/showjobs?server=<your reports server>
or did you try to run test report from apps home (http://<server name or IP address>:7777)
The port 7777 could be different, depending on your installation.
If the above do not work, then for some reason the reports server could be down : did you try to restart it ?
BTW, what is your OS ?

Similar Messages

Removed iBook HD, any way to test it with another working iBook?

I have 2 iBooks, one experienced the famous 'logic board failure'. I have went through the whole 'shim' on the chip until it couldn't be 'shimmed' anymore. I have resorted to disassembling the iBook for parts. Here is the question(s):
1.) Can I purchase a IDE-to-USB cable and run diagnostic tests through my working iBook?
2.) Are these cables Apple specific or Windows specific?
3.) If the drive is operational, Can I make it into a "large" travel (thumb) drive? If so, any sites that offer a tutorial?
I am trying to fully recycle the old iBook. Any good modification recommendations for the Airport extreme card?, Screen?, Optical drive?, etc.

In regards to testing the drive, it might be more economical for future purposes to just buy a cheap external drive enclosure that supports USB or Firewire. You can plug in the HD you removed from the iBook and then attach as an external drive to another machine for testing. If it works, you would then have it already mounted in the enclosure and ready to use as an external HD in the future. The interface is currently non-specific to any type of computer. I don't know about a tutorial, but I don't know if the HD will function well as a travel drive. Granted, it did come from a laptop, but the drive once removed from the machine doesn't have access to the acceleration detectors to protect the drive from bumps and bangs.

Sort in Report not working correctly

I have a report with many sorts selected as an option within the reports attributes. However, some of the columns does not seem to be sorting at all when Selected (Others do as expected)
For example one column is a VARCHAR2
examples of values within this column would be
(FY08Q1, FY09Q4, FY08Q2)
with the sort ticked in the report attributes i would expected it to perform the following
FY08Q1
FY08Q2
FY09Q4
which it does in the SQL Command - just not in the report in the Application.
Anyone know as to a reason why it may be doing so?
cheers
s

Hi
I just created a test table, called datetest, with one column, called quarter. I inserted your data in the following order:
FY08Q1
FY09Q4
FY08Q2
I tested in SQLPlus that it returned ordered data ok with Select quarter from datetest order by 1, this worked.
I then created a simple report based upon the query used in the previous paragraph and the report ordered the data correctly, i.e:
FY08Q1
FY08Q2
FY09Q4
Can you post your query as I can't work out what is wrong here?
Thanks
Karen

DFSR Reporting " not working correctly

I'm trying to get the following script to work, posted questions at the site but not sure if he is viewing the blog anymore.
http://gallery.technet.microsoft.com/scriptcenter/10ca8b47-b0ec-4910-bdd7-52ce2d4bca41#conten
Couple of things is not working with Powershell reporting of DFSR, (works in batch file)
1) The DFSAdmin.exe reports "/Rgname:Domain is not a valid subobject" as I am trying to report on "Domain System Volume". It doesn't like the " and doesn't like spaces!
DfsrAdmin.exe Health New /RgName:`"Domain System Volume`" /RefMemName:$ReferralDC /RepName:$ReportFilePath /FsCount:true
Tried to use variable name instead but same result
$Rgname = "`"Domain System Volume`""
DfsrAdmin.exe Health New /RgName:$Rgname /RefMemName:$ReferralDC /RepName:$ReportFilePath /FsCount:true
2) parsing of report file name doesn't work either, I get "Send-MailMessage : Thew device is not ready.
If I do echo ($ReportFilePath+".html"), the result is correct as I replace the variable with result of the echo and it works!
$ReportFilePath = "d:\Reporting\Reports\Health-report-"+(Get-Date -UFormat %Y-%m-%d)
Send-MailMessage -From $EmailFrom -To $EmailTo -SmtpServer $SmtpServer -Subject $EmailSub -Body "The DFS-R Health Report is attched to this e-mail" -Attachments
($ReportFilePath+".html")
The is all on Windows 2008 R2

I've replaced dfsradmin.exe with showargs.exe in a home lab.....
I get the following result, (missing first ")
$Rgname = "Domain System Volume"
/RgName:Domain System Volume"
Changing the variable to following doesn't work either: (add a double quote)
$Rgname = "`"Domain System Volume"
Re-ran showargs.exe and display is correct but fails with dfsradmin.exe
Showargs.exe shows: "/RgName:"Domain System Volume"
DFSRadmin.exe still error out: The subobject "/RgName:"Domain is not a valid subobject.

Exchange 2013 Delivery Reports not working correctly

Hello,
I'm trying to use the "delivery reports" tool in ECP and it is not acting normally. Here's the situation:
When I try to search a mailbox ([email protected]) for mails that were sent to [email protected] (a distribution group) I only see results that were sent from [email protected] to [email protected] Not all the messages in [email protected]'s mailbox that were sent to [email protected]
So in summary, instead of showing all messages in that mailbox, it shows me all messages on [email protected]'s mailbox that were sent by [email protected] to [email protected]
I have used Exchange Online, which should be almost the same as Exchange 2013 but this was not the behavior before. Can this be a wrong setting somewhere? Can it be related to anti-spam (GFI) software on the serer? Any ideas?

Hi,
How did you use delivery reports tool to track messages ? Is it like below?
*Mailbox to Search: [email protected]
Search for messages sent to: [email protected]
In general, it will show all the messages in [email protected] which were sent to
[email protected], however, if the mailbox has applied any retention policys to delete emails or move the emails to local pst, it may cause your issue.
More information about "Delivery Reports" for your reference:
Track Messages with Delivery Reports
Thanks.
Niko Cheng
TechNet Community Support

Issues while migration reports to 2012 report server .

I am stuck in report server related issue . Following are steps and log files details for migrating report server database from 2005 to 2012 :-
Back up the encryption key for the report server database.
Back up the report server database a SQL Server database.
Back up the report server configuration files.
Restore the database from the backup created , As temporary database and the main database are depend so they should be restored together.
Start the Reporting Services Configuration tool and connect to the Reporting Services instance you just installed.
Configure URLs for the report server and Report Manager
Configure the report server database, selecting the existing report server database from your previous installation. After successful configuration, the report server services
will restart, and once a connection is made to the report server database, the database will be automatically upgraded to SQL Server 2012 Reporting Services.
As we were not able to figure out the password I tried another approach to test if the
report server works after deleting the encrypted data . I deleted encrypted data.
Error below is shown in log files when I try to access report manager .
Log Files Details:-
at Microsoft.ReportingServices.UI.FolderItems.LoadItems()
   at Microsoft.ReportingServices.UI.SortableItems.Control_Init(Object sender, EventArgs args)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.AddedControl(Control control, Int32 index)
   at Microsoft.ReportingServices.UI.FolderContentsPageCtrl.Control_Init(Object sender, EventArgs args)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.AddedControl(Control control, Int32 index)
   at Microsoft.ReportingServices.UI.SharedArea.Control_Init(Object sender, EventArgs args)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.AddedControl(Control control, Int32 index)
   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
ui!ReportManager_0-1!1e18!07/30/2012-05:17:31:: e ERROR: HTTP status code --> 200
-------Details--------
System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException:
An internal error occurred on the report server. See the error log for more details.
   at Microsoft.ReportingServices.Library.ReportingService2005Impl.ListChildren(String Item, Boolean Recursive, CatalogItemList& CatalogItems)
   at Microsoft.ReportingServices.WebServer.ReportingService2010.ListChildren(String ItemPath, Boolean Recursive, CatalogItem[]& CatalogItems)
   at Microsoft.ReportingServices.UI.FolderItems.LoadItems()
   at Microsoft.ReportingServices.UI.SortableItems.Control_Init(Object sender, EventArgs args)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.AddedControl(Control control, Int32 index)
   at Microsoft.ReportingServices.UI.FolderContentsPageCtrl.Control_Init(Object sender, EventArgs args)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.AddedControl(Control control, Int32 index)
   at Microsoft.ReportingServices.UI.SharedArea.Control_Init(Object sender, EventArgs args)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.AddedControl(Control control, Int32 index)
   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!160c!07/30/2012-05:17:31:: i INFO: Call to GetSystemPropertiesAction().
ui!ReportManager_0-1!1e18!07/30/2012-05:17:32:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
   at System.Threading.Thread.AbortInternal()
   at System.Threading.Thread.Abort(Object stateInfo)
   at System.Web.HttpResponse.End()
   at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)

Hello Manish,
I am sorry for my delay.
As we know, the service pack of SQL Server is free to download and install, and the latest SP for SQL server 2005 is SP4, so that Microsoft recommend that we migrate the service from SQL Server 2005 SP4 to SQL Server 2012. If you still want to upgrade the
service from SSRS 2005 SP3, we cannot guarantee that all features can work properly, and we did not test it yet. Therefore, I still recommend you upgrade the SQL server 2005 to SP4 if possible.
In addition, you can refer to the following article on MSDN to see whether it can meet your requirement. It is a general step to migrate the SSRS.
http://msdn.microsoft.com/en-us/library/ms143747.aspx
I hope it is helpful to you.
Regards,
Edward
Edward Zhu
TechNet Community Support

Reports Server: REP-3000

Hi all,
I have the following system setup:
OS: SuSE SLES-7 Linux
Kernel: 2.4.7-64GB-SMP
Memory: 1GB RAM
SWAP: 2GB
When I try to run the test report on the "Getting Started with Oracle9i Reports" I get the following error in a new Browser Window:
- Error
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
I don't want to use the standard X server. I decided to use Xvfb.
I performed the following steps:
- Shutdown of Oracle9iASr2, according to metalink note: 200475.1 (oracle)
- $ emctl stop
- $ webcachectl stop
- $ dcmctl shutdown
After that the 9iASr2 instance was sucessfully halted.
- Shutdown the standard X server which was running on display number 0 (root)
- Start Xfvb as root, according metalink note: 208745.1 (root)
- $ nohup /usr/bin/X11/Xvfb :50 -screen 0 1024x800x8 -pn -fp /usr/lib/X11/fonts/misc -sp /etc/X11/xserver/SecurityPolicy &
- $ DISPLAY=$(hostname):50.0; export DISPLAY
- $ /usr/X11R6/bin/xhost +
I also tested to execute the command xclock and I got no error.
- 9iASr2 config changes (oracle)
- Changed DISPLAY variable in .profile to the new value
- $ORACLE_HOME/bin/reports.sh
- DISPLAY=lindi:50; export DISPLAY
- $ORACLE_HOME/opmn/conf/opmn.xml
- <prop name="DISPLAY" value="localhost:50.0"/>
- This entry is in the OC4J_BI_Forms config tag. is that correct?
- Startup 9iASr2 (oracle)
- $ emctl start
- Connect to OEM and started the whole instance. All processed were sucessfull started
- I was able to connect to OEM, this means the Xvfb Frame Buffer is setup correctly otherwise I would not be able to connect to the EnterpriseManager. Is that correct?
- I was able to check the failed jobs in the reports server. That means the report server is running.
- I was able to run my forms application.
- I open the "Getting Started with Oracle9i Reports" page in a browser and got the error decribed above.
To me it seems that there has to be another DISPLAY variable I did not set correctly. Because when I start another X server with the user oracle on display 0 then I'm able to run the report sucessfully. But I don't want to start the standard X server, because then I need access to the console, and I not always have access to it.
Does anybody know what that could be and help me,
thanks
Oliver

Try the solution provided in the Release Notes Addendum section 5.10.15 (Component issues)
Anyway I am providing the notes here.
5.10.15 Reports in-process server gives REP-3000 error when running report
When running a sample report using the report in-process server, an error message
like the following can appear in the browser:
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
Use the following sample URL to test for this error message using the appropriate
hostname, domainname, port and two_task entries:
http://hostname.domainname:port/reports/rwservlet?report=test.rdf&userid=scott/t
iger@two_task&destype=cache&desformat=htmlcss
If the REP-3000 error message appears, the display is not set correctly. When
running a report server from the command line, the environment variable DISPLAY
setting is used. However, the reports in-process server uses the following
configuration file for the display setting:
$ORACLE_HOME/j2ee/OC4J_BI_Forms/config/oc4j.properties
The default display entry is as follows:
oracle.display=:0.0
On some servers, there might not be an X server running on :0.0 or this entry
might not be resolved correctly. In such cases, change the display setting to a
machine where an X server is present and can be accessed by this server.
To test whether an X server is running on given machine and you have permissions
to connect to it, you can use the following command:
xterm -display myserver:0.0
If you do not have permissions to access the display or if there is no such display
running on the given machine, an error similar to the following is displayed:
Xlib: connection to "myserver:0.0" refused by server
Xlib: Client is not authorized to connect to Server
xterm Xt error: Can't open display: myserver:0.0
Once you have identified a machine with a valid X server, or started the display on
the server machine being used, you can change the default entry to the new display.
For example to use the X server running on myserver:0.0 we would change the
default entry to:
oracle.display=myserver:0.0
After these changes are completed, it is necessary to restart the Forms/Reports oc4j
instance with the following commands:
$ cd $ORACLE_HOME/opmn/bin
$ ./opmnctl stopproc type=oc4j instancename=oc4j_bi_forms
$ ./opmnctl startproc type=oc4j instancename=oc4j_bi_forms
You can now test the sample URL again to make sure that the in-process server
works correctly. When using the sample URL, the sample test.rdf report should
be displayed in the browser.

Report Server and ORA-03135 - Connection Lost

Hello,
We are running Oracle 10gR2 (AppServer, Report Server and Database) and we notice that in the error log of the database, we getting many error ora-03135-Connection Lost. After investigating a bit on this, i think i found the cause of those error. Error seem to be generated by the report server everytime it automatically shutdown an engine because engine was not use in the last 30 min. Is there a way to prevent the report server to cause this error in the DB log file ?? maybe it is only a setting to change.
And we don`t want to extend the timeout of the engine to prevent it to shutdown automatically because this will cause memory issue on the server if engine always stay up
Thank
Martin

Use death connection detection in the sqlnet.ora file. Usually setting SQLNET.EXPIRE_TIME is used to catch firewall timeouts, but in your case you could use it to detect that the report engine was stopped. Set SQLNET.EXPIRE_TIME to a slighty higher value than 30 minutes, say 35 minutes. Then each 35 minutes a probe packet is send to test if the connection is still alive. If not then the RDBMS ends the connection.
cheers

.Forms [32 Bit] Version 10.1.2.0.2 (Production) report server.

hi
i have a question about Forms [32 Bit] Version 10.1.2.0.2 (Production) so many users are facing the problem in report server and even i faced the problem,
i started the report server and tried to display the report but it was giving me errors sometimes
REP-41213 unable to connect to report server and sometimes
REP-51002: Bind to Reports Server <servername> failed and so on.
but after using an ip address or MS loopback adaptor then it works perfect.
in Forms [32 Bit] Version 9.0.4.0.19 (Production) its working with machine name and we do not need ip address and also we can start report server by services.
But in Forms [32 Bit] Version 10.1.2.0.2 (Production) its not the same and all the time we start report server by command.
Is there any solution in Forms [32 Bit] Version 10.1.2.0.2 that run report server without ip or loopback but only work with a machine name?.
sarah

Hi Sarah,
my reports-server works all the time, and i did not do any configuration or install any loopback-adapter. I have a reports-server name like rep_<machine> and can use that in forms also as in URL-syntax.

As10g ver10.1.2 report server cann't run in aix ver5.3 system

Hi,all
IBM computer
aix ver5.3 system
as10g ver10.1.2
Report server cann't run,other servers work well,
the same verion application server 10g be installed in windows system,all servers include report server work well.
Why report server don't work in aix system?
Thanks for any help!
Message was edited by:
user565112

Hello,
Note.298175.1 Reports Server Fails To Start on AIX 5.3 in-process and Standalone
Regards

Reports not working after upgrade to SCCM 2012 R2 -

I am having the same issue described in this post:
http://social.technet.microsoft.com/Forums/en-US/30f185ac-c34e-44ad-87eb-7d180a0d76b8/after-2012-r2-upgrade-some-sql-queries-wont-run?forum=configmanagergeneral
When running reports after upgrading from SCCM 2012 SP1 CU2 to SCCM 2012 R2 I get the following error:
An
error has occurred during report processing. (rsProcessingAborted)
Cannot
read the next data row for the dataset DataSet1. (rsErrorReadingNextDataRow)
Conversion
failed when converting the nvarchar value
'S-1-5-21-1010966800-777871707-395339515-124623' to data type int.
I have removed the Reporting Services Point and reinstalled it with no effect. All reports I try get the error listed above.
Any suggestions?

The issue has been resolved. For anyone experiencing a similar issue I will post the fix that worked for us below:
I ended up opening a PSS case and in this instance the problem was the required SQL management provider was not properly registered in WMI, which ultimately meant the reporting point upgrade/install was not able to complete successfully after the upgrade.
As a result the updated reports were not properly being redeployed to the Reporting Service Point.
To diagnose this on the Reporting Service Point look in the srsrp.log for entries indicating of an
Invalid Class, as seen in the example below:
Invalid class SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
Could not retrieve the reporting service name for instance 'RPSERVER' SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
Invalid class SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
Could not stop the reporting service '' SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
Next security configuration at [11/6/2013 5:52:12 PM] SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Root Folder exists SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Successfully checked that the SRS web service is healthy on server SERVERRP.AD.DOMAIN SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Registry change SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
SRSRP registry key change notification triggered. SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Registry change SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
Timed Out... SMS_SRS_REPORTING_POINT 11/6/2013 5:48:13 PM 6096 (0x17D0)
The important part is the lines saying Invalid Class and then it timing out, so the RP installation was not completed.
As mentioned earlier the WMI class that was missing or corrupt was the SQL management Provider. To re-register the class we need to compile the MOF file that is available in SQL. In our instance the command to run was:
mofcomp "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
Once that was done, monitoring the srsrp.log shows that it could properly detect the SSRS service, stop it and start coping the updated reports and such. After a few minutes the deploy completed, and all the broken reports started working
correctly.
Hope that helps someone else.

[Forum FAQ] The Reporting Server cannot be reinstalled on a same SQL Server Reporting Service instance

Symptom: Sometimes, when you want to reinstall the Reporting Server Role for Operation Manager 2012,
but you may encounter an issue that the Reporting Server Role cannot be reinstalled after you successfully uninstall it. When you check the System Center Operation Manager installation log, you can find the following error as shown in Figure 1.
Figure 1: Reporting Server Role cannot be reinstalled
It seems that the SQL Server Reporting Service has not been configured properly. When you open Reporting Services Configuration Manager to check the settings, the settings seem fine though.
Even you recreate Reporting Service Database, the error remains.
After reviewing the OpsMgrSetupWizard.log, we get the following errors when wizard try to connect to SQL Server Reporting Instance (Figure 2).
[07:24:05]: Error: :CheckHttpAddressResponse failed: Threw Exception.Type: System.Net.WebException, Exception Error Code: 0x80131509, Exception.Message:
The remote server returned an error: (500) Internal Server Error.
[07:24:05]: Error: :StackTrace: at System.Net.HttpWebRequest.GetResponse() at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckHttpResponseFromSRSUrl(String
httpSite)
Figure 2: Error Log -1
It indicates the Reporting Service encounters an internal error. The Website cannot handle the request. So you may check the Reporting Service log which is located in C:\Users\Administrator.SCOM2012\AppData\Local\SCOM\LOGS
and the following errors may be found (Figure 3).
library!ReportServer_0-18!1448!03/30/2014-02:53:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
Unable to load assembly Microsoft.EnterpriseManagement.Reporting.Security, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. ---> System.IO.FileNotFoundException:
Could not load file or assembly 'Microsoft.EnterpriseManagement.Reporting.Security' or one of its dependencies. The system cannot find the file specified.
File name: 'Microsoft.EnterpriseManagement.Reporting.Security'
Figure 3: Error Log -2
Reason: After the Reporting Server is installed on a SSRS instance, the Reporting Server of SCOM
needs to modify the web.config and rsreportserver.config file to add its own assembly to make the Reporting Server work. But it does not change it back when Reporting Server is uninstalled. So the assembly cannot be loaded and the SSRS cannot respond
our requests.
Resolution: When the Reporting Server is installed, the old web.config and rsreportsserver.config
files will be backed up to web.config1 and rsreportsserver.config1. So you just need to change the files’ name back, then try to install Reporting Server of SCOM again. Everything would go smoothly.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi AakashGhare,
According to your error message, SQL Server 2008 databases are version 655. SQL Server 2008 R2 databases are 661. When you are trying to attach an 2008 R2 database (v. 661) to an 2008 instance and this is not supported. As other post, once the database has
been upgraded to an 2008 R2 version, it cannot be downgraded. You'll have to either upgrade your 2008 SP2 instance to R2, or you have to copy out the data in that database into an 2008 database (such as using the data migration wizard).
In addition, if you want to use a Windows Batch file code and command to automatically login to SQL Server, detach database and attach a new one database, there is a similar details about batch code for attaching database to a new database, you can refer
to this article.
http://notesbyparth.wordpress.com/2012/06/29/run-sql-commands-from-windows-batch-file-or-attachdetach-database-automatically-using-batch-script/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Unable to start report server on NT

I have installed Developer 6.0 (everything option) and I am
having trouble starting the report server (non-web method).
I installed it as an NT service and tried to start it and I also
tried the command line method: rwmts60 -listen mydatabase
I get the same error with both methods of launching the server:
REP-0186: Daemon failed to listen to port.
The troubleshooting docs point to a problem with the tnsnames.ora
or sqlnet.ora, but I am sure they are fine because I can connect
to the database via sqlplus and SQL Navigator.
Developer 6.0 is installed on NT 4.0 and the database is on a
Solaris machine running Oracle 7.3.4.0.1.
Any pointers would be greatly appreciated.
Thanks;
Emad
null

Emad ElHamahmy (guest) wrote:
: I have installed Developer 6.0 (everything option) and I am
: having trouble starting the report server (non-web method).
: I installed it as an NT service and tried to start it and I
also
: tried the command line method: rwmts60 -listen mydatabase
: I get the same error with both methods of launching the server:
: REP-0186: Daemon failed to listen to port.
: The troubleshooting docs point to a problem with the
tnsnames.ora
: or sqlnet.ora, but I am sure they are fine because I can
connect
: to the database via sqlplus and SQL Navigator.
: Developer 6.0 is installed on NT 4.0 and the database is on a
: Solaris machine running Oracle 7.3.4.0.1.
: Any pointers would be greatly appreciated.
: Thanks;
: Emad
Hello, Emad
I had the same problem until I called Oracle TechSupport and
here's what they told me to do:
(Assuming you are starting from scratch and Reports Queue
Manager is available)
1. In tnsnames.ora add this line(no spaces):
%report_server_name%.%your domain%)=(ADDRESS=(PROTOCOL=TCP)
(HOST=%YOUR_TCPIP_ADDRESS%)(PORT=1949)
2. At cmd prompt type the following:
rwmts60 -install %report_server_name% tcpip
3. Install reports server(answer yes after completing step 2).
4. Go to control->panel->services select Oracle %
your_report_server_name% and click startup select log on
as='This Account' and select account. Then startup the service.
5. Open reports queue manager(make sure status says='running')
select job->new, and you are home free...
P.S. To test your reports server,at cmd prompt type :
rwcli60 report=c:/orant/bin/testreport.rdf userid=%
user/passw@sid% server=%report_server_name% destype=file
desname=test.pdf desformat=pdf.
Hope it helps...
Berta L.
null

Report server is not working in version 10.1.2....

Hi all
From long time i am trying to run the report server in Forms [32 Bit] Version 10.1.2.0.2 (Production) without Network( IP) configuration.But i did not do it.But
its working fine with IP address.Is it possible to run report server without IP addresss? Help me out thanks in advance.
sarah

In rwnetwork.conf in $oh/reports/
- remove or commented the following
<multicast channel="228.5.6.7" port="14021" timeout="1000" retry="3"/>
- And then uncommented
<namingService name="Cos" host="%NAMING_HOST%" port="%NAMING_PORT%"/>
- replace the
%NAMING_HOST% with your computer name or specify an IP address
%NAMING_PORT% with 14021
execute in the command line : namingservice.bat 14021
(To shutdown the namingservice, use : namingservice.bat 14021 shutdown)
try restarting the reports server and test ..
hope it helps

Report works on CR Developer XI but not on Crystal Reports Server

I have a crystal report I created in Crystal Reports Developer XI that uses a command. The code is as follows:
select     supplier.supplier_sc, price_list.supplier_id, doc_line.doc_head_sc, product.product_id, product.product_n, price_list.unit_price, price_list.price_list_id,convert(varchar(50),product.product_n)+ ': $' + convert(varchar(50),price_list.unit_price)
from     price_list, supplier, product, doc_line
where     price_list.supplier_id = supplier.supplier_id AND
          price_list.product_id = doc_line.product_id AND
          supplier.supplier_id = price_list.supplier_id AND
          price_list.product_id = product.product_id AND
          doc_line.doc_head_sc like 'REQ%'
I've tested this in SQL directly and it works as expected. Furthermore in Crystal Reports Developer XI it works fine there too. Basically the calculated column reprsented by the code: (convert(varchar(50),product.product_n) ': $' + convert(varchar(50),price_list.unit_price)+ shows up as the following as a sub-parameter for my test example:
Dell 1600 Printer: $125.00
Dell 1600 Printer: $150.00
But once it is published to Crystal Reports Server, it shows up as:
Dell 1600 Printer
Dell 1600 Printer
It isn't combining the columns as expected. This particular sub-parameter is supposed to pull the product name and all the various price list amounts for the particular supplier chosen earlier. I've tried re-publishing it, but to no avail. What am I doing wrong?
I'm running Crystal Reports Developer XI 11.0.0.1282 and Crystal Reports Server 11.5 in case that is relevant.

Moved to BOE forums.

A way to test if report server work correctly

Similar Messages

Maybe you are looking for